sleeve bearings, bronze sleeve bearings, sleeve bearing, bronze sleeve bearing, cutlass bearing, cutlass bearings, cutless bearings, duramax bearings, duramax bearing, duramax marine http://www.getaprop.com/content-categories/cat-385_455/brass_sleeve.html Sat, 26 May 2012 14:09:52 -0500 en 1 1/2 " x 2 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/2" Outside Diameter: 2 3/8" Length" 6" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1287/duramax_sleeve_bearing_brad.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1287/duramax_sleeve_bearing_brad.html 1" x 1 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1" Outside Diameter: 1 1/4" Length" 4" Wall Thickness: 3/64" http://www.getaprop.com/content-product_info/product_id-1267/duramax_sleeve_bearing_back.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1267/duramax_sleeve_bearing_back.html 6" x 7 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 6" Outside Diameter: 7 1/2" Length" 24" Wall Thickness: 1/4" http://www.getaprop.com/content-product_info/product_id-1320/duramax_sleeve_bearing_gale.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1320/duramax_sleeve_bearing_gale.html 5 1/2" x 7" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 5 1/2" Outside Diameter: 7" Length" 22" Wall Thickness: 1/4" http://www.getaprop.com/content-product_info/product_id-1319/duramax_sleeve_bearing_find.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1319/duramax_sleeve_bearing_find.html 5" x 6 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 5" Outside Diameter: 6 1/2" Length" 20" Wall Thickness: 1/4" http://www.getaprop.com/content-product_info/product_id-1318/duramax_sleeve_bearing_fact.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1318/duramax_sleeve_bearing_fact.html 5" x 6 1/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 5" Outside Diameter: 6 1/8" Length" 20" Wall Thickness: 1/4" http://www.getaprop.com/content-product_info/product_id-1317/duramax_sleeve_bearing_face.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1317/duramax_sleeve_bearing_face.html 4 3/4" x 6 1/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 4 3/4" Outside Diameter: 6 1/8" Length" 19" Wall Thickness: 1/4" http://www.getaprop.com/content-product_info/product_id-1316/duramax_sleeve_bearing_ever.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1316/duramax_sleeve_bearing_ever.html 4 1/2" x 5 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 4 1/2" Outside Diameter: 5 1/2" Length" 18" Wall Thickness: 3/16" http://www.getaprop.com/content-product_info/product_id-1315/duramax_sleeve_bearing_epic.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1315/duramax_sleeve_bearing_epic.html 4 1/2" x 5 3/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 4 1/2" Outside Diameter: 5 3/4" Length" 18" Wall Thickness: 3/16" http://www.getaprop.com/content-product_info/product_id-1314/duramax_sleeve_bearing_edge.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1314/duramax_sleeve_bearing_edge.html 4" x 5 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 4" Outside Diameter: 5 1/4" Length" 16" Wall Thickness: 3/16" http://www.getaprop.com/content-product_info/product_id-1313/duramax_sleeve_bearing_ease.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1313/duramax_sleeve_bearing_ease.html 4" x 5" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 4" Outside Diameter: 5" Length" 16" Wall Thickness: 3/16" http://www.getaprop.com/content-product_info/product_id-1312/duramax_sleeve_bearing_earn.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1312/duramax_sleeve_bearing_earn.html 3 3/4" x 5 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 3/4" Outside Diameter: 5 1/4" Length" 15" Wall Thickness: 3/16 http://www.getaprop.com/content-product_info/product_id-1311/duramax_sleeve_bearing_draw.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1311/duramax_sleeve_bearing_draw.html 3 3/4" x 5" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 3/4" Outside Diameter: 5" Length" 15" Wall Thickness: 3/16 http://www.getaprop.com/content-product_info/product_id-1310/duramax_sleeve_bearing_dove.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1310/duramax_sleeve_bearing_dove.html 3 3/4" x 4 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 3/4" Outside Diameter: 4 1/2" Length" 15" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1309/duramax_sleeve_bearing_done.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1309/duramax_sleeve_bearing_done.html 3 1/2" x 4 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 1/2" Outside Diameter: 4 1/2" Length" 14" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1308/duramax_sleeve_bearing_dock.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1308/duramax_sleeve_bearing_dock.html 3 1/2" x 4 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 1/2" Outside Diameter: 4 1/4" Length" 14" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1307/duramax_sleeve_bearing_dine.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1307/duramax_sleeve_bearing_dine.html 3 1/4" x 4 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 1/4" Outside Diameter: 4 1/4" Length" 13" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1306/duramax_sleeve_bearing_dell.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1306/duramax_sleeve_bearing_dell.html 3 1/4" x 4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3 1/4" Outside Diameter: 4" Length" 13" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1305/duramax_sleeve_bearing_darn.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1305/duramax_sleeve_bearing_darn.html 3" x 4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3" Outside Diameter: 4" Length" 12" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1304/duramax_sleeve_bearing_dare.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1304/duramax_sleeve_bearing_dare.html 3" x 3 3/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3" Outside Diameter: 3 3/4" Length" 12" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1303/duramax_sleeve_bearing_dane.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1303/duramax_sleeve_bearing_dane.html 2 3/4" x 3 3/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 3/4" Outside Diameter: 3 3/4" Length" 11" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1302/duramax_sleeve_bearing_curd.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1302/duramax_sleeve_bearing_curd.html 2 3/4" x 3 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 3/4" Outside Diameter: 3 1/2" Length" 11" Wall Thickness: 5/32" http://www.getaprop.com/content-product_info/product_id-1301/duramax_sleeve_bearing_cube.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1301/duramax_sleeve_bearing_cube.html 2 3/4" x 3 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 3/4" Outside Diameter: 3 3/8" Length" 11" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1300/duramax_sleeve_bearing_crow.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1300/duramax_sleeve_bearing_crow.html 2 1/2" x 3 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/2" Outside Diameter: 3 1/2" Length" 10" Wall Thickness: 5/32" http://www.getaprop.com/content-product_info/product_id-1299/duramax_sleeve_bearing_cove.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1299/duramax_sleeve_bearing_cove.html 2 1/2" x 3 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/2" Outside Diameter: 3 3/8" Length" 10" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1298/duramax_sleeve_bearing_corn.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1298/duramax_sleeve_bearing_corn.html 2 1/2" x 3 1/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/2" Outside Diameter: 3 1/8" Length" 10" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1297/duramax_sleeve_bearing_cord.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1297/duramax_sleeve_bearing_cord.html 2 1/4" x 3 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/4" Outside Diameter: 3 3/8" Length" 9" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1296/duramax_sleeve_bearing_case.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1296/duramax_sleeve_bearing_case.html 2 1/4" x 3 1/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/4" Outside Diameter: 3 1/8" Length" 9" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1295/duramax_sleeve_bearing_cart.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1295/duramax_sleeve_bearing_cart.html 2 1/4" x 2 15/16" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/4" Outside Diameter: 2 15/16" Length" 9" Wall Thickness: 3/32" http://www.getaprop.com/content-product_info/product_id-1294/duramax_sleeve_bearing_care.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1294/duramax_sleeve_bearing_care.html 2 1/4" x 3" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2 1/4" Outside Diameter: 3" Length" 9" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1293/duramax_sleeve_bearing_card.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1293/duramax_sleeve_bearing_card.html 2" x 2 3/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2" Outside Diameter: 2 3/4" Length" 8" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1292/duramax_sleeve_bearing_camp.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1292/duramax_sleeve_bearing_camp.html 2" x 3" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2" Outside Diameter: 3" Length" 8" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1291/duramax_sleeve_bearing_calm.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1291/duramax_sleeve_bearing_calm.html 2" x 2 5/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 2" Outside Diameter: 2 5/8" Length" 8" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1290/duramax_sleeve_bearing_call.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1290/duramax_sleeve_bearing_call.html 1 3/4" x 2 5/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 3/4" Outside Diameter: 2 5/8" Length" 7" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1289/duramax_sleeve_bearing_buck.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1289/duramax_sleeve_bearing_buck.html 1 3/4" x 2 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 3/4" Outside Diameter: 2 3/8" Length" 7" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1288/duramax_sleeve_bearing_brow.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1288/duramax_sleeve_bearing_brow.html 1 3/8" x 2 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 3/8" Outside Diameter: 2 3/8" Length" 5 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1285/duramax_sleeve_bearing_boot.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1285/duramax_sleeve_bearing_boot.html 1 1/2 " x 2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/2" Outside Diameter: 2" Length" 6" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1286/duramax_sleeve_bearing_boss.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1286/duramax_sleeve_bearing_boss.html 1 3/8" x 2 1/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 3/8" Outside Diameter: 2 1/8" Length" 5 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1284/duramax_sleeve_bearing_bond.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1284/duramax_sleeve_bearing_bond.html 1 3/8" x 2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 3/8" Outside Diameter: 2" Length" 5 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1283/duramax_sleeve_bearing_bold.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1283/duramax_sleeve_bearing_bold.html 1 3/8" x 1 7/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 3/8" Outside Diameter: 1 7/8" Length" 5 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1282/duramax_sleeve_bearing_boat.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1282/duramax_sleeve_bearing_boat.html 1 1/4" x 2 1/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/4" Outside Diameter: 2 1/8" Length" 5" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1281/duramax_sleeve_bearing_blow.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1281/duramax_sleeve_bearing_blow.html 1 1/4" x 2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/4" Outside Diameter: 2" Length" 5" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1280/duramax_sleeve_bearing_bite.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1280/duramax_sleeve_bearing_bite.html 1 1/4" x 1 3/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/4" Outside Diameter: 1 3/4" Length" 5" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1279/duramax_sleeve_bearing_bird.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1279/duramax_sleeve_bearing_bird.html 1 1/4" x 1 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/4" Outside Diameter: 1 1/2" Length" 5" Wall Thickness: 1/16" http://www.getaprop.com/content-product_info/product_id-1277/duramax_sleeve_bearing_bind.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1277/duramax_sleeve_bearing_bind.html 1 1/8" x 2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/8" Outside Diameter: 2" Length" 4 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1276/duramax_sleeve_bearing_bill.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1276/duramax_sleeve_bearing_bill.html 1 1/8" x 1 3/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/8" Outside Diameter: 1 3/4" Length" 4 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1275/duramax_sleeve_bearing_bend.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1275/duramax_sleeve_bearing_bend.html 1 1/8" x 1 5/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/8" Outside Diameter: 1 5/8" Length" 4 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1274/duramax_sleeve_bearing_belt.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1274/duramax_sleeve_bearing_belt.html 1 1/8" x 1 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1 1/8" Outside Diameter: 1 1/2" Length" 4 1/2" Wall Thickness: 1/16" http://www.getaprop.com/content-product_info/product_id-1273/duramax_sleeve_bearing_beam.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1273/duramax_sleeve_bearing_beam.html 1" x 2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1" Outside Diameter: 2" Length" 4" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1272/duramax_sleeve_bearing_base.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1272/duramax_sleeve_bearing_base.html 1" x 1 5/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1" Outside Diameter: 1 5/8" Length" 4" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1271/duramax_sleeve_bearing_band.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1271/duramax_sleeve_bearing_band.html 1" x 1 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1" Outside Diameter: 1 1/2" Length" 4" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1270/duramax_sleeve_bearing_bale.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1270/duramax_sleeve_bearing_bale.html 1" x 1 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1" Outside Diameter: 1 3/8 Length" 4" Wall Thickness: 1/16" http://www.getaprop.com/content-product_info/product_id-1269/duramax_sleeve_bearing_bait.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1269/duramax_sleeve_bearing_bait.html 1" x 1 1/4" x 6" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 1" Outside Diameter: 1 1/4" Length" 6" Wall Thickness: 1/16" http://www.getaprop.com/content-product_info/product_id-1268/duramax_sleeve_bearing_bade.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1268/duramax_sleeve_bearing_bade.html 7/8" x 1 1/2" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 7/8" Outside Diameter: 1 1/2" Length" 3 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1266/duramax_sleeve_bearing_atom.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1266/duramax_sleeve_bearing_atom.html 7/8" x 1 3/8" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 7/8" Outside Diameter: 1 3/8" Length" 3 1/2" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1265/duramax_sleeve_bearing_apex.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1265/duramax_sleeve_bearing_apex.html 7/8" x 1 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 7/8" Outside Diameter: 1 1/4" Length" 3 1/2" Wall Thickness: 1/16" http://www.getaprop.com/content-product_info/product_id-1264/duramax_sleeve_bearing_acid.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1264/duramax_sleeve_bearing_acid.html 3/4" x 1 1/4" External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 3/4" Outside Diameter: 1 1/4" Length" 3" Wall Thickness: 1/8" http://www.getaprop.com/content-product_info/product_id-1263/duramax_sleeve_bearing_able.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1263/duramax_sleeve_bearing_able.html