flexofold folding sailboat propeller is the most efficient, lowest drag folding propeller you can buy. based on tests conducted over several years and reinforced by sailboat builders and owners http://www.getaprop.com/content-categories/cat-387_968/flex_o_fold_propellers.html Sat, 26 May 2012 14:15:12 -0500 en 20" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 1" thru 1 1/2" & Metric tapers 25mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7793/flex_o_fold_sailboat_propeller_20.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7793/flex_o_fold_sailboat_propeller_20.html 20" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 1" thru 1 1/2" & Metric tapers 25mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7799/flex_o_fold_sailboat_propeller_20.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7799/flex_o_fold_sailboat_propeller_20.html 18" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7792/flex_o_fold_sailboat_propeller_18.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7792/flex_o_fold_sailboat_propeller_18.html 18" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7798/flex_o_fold_sailboat_propeller_18.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7798/flex_o_fold_sailboat_propeller_18.html 17" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7791/flex_o_fold_sailboat_propeller_17.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7791/flex_o_fold_sailboat_propeller_17.html 17" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7797/flex_o_fold_sailboat_propeller_17.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7797/flex_o_fold_sailboat_propeller_17.html 16" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7790/flex_o_fold_sailboat_propeller_16.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7790/flex_o_fold_sailboat_propeller_16.html 16" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7796/flex_o_fold_sailboat_propeller_16.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7796/flex_o_fold_sailboat_propeller_16.html 15" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7789/flex_o_fold_sailboat_propeller_15.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7789/flex_o_fold_sailboat_propeller_15.html 15" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7795/flex_o_fold_sailboat_propeller_15.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7795/flex_o_fold_sailboat_propeller_15.html 14" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7788/flex_o_fold_sailboat_propeller_14.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7788/flex_o_fold_sailboat_propeller_14.html 14" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7794/flex_o_fold_sailboat_propeller_14.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7794/flex_o_fold_sailboat_propeller_14.html 13" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7787/flex_o_fold_sailboat_propeller_13.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7787/flex_o_fold_sailboat_propeller_13.html 12" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7785/flex_o_fold_sailboat_propeller_12.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7785/flex_o_fold_sailboat_propeller_12.html 18" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7803/flex_o_fold_racing_propeller_18.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7803/flex_o_fold_racing_propeller_18.html 17" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7802/flex_o_fold_racing_propeller_17.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7802/flex_o_fold_racing_propeller_17.html 16" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7801/flex_o_fold_racing_propeller_16.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7801/flex_o_fold_racing_propeller_16.html 15" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7800/flex_o_fold_racing_propeller_15.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7800/flex_o_fold_racing_propeller_15.html