Getaprop spurs line cutter http://www.getaprop.com/ Sat, 26 May 2012 14:31:43 -0500 en Spurs Line Cutter Model A Fits 3/4 Thru 1 1/4" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:3/4" Thru 1 1/4" Cutter Hub Diameter:2" Cutter Width:15/16" Min. Space To Install:1 1/8" Cutter Outside Diameter 4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1703/spurs_line_cutter_model_a.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1703/spurs_line_cutter_model_a.html