spurs, spurs line cutter, spurs cutters, spurs marine, propeller line cutters, spurs propeller line cutters, spurs cutter, spurs line cutters, prop line cutter, propeller line cutter http://www.getaprop.com/content-categories/cat-391_956/spurs_inch.html Sat, 26 May 2012 14:20:20 -0500 en Spurs Line Cutter Model F3 Fits 4"Thru 6 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:4" Thru 6 1/2" Cutter Hub Diameter:9 1/2" Cutter Width:1 7/8" Min. Space To Install:2 1/8" Cutter Outside Diameter: 15 3/4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1769/spurs_line_cutter_model_f3.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1769/spurs_line_cutter_model_f3.html Spurs Line Cutter Model F2 Fits 3" Thru 5 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:3" Thru 5 1/2" Cutter Hub Diameter:7 7/8" Cutter Width:1 11/16" Min. Space To Install:1 7/8" Cutter Outside Diameter: 13 1/2" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1765/spurs_line_cutter_model_f2.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1765/spurs_line_cutter_model_f2.html Spurs Line Cutter Model F1 Fits 3" Thru 4 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter: 3" Thru 4 1/2" Cutter Hub Diameter:6 1/2" Cutter Width:1 9/16" Min. Space To Install:1 3/4" Cutter Outside Diameter: 11" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1758/spurs_line_cutter_model_f1.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1758/spurs_line_cutter_model_f1.html Spurs Line Cutter Model F Fits 2 1/4" Thru 3 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:2 1/4" Thru 3 1/2" Cutter Hub Diameter:5 1/2" Cutter Width:1 9/16" Min. Space To Install:1 3/4" Cutter Outside Diameter:10" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1754/spurs_line_cutter_model_f.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1754/spurs_line_cutter_model_f.html Spurs Line Cutter Model E Fits 2" Thru 3" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:2" Thru 3" Cutter Hub Diameter:4 3/8" Cutter Width:1 1/2" Min. Space To Install:1 11/16" Cutter Outside Diameter: 7 5/8" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1745/spurs_line_cutter_model_e.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1745/spurs_line_cutter_model_e.html Spurs Line Cutter Model D Fits 1 1/2" Thru 2 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:1 1/2" Thru 2 1/2" Cutter Hub Diameter:3 7/8" Cutter Width:1 7/16" Min. Space To Install:1 5/8" Cutter Outside Diameter: 6 3/4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1740/spurs_line_cutter_model_d.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1740/spurs_line_cutter_model_d.html Spurs Line Cutter Model C Fits 1 1/2" Thru 2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:1 1/2" Thru 2" Cutter Hub Diameter:3 3/8" Cutter Width:1 3/8" Min. Space To Install:1 9/16" Cutter Outside Diameter: 6" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1714/spurs_line_cutter_model_c.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1714/spurs_line_cutter_model_c.html Spurs Line Cutter Model B Fits 1" Thru 1 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter: 1" Thru 1 1/2" Cutter Hub Diameter:2 5/8" Cutter Width:1 1/16" Min. Space To Install:1 1/4" Cutter Outside Diameter: 5" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1708/spurs_line_cutter_model_b.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1708/spurs_line_cutter_model_b.html Spurs Line Cutter Model A Fits 3/4 Thru 1 1/4" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:3/4" Thru 1 1/4" Cutter Hub Diameter:2" Cutter Width:15/16" Min. Space To Install:1 1/8" Cutter Outside Diameter 4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1703/spurs_line_cutter_model_a.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1703/spurs_line_cutter_model_a.html The above are actual diagrams of the wedge holding blocks that are available. In most cases, they are interchangeable with cutters of different mold types. They are selected for the best height match to secure the wedge portion of the stationary cutter. Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-7755/wedge_holding_block_sizes.html http://www.getaprop.com/images/products/SPURS.JPG http://www.getaprop.com/content-product_info/product_id-7755/wedge_holding_block_sizes.html Measurements Needed To Place Order: (Right click on enlarged image to print) A-Shaft Diameter B-Propeller Hub Diameter C-Space Between Propeller And Stern Bearing D-Stern Tube Or Strut Hub Diameter E-Length of Exposed Taper The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. http://www.getaprop.com/content-product_info/product_id-7684/measurements_for_installation.html http://www.getaprop.com/images/products/view_shaft[1].jpg http://www.getaprop.com/content-product_info/product_id-7684/measurements_for_installation.html