prop pullers, prop puller, propeller puller, ski boat prop puller, ski boat propeller pullers, propeller pullers, propeller removal tools, prop replacment, wheel puller, pro pull, chain puller http://www.getaprop.com/content-categories/cat-374_441/inboard_propeller_pullers.html Sat, 26 May 2012 14:08:23 -0500 en A great time-saver. Protects the propeller, the shaft, and the bearings. Pulls 2, 3, and 4-blade wheels (24"- 80") quickly, without disturbing close coupled rudders. Requires only minimum clearance between the hub and strut or stern bearings. http://www.getaprop.com/content-product_info/product_id-1230/algonac_propeller_puller_b.html http://www.getaprop.com/images/products/photo_puller_2[1].gif http://www.getaprop.com/content-product_info/product_id-1230/algonac_propeller_puller_b.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propellerCapacity: 2, 3, 4 and 5 blades, up to 40" propeller and 3" shaft http://www.getaprop.com/content-product_info/product_id-1234/walter_propeller_puller_3n.html http://www.getaprop.com/images/products/Pp2n[1].jpg http://www.getaprop.com/content-product_info/product_id-1234/walter_propeller_puller_3n.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.Capacity: 2, 3, 4 and 5 blades, up to 28" propeller and 2" shaft http://www.getaprop.com/content-product_info/product_id-1233/walter_propeller_puller_2n.html http://www.getaprop.com/images/products/Pp2n[1].jpg http://www.getaprop.com/content-product_info/product_id-1233/walter_propeller_puller_2n.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.Capacity: 3 blades only, up to 20" propeller and 1-1/2" shaft http://www.getaprop.com/content-product_info/product_id-1231/walter_propeller_puller_1.html http://www.getaprop.com/images/products/Pp1[1].jpg http://www.getaprop.com/content-product_info/product_id-1231/walter_propeller_puller_1.html A great time-saver. Protects the propeller, the shaft, and the bearings. Pulls 2, 3, and 4-blade props (10" to 24") quickly, without disturbing close coupled rudders. Requires only minimum clearance between the hub and strut or stern bearings. http://www.getaprop.com/content-product_info/product_id-1229/algonac_propeller_puller_a.html http://www.getaprop.com/images/products/photo_puller_2[1].gif http://www.getaprop.com/content-product_info/product_id-1229/algonac_propeller_puller_a.html 2" Max. Shaft Diameter Brute Propeller Puller W/ Pointed Bolt... Getaprop Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. http://www.getaprop.com/content-product_info/product_id-1238/pro_pull_119.html http://www.getaprop.com/images/products/ppf119_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1238/pro_pull_119.html 1 1/2" Max. Shaft Diameter Brute Propeller Puller W/ Pointed Bolt... GetaProp Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. http://www.getaprop.com/content-product_info/product_id-1237/pro_pull_118.html http://www.getaprop.com/images/products/ppf118_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1237/pro_pull_118.html 3" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1242/pro_pull_116.html http://www.getaprop.com/images/products/ppf116_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1242/pro_pull_116.html (3/4 - 2) Shaft diameter Versatile propeller puller... GetaProp Versatile propeller puller is designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. Its made of high strength heat-treated alloy steel and finished with cadmium for protection. The threaded rods, pivot pins and handle are manufactured using the finest stressproof steels available. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it cant slip off while in use. The offset design of the pivot pins keep the hook of the tool on the propeller hub and pulls through the center of the propeller shaft. Minimal clearance between the propeller hub and strut are required due to the unique puller design. This propeller puller requires no addional tools for operation. http://www.getaprop.com/content-product_info/product_id-1244/pro_pull_113.html http://www.getaprop.com/images/products/ppf113_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1244/pro_pull_113.html 1 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1239/pro_pull_103.html http://www.getaprop.com/images/products/ppf103_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1239/pro_pull_103.html 2 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1241/pro_pull_104.html http://www.getaprop.com/images/products/ppf104_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1241/pro_pull_104.html 1 1/4" - 2 1/2" 10 Ton Chain Propeller Puller... GetaProp 10 Ton Chain propeller puller is designed to remove 2, 3, 4, 5 and 6 blade propellers on inboard shafts ranging from 1 1/4 - 2 1/2. Its made of high strength heat-treated allow steel and finished with cadmium for protection. The chains are grade 70 transport rated and are plated with cadmium. All bolts, nuts and threaded parts are either grade 5 or heat-treated allow steel finished with cadmium. Four propeller shaft adapters are used to set puller up for a specific shaft size and/or if propeller blades extend forward of the propeller hub. Four hooks with safety rings are used on propellers that have no clearance between the propeller hub and the strut. The chains conform to propeller blades that overlap to accomodate easy propeller removal without damage to the blades. Complete with zinc plated case hardened box wrench to operate puller a container of waterproof grease, waterproof tool box and instructions with diagrams for use. http://www.getaprop.com/content-product_info/product_id-1243/pro_pull_106.html http://www.getaprop.com/images/products/ppf106_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1243/pro_pull_106.html 2" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1240/pro_pull_107.html http://www.getaprop.com/images/products/ppf107_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1240/pro_pull_107.html