spurs, spurs line cutter, spurs cutters, spurs marine, propeller line cutters, spurs propeller line cutters, spurs cutter, spurs line cutters, prop line cutter, propeller line cutter http://www.getaprop.com/content-categories/cat-391_957/spurs_metric.html Sat, 26 May 2012 14:20:28 -0500 en Spurs Line Cutter Model F1 Fits 75mm Thru 115mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:75mm Thru 115mm Cutter Hub Diameter:165mm Cutter Width:40mm Min. Space To Install:45mm Cutter Outside Diameter: 280mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1800/spurs_line_cutter_model_f1.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1800/spurs_line_cutter_model_f1.html Spurs Line Cutter Model F Fits 60mm Thru 90mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:60mm Thru 90mm Cutter Hub Diameter:140mm Cutter Width:40mm Min. Space To Install:45mm Cutter Outside Diameter:254mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1794/spurs_line_cutter_model_f.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1794/spurs_line_cutter_model_f.html Spurs Line Cutter Model E Fits 50mm Thru 75mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:70mm Cutter Hub Diameter:110mm Cutter Width:37mm Min. Space To Install:43mm Cutter Outside Diameter: 194mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1792/spurs_line_cutter_model_e.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1792/spurs_line_cutter_model_e.html Spurs Line Cutter Model D Fits 40mm Thru 55mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:40mm Thru 55mm Cutter Hub Diameter:98mm Cutter Width:36mm Min. Space To Install:41mm Cutter Outside Diameter: 171mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1787/spurs_line_cutter_model_d.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1787/spurs_line_cutter_model_d.html Spurs Line Cutter Model C Fits 40mm Thru 50mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:40mm Thru 50mm Cutter Hub Diameter:86mm Cutter Width:35mm Min. Space To Install:39mm Cutter Outside Diameter: 152mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1782/spurs_line_cutter_model_c.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1782/spurs_line_cutter_model_c.html Spurs Line Cutter Model B Fits 20mm Thru 40mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:20mm Thru 40mm Cutter Hub Diameter:67mm Cutter Width:27mm Min. Space To Install:32mm Cutter Outside Diameter:123mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1778/spurs_line_cutter_model_b.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1778/spurs_line_cutter_model_b.html Spurs Line Cutter Model A Fits 20mm Thru 30mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:20mm Thru 30mm Cutter Hub Diameter:51mm Cutter Width:24mm Min. Space To Install:30mm Cutter Outside Diameter: 120mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1773/spurs_line_cutter_model_a.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1773/spurs_line_cutter_model_a.html The above are actual diagrams of the wedge holding blocks that are available. In most cases, they are interchangeable with cutters of different mold types. They are selected for the best height match to secure the wedge portion of the stationary cutter. Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-7756/wedge_holding_block_sizes.html http://www.getaprop.com/images/products/SPURS.JPG http://www.getaprop.com/content-product_info/product_id-7756/wedge_holding_block_sizes.html Measurements Needed To Place Order: (Right click on enlarged image to print) A-Shaft Diameter B-Propeller Hub Diameter C-Space Between Propeller And Stern Bearing D-Stern Tube Or Strut Hub Diameter E-Length Of Exposed Taper The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. http://www.getaprop.com/content-product_info/product_id-7687/measurements_for_installation.html http://www.getaprop.com/images/products/view_shaft[1].jpg http://www.getaprop.com/content-product_info/product_id-7687/measurements_for_installation.html