sleeve bearings, bronze sleeve bearings, sleeve bearing, bronze sleeve bearing, cutlass bearing, cutlass bearings, cutless bearings, duramax bearings, duramax bearing, duramax marine http://www.getaprop.com/content-categories/cat-385_451/brass_sleeve_metric.html Sat, 26 May 2012 14:09:38 -0500 en 145mm X 180mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 145mm Outside Diameter: 180mm Length:560mm Wall Thickness:7.45mm http://www.getaprop.com/content-product_info/product_id-1346/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1346/duramax_sleeve_bearing.html 130mm X 170mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 130mm Outside Diameter: 170mm Length:520mm Wall Thickness:5.63mm http://www.getaprop.com/content-product_info/product_id-1345/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1345/duramax_sleeve_bearing.html 120mm X 155mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 120mm Outside Diameter: 155mm Length:480mm Wall Thickness:6.06mm http://www.getaprop.com/content-product_info/product_id-1344/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1344/duramax_sleeve_bearing.html 115mm X 145mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 115mm Outside Diameter: 145mm Length:460mm Wall Thickness:4.25mm http://www.getaprop.com/content-product_info/product_id-1343/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1343/duramax_sleeve_bearing.html 110mm X 135mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 110mm Outside Diameter: 135mm Length:440mm Wall Thickness:4.51mm http://www.getaprop.com/content-product_info/product_id-1342/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1342/duramax_sleeve_bearing.html 105mm X 130mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 105mm Outside Diameter: 130mm Length:420mm Wall Thickness:4.52mm http://www.getaprop.com/content-product_info/product_id-1341/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1341/duramax_sleeve_bearing.html 100mm X 125mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 100mm Outside Diameter: 125mm Length:400mm Wall Thickness:3.77mm http://www.getaprop.com/content-product_info/product_id-1340/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1340/duramax_sleeve_bearing.html 95mm X 115mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 95mm Outside Diameter: 115mm Length: 380mm Wall Thickness:4.51mm http://www.getaprop.com/content-product_info/product_id-1339/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1339/duramax_sleeve_bearing.html 90mm X 110mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 90mm Outside Diameter: 110mm Length: 360mm Wall Thickness:4.17mm http://www.getaprop.com/content-product_info/product_id-1338/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1338/duramax_sleeve_bearing.html 85mm X 105mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 85mm Outside Diameter: 105mm Length: 340mm Wall Thickness:3.19mm http://www.getaprop.com/content-product_info/product_id-1337/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1337/duramax_sleeve_bearing.html 80mm X 100mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 80mm Outside Diameter: 100mm Length: 320mm Wall Thickness:3.17mm http://www.getaprop.com/content-product_info/product_id-1336/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1336/duramax_sleeve_bearing.html 75mm X 95mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 75mm Outside Diameter: 95mm Length: 300mm Wall Thickness:3.05mm http://www.getaprop.com/content-product_info/product_id-1335/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1335/duramax_sleeve_bearing.html 70mm X 90mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 70mm Outside Diameter: 90mm Length: 280mm Wall Thickness:4.76mm http://www.getaprop.com/content-product_info/product_id-1334/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1334/duramax_sleeve_bearing.html 60mm X 80mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 60mm Outside Diameter: 80mm Length: 240mm Wall Thickness:3.26mm http://www.getaprop.com/content-product_info/product_id-1332/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1332/duramax_sleeve_bearing.html 55mm X 75mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 55mm Outside Diameter: 75mm Length: 220mm Wall Thickness:2.58mm http://www.getaprop.com/content-product_info/product_id-1331/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1331/duramax_sleeve_bearing.html 50mm X 70mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 50mm Outside Diameter: 70mm Length: 200mm Wall Thickness:3.26mm http://www.getaprop.com/content-product_info/product_id-1330/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1330/duramax_sleeve_bearing.html 45mm X 65mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 45mm Outside Diameter: 65mm Length: 180mm Wall Thickness:3.3mm http://www.getaprop.com/content-product_info/product_id-1329/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1329/duramax_sleeve_bearing.html 40mm X 55mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 40mm Outside Diameter: 55mm Length: 160mm Wall Thickness:3.07mm http://www.getaprop.com/content-product_info/product_id-1328/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1328/duramax_sleeve_bearing.html 38mm X 55mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 38mm Outside Diameter: 55mm Length: 152mm Wall Thickness:3.07mm http://www.getaprop.com/content-product_info/product_id-1327/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1327/duramax_sleeve_bearing.html 35mm X 50mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 35mm Outside Diameter: 50mm Length: 140mm Wall Thickness:3.07mm http://www.getaprop.com/content-product_info/product_id-1326/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1326/duramax_sleeve_bearing.html 32mm X 45mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 32mm Outside Diameter: 45mm Length: 128mm Wall Thickness:3.07mm http://www.getaprop.com/content-product_info/product_id-1325/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1325/duramax_sleeve_bearing.html 30mm X 45mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 30mm Outside Diameter: 45mm Length: 120mm Wall Thickness:3.07mm http://www.getaprop.com/content-product_info/product_id-1324/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1324/duramax_sleeve_bearing.html 28mm X 42mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 28mm Outside Diameter: 42mm Length: 112mm Wall Thickness:2.35mm http://www.getaprop.com/content-product_info/product_id-1322/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1322/duramax_sleeve_bearing.html 25mm X 40mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 25mm Outside Diameter: 40mm Length: 100mm Wall Thickness:2.54mm http://www.getaprop.com/content-product_info/product_id-1321/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1321/duramax_sleeve_bearing.html 65mm X 85mm External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Shaft Diameter: 65mm Outside Diameter: 85mm Length: 260mm Wall Thickness:2.82mm http://www.getaprop.com/content-product_info/product_id-1333/duramax_sleeve_bearing.html http://www.getaprop.com/images/products/bearing1[1].gif http://www.getaprop.com/content-product_info/product_id-1333/duramax_sleeve_bearing.html