prop protector, prop protector line cutter, line cutters, boat shaft line cutters, propellers line cutters, propeller line cutter, boat propeller line cutter, line cutter, prop line cutter http://www.getaprop.com/content-categories/cat-391_877/prop_protector_inch.html Sat, 26 May 2012 14:20:10 -0500 en Slide on Type... 4.72" Blade Dia. 1 3/4"-2" shafts... Manufactured in one piece with a width of only 0.47" (12mm), it is designed for installations where the gap between the propeller and the shaft bearing is small. A gap of 0.7" (18mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It simply slides onto the shaft after the propeller has been removed and is secured with a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:4.72" Unit Width:0.47" Min. Gap:0.7" http://www.getaprop.com/content-product_info/product_id-6932/prop_protector_4_72.html http://www.getaprop.com/images/products/no2[1][1].JPG http://www.getaprop.com/content-product_info/product_id-6932/prop_protector_4_72.html Slide on Type... 3.15" Blade Dia, 3/4"-1 1/4" shafts... Manufactured in one piece with a width of only 0.47" (12mm), it is designed for installations where the gap between the propeller and the shaft bearing is small. A gap of 0.7" (18mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It simply slides onto the shaft after the propeller has been removed and is secured with a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:3.15" Unit Width:0.47" Min. Gap:0.7" http://www.getaprop.com/content-product_info/product_id-6930/prop_protector_3_15.html http://www.getaprop.com/images/products/no2[1][1].JPG http://www.getaprop.com/content-product_info/product_id-6930/prop_protector_3_15.html Slide on Type... 3.94" Blade Dia, 1 1/4"-1 1/2" shafts... Manufactured in one piece with a width of only 0.47" (12mm), it is designed for installations where the gap between the propeller and the shaft bearing is small. A gap of 0.7" (18mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It simply slides onto the shaft after the propeller has been removed and is secured with a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:3.94" Unit Width:0.47" Min. Gap:0.7" http://www.getaprop.com/content-product_info/product_id-6931/prop_protector_3_94.html http://www.getaprop.com/images/products/no2[1][1].JPG http://www.getaprop.com/content-product_info/product_id-6931/prop_protector_3_94.html Clamp on Type... 4.13" Blade Dia, 1 3/4"-2" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:4.13" Unit Width:0.67" Min. Gap:0.9" http://www.getaprop.com/content-product_info/product_id-6936/prop_protector_4_13.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6936/prop_protector_4_13.html Clamp on Type... 7.48" Blade Dia, 2 3/4"-4" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:7.48" Unit Width:1.3" Min. Gap:1.77" http://www.getaprop.com/content-product_info/product_id-6940/prop_protector_7_48.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6940/prop_protector_7_48.html Clamp on Type... 6.00" Blade Dia, 1 1/2"-2 1/2" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:6.00" Unit Width:1.18" Min. Gap:1.65" http://www.getaprop.com/content-product_info/product_id-6939/prop_protector_6_00.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6939/prop_protector_6_00.html Clamp on Type... 5.00" Blade Dia, 1 3/4"-2" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:5.00" Unit Width:0.67" Min. Gap:0.9" http://www.getaprop.com/content-product_info/product_id-6937/prop_protector_5_00.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6937/prop_protector_5_00.html Clamp on Type... 4.57" Blade Dia, 2 1/4"-2 1/2" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:4.57" Unit Width:0.87" Min. Gap:1.26" http://www.getaprop.com/content-product_info/product_id-6938/prop_protector_4_57.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6938/prop_protector_4_57.html Clamp on Type... 3.74" Blade Dia, 1 3/8"-1 1/2" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:3.74" Unit Width:0.67" Min. Gap:0.9" http://www.getaprop.com/content-product_info/product_id-6935/prop_protector_3_74.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6935/prop_protector_3_74.html Clamp on Type... 3.35" Blade Dia, 1 1/8"-1 1/4" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:3.35" Unit Width:0.67" Min. Gap:0.9" http://www.getaprop.com/content-product_info/product_id-6934/prop_protector_3_35.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6934/prop_protector_3_35.html Clamp on Type... 3.15" Blade Dia, 3/4"-1" shafts... Supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller. The width is 0.67" (17mm). A gap of 0.9" (23mm) is sufficient; this includes 1/4" (6mm) of space for water to circulate to the shaft bearing. It is clamped onto the shaft by two Allen screws and is also fixed by a set screw that locates into a small drill dimple made in the shaft. Blade Diameter:3.15" Unit Width:0.67" Min. Gap:0.9" http://www.getaprop.com/content-product_info/product_id-6933/prop_protector_3_15.html http://www.getaprop.com/images/products/no1[1][2][2].jpg http://www.getaprop.com/content-product_info/product_id-6933/prop_protector_3_15.html