Solas PRO4 Rubex Propeller E/J 90-300 HP

SOLAS PRO4 Rubex Propeller 90-300 HP Evinrude Johnson Outboards and Model 800 Sterndrives.

Designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS Stainless Propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements.

Every PRO4 RUBEX stainless steel boat propeller has a rubber interchangeable hub system. It is designed to eliminate chatter and vibration that competitive hub systems are prone to. Being rubber, the RUBEX hub has no plastics to deteriorate. It can deflect 10% for softer shifting and to reduce prop shaft shock when the propeller strikes a submerged object. The RUBEX hub will not spin in the propeller. SOLAS RUBEX Hub systems aluminum or bronze will fit the same propeller application.

Aluminum hubs are suggested for 60-150 HP, while bronze hubs are recommended for 150-350 horsepower.

Requires SOLAS RBX Hub Kit (Bronze or Aluminum)
Thru Hub Exhaust 
15 Tooth Spline
V-6 Gearcase

Evinrude/Johnson RUBEX Hub Fitments:

RBX100 or RBX100B 1991 & Newer 
RBX101 1990 & Older 
RBX104B 200 & 225 4-Stroke 2004-2005 
RBX151B 150-300 ETEC G2

Engine Fitments for 90-300hp Evinrude/Johnson, E-Tec, E-Tec G2 Outboards & OMC Cobra 800 Sterndrives.

90 HP ETEC (25" Shaft)
90,115,130,150,175,200,225,250 HP 1978 & Newer
100,150,155 HP Commercial 1978 & Newer
120-140 HP 1985
140 HP (25") 1989-94
185 HP 1984-85
235 HP 1978-85
275 HP 1986-88
300 HP 1986-95
300 HP E-Tec 2009 & Newer
Includes all 90-300hp E-Tec & E-Tec HO fitments & 150-300 ETEC G2 2014 & Newer
OMC Model 800, King Cobra & Cobra (Non SX Drive) 3.0L-8.2L Sterndrives.

SOLAS PRO4 Propeller Features:

SAV Solas Adjustable Vent System

Longer barrel, increased camber and cupping

Excellent acceleration and mid-range performance

Great choice for offshore boats

Better efficiency than smaller diameter propellers

Universal Rubex Hub Propeller

Available in Right and left-hand rotation

Propeller pitch range 18 thru 28

SOLAS Lab finished propellers are blue-printed propellers that go through a 40-point inspection. The result is a perfectly balanced propeller with flawlessly matched cupping across every blade and a custom blade thickness. The enemy of every boat and propeller is drag, lab finished propellers are finely tuned to eliminate drag.

The Pro Series has additional polishing and blade thinning to create sharper blades that will cut through the water better and raise rpms to gain more top speed. The longer barrel improves performance and decreases cavitation by allowing air and water created from the blades to easily flow behind the propeller and decrease drag. With the Pro Series adjustable vents, you can fine tune the performance and decrease planning time. The camber, or arch of the blade is more aggressive on the Pro Series which allows it to push back more water and reach higher speeds.

All this combined means there will be consistency in RPM when running on a multi-engine setup, and in most applications the Pro Series propeller will deliver higher top-end speed than a Standard Finish propeller.