Get a Prop sells boat propellers, boat motor props, inboard motor, outboard motor and performance boat propellers. Free gift with purchases over $100. http://www.getaprop.com/ Sat, 19 May 2012 11:59:45 -0500 en 20" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7768/autostream_self_feathering_propeller_20.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7768/autostream_self_feathering_propeller_20.html 19" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7767/autostream_self_feathering_propeller_19.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7767/autostream_self_feathering_propeller_19.html 18" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7766/autostream_self_feathering_propeller_18.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7766/autostream_self_feathering_propeller_18.html 17" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7765/autostream_self_feathering_propeller_17.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7765/autostream_self_feathering_propeller_17.html 16" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7764/autostream_self_feathering_propeller_16.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7764/autostream_self_feathering_propeller_16.html 15" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7763/autostream_self_feathering_propeller_15.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7763/autostream_self_feathering_propeller_15.html 20" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7776/slipstream_folding_propeller_20_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7776/slipstream_folding_propeller_20_3b.html 19" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7775/slipstream_folding_propeller_19_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7775/slipstream_folding_propeller_19_3b.html 18" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7774/slipstream_folding_propeller_18_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7774/slipstream_folding_propeller_18_3b.html 17" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7773/slipstream_folding_propeller_17_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7773/slipstream_folding_propeller_17_3b.html 16" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7772/slipstream_folding_propeller_16_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7772/slipstream_folding_propeller_16_3b.html 15" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7771/slipstream_folding_propeller_15_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7771/slipstream_folding_propeller_15_3b.html 14" Slipstream 3 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7769/slipstream_folding_propeller_14_3b.html http://www.getaprop.com/images/products/fold3.jpg http://www.getaprop.com/content-product_info/product_id-7769/slipstream_folding_propeller_14_3b.html 20" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7783/slipstream_folding_propeller_20_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7783/slipstream_folding_propeller_20_2b.html 19" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7782/slipstream_folding_propeller_19_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7782/slipstream_folding_propeller_19_2b.html 18" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7781/slipstream_folding_propeller_18_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7781/slipstream_folding_propeller_18_2b.html 17" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7780/slipstream_folding_propeller_17_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7780/slipstream_folding_propeller_17_2b.html 16" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7779/slipstream_folding_propeller_16_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7779/slipstream_folding_propeller_16_2b.html 15" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7778/slipstream_folding_propeller_15_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7778/slipstream_folding_propeller_15_2b.html 14" Slipstream 2 Blade Folding Stainless Steel Propeller fits Saildrives & shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +Geared design keeps blades synchronized, allowing the blades to fold back properly regardless of the propeller position, even at low speeds - No crawling into the bilge to position the shaft when racing +Sizes from 14" to 20" diameter (down to 12" as custom) +All Stainless Steel construction for superior life using low carbon 316L grade stainless steel. Being a similar metal as most prop shafts it is less likely to promote electrolysis which is the most common cause of prop failure. +Large Blade area for excellent thrust, with unique blade geometry resulting in a smoother and more reliable opening of the blades, particularly when shifting into reverse, whilst travelling forward. +Ultra High Molecular Weight Polyethylene thrust plates* on either side of the blades prevent metal-to-metal wear of blade on body. +Blades pivot on replaceable Nibral bushes*, these can be easily pressed out and replaced, compared to the traditional over sizing or welding/redrilling +Easily replaced Polyurethane Bump-Stop Pads* reduce the clunk of the blades hitting the stop faces when shifting into forward, plus eliminates the wear on the back of the blades and the body +Blade pivot pins* are double screwed* at BOTH ends for increased security of blades +All wear components are user-serviceable, "self-service" kits are available for when the time comes to refurbish the propeller (items with * are included in the kit) http://www.getaprop.com/content-product_info/product_id-7777/slipstream_folding_propeller_14_2b.html http://www.getaprop.com/images/products/info_Slipstream[1].jpg http://www.getaprop.com/content-product_info/product_id-7777/slipstream_folding_propeller_14_2b.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 30-70HP Yamaha Outboards... Thru Hub Exhaust 13 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9435/michigan_ballistic_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9435/michigan_ballistic_propeller_yamaha.html Michigan Ballistic Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Rubber Hub Bushing Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9433/michigan_ballistic_propeller_suzuki.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9433/michigan_ballistic_propeller_suzuki.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 50-70HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 13 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9431/michigan_ballistic_propeller_tohatsu.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9431/michigan_ballistic_propeller_tohatsu.html Michigan Ballistic Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.50" Gearcase OEM Rubber Hub Bushing High Polish Finish Model 402-500-700 1977-84 25HP Bigfoot (4-stroke) 1999 - 2005 30HP Bigfoot (4-stroke) 2010 & Newer 30HP 2 & 4 Stroke 1994 & Newer 30HP Sea Pro-Marathon 1994 & Newer 35HP 1984-89 40HP 2 & 4 Stroke (Not Bigfoot) 1977 & Newer 40HP Sea Pro-Marathon 1977 & Newer 45HP 1986-89 48HP Mariner All Years 50HP 2 & 4-Stroke (Not Bigfoot) 1977 & Newer 55HP Mercury Sea Pro-Marathon 1995 & Newer 60HP Not Bigfoot or Sea Pro 1978 & Newer 70HP thru 1983 Bigfoot 40-60 hp Uses 40-140 Section High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Rubber Hub Bushing Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9429/michigan_ballistic_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9429/michigan_ballistic_propeller_mercury.html Michigan Ballistic Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Rubber Hub Bushing Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9427/michigan_ballistic_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9427/michigan_ballistic_propeller_honda.html Michigan Ballistic Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... 3.25" Gearcase Thru Hub Exhaust 13 Tooth Spline 2-Strokes E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 4-Strokes E/J-Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Rubber Hub Bushing Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8992/michigan_ballistic_stainless_propeller_ej.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-8992/michigan_ballistic_stainless_propeller_ej.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 20-30HP Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9434/michigan_ballistic_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9434/michigan_ballistic_propeller_yamaha.html Solas New Saturn Stainless Propeller Fits 25-30 HP Suzuki Outboards... DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 Rubber Hub Bushing Included The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7459/solas_new_saturn_3_propeller_suzuki.html http://www.getaprop.com/images/products/newsatrw.JPG http://www.getaprop.com/content-product_info/product_id-7459/solas_new_saturn_3_propeller_suzuki.html Solas Amita-4 Aluminum Propeller Fits 25-30 HP Suzuki Outboards... DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 Rubber Hub Bushing Included The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7458/solas_amita_4_propeller_suzuki.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7458/solas_amita_4_propeller_suzuki.html Solas Amita-3 Aluminum Propeller Fits 25-30 HP Suzuki Outboards... DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 Rubber Hub Bushing Included SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7457/solas_amita_3_propeller_suzuki.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7457/solas_amita_3_propeller_suzuki.html Quicksilver Black Diamond Aluminum Propeller fits 25-30 HP Suzuki Outboards... DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-7453/quicksilver_black_diamond_propeller_suzuki.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-7453/quicksilver_black_diamond_propeller_suzuki.html SLR3-10.25" Diameter, Power Tech XTreme Value Series Stainless Propeller fits 25-30 HP Suzuki Outboards... 3.00" Gearcase 10 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 10.25 diameter, this Suzuki Outboard Propeller is available in 12, 13 and 14 pitch. This 3-blade design has a right-hand rotation, low rake OEM equivalent, and is cupped. This is a direct OEM replacement for the Suzuki 20-30 horsepower propeller. As a low-rake style, no trim tab adjustment is required. http://www.getaprop.com/content-product_info/product_id-9132/powertech_slr3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSLR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9132/powertech_slr3_propeller_suzuki.html SCB3-10.375" Diameter, Powertech All Purpose Series Stainless Propeller fits 25-30 HP Suzuki Outboards... 3.00" Gearcase 10 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 SCB3 - Powertech props 10.375 diameter, this Suzuki Outboard Propeller is available in 10 and 17 pitch. This 3-blade right-hand rotation is the best all-purpose, also good for Yamaha and Honda 25-horsepower family. http://www.getaprop.com/content-product_info/product_id-7456/powertech_scb3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-7456/powertech_scb3_propeller_suzuki.html REB3-10.25" Diameter, Powertech Black Max Series Stainless Propeller fits 25-30 HP Suzuki Outboards... 3.00" Gearcase 10 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 REB3 Powertech props All Purpose Suzuki Outboard Propeller: 10.25 diameter, the REB3 is available in pitches from 10 to 17 in 1 increments. 3-blade design with right-hand rotation, this Powertech propeller is the factory equivalent to the Mercury BlackMax. Cupped with a 15&#8304; aft rake, an excellent all-purpose prop for Evinrude Johnson motors, and the Suzuki 20-35 horsepower family. http://www.getaprop.com/content-product_info/product_id-9131/powertech_reb3_propeller_suzuki.html http://www.getaprop.com/images/products/gpreb3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9131/powertech_reb3_propeller_suzuki.html 10.25 RH 11 Power Tech-3 Aluminum Propeller Fits 25 & 30hp Suzuki Outboards... Rubber Hub Bushing Included DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 http://www.getaprop.com/content-product_info/product_id-8833/power_tech_propeller_suzuki.html http://www.getaprop.com/images/products/PT-BS.jpg http://www.getaprop.com/content-product_info/product_id-8833/power_tech_propeller_suzuki.html Michigan Vortex Aluminum Propeller fits 25-30 HP Suzuki Outboards... Requires XHS Hub Kit # 121 (Not Included) DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 http://www.getaprop.com/content-product_info/product_id-7452/michigan_vortex_propeller_suzuki.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-7452/michigan_vortex_propeller_suzuki.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 25-30HP Suzuki Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish DT 20 1985-1988 DF 25 4-Stroke 2000-2006 DT 25 1985-1988 DF 25 V-Twin 2006 & Newer DT 25C 1989-2000 DT 30C 1987-1997 DF 30 4-Stroke 2000-2007 DT 30 1983-1997 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9432/michigan_ballistic_propeller_suzuki.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9432/michigan_ballistic_propeller_suzuki.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 25-30HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9430/michigan_ballistic_propeller_tohatsu.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9430/michigan_ballistic_propeller_tohatsu.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 9.9-30HP Mercury Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase Polished Finish OEM Rubber Hub Bushing Mercury 10-Spline: 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9428/michigan_ballistic_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9428/michigan_ballistic_propeller_mercury.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 25-30HP Honda Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase Polished Finish OEM Rubber Hub Bushing BF-25 HP All Years BF-30 HP All Years High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9426/michigan_ballistic_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9426/michigan_ballistic_propeller_honda.html Michigan Ballistic 4 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9419/michigan_ballistic_4_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC4-1.JPG http://www.getaprop.com/content-product_info/product_id-9419/michigan_ballistic_4_propeller_yamaha.html Michigan Ballistic 4 Blade Stainless Propeller fits 135-300 HP Mercury Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9422/michigan_ballistic_4_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC4-1.JPG http://www.getaprop.com/content-product_info/product_id-9422/michigan_ballistic_4_propeller_mercury.html Michigan Ballistic 4 Blade Stainless Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9425/michigan_ballistic_4_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC4-1.JPG http://www.getaprop.com/content-product_info/product_id-9425/michigan_ballistic_4_propeller_honda.html Michigan Ballistic 4 Blade Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009-Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8997/michigan_ballistic_4_propeller_e_j.html http://www.getaprop.com/images/products/BALLISTIC4-1.JPG http://www.getaprop.com/content-product_info/product_id-8997/michigan_ballistic_4_propeller_e_j.html Michigan Ballistic XL 3 Blade Stainless Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9424/michigan_ballistic_xl_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-9424/michigan_ballistic_xl_propeller_honda.html Michigan Ballistic-3 Blade Stainless Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9423/michigan_ballistic_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9423/michigan_ballistic_propeller_honda.html Michigan Ballistic XL 3 Blade Stainless Propeller fits 135-300 HP Mercury Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9421/michigan_ballistic_xl_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-9421/michigan_ballistic_xl_propeller_mercury.html Michigan Ballistic-3 Blade Stainless Propeller fits 135-300 HP Mercury Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9420/michigan_ballistic_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9420/michigan_ballistic_propeller_mercury.html Michigan Ballistic XL 3 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9418/michigan_ballistic_xl_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-9418/michigan_ballistic_xl_propeller_yamaha.html Michigan Ballistic-3 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9417/michigan_ballistic_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9417/michigan_ballistic_propeller_yamaha.html Solas New Saturn-3 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7518/solas_new_saturn_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7518/solas_new_saturn_3_rubex_propeller_yamaha.html Solas Lexor-4 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Lexor-4 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The Lexor-4 series Propeller is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7515/solas_lexor_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7515/solas_lexor_4_rubex_propeller_yamaha.html "New" Solas Lexor-3 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7517/solas_lexor_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7517/solas_lexor_3_rubex_propeller_yamaha.html Solas Lexor-3 Plus Stainless Propeller Fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Lexor-3 Plus propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7519/solas_lexor_3_plus_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7519/solas_lexor_3_plus_rubex_propeller_yamaha.html Solas HR Titan-4 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7516/solas_hr_titan_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7516/solas_hr_titan_4_rubex_propeller_yamaha.html Quicksilver Typhoon Stainless Propeller fits 150-300 HP Yamaha Outboards... Similar to Mercury Revolution-4 Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer http://www.getaprop.com/content-product_info/product_id-6108/quicksilver_typhoon_propeller_yamaha.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-6108/quicksilver_typhoon_propeller_yamaha.html Quicksilver Thunderbolt Stainless Propeller fits 150-300 HP Yamaha Outboards... Similar to Mercury Mirage Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer http://www.getaprop.com/content-product_info/product_id-6102/quicksilver_thunderbolt_propeller_yamaha.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-6102/quicksilver_thunderbolt_propeller_yamaha.html Quicksilver Silverado Stainless Propeller fits 150-300 HP Yamaha Outboards... Similar to Mercury Vengeance Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer http://www.getaprop.com/content-product_info/product_id-6075/quicksilver_silverado_propeller_yamaha.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-6075/quicksilver_silverado_propeller_yamaha.html Quicksilver QST-5 Outboard Propeller fits 150-300 HP Yamaha Outboards... Similar to Mercury High Five Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-9384/quicksilver_qst_5_propeller_yamaha.html http://www.getaprop.com/images/products/QS51.JPG http://www.getaprop.com/content-product_info/product_id-9384/quicksilver_qst_5_propeller_yamaha.html Quicksilver Lightspeed Stainless Propeller fits 150-300 HP Yamaha Outboards... Similar to Mercury Laser II Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer http://www.getaprop.com/content-product_info/product_id-6085/quicksilver_lightspeed_propeller_yamaha.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-6085/quicksilver_lightspeed_propeller_yamaha.html Mercury Vengeance Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-9383/mercury_vengeance_propeller_yamaha.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-9383/mercury_vengeance_propeller_yamaha.html Mercury Revolution 4 Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-9382/mercury_revolution_4_propeller_yamaha.html http://www.getaprop.com/images/products/mer333.JPG http://www.getaprop.com/content-product_info/product_id-9382/mercury_revolution_4_propeller_yamaha.html Mercury Mirage Plus Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Three-blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For outboards 150 hp and up, especially for offshore fishing, bay and sport boats http://www.getaprop.com/content-product_info/product_id-9381/mercury_mirage_plus_propeller_yamaha.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-9381/mercury_mirage_plus_propeller_yamaha.html Mercury High Five Outboard Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-9380/mercury_high_five_propeller_yamaha.html http://www.getaprop.com/images/products/hi555.JPG http://www.getaprop.com/content-product_info/product_id-9380/mercury_high_five_propeller_yamaha.html Mercury Enertia Stainless Steel Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer Three-Blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For outboards 150 hp and up, especially for offshore fishing, bay, and sport boats http://www.getaprop.com/content-product_info/product_id-9379/mercury_enertia_propeller_yamaha.html http://www.getaprop.com/images/products/ENERTIA.JPG http://www.getaprop.com/content-product_info/product_id-9379/mercury_enertia_propeller_yamaha.html Michigan Apollo-4 Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5688/michigan_apollo_4_propeller_yamaha.html http://www.getaprop.com/images/products/ap4.jpg http://www.getaprop.com/content-product_info/product_id-5688/michigan_apollo_4_propeller_yamaha.html Michigan Large Diameter Apollo-3 XL Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7743/michigan_apollo_3_xl_propeller_yamaha.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7743/michigan_apollo_3_xl_propeller_yamaha.html Michigan Apollo-3 Stainless Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Requires XHS Hub Kit # 203 (Not Included) 150 HP 1986 & Newer F150 4-Stroke 2004 & Newer 175 HP 1984 & Newer 200 HP 1984 & Newer 200 HP VMAX 2001 F200 4-Stroke 2002 & Newer 220 HP (Special) 1984-1985 VF225 V MAX SHO 2010 & Newer F225 Offshore 2010 & Newer F225 4-Stroke 2002 & Newer 225 HP (Excel) 1987-1988 225 HP 1986 & Newer 250 HP 1990 & Newer 250 HP VMAX 2001 F250 4-Stroke 2002 & Newer VF250 V MAX SHO 2010 & Newer F250 Offshore 2010 & Newer 300 HP 2004-2007 F300 Offshore 2010 & Newer VF200 V MAX SHO2010 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5672/michigan_apollo_3_propeller_yamaha.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5672/michigan_apollo_3_propeller_yamaha.html Michigan Apollo Stainless Propeller fits 50-130 HP Yamaha Outboards... D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust XHS108 Hub Kit T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer XHS103 Hub Kit 115 HP 1984 and Newer 130 HP 1984 and Newer F115 (Four Stroke) 1999 and Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5654/michigan_apollo_3_propeller_yamaha.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5654/michigan_apollo_3_propeller_yamaha.html Michigan Ballistic-3 XL Stainless Propeller fits 50-130 HP Yamaha Outboards... Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub High Polish Finish T50 HP 1996 & Newer 60 HP (Includes C60/E60/P60) 1992-2005 F70 4-Stroke 2010 & Newer 70 HP 1984 & Newer 75 HP (Includes C75/E75/P75) 1994-1999 F75 4-Stroke 2003 & Newer 80 HP 1997 F80 4-Stroke 1999-2002 85 HP 1991-1997 90 HP (Includes C90) 1984 & Newer F90 4-Stroke 1999 & Newer F100 4-Stroke 1999-2002 F115 4-Stroke 2000 & Newer 115 HP (Includes C115/P115) 1984 & Newer 130 HP 1984-2003 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9416/michigan_ballistic_xl_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-9416/michigan_ballistic_xl_propeller_yamaha.html Michigan Ballistic-3 Stainless Propeller fits 50-130 HP Yamaha Outboards... Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub High Polish Finish T50 HP 1996 & Newer 60 HP (Includes C60/E60/P60) 1992-2005 F70 4-Stroke 2010 & Newer 70 HP 1984 & Newer 75 HP (Includes C75/E75/P75) 1994-1999 F75 4-Stroke 2003 & Newer 80 HP 1997 F80 4-Stroke 1999-2002 85 HP 1991-1997 90 HP (Includes C90) 1984 & Newer F90 4-Stroke 1999 & Newer F100 4-Stroke 1999-2002 F115 4-Stroke 2000 & Newer 115 HP (Includes C115/P115) 1984 & Newer 130 HP 1984-2003 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9415/michigan_ballistic_propeller_yamaha.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9415/michigan_ballistic_propeller_yamaha.html Solas New Saturn-3 Rubex Propeller Fits 60-140 HP Suzuki Outboards... Interchangeable Hub System XHS110 Hub Kit (13-Spline) DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit (15-Spline) DF-90 2001 and Newer DF-100 2009 and Newer DF-115 2001 and Newer XHS126 Hub Kit (15-Spline) DF-140 2002 and Newer XHS227 Hub Kit (15-Spline) DF-70A/80A/90A When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7477/solas_new_saturn_3_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7477/solas_new_saturn_3_rubex_propeller_suzuki.html Solas HR Titan-4 Rubex Propeller Fits 60-140 HP Suzuki Outboards... Interchangeable Hub System XHS110 Hub Kit (13-Spline) DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit (15-Spline) DF-90 2001 and Newer DF-100 2009 and Newer DF-115 2001 and Newer XHS126 Hub Kit (15-Spline) DF-140 2002 and Newer XHS227 Hub Kit (15-Spline) DF-70A/80A/90A In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7476/solas_hr_titan_4_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7476/solas_hr_titan_4_rubex_propeller_suzuki.html Quicksilver Silverado Stainless Propeller fits 60-140 HP Suzuki Outboards... XHS110 Hub Kit (13-Spline) DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit (15-Spline) DF-90 2001 and Newer DF-100 2009 and Newer DF-115 2001 and Newer XHS126 Hub Kit (15-Spline) DF-140 2002 and Newer XHS227 Hub Kit (15-Spline) DF-70A/80A/90A http://www.getaprop.com/content-product_info/product_id-5899/quicksilver_silverado_propeller_suzuki.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5899/quicksilver_silverado_propeller_suzuki.html Quicksilver Lightspeed Stainless Propeller fits 60-140 HP Suzuki Outboards... XHS110 Hub Kit (13-Spline) DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit (15-Spline) DF-90 2001 and Newer DF-100 2009 and Newer DF-115 2001 and Newer XHS126 Hub Kit (15-Spline) DF-140 2002 and Newer XHS227 Hub Kit (15-Spline) DF-70A/80A/90A http://www.getaprop.com/content-product_info/product_id-5904/quicksilver_lightspeed_propeller_suzuki.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-5904/quicksilver_lightspeed_propeller_suzuki.html Michigan Apollo-3 Stainless Propeller fits 60-140 HP Suzuki Outboards... XHS110 Hub Kit (13-Spline) DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit (15-Spline) DF-90 2001 and Newer DF-100 2009 and Newer DF-115 2001 and Newer XHS126 Hub Kit (15-Spline) DF-140 2002 and Newer XHS227 Hub Kit (15-Spline) DF-70A/80A/90A High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5431/michigan_apollo_3_propeller_suzuki.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5431/michigan_apollo_3_propeller_suzuki.html Solas Titan-3 Stainless Propeller fits 90-140 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Thru Hub Exhaust 15 Tooth Spline 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7394/solas_titan_3_propeller_tohatsu.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7394/solas_titan_3_propeller_tohatsu.html Solas New Saturn-3 Rubex Stainless Propeller fits 90-140 HP Nissan Tohatsu Outboards... Interchangable Hub System Requires XHS Hub Kit #109 Thru Hub Exhaust 15 Tooth Spline 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7392/solas_new_saturn_rubex_propeller_tohatsu.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7392/solas_new_saturn_rubex_propeller_tohatsu.html Solas HR Titan-4 Stainless Propeller fits 90-140 HP Nissan Tohatsu Outboards... Interchangable Hub System Requires XHS Hub Kit #109 Thru Hub Exhaust 15 Tooth Spline 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7391/solas_hr_titan_4_rubex_propeller_tohatsu.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7391/solas_hr_titan_4_rubex_propeller_tohatsu.html Quicksilver Silverado Stainless Propeller fits 60-140 HP Nissan Tohatsu Outboards... Requires XHS109 Hub Kit Thru Hub Exhaust & 15 Tooth Spline 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-7387/quicksilver_silverado_propeller_tohatsu.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7387/quicksilver_silverado_propeller_tohatsu.html Quicksilver Lightspeed Stainless Propeller fits 60-140 HP Nissan Tohatsu Outboards... Requires XHS Kit #109 Thru Hub Exhaust & 15 Tooth Spline 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-7388/quicksilver_lightspeed_propeller_tohatsu.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-7388/quicksilver_lightspeed_propeller_tohatsu.html Powertech ELD3 X/Series Propellers fits Nissan Tohatsu 60-140hp Outboards... Equivalent to Michigan Apollo Thru Hub Exhaust 15 Tooth Spline Optional XHS Hub Kit #109 Standard Finish Is Polish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-8772/powertech_eld3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPELD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8772/powertech_eld3_propeller_tohatsu.html Michigan Apollo-3 Stainless Propeller fits 60-140 HP Nissan Tohatsu Outboards... Requires XHS Hub Kit #109 (Not Included) Thru Hub Exhaust 15 Tooth Spline 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7385/michigan_apollo_3_propeller_tohatsu.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7385/michigan_apollo_3_propeller_tohatsu.html Michigan Ballistic-3 Stainless Propeller fits 60-140 HP Nissan-Tohatsu Outboards... 4.25" Gearcase Thru Hub Exhaust 15 Tooth Spline Included Rubber OEM Hub High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9414/michigan_ballistic_propeller_tohatsu.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9414/michigan_ballistic_propeller_tohatsu.html Powertech 14.00" Dimeter WBH3 Thruster Series Load Pushing Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech WBH3 Tohatsu Outboard Thruster Series Powertech Propeller is a 14 diameter propeller available in 1 increments from 7 to 14. Right-hand rotation, this wide-blade, load pushing Powertech prop is the choice for pontoons and workboats. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9260/powertech_wbh3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPWBH3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9260/powertech_wbh3_propeller_tohatsu.html Powertech 13.50" Diameter SWW4-Blade Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech SWW4 Tohatsu Outboard Super Grip Powertech propeller: 13.5 diameter, available in 1 pitch increments from 12 to 17 4-blade version of the SWW3, this Powertech prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9259/powertech_sww4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSWW41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9259/powertech_sww4_propeller_tohatsu.html Powertech 13.50" Diameter SWW3-Blade Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech SWW3 Tohatsu Outboard Super Grip propeller is 13.50 diameter and available in 1 pitch increments from 12 to 17. Right hand rotation, this prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9258/powertech_sww3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSWW31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9258/powertech_sww3_propeller_tohatsu.html Powertech 13.00" Diameter SCD4 Semi-Cleaver Sternlifter Stainless Propeller fits 60-140 HP Tohatsu Outboards... SCD4 Tohatsu Outboard Semi Cleaver 4-blade Powertech propeller is 13 diameter available in 1 pitch increments from 13 to 21. 4-blade with left or right-hand rotation gives the Semi-Cleaver excellent sternlift and grip. Great porpoise control for transom-mounted bottoms or shallow Vs. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9257/powertech_scd4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSCD41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9257/powertech_scd4_propeller_tohatsu.html Powertech 13.00" Diameter SCD3 Semi-Cleaver Sternlifter Stainless Propeller fits 60-140 HP Tohatsu Outboards... SCD3 Tohatsu Outboard Semi Cleaver 3-blade Powertech propeller is 13 diameter available in 1 pitch increments from 13 to 21. 3-blade with left or right-hand rotation gives the Semi-Cleaver excellent sternlift and grip. Great porpoise control for transom-mounted bottoms or shallow Vs. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9256/powertech_scd3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSCD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9256/powertech_scd3_propeller_tohatsu.html Powertech 13.25" Diameter RXB4-Accelerator Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech RXB4 Tohatsu Outboard Accelerator Powertech Propeller is a 13.25 diameter Prop available in 1 pitch increments from 12 to 21. 4-blade design, right or left-hand rotation with a moderate rake and cup, the Accelerator series Powertech Prop focuses on holeshot and handling performance, an excellent all-around 4-blade prop. Holeshot/Handling Propellers (Reduce 1-2" Pitch) 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9255/powertech_rxb4_propeller_tohatsu.html http://www.getaprop.com/images/products/gprxb412 copy.jpg http://www.getaprop.com/content-product_info/product_id-9255/powertech_rxb4_propeller_tohatsu.html Powertech 13.25" Diameter RED4 Value Line All Purpose Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech RED4 All Purpose Tohatsu Outboard Powertech Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 4-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9254/powertech_red4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPRED41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9254/powertech_red4_propeller_tohatsu.html Powertech 13.25" Diameter RED3 Value Line All Purpose Stainless Propeller fits 60-140 HP Tohatsu Outboards... RED3 All Purpose Tohatsu Outboard Powertech Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 3-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9253/powertech_red3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPRED31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9253/powertech_red3_propeller_tohatsu.html Powertech RAF3 R/Series Stainless Propeller fits Nissan Tohatsu 60-140hp Outboards... Equivalent to Rapture, Ballistic & Stilletto Thru Hub Exhaust 15 Tooth Spline Optional XHS Hub Kit #109 Standard Finish Is Polish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-8766/powertech_raf3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPRAF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8766/powertech_raf3_propeller_tohatsu.html Powertech 13.50" Diameter PTR4 Bowlifting Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech PTR4-Tohatsu Outboard Lifter Powertech propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15 to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this Powertech prop is great for high performance applications requiring grip, lift and speed.Equivalent to Laser & Ballistic XL... 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9252/powertech_ptr4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPPTR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9252/powertech_ptr4_propeller_tohatsu.html Powertech 13.50" Diameter Bowlifting Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech PTR3-Tohatsu Outboard Lifter Powertech propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15 to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this Powertech prop is great for high performance applications requiring grip, lift and speed.Equivalent to Laser & Ballistic XL... 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9251/powertech_ptr3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPPTR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9251/powertech_ptr3_propeller_tohatsu.html Powertech 13.00" Diameter PFS4-Blade Flats Supercup Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech PFS4 Tohatsu Outboard Flats Supercup propeller is a 13 diameter propeller available in 1 increments from 12 to 17. 4-blade with right-hand rotation, the triple-cupped Flats Supercup is designed for extreme motor elevation. If replacing an all-purpose propeller, reduce pitch 3 to 4. 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9250/powertech_pfs4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPPFS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9250/powertech_pfs4_propeller_tohatsu.html Powertech 14.00" Diameter PFO4 Flats 4-Blade Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech PFO4 Tohatsu Outboard Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 16 to 20. 4 blades with right-hand rotation, this prop provides greater grip and motor elevation than the PFS4 series. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9249/powertech_pfo4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPPFO41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9249/powertech_pfo4_propeller_tohatsu.html Powertech 13.25" Diameter NRS4- Blade Turbo Series Stainless Propeller fits 60-140hp Tohatsu Outboards. Powertech NRS4 Tohatsu Outboard Turbo propeller is a 13.25 diameter propeller available in 1 increments from 14 to 21. Available in right- and left-hand rotation, perfect Flats n Bay prop. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9248/powertech_nrs4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPNRS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9248/powertech_nrs4_propeller_tohatsu.html Powertech 13.25" Diameter NRS3-Turbo Series Stainless Propeller fits 60-140hp Tohatsu Outboards. Powertech NRS3 Tohatsu Outboard Turbo propeller is a 13.25 diameter propeller available in 1 pitch increments from 14 to 21. Available in right- or left-hand rotation, 25&#8304; rake with good lift and extensive cup. This propeller is more aggressive than the PowerTech RED styles, and less aggressive than the PTR style. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9247/powertech_nrs3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPNRS31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9247/powertech_nrs3_propeller_tohatsu.html Powertech MQF3 Sternlifter Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech MQF3-Tohatsu Outboard Sternlifter Powertech Prop is a 13.75 to 13.00" diameter propeller available in 13 and 15 pitch. 3-blade with right-hand rotation, this propeller is the factory equivalent of the Mercury Black Max. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9246/powertech_mfq3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPMQF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9246/powertech_mfq3_propeller_tohatsu.html Powertech 14.00" Diameter CFF4 Coastal Flats Stainless Propeller fits 60-140 HP Tohatsu Outboards... Powertech CFF4 Tohatsu Outboard Coastal Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 12 thru 19. Specialized coastal flats prop with high aspect ratio blade geometry. This provides excellent grip, holeshot, and motor elevation capability for coastal shallows and flats. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 60C (Large Gear case) thru 1999 70C (Large Gear case) thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 115 HP 1992-2001 115 HP 1992-2001 120 HP 1988-2003 115 HP TLDI 2004 & Newer 140 HP 1988-2003 140 HP 1988-2003 http://www.getaprop.com/content-product_info/product_id-9245/powertech_cff4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPCFF41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9245/powertech_cff4_propeller_tohatsu.html Michigan Ballistic-3 XL Stainless Propeller fits 60-130 HP Evinrude Johnson Outboards... Rubber Hub Bushing V4 Gearcase 15 Tooth Spline Thru Hub Exhaust High Polish Finish BFP 60 HP 2010 & Newer BF 75 HP 1995 and Newer BF 90 HP 1995 and Newer BF 115 HP 1998 and Newer BF 130 HP 1998 and 2004 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9413/michigan_ballistic_xl_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-9413/michigan_ballistic_xl_propeller_honda.html Michigan Ballistic-3 Stainless Propeller fits 60-130 HP Honda Outboards... Rubber Hub Bushing V4 Gearcase 15 Tooth Spline Thru Hub Exhaust High Polish Finish BFP 60 HP 2010 & Newer BF 75 HP 1995 and Newer BF 90 HP 1995 and Newer BF 115 HP 1998 and Newer BF 130 HP 1998 and 2004 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-9412/michigan_ballistic_propeller_honda.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-9412/michigan_ballistic_propeller_honda.html 3 1/2" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 3 1/2" Thread Size: 2 1/2"-4 Key Dia/Length: 7/8"x9 1/4" Stainless Cotter Pin: 3/8"x3" http://www.getaprop.com/content-product_info/product_id-2944/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2944/propeller_shaft_nut_kit.html 4" Bronze Nut/Kit... A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 4" Thread Size: 3"-4 Key Dia/Length: 1"x10 1/2" Stainless Cotter Pin: 3/8"x3 1/2" http://www.getaprop.com/content-product_info/product_id-2945/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2945/propeller_shaft_nut_kit.html 3" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 3" Thread Size: 2 1/4"-4.5 Key Dia./Length: 3/4"x7 11/32" Stainless Cotter Pin: 1/4"x3" http://www.getaprop.com/content-product_info/product_id-2943/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2943/propeller_shaft_nut_kit.html 2 1/4" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 2 1/4" Thread Size: 1 3/4"-5 Key Dia./Length: 9/16"x5 5/8" Stainless Cotter Pin: 1/4"x2 1/4" http://www.getaprop.com/content-product_info/product_id-2940/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2940/propeller_shaft_nut_kit.html 2 1/2" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 2 1/2" Thread Size: 1 3/4"-5 Key Dia./Length: 5/8"x6 3/32" Stainless Cotter Pin: 1/4"x2 1/4" http://www.getaprop.com/content-product_info/product_id-2941/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2941/propeller_shaft_nut_kit.html 2 3/4" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 2 3/4" Thread Size: 2"-4.5 Key Dia/Length: 5/8"x6 21/32" Stainless Cotter Pin: 1/4"x2 1/2" http://www.getaprop.com/content-product_info/product_id-2942/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2942/propeller_shaft_nut_kit.html Ski Boat Propeller Shaft NyLoc Nut Kit Fits 1" and 1 1/8" shafts... Brass nyloc Propeller nut Stainless Steel cotter pin. Brass shaft key with radius edges. All hardware fits 1" and 1-1/8" propeller shafts. http://www.getaprop.com/content-product_info/product_id-7761/ski_boat_hardware_nyloc_nut_kit.html http://www.getaprop.com/images/products/NILOCK KIT.JPG http://www.getaprop.com/content-product_info/product_id-7761/ski_boat_hardware_nyloc_nut_kit.html 1 1/2" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 1 1/2" Thread Size: 1 1/8"-7 Key Dia./Length: 3/8"x3 1/2" Stainless Cotter Pin: 5/32"x1 1/2" http://www.getaprop.com/content-product_info/product_id-2937/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2937/propeller_shaft_nut_kit.html 1 3/8" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 1 3/8" Thread Size: 1"-8 Key Dia./Length: 5/16"x3 3/16" Stainless Cotter Pin: 5/32"x1 1/2" http://www.getaprop.com/content-product_info/product_id-2936/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2936/propeller_shaft_nut_kit.html 1 1/4" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 1 1/4" Thread Size: 7/8"-9 Key Dia./Length: 5/16"x3 3/16" Stainless Cotter Pin: 5/32"x1 1/4" http://www.getaprop.com/content-product_info/product_id-2935/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2935/propeller_shaft_nut_kit.html 1" And 1 1/8" Bronze Nut/Kit...A heavy hex full size nut. A heavy hex jam or half nut. Radius key stock in a length appropriate for your shaft size. Stainless steel cotter pin. Shaft Diameter: 1" and 1 1/8" Thread Size: 3/4"-10 Key Dia./Length: 1/4"x2 1/8" Stainless Cotter Pin: 1/8"x1" http://www.getaprop.com/content-product_info/product_id-2934/propeller_shaft_nut_kit.html http://www.getaprop.com/images/products/14953_S_J_592014_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-2934/propeller_shaft_nut_kit.html Solas New Saturn-3 Rubex Stainless Propeller Fits 135-300 Mercury Outboards... Thru-Hub Exhaust & 15 Tooth Spline Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7603/solas_new_saturn_3_rubex_propeller_mercury.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7603/solas_new_saturn_3_rubex_propeller_mercury.html Solas Lexor-4 Rubex Stainless Propeller Fits 135-300 Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Lexor-4 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7601/solas_lexor_4_rubex_propeller_mercury.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7601/solas_lexor_4_rubex_propeller_mercury.html "New" Solas Lexor-3 Rubex Stainless Propeller Fits 135-300 Mercury Outboards... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 202 (Not Included) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7604/solas_lexor_3_rubex_propeller_mercury.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7604/solas_lexor_3_rubex_propeller_mercury.html Solas Lexor-3 Plus Rubex Propeller Fits 135-300 Mercury Outboards... New Larger Diameter Interchangeable Hub System Thru-Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 202 (Not Included) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7605/solas_lexor_3_plus_rubex_propeller_mercury.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7605/solas_lexor_3_plus_rubex_propeller_mercury.html Solas HR Titan-4 Rubex Stainless Propeller Fits 135-300 Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7602/solas_hr_titan_4_rubex_propeller_mercury.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7602/solas_hr_titan_4_rubex_propeller_mercury.html Quicksilver Lightspeed Stainless Steel Propeller fits 135-300 HP Mercury Outboards... Similar to Mercury Laser II Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline Affordable replacement same as Mercury Laser II 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-5475/quicksilver_lightspeed_propeller_mercury.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-5475/quicksilver_lightspeed_propeller_mercury.html Quicksilver QST-5 Outboard Propeller fits 135-300 HP Mercury Outboards... Similar to Mercury High Five Requires XHS(Drop-In Hub) Kit #202 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-8167/quicksilver_qst_5_propeller.html http://www.getaprop.com/images/products/QS51.JPG http://www.getaprop.com/content-product_info/product_id-8167/quicksilver_qst_5_propeller.html Quicksilver Silverado Stainless Steel Propeller fits 135-300 HP Mercury Outboards... Equal to Mercury Vengeance Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-5464/quicksilver_silverado_propeller_mercury.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5464/quicksilver_silverado_propeller_mercury.html Quicksilver Thunderbolt Stainless Steel Propeller fits 135-300 HP Mercury Outboards... Equal to Mercury Mirage Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-5486/quicksilver_thunderbolt_propeller_mercury.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-5486/quicksilver_thunderbolt_propeller_mercury.html Quicksilver Typhoon Stainless Propeller fits 135-300 HP Mercury Outboards... Similar to Mercury Revolution-4 Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Stainless steel design Delivers tough, durable performance Provides better acceleration, aggressive holding and tremendous bow lift http://www.getaprop.com/content-product_info/product_id-5496/quicksilver_typhoon_propeller_mercury.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-5496/quicksilver_typhoon_propeller_mercury.html Michigan Apollo-4 Stainless Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5305/michigan_apollo_4_propeller_mercury.html http://www.getaprop.com/images/products/ap4.jpg http://www.getaprop.com/content-product_info/product_id-5305/michigan_apollo_4_propeller_mercury.html Large Dia. Michigan Apollo-3 Stainless Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5294/michigan_apollo_3_xl_propeller_mercury.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5294/michigan_apollo_3_xl_propeller_mercury.html Michigan Apollo-3 Stainless Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 202 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5274/michigan_apollo_3_propeller_mercury.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5274/michigan_apollo_3_propeller_mercury.html Solas New Saturn-3 Rubex Stainless Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7353/solas_new_saturn_3_rubex_propeller_honda.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7353/solas_new_saturn_3_rubex_propeller_honda.html Solas Lexor-4 Rubex Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Lexor-4 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7354/solas_lexor_4_rubex_propeller_honda.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7354/solas_lexor_4_rubex_propeller_honda.html New Solas Lexor-3 Rubex Stainless Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Luxor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7357/solas_lexor_3_rubex_propeller_honda.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7357/solas_lexor_3_rubex_propeller_honda.html Solas Lexor-3 Plus Rubex Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The Lexor Plus series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7355/solas_lexor_3_plus_rubex_propeller_honda.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7355/solas_lexor_3_plus_rubex_propeller_honda.html Solas HR Titan-4 Rubex Stainless Propeller Fits 135-225 HP Honda Outboards...(High Rake) Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7356/solas_hr_titan_4_rubex_propeller_honda.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7356/solas_hr_titan_4_rubex_propeller_honda.html Michigan Apollo-4 Stainless Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2003 and Newer 225 HP 2003 and Newer Requires XHS Hub Kit # 207 (Not Included) 2003 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7436/michigan_apollo_4_propeller_honda.html http://www.getaprop.com/images/products/ap4.jpg http://www.getaprop.com/content-product_info/product_id-7436/michigan_apollo_4_propeller_honda.html Michigan Apollo-3 XL Stainless Propeller fits 135-225 Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2003 and Newer 225 HP 2003 and Newer Requires XHS Hub Kit # 207 (Not Included) 2003 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7744/michigan_apollo_3_xl_propeller_honda.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7744/michigan_apollo_3_xl_propeller_honda.html Michigan Apollo-3 Stainless Propeller fits 135-225 Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2003 and Newer 225 HP 2003 and Newer Requires XHS Hub Kit # 207 (Not Included) 2003 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7435/michigan_apollo_3_propeller_honda.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7435/michigan_apollo_3_propeller_honda.html Michigan Apollo-3 Stainless Propeller fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 117 (Not Included) High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5633/michigan_apollo_3_propeller_yamaha.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5633/michigan_apollo_3_propeller_yamaha.html Michigan Apollo-4 Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5555/michigan_apollo_4_propeller_suzuki.html http://www.getaprop.com/images/products/ap4.jpg http://www.getaprop.com/content-product_info/product_id-5555/michigan_apollo_4_propeller_suzuki.html Michigan Large Diameter Apollo-3 XL Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-5545/michigan_apollo_3_xl_propeller_suzuki.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5545/michigan_apollo_3_xl_propeller_suzuki.html Michigan Apollo-3 Stainless Propeller fits 150-300 HP Suzuki Outboards.... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. Requires XHS Hub Kit # 104 (Not Included) http://www.getaprop.com/content-product_info/product_id-5527/michigan_apollo_3_propeller_suzuki.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5527/michigan_apollo_3_propeller_suzuki.html Michigan Apollo-3 Stainless Propeller fits 35-65 HP Suzuki Outboards... Requires XHS Hub Kit # 115 (Not Included) Thru Hub Exhaust & 13 Tooth Spline DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-7469/michigan_apollo_3_propeller_suzuki.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7469/michigan_apollo_3_propeller_suzuki.html Michigan Apollo Stainless Propeller fits 35-70 HP Nissan Tohatsu Outboards... Thru Hub Exhaust 13 Tooth Spline Requires Hub Kit (Not Included) USE XHS116 Hub Kit (Not Included) 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer USE XHS112 Hub Kit (Not Included) 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7377/michigan_apollo_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7377/michigan_apollo_propeller_nissan_tohatsu.html Michigan Apollo Stainless Propeller fits 40-140 HP Mercury Outboards... Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-5257/michigan_apollo_3_propeller_mercury.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5257/michigan_apollo_3_propeller_mercury.html Michigan Apollo Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 114 (Not Included) Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-5248/michigan_apollo_3_propeller_mercury.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-5248/michigan_apollo_3_propeller_mercury.html Michigan Apollo Stainless Propeller fits 75-130 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7423/michigan_apollo_propeller_honda.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7423/michigan_apollo_propeller_honda.html Michigan Apollo Stainless Propeller fits 35-60 HP Honda Outboards... Thru Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 113 (Not Included) BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7413/michigan_apollo_propeller_honda.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-7413/michigan_apollo_propeller_honda.html Michigan Apollo-4 Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4755/michigan_apollo_4_propeller_e_j.html http://www.getaprop.com/images/products/ap4.jpg http://www.getaprop.com/content-product_info/product_id-4755/michigan_apollo_4_propeller_e_j.html Michigan Large Dia. Apollo-3 XL Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4743/michigan_apollo_3_xl_propeller_e_j.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-4743/michigan_apollo_3_xl_propeller_e_j.html Michigan Apollo-3 Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4729/michigan_apollo_3_propeller_e_j.html http://www.getaprop.com/images/products/apollo312.jpg http://www.getaprop.com/content-product_info/product_id-4729/michigan_apollo_3_propeller_e_j.html Powertech 16" Diameter WBV3 Wide Thruster Series Load Pushing Propeller fits 150-300 HP Yamaha Outboards. Powertech WBV3 Yamaha Outboard Thruster series propeller is 16 diameter available in 14, 15 and 16 diameter. 3-blade propeller with right-hand rotation, this Powertech prop is a wide blade thruster series designed for load pushing, perfect for pontoons and workboats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9385/powertech_wbv3_propeller_yamaha.html http://www.getaprop.com/images/products/GPWBV31.JPG http://www.getaprop.com/content-product_info/product_id-9385/powertech_wbv3_propeller_yamaha.html Powertech 15.50" Diameter WBB3 Thruster Series Load Pushing Propeller fits 150-300 HP Yamaha Outboards. Powertech WBB3 Yamaha Outboard Thruster series Powertech propeller is 15.50 diameter available in 1 pitch increments from 11 to 14. 3-blade in right- or left-hand rotation, this is a wide-blade thruster series designed for load pushing, excellent for pontoon and work boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9386/powertech_wbb3_propeller_yamaha.html http://www.getaprop.com/images/products/WBB3.JPG http://www.getaprop.com/content-product_info/product_id-9386/powertech_wbb3_propeller_yamaha.html Powertech 15.25" Diameter VMX3 Large Diameter Bass Boat-3 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech VMX3 Yamaha Outboard High Performance Bass-Bay Powertech propeller is 15.25 diameter available in one inch pitch increments from 23 thru 27. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. Bass and bay boat propeller, this typically runs best at higher motor elevations. Most similar to the Yamaha V-Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9387/powertech_vmx3_propeller_yamaha.html http://www.getaprop.com/images/products/VMX3.JPG http://www.getaprop.com/content-product_info/product_id-9387/powertech_vmx3_propeller_yamaha.html Powertech 14.625" Diameter VMS3 Baby Bass-3 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech VMS3 Yamaha Outboard High Performance Bass-Bay Powertech propeller is 14.625 diameter available in 23, 24 or 25 pitch. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. An excellent bass boat propeller, this typically runs best at higher motor elevations. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9388/powertech_vms3_propeller_yamaha.html http://www.getaprop.com/images/products/VMS3.JPG http://www.getaprop.com/content-product_info/product_id-9388/powertech_vms3_propeller_yamaha.html Powertech 13.75 diameter TRO4 Accelerator Stainless Propeller fits 150-300 HP Yamaha Outboards, Similar to Mercury Trophy, OMC Renegade... Powertech TRO4 Yamaha Outboard Accelerator Propeller is a constant 13.75 diameter available in 1 pitch increments from 17 to 28. 4-blade with right-hand rotation, this prop has a high rake and sharp radius cup for excellent lift. A small hub can be run over- or through-hub exhaust or sealed with ring. Prefers higher motor elevations, most similar to the Mercury Trophy. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits.. Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9389/powertech_tro4_propeller_yamaha.html http://www.getaprop.com/images/products/GPTRO4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9389/powertech_tro4_propeller_yamaha.html Powertech 14.25" Diameter SFS4 Baby Offshore Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech SFS4 Yamaha Outboard Baby Offshore Four Blade Propeller is 14.25 diameter available in 1 increments 17 to 23. 4-blade in right-hand rotation, the Baby-4 has great performance as an all around propeller for ski boats, I/Os, runabouts and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9390/powertech_sfs4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9390/powertech_sfs4_propeller_yamaha.html Powertech 14.25" Diameter SFS3 Baby Offshore Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech SFS3 Yamaha Outboard Baby Offshore Propeller is 14.25 diameter available in 1 increments 17 to 23. 3-blade in right-hand rotation, the Baby has moderate rake and full tip cup, an excellent all around propeller for ski boats, I/Os and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9391/powertech_sfs3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9391/powertech_sfs3_propeller_yamaha.html Powertech 14" Diameter SCE4-Semi Cleaver Sternlifting Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech SCE4 Yamaha Outboard Semi Cleaver four blade propeller is 14 diameter available in 1 pitch increments from 15 to 21. 4-blade design with right- or left-hand rotation, the Semi-Cleaver has improved sternlift over the SCE3. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9392/powertech_sce4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9392/powertech_sce4_propeller_yamaha.html Powertech 14" Diameter SCE3-Semi Cleaver Sternlifting Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech SCE3 Yamaha Outboard Semi Cleaver Propeller is a constant 14 diameter available in 1 increments from 15 to 21. 3-blades in right- or left-hand rotation, the geometry leads to sternlifting, easy-to-turn geometry, similar to the Yamaha semi-cleaver series. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9393/powertech_sce3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9393/powertech_sce3_propeller_yamaha.html Powertech 14.625" Diameter RKR4 Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech RKR4 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9394/powertech_rkr4_propeller_yamaha.html http://www.getaprop.com/images/products/GPRKR4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9394/powertech_rkr4_propeller_yamaha.html Powertech 14.625" Diameter RKR3 Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech RKR3 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9395/powertech_rkr3_propeller_yamaha.html http://www.getaprop.com/images/products/GPRKR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9395/powertech_rkr3_propeller_yamaha.html Powertech 14.25 diameter RAS3 R/Series Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech RAS3 Yamaha Outboard R/Series Powertech Propeller is 14.25 diameter, this series is available in pitch increments of 15, 17, 19 and 21. 3-blades, right- or left-handed rotation, this is a great all-around performance propeller with high performance geometry. Termed the R-series, this Powertech prop is similar to the Rapture. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9396/powertech_ras3_propeller_yamaha.html http://www.getaprop.com/images/products/GPRAS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9396/powertech_ras3_propeller_yamaha.html Powertech 14.25" Diameter PTZ4 Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech PTZ4-14.25" diameter Yamaha Outboard Propeller is available in 14"-23" pitch, 4 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC4, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9397/powertech_ptz4_propeller_yamaha.html http://www.getaprop.com/images/products/GPPTZ4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9397/powertech_ptz4_propeller_yamaha.html Powertech 14.25" Diameter PTZ3 Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech PTZ3 is a 14.25" diameter Yamaha Outboard Propeller available in 14"-23" pitch, 3 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC3, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9398/powertech_ptz3_propeller_yamaha.html http://www.getaprop.com/images/products/GPPTZ3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9398/powertech_ptz3_propeller_yamaha.html Powertech 14.25 diameter PTC4 Lifter series 4 blade Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech PTC4 Yamaha Outboard Lifter Propeller is 14.25 diameter available in 1 increments from 14 to 23. 4-blade, this right- or left-hand rotation propeller is high-rake with hardwall cupping, giving better grip and lift than the PTC3. Great hole shot and accelleration for I/Os and smaller twin-engine offshore applications needing grip. Available with the Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9399/powertech_ptc4_propeller_yamaha.html http://www.getaprop.com/images/products/GPPTC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9399/powertech_ptc4_propeller_yamaha.html Powertech 14.25 diameter PTC3 Lifter series-3 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech PTC3 Yamaha Outboard Lifter series propeller is 14.25 diameter available in 1 increments from 14 to 23. 3-blade right- or left-hand rotation, this Powertech high rake, hardwall cup provides excellent lift and grip in an all-around propeller. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9400/powertech_ptc3_propeller_yamaha.html http://www.getaprop.com/images/products/GPPTC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9400/powertech_ptc3_propeller_yamaha.html Powertech PFL4-14.50" Diameter Flats-4 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech PFL4 Yamaha Outboard Supercup Propeller is 14.5 diameter available in 1 pitch increments from 15 to 19. 4-blade with right-hand rotation, this Powertech prop has moderate rake and triple cup for extreme motor elevation designed for flats applications. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9401/powertech_pfl4_propeller_yamaha.html http://www.getaprop.com/images/products/GPPFL4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9401/powertech_pfl4_propeller_yamaha.html Powertech Diameter varies OSS3-SST Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech OSS3 SST Yamaha Outboard Stern Lifting Propeller, Diameter varies with pitch, available in 2 increments in 15 to 21. 3-blades with right-hand rotation, this Powertech propeller is the factory equivalent to the OMC SST and Volvo I/O. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9402/powertech_oss3_propeller_yamaha.html http://www.getaprop.com/images/products/GPOSS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9402/powertech_oss3_propeller_yamaha.html Powertech 15.25 diameter OFX4 Performance Offshore-4 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech OFX4 Yamaha Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 4-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics and better motor elevation capability than the OFX3, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9403/powertech_ofx_4_propeller_yamaha.html http://www.getaprop.com/images/products/GPOFX4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9403/powertech_ofx_4_propeller_yamaha.html Powertech 15.25 diameter OFX3 Performance Offshore Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech OFX3-Yamaha Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 3-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9404/powertech_ofx_3_propeller_yamaha.html http://www.getaprop.com/images/products/GPOFX3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9404/powertech_ofx_3_propeller_yamaha.html Powertech 15.25 diameter Offshore-4 Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech OFS4-Offshore Yamaha Outboard Propeller is 15.25 diameter available in 1 increments from 14 to 30. In right- or left-hand rotation with moderately high rake and full tip cup, this Powertech propeller has excellent lift and grip, good for single- or twin-engine offshore applications and sterndrives. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9405/powertech_ofs4_propeller_yamaha.html http://www.getaprop.com/images/products/GPOFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9405/powertech_ofs4_propeller_yamaha.html Powertech 15.25 diameter OFS3 Offshore Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech OFS3-Offshore Series Yamaha Outboard Propeller is 15.25 diameter available in 1 from 14 to 30. 3-blades with right- or left-hand rotation, this powertech propeller has a moderately high rake and full tip cup for excellent lift and grip. Comparable to the Mercury Mirage or Yamaha SaltWater series. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9406/powertech_ofs3_propeller_yamaha.html http://www.getaprop.com/images/products/GPOFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9406/powertech_ofs3_propeller_yamaha.html Powertech MQS4-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech MQS4 Yamaha Outboard Ski Max Propeller Diameter varies with pitch, available in 1 pitch increments from 15 to 21. 4-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9407/powertech_mqs4_propeller_yamaha.html http://www.getaprop.com/images/products/GPMQS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9407/powertech_mqs4_propeller_yamaha.html Powertech MQS3-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech MQS3-Yamaha Outboard Ski Max Propeller, Diameter varies with pitch, available in 1 pitch increments from 15 to 23. 3-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9408/powertech_mqs3_propeller_yamaha.html http://www.getaprop.com/images/products/GPMQS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9408/powertech_mqs3_propeller_yamaha.html Powertech Diameter varies ELE4 X/Series Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech ELE4 Yamaha Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 4-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9409/powertech_ele4_propeller_yamaha.html http://www.getaprop.com/images/products/GPELE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9409/powertech_ele4_propeller_yamaha.html Powertech ELE3 X/Series Diameter varies Stainless Propeller fits 150-300 HP Yamaha Outboards... Powertech ELE3 Yamaha Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 3-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9410/powertech_ele3_propeller_yamaha.html http://www.getaprop.com/images/products/GPELE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9410/powertech_ele3_propeller_yamaha.html Powertech 15" Diameter CFS4 Coastal Flats 4 Blade Stainless Propeller fits 150-300 HP Yamaha Outboards. Powertech CFS4 - 15 diameter Yamaha Outboard Propeller is available in 1 pitch increments from 15 to 23. A coastal flats propeller, this Powertech prop has high-aspect-ratio blade geometry, excellent grip, holeshot and motor elevation capability for coastal shallows and flats work. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLY200 Cushion Loc Hub (Included) XHS203 Universal Hub Kit (Optional) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer VF200,225,250 (VMAX-SHO) 2010 and Newer - Sho-Ring Required. 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9411/powertech_cfs4_propeller_yamaha.html http://www.getaprop.com/images/products/GPCFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9411/powertech_cfs4_propeller_yamaha.html Power Tech Performance Offshore-4 Blade Stainless Propeller fits 300-350 HP Yamaha Outboards... Thru-Hub Exhaust, 19 Tooth Spline Included Cushion Loc Hub System 19 spline Included Finish is High Polish F300,LF300,F350,LF350 The LFS-4 blade style is similar to the Yamaha factory design Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. The LFS-4 has a constant 16" inch diameter, regardless of pitch. It is available in every inch of pitch from 16-23, right & left hand rotation with the Premium Cushion Loc 19 Tooth Spline Hub design. http://www.getaprop.com/content-product_info/product_id-8818/power_tech_performance_offshore_4_yamaha.html http://www.getaprop.com/images/products/GPLFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-8818/power_tech_performance_offshore_4_yamaha.html Power Tech Performance Offshore-3 Blade Stainless Propeller fits 300-350 HP Yamaha Outboards... Thru-Hub Exhaust, 19 Tooth Spline Included Cushion Loc Hub System 19 spline Included Finish is High Polish F300,LF300,F350,LF350 The LFS-3 blade style is similar to the Yamaha factory design Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. The LFS-3 has a constant 16" inch diameter, regardless of pitch. It is available in every inch of pitch from 16-23, right & left hand rotation with the Premium Cushion Loc 19 Tooth Spline Hub design. http://www.getaprop.com/content-product_info/product_id-8817/power_tech_performance_offshore_yamaha.html http://www.getaprop.com/images/products/GPLFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8817/power_tech_performance_offshore_yamaha.html Power Tech OFX-3 Blade Stainless Propeller fits 300-350 HP Mercury Verado Outboards... Thru-Hub Exhaust, 19 Tooth Spline Included Finish is Polish 300X, 350HP Verado 840389Q06 Mercury Flo-Torq HD Hub Kit 300X, 350HP Verado Powertech OFX3 - 15.25 diameter, This High Performance Offshore Powertech Propeller for Mercury Outboards is available in 1 pitch increments from 14 to 30. 3-blades with right- and left-hand rotation, this prop has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics, this Powertech prop is used on many high performance flats, bays and muscle boats. Available with Square Hub to receive the Vortex/Flo-Torq hub kits... http://www.getaprop.com/content-product_info/product_id-8811/powertech_ofx3_propeller_mercury.html http://www.getaprop.com/images/products/GPOFX3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8811/powertech_ofx3_propeller_mercury.html Power Tech OFX-4 Blade Stainless Propeller fits 300-350 HP Mercury Verado Outboards... Thru-Hub Exhaust, 19 Tooth Spline Included Finish is Polish 300X, 350HP Verado 840389Q06 Mercury Flo-Torq HD Hub Kit 300X, 350HP Verado Powertech OFX4 - 15.25 diameter, This Mercury Outboard Powertech Propeller is available in 1 pitch increments from 14 to 30. 4-blades with right- and left-hand rotation, this Powertech prop has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics and better motor elevation capability than the OFX3, this prop is used on many high performance flats, bays and muscle boats. Available with Square Hub to receive the Vortex/Flo-Torq hub kits... http://www.getaprop.com/content-product_info/product_id-8812/powertech_ofx4_propeller_mercury.html http://www.getaprop.com/images/products/GPOFX4 copy.jpg http://www.getaprop.com/content-product_info/product_id-8812/powertech_ofx4_propeller_mercury.html Power Tech Performance Offshore-4 Blade Stainless Propeller fits 300-350 HP Mercury Verado Outboards... Thru-Hub Exhaust, 19 Tooth Spline Included Finish is Polish 300X, 350HP Verado 840389Q06 Mercury Flo-Torq HD Hub Kit 300X, 350HP Verado The LFS blade style is similar to the new factory design Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. The LFS has a constant 16" inch diameter, regardless of pitch. It is available in every inch of pitch from 16-23, right & left hand rotation with the Optional 19 Tooth Spline 300X, 350HP Verado. http://www.getaprop.com/content-product_info/product_id-8814/powertech_lfs4_propeller_mercury.html http://www.getaprop.com/images/products/GPLFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-8814/powertech_lfs4_propeller_mercury.html Power Tech Performance Offshore-3 Blade Stainless Propeller fits 300-350 HP Mercury Verado Outboards... Thru-Hub Exhaust, 19 Tooth Spline Included Finish is Polish 300X, 350HP Verado 840389Q06 Mercury Flo-Torq HD Hub Kit The LFS blade style is similar to the new factory design Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. The LFS-3 has a constant 16" inch diameter, regardless of pitch. It is available in every inch of pitch from 16-23, right & left hand rotation with Optional 19 Tooth Spline 300X, 350HP Verado http://www.getaprop.com/content-product_info/product_id-8813/powertech_lfs3_propeller_mercury.html http://www.getaprop.com/images/products/GPLFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8813/powertech_lfs3_propeller_mercury.html Powertech 16" Diameter WBV3 Wide Thruster Series Load Pushing Propeller fits 150-300 HP Suzuki Outboards. Powertech WBV3 Suzuki Outboard Thruster series propeller is 16 diameter available in 14, 15 and 16 diameter. 3-blade propeller with right-hand rotation, this Powertech prop is a wide blade thruster series designed for load pushing, perfect for pontoons and workboats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9349/powertech_wbv3_propeller_suzuki.html http://www.getaprop.com/images/products/GPWBV31.JPG http://www.getaprop.com/content-product_info/product_id-9349/powertech_wbv3_propeller_suzuki.html Powertech 15.50" Diameter WBB3 Thruster Series Load Pushing Propeller fits 150-300 HP Suzuki Outboards. Powertech WBB3 Suzuki Outboard Thruster series Powertech propeller is 15.50 diameter available in 1 pitch increments from 11 to 14. 3-blade in right- or left-hand rotation, this is a wide-blade thruster series designed for load pushing, excellent for pontoon and work boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9350/powertech_wbb3_propeller_suzuki.html http://www.getaprop.com/images/products/WBB3.JPG http://www.getaprop.com/content-product_info/product_id-9350/powertech_wbb3_propeller_suzuki.html Powertech 15.25" Diameter VMX3 Large Diameter Bass Boat-3 Blade Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech VMX3 Suzuki Outboard High Performance Bass-Bay Powertech propeller is 15.25 diameter available in one inch pitch increments from 23 thru 27. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. Bass and bay boat propeller, this typically runs best at higher motor elevations. Most similar to the Yamaha V-Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9351/powertech_vmx3_propeller_suzuki.html http://www.getaprop.com/images/products/VMX3.JPG http://www.getaprop.com/content-product_info/product_id-9351/powertech_vmx3_propeller_suzuki.html Powertech 14.625" Diameter VMS3 Baby Bass-3 Blade Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech VMS3 Suzuki Outboard High Performance Bass-Bay Powertech propeller is 14.625 diameter available in 23, 24 or 25 pitch. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. An excellent bass boat propeller, this typically runs best at higher motor elevations. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9352/powertech_vms3_propeller_suzuki.html http://www.getaprop.com/images/products/VMS3.JPG http://www.getaprop.com/content-product_info/product_id-9352/powertech_vms3_propeller_suzuki.html Powertech 13.75 diameter TRO4 Accelerator Stainless Propeller fits 150-300 HP Suzuki Outboards, Similar to Mercury Trophy, OMC Renegade... Powertech TRO4 Suzuki Outboard Accelerator Propeller is a constant 13.75 diameter available in 1 pitch increments from 17 to 28. 4-blade with right-hand rotation, this prop has a high rake and sharp radius cup for excellent lift. A small hub can be run over- or through-hub exhaust or sealed with ring. Prefers higher motor elevations, most similar to the Mercury Trophy. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits.. Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9353/powertech_tro4_propeller_suzuki.html http://www.getaprop.com/images/products/GPTRO4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9353/powertech_tro4_propeller_suzuki.html Powertech 14.25" Diameter SFS4 Baby Offshore Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech SFS4 Suzuki Outboard Baby Offshore Four Blade Propeller is 14.25 diameter available in 1 increments 17 to 23. 4-blade in right-hand rotation, the Baby-4 has great performance as an all around propeller for ski boats, I/Os, runabouts and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9354/powertech_sfs4_propeller_suzuki.html http://www.getaprop.com/images/products/GPSFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9354/powertech_sfs4_propeller_suzuki.html Powertech 14.25" Diameter SFS3 Baby Offshore Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech SFS3 Suzuki Outboard Baby Offshore Propeller is 14.25 diameter available in 1 increments 17 to 23. 3-blade in right-hand rotation, the Baby has moderate rake and full tip cup, an excellent all around propeller for ski boats, I/Os and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9355/powertech_sfs3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9355/powertech_sfs3_propeller_suzuki.html Powertech 14" Diameter SCE4-Semi Cleaver Sternlifting Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech SCE4 Suzuki Outboard Semi Cleaver four blade propeller is 14 diameter available in 1 pitch increments from 15 to 21. 4-blade design with right- or left-hand rotation, the Semi-Cleaver has improved sternlift over the SCE3. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9356/powertech_sce4_propeller_suzuki.html http://www.getaprop.com/images/products/GPSCE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9356/powertech_sce4_propeller_suzuki.html Powertech 14" Diameter SCE3-Semi Cleaver Sternlifting Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech SCE3 Suzuki Outboard Semi Cleaver Propeller is a constant 14 diameter available in 1 increments from 15 to 21. 3-blades in right- or left-hand rotation, the geometry leads to sternlifting, easy-to-turn geometry, similar to the Yamaha semi-cleaver series. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9357/powertech_sce3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSCE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9357/powertech_sce3_propeller_suzuki.html Powertech 14.625" Diameter RKR4 Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech RKR4 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9358/powertech_rkr4_propeller_suzuki.html http://www.getaprop.com/images/products/GPRKR4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9358/powertech_rkr4_propeller_suzuki.html Powertech 14.625" Diameter RKR3 Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech RKR3 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9359/powertech_rkr3_propeller_suzuki.html http://www.getaprop.com/images/products/GPRKR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9359/powertech_rkr3_propeller_suzuki.html Powertech 14.25 diameter RAS3 R/Series Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech RAS3 Suzuki Outboard R/Series Powertech Propeller is 14.25 diameter, this series is available in pitch increments of 15, 17, 19 and 21. 3-blades, right- or left-handed rotation, this is a great all-around performance propeller with high performance geometry. Termed the R-series, this Powertech prop is similar to the Rapture. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9360/powertech_ras3_propeller_suzuki.html http://www.getaprop.com/images/products/GPRAS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9360/powertech_ras3_propeller_suzuki.html Powertech 14.25" Diameter PTZ4 Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech PTZ4-14.25" diameter Suzuki Outboard Propeller is available in 14"-23" pitch, 4 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC4, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9361/powertech_ptz4_propeller_suzuki.html http://www.getaprop.com/images/products/GPPTZ4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9361/powertech_ptz4_propeller_suzuki.html Powertech 14.25" Diameter PTZ3 Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech PTZ3 is a 14.25" diameter Suzuki Outboard Propeller available in 14"-23" pitch, 3 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC3, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9362/powertech_ptz3_propeller_suzuki.html http://www.getaprop.com/images/products/GPPTZ3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9362/powertech_ptz3_propeller_suzuki.html Powertech 14.25 diameter PTC4 Lifter series 4 blade Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech PTC4 Suzuki Outboard Lifter Propeller is 14.25 diameter available in 1 increments from 14 to 23. 4-blade, this right- or left-hand rotation propeller is high-rake with hardwall cupping, giving better grip and lift than the PTC3. Great hole shot and accelleration for I/Os and smaller twin-engine offshore applications needing grip. Available with the Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9363/powertech_ptc4_propeller_suzuki.html http://www.getaprop.com/images/products/GPPTC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9363/powertech_ptc4_propeller_suzuki.html Powertech 14.25 diameter PTC3 Lifter series-3 Blade Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech PTC3 Suzuki Outboard Lifter series propeller is 14.25 diameter available in 1 increments from 14 to 23. 3-blade right- or left-hand rotation, this Powertech high rake, hardwall cup provides excellent lift and grip in an all-around propeller. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9364/powertech_ptc3_propeller_suzuki.html http://www.getaprop.com/images/products/GPPTC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9364/powertech_ptc3_propeller_suzuki.html Powertech PFL4-14.50" Diameter Flats-4 Blade Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech PFL4 Suzuki Outboard Supercup Propeller is 14.5 diameter available in 1 pitch increments from 15 to 19. 4-blade with right-hand rotation, this Powertech prop has moderate rake and triple cup for extreme motor elevation designed for flats applications. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9365/powertech_pfl4_propeller_suzuki.html http://www.getaprop.com/images/products/GPPFL4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9365/powertech_pfl4_propeller_suzuki.html Powertech Diameter varies OSS3-SST Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech OSS3 SST Suzuki Outboard Stern Lifting Propeller, Diameter varies with pitch, available in 2 increments in 15 to 21. 3-blades with right-hand rotation, this Powertech propeller is the factory equivalent to the OMC SST and Volvo I/O. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9366/powertech_oss3_propeller_suzuki.html http://www.getaprop.com/images/products/GPOSS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9366/powertech_oss3_propeller_suzuki.html Powertech 15.25 diameter OFX4 Performance Offshore-4 Blade Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech OFX4 Suzuki Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 4-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics and better motor elevation capability than the OFX3, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9367/powertech_ofx_4_propeller_suzuki.html http://www.getaprop.com/images/products/GPOFX4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9367/powertech_ofx_4_propeller_suzuki.html Powertech 15.25 diameter OFX3 Performance Offshore Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech OFX3-Suzuki Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 3-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9368/powertech_ofx_3_propeller_suzuki.html http://www.getaprop.com/images/products/GPOFX3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9368/powertech_ofx_3_propeller_suzuki.html Powertech 15.25 diameter Offshore-4 Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech OFS4-Offshore Suzuki Outboard Propeller is 15.25 diameter available in 1 increments from 14 to 30. In right- or left-hand rotation with moderately high rake and full tip cup, this Powertech propeller has excellent lift and grip, good for single- or twin-engine offshore applications and sterndrives. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9369/powertech_ofs4_propeller_suzuki.html http://www.getaprop.com/images/products/GPOFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9369/powertech_ofs4_propeller_suzuki.html Powertech 15.25 diameter OFS3 Offshore Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech OFS3-Offshore Series Suzuki Outboard Propeller is 15.25 diameter available in 1 from 14 to 30. 3-blades with right- or left-hand rotation, this powertech propeller has a moderately high rake and full tip cup for excellent lift and grip. Comparable to the Mercury Mirage or Yamaha SaltWater series. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9370/powertech_ofs3_propeller_suzuki.html http://www.getaprop.com/images/products/GPOFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9370/powertech_ofs3_propeller_suzuki.html Powertech MQS4-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech MQS4 Suzuki Outboard Ski Max Propeller Diameter varies with pitch, available in 1 pitch increments from 15 to 21. 4-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9371/powertech_mqs4_propeller_suzuki.html http://www.getaprop.com/images/products/GPMQS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9371/powertech_mqs4_propeller_suzuki.html Powertech MQS3-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech MQS3-Suzuki Outboard Ski Max Propeller, Diameter varies with pitch, available in 1 pitch increments from 15 to 23. 3-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9372/powertech_mqs3_propeller_suzuki.html http://www.getaprop.com/images/products/GPMQS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9372/powertech_mqs3_propeller_suzuki.html Powertech Diameter varies ELE4 X/Series Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech ELE4 Suzuki Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 4-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9373/powertech_ele4_propeller_suzuki.html http://www.getaprop.com/images/products/GPELE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9373/powertech_ele4_propeller_suzuki.html Powertech ELE3 X/Series Diameter varies Stainless Propeller fits 150-300 HP Suzuki Outboards... Powertech ELE3 Suzuki Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 3-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS204 Universal Hub Kit (Optional) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9374/powertech_ele3_propeller_suzuki.html http://www.getaprop.com/images/products/GPELE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9374/powertech_ele3_propeller_suzuki.html Powertech 15" Diameter CFS4 Coastal Flats 4 Blade Stainless Propeller fits 150-300 HP Suzuki Outboards. Powertech CFS4 - 15 diameter Suzuki Outboard Propeller is available in 1 pitch increments from 15 to 23. A coastal flats propeller, this Powertech prop has high-aspect-ratio blade geometry, excellent grip, holeshot and motor elevation capability for coastal shallows and flats work. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLS200 Cushion Loc Hub (Included) XHS204 Universal Hub Kit (Optional) DT 150 HP 1986 & Newer DT 175 HP 1986-92 DT 200 HP 1986 & Newer DT 225 HP 1990 & Newer DT 250 HP 2004 & Newer DF 150 HP 2006 & Newer DF 175 HP 2006 & Newer DF 200 HP 2004 & Newer DF 225 HP 2004 & Newer DF 250 HP 2004 & Newer DF 300 HP 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9375/powertech_cfs4_propeller_suzuki.html http://www.getaprop.com/images/products/GPCFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9375/powertech_cfs4_propeller_suzuki.html Quicksilver QST-5 Outboard Propeller fits 150-300 HP Suzuki Outboards... Similar to Mercury High Five Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-9378/quicksilver_qst_5_propeller_suzuki.html http://www.getaprop.com/images/products/QS51.JPG http://www.getaprop.com/content-product_info/product_id-9378/quicksilver_qst_5_propeller_suzuki.html Quicksilver Typhoon-4 Stainless Propeller fits 135-225 HP Honda Outboards... Similar to Mercury Revolution-4 Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-7441/quicksilver_typhoon_4_propeller_honda.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-7441/quicksilver_typhoon_4_propeller_honda.html Quicksilver Thunderbolt Stainless Propeller fits 135-225 HP Honda Outboards... Similar to Mercury Mirage 4 3/4 Gearcase Thru Hub Exhaust 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer... 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-7442/quicksilver_thunderbolt_propeller_honda.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-7442/quicksilver_thunderbolt_propeller_honda.html Quicksilver Silverado Stainless Propeller fits 135-225 HP Honda Outboards... Similar to Mercury Vengeance Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-7439/quicksilver_silverado_propeller_honda.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7439/quicksilver_silverado_propeller_honda.html Quicksilver Lightspeed Stainless Propeller fits 135-225 HP Honda Outboards... Similar to Mercury Laser II Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 207 (Not Included) 2002 & Newer V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-7440/quicksilver_lightspeed_propeller_honda.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-7440/quicksilver_lightspeed_propeller_honda.html Quicksilver QST-5 Outboard Propeller fits 135-225 HP Honda Outboards... Similar to Mercury High Five Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-9377/quicksilver_qst_5_propeller_honda.html http://www.getaprop.com/images/products/QS51.JPG http://www.getaprop.com/content-product_info/product_id-9377/quicksilver_qst_5_propeller_honda.html Michigan Ballistic XL 3 Blade Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009-Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8996/michigan_ballistic_xl_propeller_e_j.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-8996/michigan_ballistic_xl_propeller_e_j.html Michigan Ballistic-3 Blade Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust 15 Tooth Spline. 4.75" Gearcase High Polih Finish Rubber Hub Bushing 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009-Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8995/michigan_ballistic_propeller_e_j.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-8995/michigan_ballistic_propeller_e_j.html Stainless Solas New Saturn-3 Rubex Propeller Fits 90-300HP Evinrude/Johnson Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7295/solas_new_saturn_3_rubex_propeller_e_j.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7295/solas_new_saturn_3_rubex_propeller_e_j.html Solas Lexor-4 Stainless Rubex Propeller Fits 90-300 HP Evinrude/Johnson Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7296/solas_lexor_4_rubex_propeller_e_j.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7296/solas_lexor_4_rubex_propeller_e_j.html New Stainless Solas Lexor-3 Rubex Propeller Fits 90-300HP Evinrude/Johnson Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7299/solas_lexor_3_rubex_propeller_e_j.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7299/solas_lexor_3_rubex_propeller_e_j.html Solas Lexor-3 Plus Stainless Rubex Propeller Fits 90-300HP Evinrude/Johnson Outboards... New Larger Diameter Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7297/solas_lexor_3_plus_rubex_propeller_e_j.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7297/solas_lexor_3_plus_rubex_propeller_e_j.html Solas HR Titan-4 (High Rake) Stainless Rubex Propeller Fits 90-300 HP Evinrude/Johnson Outboards & Sterndrives... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7298/solas_hr_titan_4_rubex_propeller_e_j.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7298/solas_hr_titan_4_rubex_propeller_e_j.html Quicksilver Typhoon Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Similar to Mercury Revolution-4 Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-5116/quicksilver_typhoon_4_propeller_e_j.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-5116/quicksilver_typhoon_4_propeller_e_j.html Quicksilver Thunderbolt Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Similar to Mercury Mirage Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-5122/quicksilver_thunderbolt_propeller_e_j.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-5122/quicksilver_thunderbolt_propeller_e_j.html Quicksilver Silverado Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Similar to Mercury Vengeance Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-5108/quicksilver_silverado_propeller_e_j.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5108/quicksilver_silverado_propeller_e_j.html Quicksilver Lightspeed Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Similar to Mercury Laser II Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-5112/quicksilver_lightspeed_propeller_e_j.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-5112/quicksilver_lightspeed_propeller_e_j.html Quicksilver QST-5 Outboard Propeller fits 90-300 HP Evinrude & Johnson Outboards... Similar to Mercury High Five Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-9376/quicksilver_qst_5_propeller_e_j.html http://www.getaprop.com/images/products/QS51.JPG http://www.getaprop.com/content-product_info/product_id-9376/quicksilver_qst_5_propeller_e_j.html Quicksilver Typhoon Stainless Propeller fits 150-300 HP Suzuki Outboards... Similar to Mercury Revolution-4 Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5962/quicksilver_typhoon_propeller_suzuki.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-5962/quicksilver_typhoon_propeller_suzuki.html Quicksilver Thunderbolt Stainless Propeller fits 150-300 HP Suzuki Outboards... Similar to Mercury Mirage Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5971/quicksilver_thunderbolt_propeller_suzuki.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-5971/quicksilver_thunderbolt_propeller_suzuki.html Quicksilver Silverado Stainless Propeller fits 150-300 HP Suzuki Outboards... Similar to Mercury Vengeance Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5944/quicksilver_silverado_propeller_suzuki.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5944/quicksilver_silverado_propeller_suzuki.html Quicksilver Lightspeed Stainless Propeller fits 150-300 HP Suzuki Outboards... Similat to Mercury Laser II Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5955/quicksilver_lightspeed_propeller_suzuki.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-5955/quicksilver_lightspeed_propeller_suzuki.html Mercury High Five Outboard Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-9345/mercury_high_five_propeller_suzuki.html http://www.getaprop.com/images/products/hi555.JPG http://www.getaprop.com/content-product_info/product_id-9345/mercury_high_five_propeller_suzuki.html Solas New Saturn-3 Rubex Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7485/solas_new_saturn_3_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7485/solas_new_saturn_3_rubex_propeller_suzuki.html Solas New Lexor-4 Rubex Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8675/solas_lexor_4_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-8675/solas_lexor_4_rubex_propeller_suzuki.html Solas Lexor-3 Rubex Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The Lexor-3 series is very suitable for high speed planing hulls. The Propeller delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7482/solas_lexor_3_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7482/solas_lexor_3_rubex_propeller_suzuki.html Solas "New" Lexor-3 Plus Rubex Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7484/solas_lexor_3_plus_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7484/solas_lexor_3_plus_rubex_propeller_suzuki.html Solas HR Titan-4 Rubex Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7483/solas_hr_titan_4_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7483/solas_hr_titan_4_rubex_propeller_suzuki.html Mercury Vengeance Stainless Propeller fits 135-300 HP Mercury Outboards... Requires XHS202 (Drop-In Hub Kit) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer V-6 Outboards... Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-7596/mercury_vengeance_propeller.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-7596/mercury_vengeance_propeller.html Mercury Revolution 4 Stainless Propeller fits 135-300 HP Mercury Outboards... Requires XHS202 (Drop-In Hub Kit) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer V-6 Outboards... Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-6332/mercury_revolution_4_propeller.html http://www.getaprop.com/images/products/mer333.JPG http://www.getaprop.com/content-product_info/product_id-6332/mercury_revolution_4_propeller.html Mercury Mirage Plus Stainless Propeller fits 135-300 HP Mercury Outboards... Requires XHS202 (Drop-In Hub Kit) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For outboards 150 hp and up, especially for offshore fishing, bay and sport boats http://www.getaprop.com/content-product_info/product_id-7595/mercury_mirage_plus_propeller.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-7595/mercury_mirage_plus_propeller.html Mercury High Five Outboard Propeller fits 135-300 HP Mercury Outboards... Requires XHS202 (Drop-In Hub Kit) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp. http://www.getaprop.com/content-product_info/product_id-6592/mercury_high_five_propeller.html http://www.getaprop.com/images/products/hi555.JPG http://www.getaprop.com/content-product_info/product_id-6592/mercury_high_five_propeller.html Mercury Enertia Stainless Steel Propeller fits 135-300 HP Mercury Outboards... Requires XHS202 (Drop-In Hub Kit) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-Blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For outboards 150 hp and up, especially for offshore fishing, bay, and sport boats http://www.getaprop.com/content-product_info/product_id-7597/mercury_enertia_propeller.html http://www.getaprop.com/images/products/ENERTIA.JPG http://www.getaprop.com/content-product_info/product_id-7597/mercury_enertia_propeller.html Mercury Enertia Stainless Steel Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Three-Blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For outboards 150 hp and up, especially for offshore fishing, bay, and sport boats http://www.getaprop.com/content-product_info/product_id-9344/mercury_enertia_propeller_suzuki.html http://www.getaprop.com/images/products/ENERTIA.JPG http://www.getaprop.com/content-product_info/product_id-9344/mercury_enertia_propeller_suzuki.html Mercury Mirage Plus Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Three-blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For outboards 150 hp and up, especially for offshore fishing, bay and sport boats http://www.getaprop.com/content-product_info/product_id-9346/mercury_mirage_plus_propeller_suzuki.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-9346/mercury_mirage_plus_propeller_suzuki.html Mercury Revolution 4 Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-9347/mercury_revolution_4_propeller_suzuki.html http://www.getaprop.com/images/products/mer333.JPG http://www.getaprop.com/content-product_info/product_id-9347/mercury_revolution_4_propeller_suzuki.html Mercury Vengeance Stainless Propeller fits 150-300 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase High Polish Finish Requires XHS Hub Kit # 204 (Not Included) DT 150 1986-2003 DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987-1992 DT 200 1986-2000 DF 200 4-Stroke 2004 & Newer DT 225 1986-2003 DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stroke 2007 & Newer Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-9348/mercury_vengeance_propeller_suzuki.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-9348/mercury_vengeance_propeller_suzuki.html Powertech 16" Diameter WBV3 Wide Thruster Series Load Pushing Propeller fits 135-300 HP Mercury Outboards. Powertech WBV3 Mercury Outboard Thruster series propeller is 16 diameter available in 14, 15 and 16 diameter. 3-blade propeller with right-hand rotation, this Powertech prop is a wide blade thruster series designed for load pushing, perfect for pontoons and workboats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9317/powertech_wbv3_propeller_mercury.html http://www.getaprop.com/images/products/GPWBV31.JPG http://www.getaprop.com/content-product_info/product_id-9317/powertech_wbv3_propeller_mercury.html Powertech 15.50" Diameter WBB3 Thruster Series Load Pushing Propeller fits 135-300 HP Mercury Outboards. Powertech WBB3 Mercury Outboard Thruster series Powertech propeller is 15.50 diameter available in 1 pitch increments from 11 to 14. 3-blade in right- or left-hand rotation, this is a wide-blade thruster series designed for load pushing, excellent for pontoon and work boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9318/powertech_wbb3_propeller_mercury.html http://www.getaprop.com/images/products/WBB3.JPG http://www.getaprop.com/content-product_info/product_id-9318/powertech_wbb3_propeller_mercury.html Powertech 15.50" Diameter WBB3 Thruster Series Load Pushing Propeller fits 135-225 HP Honda Outboards. Powertech WBB3 Honda Outboard Thruster series Powertech propeller is 15.50 diameter available in 1 pitch increments from 11 to 14. 3-blade in right- or left-hand rotation, this is a wide-blade thruster series designed for load pushing, excellent for pontoon and work boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9281/powertech_wbb3_propeller_honda.html http://www.getaprop.com/images/products/WBB3.JPG http://www.getaprop.com/content-product_info/product_id-9281/powertech_wbb3_propeller_honda.html Powertech 15.25" Diameter VMX3 Large Diameter Bass Boat-3 Blade Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech VMX3 Mercury Outboard High Performance Bass-Bay Powertech propeller is 15.25 diameter available in one inch pitch increments from 23 thru 27. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. Bass and bay boat propeller, this typically runs best at higher motor elevations. Most similar to the Yamaha V-Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9319/powertech_vmx3_propeller_mercury.html http://www.getaprop.com/images/products/VMX3.JPG http://www.getaprop.com/content-product_info/product_id-9319/powertech_vmx3_propeller_mercury.html Powertech 14.625" Diameter VMS3 Baby Bass-3 Blade Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech VMS3 Mercury Outboard High Performance Bass-Bay Powertech propeller is 14.625 diameter available in 23, 24 or 25 pitch. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. An excellent bass boat propeller, this typically runs best at higher motor elevations. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9320/powertech_vms3_propeller_mercury.html http://www.getaprop.com/images/products/VMS3.JPG http://www.getaprop.com/content-product_info/product_id-9320/powertech_vms3_propeller_mercury.html Powertech 13.75 diameter TRO4 Accelerator Stainless Propeller fits 135-300 HP Mercury Outboards, Similar to Mercury Trophy, OMC Renegade... Powertech TRO4 Mercury Outboard Accelerator Propeller is a constant 13.75 diameter available in 1 pitch increments from 17 to 28. 4-blade with right-hand rotation, this prop has a high rake and sharp radius cup for excellent lift. A small hub can be run over- or through-hub exhaust or sealed with ring. Prefers higher motor elevations, most similar to the Mercury Trophy. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits.. Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9321/powertech_tro4_propeller_mercury.html http://www.getaprop.com/images/products/GPTRO4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9321/powertech_tro4_propeller_mercury.html Powertech 14.25" Diameter SFS4 Baby Offshore Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech SFS4 Mercury Outboard Baby Offshore Four Blade Propeller is 14.25 diameter available in 1 increments 17 to 23. 4-blade in right-hand rotation, the Baby-4 has great performance as an all around propeller for ski boats, I/Os, runabouts and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9322/powertech_sfs4_propeller_mercury.html http://www.getaprop.com/images/products/GPSFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9322/powertech_sfs4_propeller_mercury.html Powertech 14.25" Diameter SFS3 Baby Offshore Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech SFS3 Mercury Outboard Baby Offshore Propeller is 14.25 diameter available in 1 increments 17 to 23. 3-blade in right-hand rotation, the Baby has moderate rake and full tip cup, an excellent all around propeller for ski boats, I/Os and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9323/powertech_sfs3_propeller_mercury.html http://www.getaprop.com/images/products/GPSFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9323/powertech_sfs3_propeller_mercury.html Powertech 14" Diameter SCE4-Semi Cleaver Sternlifting Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech SCE4 Mercury Outboard Semi Cleaver four blade propeller is 14 diameter available in 1 pitch increments from 15 to 21. 4-blade design with right- or left-hand rotation, the Semi-Cleaver has improved sternlift over the SCE3. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9324/powertech_sce4_propeller_mercury.html http://www.getaprop.com/images/products/GPSCE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9324/powertech_sce4_propeller_mercury.html Powertech 14" Diameter SCE3-Semi Cleaver Sternlifting Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech SCE3 Mercury Outboard Semi Cleaver Propeller is a constant 14 diameter available in 1 increments from 15 to 21. 3-blades in right- or left-hand rotation, the geometry leads to sternlifting, easy-to-turn geometry, similar to the Yamaha semi-cleaver series. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9325/powertech_sce3_propeller_mercury.html http://www.getaprop.com/images/products/GPSCE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9325/powertech_sce3_propeller_mercury.html Powertech 14.625" Diameter RKR4 Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech RKR4 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9326/powertech_rkr4_propeller_mercury.html http://www.getaprop.com/images/products/GPRKR4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9326/powertech_rkr4_propeller_mercury.html Powertech 14.625" Diameter RKR3 Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech RKR3 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9327/powertech_rkr3_propeller_mercury.html http://www.getaprop.com/images/products/GPRKR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9327/powertech_rkr3_propeller_mercury.html Powertech 14.25 diameter RAS3 R/Series Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech RAS3 Mercury Outboard R/Series Powertech Propeller is 14.25 diameter, this series is available in pitch increments of 15, 17, 19 and 21. 3-blades, right- or left-handed rotation, this is a great all-around performance propeller with high performance geometry. Termed the R-series, this Powertech prop is similar to the Rapture. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9328/powertech_ras3_propeller_mercury.html http://www.getaprop.com/images/products/GPRAS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9328/powertech_ras3_propeller_mercury.html Powertech 14.25" Diameter PTZ4 Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech PTZ4-14.25" diameter Mercury Outboard Propeller is available in 14"-23" pitch, 4 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC4, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9329/powertech_ptz4_propeller_mercury.html http://www.getaprop.com/images/products/GPPTZ4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9329/powertech_ptz4_propeller_mercury.html Powertech 14.25" Diameter PTZ3 Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech PTZ3 is a 14.25" diameter Mercury Outboard Propeller available in 14"-23" pitch, 3 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC3, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9330/powertech_ptz3_propeller_mercury.html http://www.getaprop.com/images/products/GPPTZ3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9330/powertech_ptz3_propeller_mercury.html Powertech 14.25 diameter PTC4 Lifter series 4 blade Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech PTC4 Mercury Outboard Lifter Propeller is 14.25 diameter available in 1 increments from 14 to 23. 4-blade, this right- or left-hand rotation propeller is high-rake with hardwall cupping, giving better grip and lift than the PTC3. Great hole shot and accelleration for I/Os and smaller twin-engine offshore applications needing grip. Available with the Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9331/powertech_ptc4_propeller_mercury.html http://www.getaprop.com/images/products/GPPTC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9331/powertech_ptc4_propeller_mercury.html Powertech 14.25 diameter PTC3 Lifter series-3 Blade Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech PTC3 Mercury Outboard Lifter series propeller is 14.25 diameter available in 1 increments from 14 to 23. 3-blade right- or left-hand rotation, this Powertech high rake, hardwall cup provides excellent lift and grip in an all-around propeller. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9332/powertech_ptc3_propeller_mercury.html http://www.getaprop.com/images/products/GPPTC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9332/powertech_ptc3_propeller_mercury.html Powertech PFL4-14.50" Diameter Flats-4 Blade Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech PFL4 Mercury Outboard Supercup Propeller is 14.5 diameter available in 1 pitch increments from 15 to 19. 4-blade with right-hand rotation, this Powertech prop has moderate rake and triple cup for extreme motor elevation designed for flats applications. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9333/powertech_pfl4_propeller_mercury.html http://www.getaprop.com/images/products/GPPFL4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9333/powertech_pfl4_propeller_mercury.html Powertech Diameter varies OSS3-SST Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech OSS3 SST Mercury Outboard Stern Lifting Propeller, Diameter varies with pitch, available in 2 increments in 15 to 21. 3-blades with right-hand rotation, this Powertech propeller is the factory equivalent to the OMC SST and Volvo I/O. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9334/powertech_oss3_propeller_mercury.html http://www.getaprop.com/images/products/GPOSS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9334/powertech_oss3_propeller_mercury.html Powertech 15.25 diameter OFX4 Performance Offshore-4 Blade Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech OFX4 Mercury Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 4-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics and better motor elevation capability than the OFX3, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9335/powertech_ofx_4_propeller_mercury.html http://www.getaprop.com/images/products/GPOFX4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9335/powertech_ofx_4_propeller_mercury.html Powertech 15.25 diameter OFX3 Performance Offshore Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech OFX3-Mercury Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 3-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9336/powertech_ofx_3_propeller_mercury.html http://www.getaprop.com/images/products/GPOFX3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9336/powertech_ofx_3_propeller_mercury.html Powertech 15.25 diameter Offshore-4 Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech OFS4-Offshore Mercury Outboard Propeller is 15.25 diameter available in 1 increments from 14 to 30. In right- or left-hand rotation with moderately high rake and full tip cup, this Powertech propeller has excellent lift and grip, good for single- or twin-engine offshore applications and sterndrives. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9337/powertech_ofs4_propeller_mercury.html http://www.getaprop.com/images/products/GPOFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9337/powertech_ofs4_propeller_mercury.html Powertech 15.25 diameter OFS3 Offshore Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech OFS3-Offshore Series Mercury Outboard Propeller is 15.25 diameter available in 1 from 14 to 30. 3-blades with right- or left-hand rotation, this powertech propeller has a moderately high rake and full tip cup for excellent lift and grip. Comparable to the Mercury Mirage or Yamaha SaltWater series. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9338/powertech_ofs3_propeller_mercury.html http://www.getaprop.com/images/products/GPOFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9338/powertech_ofs3_propeller_mercury.html Powertech MQS4-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech MQS4 Mercury Outboard Ski Max Propeller Diameter varies with pitch, available in 1 pitch increments from 15 to 21. 4-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9339/powertech_mqs4_propeller_mercury.html http://www.getaprop.com/images/products/GPMQS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9339/powertech_mqs4_propeller_mercury.html Powertech MQS3-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech MQS3-Mercury Outboard Ski Max Propeller, Diameter varies with pitch, available in 1 pitch increments from 15 to 23. 3-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9340/powertech_mqs3_propeller_mercury.html http://www.getaprop.com/images/products/GPMQS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9340/powertech_mqs3_propeller_mercury.html Powertech Diameter varies ELE4 X/Series Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech ELE4 Mercury Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 4-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9341/powertech_ele4_propeller_mercury.html http://www.getaprop.com/images/products/GPELE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9341/powertech_ele4_propeller_mercury.html Powertech ELE3 X/Series Diameter varies Stainless Propeller fits 135-300 HP Mercury Outboards... Powertech ELE3 Mercury Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 3-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9342/powertech_ele3_propeller_mercury.html http://www.getaprop.com/images/products/GPELE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9342/powertech_ele3_propeller_mercury.html Powertech 15" Diameter CFS4 Coastal Flats 4 Blade Stainless Propeller fits 135-300 HP Mercury Outboards. Powertech CFS4 - 15 diameter Mercury Outboard Propeller is available in 1 pitch increments from 15 to 23. A coastal flats propeller, this Powertech prop has high-aspect-ratio blade geometry, excellent grip, holeshot and motor elevation capability for coastal shallows and flats work. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLM200 Cushion Loc Hub (Included) XHS202 Universal Hub Kit (Optional) 135hp 1987 & Newer 150hp 1978 & Newer 175hp 1978 & Newer 200hp 1978 & Newer 220hp1987-1988 225hp 1980 & Newer 225 HP (Sea Pro/Marathon) All Years 250hp 1994 & Newer 275hp 1990-1994 300hp 1999 & Newer Mercruiser 120-375 HP, Alpha & Bravo One Sterndrives http://www.getaprop.com/content-product_info/product_id-9343/powertech_cfs4_propeller_mercury.html http://www.getaprop.com/images/products/GPCFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9343/powertech_cfs4_propeller_mercury.html Mercury High Five Outboard Propeller fits 135-225 HP Honda Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers Pulls strong and smooth and offers great bow lift and handling, even in rough water. Recommended for motors over 75 hp. http://www.getaprop.com/content-product_info/product_id-9313/mercury_high_five_propeller_honda.html http://www.getaprop.com/images/products/hi555.JPG http://www.getaprop.com/content-product_info/product_id-9313/mercury_high_five_propeller_honda.html Mercury Vengeance Stainless Propeller fits 135-225 HP Honda Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9316/mercury_vengeance_propeller_honda.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-9316/mercury_vengeance_propeller_honda.html Mercury Revolution 4 Stainless Propeller fits 135-225 HP Honda Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-9315/mercury_revolution_4_propeller_honda.html http://www.getaprop.com/images/products/mer333.JPG http://www.getaprop.com/content-product_info/product_id-9315/mercury_revolution_4_propeller_honda.html Mercury Mirage Plus Stainless Propeller fits 135-225 HP Honda Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer Three-blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For motors 150 hp and up, especially for offshore fishing, bay and sport boats http://www.getaprop.com/content-product_info/product_id-9314/mercury_mirage_plus_propeller_honda.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-9314/mercury_mirage_plus_propeller_honda.html Mercury Enertia Stainless Steel Propeller fits 135-225 HP Honda Outboards... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer Three-Blade stainless steel design Large diameter to move larger boats with less effort Improves acceleration and speed on larger boats For motors 150 hp and up, especially for offshore fishing, bay, and sport boats. http://www.getaprop.com/content-product_info/product_id-9312/mercury_enertia_propeller_honda.html http://www.getaprop.com/images/products/ENERTIA.JPG http://www.getaprop.com/content-product_info/product_id-9312/mercury_enertia_propeller_honda.html Mercury Vengeance Stainless Propeller fits 90-300 HP Evinrude & Johnson Outboards... XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives.. http://www.getaprop.com/content-product_info/product_id-9311/mercury_vengeance_propeller_e_j.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-9311/mercury_vengeance_propeller_e_j.html Mercury Revolution 4 Stainless Propeller fits 90-300 HP Evinrude & Johnson Outboards... XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-9310/mercury_revolution_4_propeller_e_j.html http://www.getaprop.com/images/products/mer333.JPG http://www.getaprop.com/content-product_info/product_id-9310/mercury_revolution_4_propeller_e_j.html Mercury Mirage Plus Stainless Propeller fits 90-300 HP Evinrude & Johnson Outboards... XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... Three-blade stainless steel design Large diameter and patented high-output blade geometry to move larger boats with less effort Improves acceleration and top speed on larger high-horsepower boats For motors 150 hp and up, especially for offshore fishing, bay and sport boats http://www.getaprop.com/content-product_info/product_id-9309/mercury_mirage_plus_propeller_e_j.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-9309/mercury_mirage_plus_propeller_e_j.html Mercury High Five Outboard Propeller fits 90-300 HP Evinrude & Johnson Outboards... XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers Pulls strong and smooth and offers great bow lift and handling, even in rough water Recommended for motors over 75 hp. http://www.getaprop.com/content-product_info/product_id-9308/mercury_high_five_propeller_e_j.html http://www.getaprop.com/images/products/hi555.JPG http://www.getaprop.com/content-product_info/product_id-9308/mercury_high_five_propeller_e_j.html Mercury Enertia Stainless Steel Propeller fits 90-300 HP Evinrude-Johnson Outboards... XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... Three-Blade stainless steel design Large diameter to move larger boats with less effort Improves acceleration and speed on larger boats For motors 150 hp and up, especially for offshore fishing, bay, and sport boats. http://www.getaprop.com/content-product_info/product_id-9307/mercury_enertia_propeller_e_j.html http://www.getaprop.com/images/products/ENERTIA.JPG http://www.getaprop.com/content-product_info/product_id-9307/mercury_enertia_propeller_e_j.html Powertech 16" Diameter WBV3 Wide Thruster Series Load Pushing Propeller fits 135-225 HP Honda Outboards. Powertech WBV3 Honda Outboard Thruster series propeller is 16 diameter available in 14, 15 and 16 diameter. 3-blade propeller with right-hand rotation, this Powertech prop is a wide blade thruster series designed for load pushing, perfect for pontoons and workboats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9280/powertech_wbv3_propeller_honda.html http://www.getaprop.com/images/products/GPWBV31.JPG http://www.getaprop.com/content-product_info/product_id-9280/powertech_wbv3_propeller_honda.html Powertech 15.25" Diameter VMX3 Large Diameter Bass Boat-3 Blade Stainless Propeller fits 135-225 HP Honda Outboards. Powertech VMX3 Honda Outboard High Performance Bass-Bay Powertech propeller is 15.25 diameter available in one inch pitch increments from 23 thru 27. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. Bass and bay boat propeller, this typically runs best at higher motor elevations. Most similar to the Yamaha V-Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9282/powertech_vmx3_propeller_honda.html http://www.getaprop.com/images/products/VMX3.JPG http://www.getaprop.com/content-product_info/product_id-9282/powertech_vmx3_propeller_honda.html Powertech 14.625" Diameter VMS3 Baby Bass-3 Blade Stainless Propeller fits 135-225 HP Honda Outboards. Powertech VMS3 Honda Outboard High Performance Bass-Bay Powertech propeller is 14.625 diameter available in 23, 24 or 25 pitch. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. An excellent bass boat propeller, this typically runs best at higher motor elevations. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9283/powertech_vms3_propeller_honda.html http://www.getaprop.com/images/products/VMS3.JPG http://www.getaprop.com/content-product_info/product_id-9283/powertech_vms3_propeller_honda.html Powertech 13.75 diameter TRO4 Accelerator Stainless Propeller fits 135-225 HP Honda Outboards, Similar to Mercury Trophy, OMC Renegade... Powertech TRO4 Honda Outboard Accelerator Propeller is a constant 13.75 diameter available in 1 pitch increments from 17 to 28. 4-blade with right-hand rotation, this prop has a high rake and sharp radius cup for excellent lift. A small hub can be run over- or through-hub exhaust or sealed with ring. Prefers higher motor elevations, most similar to the Mercury Trophy. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits.. Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9284/powertech_tro4_propeller_honda.html http://www.getaprop.com/images/products/GPTRO4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9284/powertech_tro4_propeller_honda.html Powertech 14.25" Diameter SFS4 Baby Offshore Stainless Propeller fits 135-225 HP Honda Outboards. Powertech SFS4 Honda Outboard Baby Offshore Four Blade Propeller is 14.25 diameter available in 1 increments 17 to 23. 4-blade in right-hand rotation, the Baby-4 has great performance as an all around propeller for ski boats, I/Os, runabouts and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9285/powertech_sfs4_propeller_honda.html http://www.getaprop.com/images/products/GPSFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9285/powertech_sfs4_propeller_honda.html Powertech 14.25" Diameter SFS3 Baby Offshore Stainless Propeller fits 135-225 HP Honda Outboards. Powertech SFS3 Honda Outboard Baby Offshore Propeller is 14.25 diameter available in 1 increments 17 to 23. 3-blade in right-hand rotation, the Baby has moderate rake and full tip cup, an excellent all around propeller for ski boats, I/Os and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9286/powertech_sfs3_propeller_honda.html http://www.getaprop.com/images/products/GPSFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9286/powertech_sfs3_propeller_honda.html Powertech 14" Diameter SCE4-Semi Cleaver Sternlifting Stainless Propeller fits 135-225 HP Honda Outboards. Powertech SCE4 Honda Outboard Semi Cleaver four blade propeller is 14 diameter available in 1 pitch increments from 15 to 21. 4-blade design with right- or left-hand rotation, the Semi-Cleaver has improved sternlift over the SCE3. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9287/powertech_sce4_propeller_honda.html http://www.getaprop.com/images/products/GPSCE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9287/powertech_sce4_propeller_honda.html Powertech 14" Diameter SCE3-Semi Cleaver Sternlifting Stainless Propeller fits 135-225 HP Honda Outboards. Powertech SCE3 Honda Outboard Semi Cleaver Propeller is a constant 14 diameter available in 1 increments from 15 to 21. 3-blades in right- or left-hand rotation, the geometry leads to sternlifting, easy-to-turn geometry, similar to the Yamaha semi-cleaver series. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9288/powertech_sce3_propeller_honda.html http://www.getaprop.com/images/products/GPSCE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9288/powertech_sce3_propeller_honda.html Powertech 14.625" Diameter RKR4 Stainless Propeller fits 135-225 HP Honda Outboards. Powertech RKR4 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9289/powertech_rkr4_propeller_honda.html http://www.getaprop.com/images/products/GPRKR4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9289/powertech_rkr4_propeller_honda.html Powertech 14.625" Diameter RKR3 Stainless Propeller fits 135-225 HP Honda Outboards. Powertech RKR3 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9290/powertech_rkr3_propeller_honda.html http://www.getaprop.com/images/products/GPRKR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9290/powertech_rkr3_propeller_honda.html Powertech 14.25 diameter RAS3 R/Series Stainless Propeller fits 135-225 HP Honda Outboards... Powertech RAS3 Honda Outboard R/Series Powertech Propeller is 14.25 diameter, this series is available in pitch increments of 15, 17, 19 and 21. 3-blades, right- or left-handed rotation, this is a great all-around performance propeller with high performance geometry. Termed the R-series, this Powertech prop is similar to the Rapture. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9291/powertech_ras3_propeller_honda.html http://www.getaprop.com/images/products/GPRAS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9291/powertech_ras3_propeller_honda.html Powertech 14.25" Diameter PTZ4 Stainless Propeller fits 135-225 HP Honda Outboards. Powertech PTZ4-14.25" diameter Honda Outboard Propeller is available in 14"-23" pitch, 4 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC4, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9292/powertech_ptz4_propeller_honda.html http://www.getaprop.com/images/products/GPPTZ4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9292/powertech_ptz4_propeller_honda.html Powertech 14.25" Diameter PTZ3 Stainless Propeller fits 135-225 HP Honda Outboards. Powertech PTZ3 is a 14.25" diameter Honda Outboard Propeller available in 14"-23" pitch, 3 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC3, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9293/powertech_ptz3_propeller_honda.html http://www.getaprop.com/images/products/GPPTZ3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9293/powertech_ptz3_propeller_honda.html Powertech 14.25 diameter PTC4 Lifter series 4 blade Stainless Propeller fits 135-225 HP Honda Outboards... Powertech PTC4 Honda Outboard Lifter Propeller is 14.25 diameter available in 1 increments from 14 to 23. 4-blade, this right- or left-hand rotation propeller is high-rake with hardwall cupping, giving better grip and lift than the PTC3. Great hole shot and accelleration for I/Os and smaller twin-engine offshore applications needing grip. Available with the Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9294/powertech_ptc4_propeller_honda.html http://www.getaprop.com/images/products/GPPTC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9294/powertech_ptc4_propeller_honda.html Powertech 14.25 diameter PTC3 Lifter series-3 Blade Stainless Propeller fits 135-225 HP Honda Outboards... Powertech PTC3 Honda Outboard Lifter series propeller is 14.25 diameter available in 1 increments from 14 to 23. 3-blade right- or left-hand rotation, this Powertech high rake, hardwall cup provides excellent lift and grip in an all-around propeller. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9295/powertech_ptc3_propeller_honda.html http://www.getaprop.com/images/products/GPPTC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9295/powertech_ptc3_propeller_honda.html Powertech PFL4-14.50" Diameter Flats-4 Blade Stainless Propeller fits 135-225 HP Honda Outboards. Powertech PFL4 Honda Outboard Supercup Propeller is 14.5 diameter available in 1 pitch increments from 15 to 19. 4-blade with right-hand rotation, this Powertech prop has moderate rake and triple cup for extreme motor elevation designed for flats applications. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9296/powertech_pfl4_propeller_honda.html http://www.getaprop.com/images/products/GPPFL4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9296/powertech_pfl4_propeller_honda.html Powertech Diameter varies OSS3-SST Stainless Propeller fits 135-225 HP Honda Outboards... Powertech OSS3 SST Honda Outboard Stern Lifting Propeller, Diameter varies with pitch, available in 2 increments in 15 to 21. 3-blades with right-hand rotation, this Powertech propeller is the factory equivalent to the OMC SST and Volvo I/O. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9297/powertech_oss3_propeller_honda.html http://www.getaprop.com/images/products/GPOSS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9297/powertech_oss3_propeller_honda.html Powertech 15.25 diameter OFX4 Performance Offshore-4 Blade Stainless Propeller fits 135-225 HP Honda Outboards... Powertech OFX4 Honda Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 4-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics and better motor elevation capability than the OFX3, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9298/powertech_ofx_4_propeller_honda.html http://www.getaprop.com/images/products/GPOFX4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9298/powertech_ofx_4_propeller_honda.html Powertech 15.25 diameter OFX3 Performance Offshore Stainless Propeller fits 135-225 HP Honda Outboards... Powertech OFX3-Honda Outboard High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 3-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9299/powertech_ofx_3_propeller_honda.html http://www.getaprop.com/images/products/GPOFX3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9299/powertech_ofx_3_propeller_honda.html Powertech 15.25 diameter Offshore-4 Stainless Propeller fits 135-225 HP Honda Outboards... Powertech OFS4-Offshore Honda Outboard Propeller is 15.25 diameter available in 1 increments from 14 to 30. In right- or left-hand rotation with moderately high rake and full tip cup, this Powertech propeller has excellent lift and grip, good for single- or twin-engine offshore applications and sterndrives. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9300/powertech_ofs4_propeller_honda.html http://www.getaprop.com/images/products/GPOFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9300/powertech_ofs4_propeller_honda.html Powertech 15.25 diameter OFS3 Offshore Stainless Propeller fits 135-225 HP Honda Outboards... Powertech OFS3-Offshore Series Honda Outboard Propeller is 15.25 diameter available in 1 from 14 to 30. 3-blades with right- or left-hand rotation, this powertech propeller has a moderately high rake and full tip cup for excellent lift and grip. Comparable to the Mercury Mirage or Yamaha SaltWater series. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9301/powertech_ofs3_propeller_honda.html http://www.getaprop.com/images/products/GPOFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9301/powertech_ofs3_propeller_honda.html Powertech MQS4-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 135-225 HP Honda Outboards. Powertech MQS4 Honda Outboard Ski Max Propeller Diameter varies with pitch, available in 1 pitch increments from 15 to 21. 4-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9302/powertech_mqs4_propeller_honda.html http://www.getaprop.com/images/products/GPMQS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9302/powertech_mqs4_propeller_honda.html Powertech MQS3-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 135-225 HP Honda Outboards. Powertech MQS3-Honda Outboard Ski Max Propeller, Diameter varies with pitch, available in 1 pitch increments from 15 to 23. 3-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9303/powertech_mqs3_propeller_honda.html http://www.getaprop.com/images/products/GPMQS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9303/powertech_mqs3_propeller_honda.html Powertech Diameter varies ELE4 X/Series Stainless Propeller fits 135-225 HP Honda Outboards... Powertech ELE4 Honda Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 4-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9304/powertech_ele4_propeller_honda.html http://www.getaprop.com/images/products/GPELE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9304/powertech_ele4_propeller_honda.html Powertech Diameter varies ELE3 X/Series Stainless Propeller fits 135-225 HP Honda Outboards... Powertech ELE3 Honda Outboard Propeller, Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 3-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9305/powertech_ele3_propeller_honda.html http://www.getaprop.com/images/products/GPELE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9305/powertech_ele3_propeller_honda.html Powertech 15" Diameter CFS4 Coastal Flats 4 Blade Stainless Propeller fits 135-225 HP Honda Outboards. Powertech CFS4 - 15 diameter Honda Outboard Propeller is available in 1 pitch increments from 15 to 23. A coastal flats propeller, this Powertech prop has high-aspect-ratio blade geometry, excellent grip, holeshot and motor elevation capability for coastal shallows and flats work. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline 4.75" Gearcase Highly Polished Finish CLH200 Cushion Loc Hub (Included) XHS207 Universal Hub Kit (Optional) BF135 HP 2004 and Newer BF150 HP 2004 and Newer BF200 HP 2002 and Newer BF225 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-9306/powertech_cfs4_propeller_honda.html http://www.getaprop.com/images/products/GPCFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9306/powertech_cfs4_propeller_honda.html Powertech Diameter varies ELE4 X/Series-4 Blade Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Powertech ELE4-Evinrude Johnson Outboard & OMC Cobra Sterndrive X Series Propeller: Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 4-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8728/powertech_ele4_propeller_e_j.html http://www.getaprop.com/images/products/GPELE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-8728/powertech_ele4_propeller_e_j.html Powertech Diameter varies ELE3 X/Series Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Powertech ELE3 Evinrude Johnson Outboard & OMC Cobra Sterndrive X Series Propeller: Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. 3-blades with right-hand rotation, this is PowerTechs extreme value series propeller. Available with the Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8720/powertech_ele3_propeller_e_j.html http://www.getaprop.com/images/products/GPELE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8720/powertech_ele3_propeller_e_j.html Powertech 14.625" Diameter VMS3 Baby Bass-3 Blade Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech VMS3-Evinrude Johnson & OMC Cobra Sterndrive High Performance Bass-Bay Powertech propeller is 14.625 diameter available in 23, 24 or 25 pitch. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. An excellent bass boat propeller, this typically runs best at higher motor elevations. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9278/powertech_vms3_propeller_e_j.html http://www.getaprop.com/images/products/VMS3.JPG http://www.getaprop.com/content-product_info/product_id-9278/powertech_vms3_propeller_e_j.html Powertech 15.25" Diameter VMX3 Large Diameter Bass Boat-3 Blade Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech VMX3 Evinrude Johnson & OMC Cobra Sterndrive High Performance Bass-Bay Powertech propeller is 15.25 diameter available in one inch pitch increments from 23 thru 27. 3-blade in right-hand rotation, this high rake propeller has moderate cup, with excellent bow lift. Bass and bay boat propeller, this typically runs best at higher motor elevations. Most similar to the Yamaha V-Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9277/powertech_vmx3_propeller_e_j.html http://www.getaprop.com/images/products/VMX3.JPG http://www.getaprop.com/content-product_info/product_id-9277/powertech_vmx3_propeller_e_j.html Powertech 16" Diameter WBV3 Wide Thruster Series Load Pushing Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech WBV3 Evinrude Johnson & OMC Cobra Sterndrive Thruster series propeller is 16 diameter available in 14, 15 and 16 diameter. 3-blade propeller with right-hand rotation, this Powertech prop is a wide blade thruster series designed for load pushing, perfect for pontoons and workboats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9276/powertech_wbv3_propeller_e_j.html http://www.getaprop.com/images/products/GPWBV31.JPG http://www.getaprop.com/content-product_info/product_id-9276/powertech_wbv3_propeller_e_j.html Powertech 15.50" Diameter WBB3 Thruster Series Load Pushing Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech WBB3 Evinrude Johnson & OMC Cobra Sterndrive Thruster series Powertech propeller is 15.50 diameter available in 1 pitch increments from 11 to 14. 3-blade in right- or left-hand rotation, this is a wide-blade thruster series designed for load pushing, excellent for pontoon and work boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9275/powertech_wbb3_propeller_e_j.html http://www.getaprop.com/images/products/WBB3.JPG http://www.getaprop.com/content-product_info/product_id-9275/powertech_wbb3_propeller_e_j.html Powertech 14.25" Diameter SFS4 Baby Offshore Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech SFS4 Evinrude Johnson & OMC Cobra Sterndrive Baby Offshore Powertech four blade Propeller is 14.25 diameter available in 1 increments 17 to 23. 4-blade in right-hand rotation, the Baby-4 has great performance as an all around propeller for ski boats, I/Os, runabouts and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9274/powertech_sfs4_propeller_e_j.html http://www.getaprop.com/images/products/GPSFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9274/powertech_sfs4_propeller_e_j.html Powertech 14.25" Diameter SFS3 Baby Offshore Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech SFS3 Evinrude Johnson & OMC Cobra Sterndrive Baby Offshore Powertech Propeller is 14.25 diameter available in 1 increments 17 to 23. 3-blade in right-hand rotation, the Baby has moderate rake and full tip cup, an excellent all around propeller for ski boats, I/Os and small offshores. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9273/powertech_sfs3_propeller_e_j.html http://www.getaprop.com/images/products/GPSFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9273/powertech_sfs3_propeller_e_j.html Powertech 14" Diameter SCE4-Semi Cleaver Sternlifting Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) SCE4-Evinrude Johnson & OMC Cobra Sterndrive Semi Cleaver four blade propeller is 14 diameter available in 1 pitch increments from 15 to 21. 4-blade design with right- or left-hand rotation, the Semi-Cleaver has improved sternlift over the SCE3. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9272/powertech_sce4_propeller_e_j.html http://www.getaprop.com/images/products/GPSCE4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9272/powertech_sce4_propeller_e_j.html Powertech 14" Diameter SCE3-Semi Cleaver Sternlifting Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) SCE3-Evinrude Johnson & OMC Cobra Sterndrive SemiCleaver Powertech Propeller is a constant 14 diameter available in 1 increments from 15 to 21. 3-blades in right- or left-hand rotation, the geometry leads to sternlifting, easy-to-turn geometry, similar to the Yamaha semi-cleaver series. Available with the Powertech Premium Cushion Lok Hub or Square Hub to receive the Vortex/Flo-Torq hub kits... Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9271/powertech_sce3_propeller_e_j.html http://www.getaprop.com/images/products/GPSCE3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9271/powertech_sce3_propeller_e_j.html Powertech 13.75 diameter TRO4 Accelerator Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards, Similar to Mercury Trophy, OMC Renegade... Powertech TRO4 Evinrude Johnson & OMC Cobra Sterndrive Accelerator Powertech propeller is a constant 13.75 diameter available in 1 pitch increments from 17 to 28. 4-blade with right-hand rotation, this prop has a high rake and sharp radius cup for excellent lift. A small hub can be run over- or through-hub exhaust or sealed with ring. Prefers higher motor elevations, most similar to the Mercury Trophy. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits.. Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4775/powertech_tro4_propeller_e_j.html http://www.getaprop.com/images/products/GPTRO4 copy.jpg http://www.getaprop.com/content-product_info/product_id-4775/powertech_tro4_propeller_e_j.html Powertech PFL4-14.50" Diameter Flats-4 Blade Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech PFL4-Evinrude Johnson & OMC Cobra Sterndrive Supercup Propeller is 14.5 diameter available in 1 pitch increments from 15 to 19. 4-blade with right-hand rotation, this Powertech prop has moderate rake and triple cup for extreme motor elevation designed for flats applications. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9270/powertech_pfl4_propeller_e_j.html http://www.getaprop.com/images/products/GPPFL4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9270/powertech_pfl4_propeller_e_j.html Powertech MQS3-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech MQS3-Evinrude Johnson & OMC Cobra Sterndrives Ski Max Propeller: Diameter varies with pitch, available in 1 pitch increments from 15 to 23. 3-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9267/powertech_mqs3_propeller_e_j.html http://www.getaprop.com/images/products/GPMQS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9267/powertech_mqs3_propeller_e_j.html Powertech MQS4-Diameter Varies with Pitch-Sternlifting Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech MQS4-Evinrude Johnson & OMC Cobra Sterndrives Ski Max Propeller: Diameter varies with pitch, available in 1 pitch increments from 15 to 21. 4-blades with right- or left-hand rotation, this powertech low rake sternlifting propeller is the factory equivalent of the Mercury Black Max. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9269/powertech_mqs4_propeller_e_j.html http://www.getaprop.com/images/products/GPMQS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9269/powertech_mqs4_propeller_e_j.html Powertech 15" Diameter CFS4 Coastal Flats 4 Blade Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech CFS4 - 15 diameter Evinrude Johnson Outboard & OMC Cobra Sterndrive Propeller is available in 1 pitch increments from 15 to 23. A coastal flats propeller, this Powertech prop has high-aspect-ratio blade geometry, excellent grip, holeshot and motor elevation capability for coastal shallows and flats work. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9266/powertech_cfs4_propeller_e_j.html http://www.getaprop.com/images/products/GPCFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9266/powertech_cfs4_propeller_e_j.html Powertech 15.25 diameter OFS3 Offshore Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Powertech OFS3-Offshore Series Evinrude Johnson & OMC Cobra Sterndrive Propeller is 15.25 diameter available in 1 from 14 to 30. 3-blades with right- or left-hand rotation, this powertech propeller has a moderately high rake and full tip cup for excellent lift and grip. Comparable to the Mercury Mirage or Yamaha SaltWater series. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4762/powertech_ofs3_propeller_e_j.html http://www.getaprop.com/images/products/GPOFS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-4762/powertech_ofs3_propeller_e_j.html Powertech 15.25 diameter Offshore-4 Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Powertech OFS4-Offshore Evinrude Johnson & OMC Cobra Sterndrive Propeller is 15.25 diameter available in 1 increments from 14 to 30. In right- or left-hand rotation with moderately high rake and full tip cup, this Powertech propeller has excellent lift and grip, good for single- or twin-engine offshore applications and sterndrives. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4790/powertech_ofs4_propeller_e_j.html http://www.getaprop.com/images/products/GPOFS4 copy.jpg http://www.getaprop.com/content-product_info/product_id-4790/powertech_ofs4_propeller_e_j.html Powertech 15.25 diameter OFX3 Performance Offshore Stainless Propeller fits 90-300 HP Evinrude, Johnson Outboards... Powertech OFX3-Evinrude Johnson & OMC Cobra Sterndrive High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 3-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8762/powertech_ofx_3_propeller_e_j.html http://www.getaprop.com/images/products/GPOFX3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8762/powertech_ofx_3_propeller_e_j.html Powertech 15.25 diameter OFX4 Performance Offshore-4 Blade Stainless Propeller fits 90-300 HP Evinrude, Johnson Outboards... Powertech OFX4-Evinrude Johnson & OMC Cobra Sterndrive High Performance Offshore Propeller is 15.25 diameter available in 1 pitch increments from 14 to 30. 4-blades with right- and left-hand rotation, this Powertech propeller has moderately high rake, high aspect ratio X-cut geometry. With aggressive cupping for excellent lift and grip characteristics and better motor elevation capability than the OFX3, this prop is used on many high performance flats, bays and muscle boats. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8763/powertech_ofx_4_propeller_e_j.html http://www.getaprop.com/images/products/GPOFX4 copy.jpg http://www.getaprop.com/content-product_info/product_id-8763/powertech_ofx_4_propeller_e_j.html Powertech Diameter varies OSS3-SST Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Powertech OSS3-SST Evinrude Johnson & OMC Cobra Sterndrive SternLifting Propeller, Diameter varies with pitch, available in 2 increments in 15 to 21. 3-blades with right-hand rotation, this Powertech propeller is the factory equivalent to the OMC SST and Volvo I/O. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-4757/powertech_oss3_propeller_e_j.html http://www.getaprop.com/images/products/GPOSS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-4757/powertech_oss3_propeller_e_j.html Powertech 14.25 diameter PTC3 Lifter series-3 Blade Stainless Propeller fits 150-300 HP Evinrude, Johnson Outboards... Powertech PTC3-Evinrude Johnson & OMC Cobra Sterndrive Lifter series propeller is 14.25 diameter available in 1 increments from 14 to 23. 3-blade right- or left-hand rotation, this Powertech high rake, hardwall cup provides excellent lift and grip in an all-around propeller. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8819/powertech_ptc3_propeller_e_j.html http://www.getaprop.com/images/products/GPPTC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8819/powertech_ptc3_propeller_e_j.html Powertech 14.25 diameter PTC4 Lifter series 4 blade Stainless Propeller fits 150-300 HP Evinrude, Johnson Outboards... Powertech PTC4-Evinrude Johnson & OMC Cobra Sterndrive Lifter Propeller is 14.25 diameter available in 1 increments from 14 to 23. 4-blade, this right- or left-hand rotation propeller is high-rake with hardwall cupping, giving better grip and lift than the PTC3. Great hole shot and accelleration for I/Os and smaller twin-engine offshore applications needing grip. Available with the Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8761/powertech_ptc4_propeller_e_j.html http://www.getaprop.com/images/products/GPPTC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-8761/powertech_ptc4_propeller_e_j.html Powertech 14.25" Diameter PTZ3 Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech PTZ3-14.25" Diameter Powertech props, available in 14"-23" pitch, 3 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC3, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9265/powertech_ptz3_propeller_e_j.html http://www.getaprop.com/images/products/GPPTZ3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9265/powertech_ptz3_propeller_e_j.html Powertech 14.25" Diameter PTZ4 Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra (Non SX Drive) Powertech PTZ4-14.25" Diameter Powertech props, available in 14"-23" pitch, 4 blade, right & left hand rotations, high rake, light cup, better grip & lift than PTC4, great for I/Os and smaller twin-engine offshore applications requiring maximum grip. Available with the Powertech Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional Universal Hub Kits: XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9264/powertech_ptz4_propeller_e_j.html http://www.getaprop.com/images/products/GPPTZ4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9264/powertech_ptz4_propeller_e_j.html Powertech 14.25 diameter RAS3 R/Series Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards... Powertech RAS3 Evinrude Johnson & OMC Cobra Sterndrive R Series Powertech Propeller is 14.25 diameter, this series is available in pitch increments of 15, 17, 19 and 21. 3-blades, right- or left-handed rotation, this is a great all-around performance propeller with high performance geometry. Termed the R-series, this Powertech prop is similar to the Rapture. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-8790/powertech_ras3_propeller_e_j.html http://www.getaprop.com/images/products/GPRAS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8790/powertech_ras3_propeller_e_j.html Powertech 14.625" Diameter RKR4 Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra... Powertech RKR4 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9262/powertech_rkr4_propeller_e_j.html http://www.getaprop.com/images/products/GPRKR4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9262/powertech_rkr4_propeller_e_j.html Powertech 14.625" Diameter RKR3 Stainless Propeller fits 90-300 HP Evinrude-Johnson Outboards, & OMC-800 Cobra/King Cobra... Powertech RKR3 - High Performance Bass & Flats/Bay Boat Propeller, Has a constant 14.625 inch diameter regardless of pitch and available in every inch of pitch from 17-30 . It has a Sq Hub Cavity, polished finish, high rake and sharp radius cup for excellent lift. Similar to OMC/BRP Raker/Renegade & Mercury Fury/Torrent Propeller Familys.NOTE: Pricing does not include hub kit. Factory Cast Port Holes @ 0.710" Optional Mercury PVC Vent Plugs 4-Pack XHS200 1991 & Newer XHS201 1990 & Older XHS204 200 & 225 4-Stroke 2004-2005 15 Tooth Spline Thru Hub Exhaust 4.75" Gearcase Universal Hub System High Polish Finish 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 200 HP 4-Stroke 2004-2005 225 HP 4-Stroke 2004-2005 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 300 HP E-Tec 2009 & Newer 3.0L-8.2L OMC 800-Cobra, King Cobra (Non SX Drive)Sterndrives... http://www.getaprop.com/content-product_info/product_id-9263/powertech_rkr3_propeller_e_j.html http://www.getaprop.com/images/products/GPRKR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9263/powertech_rkr3_propeller_e_j.html Volvo Penta 290 Zinc Anode Kit... V-18 Volvo Penta Outdrive Ring Zinc Anode 852835 Volvo Penta 290 Outdrive Bar Zinc Anode Zinc anodes provide good protection in salt or brackish water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8851/volvo_penta_290_zinc_anode_kit.html http://www.getaprop.com/images/products/VP290.JPG http://www.getaprop.com/content-product_info/product_id-8851/volvo_penta_290_zinc_anode_kit.html Volvo Penta 280 Duo-Prop Zinc Anode Kit... 875821 Volvo Penta DP 280 Outdrive Ring Zinc Anode 832598 Volvo Penta DP 280 Outdrive Bar Zinc Anode Zinc anodes provide good protection in salt water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8844/volvo_280_dp_zinc_anode_kit.html http://www.getaprop.com/images/products/280 DPKIT.JPG http://www.getaprop.com/content-product_info/product_id-8844/volvo_280_dp_zinc_anode_kit.html Volvo Penta 290 Duo-Prop Zinc Anode Kit... 875821 Volvo Penta DP 290 Outdrive Ring Zinc Anode 852835 Volvo Penta DP 290 Outdrive Bar Zinc Anode Zinc anodes provide good protection in salt water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8845/volvo_290_dp_zinc_anode_kit.html http://www.getaprop.com/images/products/290 DPKIT.JPG http://www.getaprop.com/content-product_info/product_id-8845/volvo_290_dp_zinc_anode_kit.html Volvo Penta SX Drive Zinc Anode Kit... 3854130 Volvo Penta SX Gimbal Plate Zinc 3855411 Volvo Penta SX Transom Plate Zinc All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. Aluminum anodes provide good protection in salt or brackish water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8846/volvo_penta_sx_zinc_anode_kit.html http://www.getaprop.com/images/products/SX KIT.JPG http://www.getaprop.com/content-product_info/product_id-8846/volvo_penta_sx_zinc_anode_kit.html Volvo Penta 280 Zinc Anode Kit... V-18 Volvo Penta 250T-280 Outdrive Ring Zinc Anode 832598 Volvo Penta 200-280 Outdrive Bar Zinc Anode Zinc anodes provide good protection in salt water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8850/volvo_penta_280_zinc_anode_kit.html http://www.getaprop.com/images/products/VP280.JPG http://www.getaprop.com/content-product_info/product_id-8850/volvo_penta_280_zinc_anode_kit.html Powertech 13.25" Diameter RED4 Value Line All Purpose Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech RED4 All Purpose Suzuki Outboard Powertech Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 4-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9261/powertech_red4_propeller_suzuki.html http://www.getaprop.com/images/products/GPRED41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9261/powertech_red4_propeller_suzuki.html Powertech 13.25" Diameter RED4 Value Line All Purpose Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech RED4 All Purpose Yamaha Outboard Powertech Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 4-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9215/powertech_red4_propeller_yamaha.html http://www.getaprop.com/images/products/GPRED41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9215/powertech_red4_propeller_yamaha.html Powertech 13.25" Diameter RED4 Value Line All Purpose Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech RED4 All Purpose Mercury Outboard Powertech Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 4-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9239/powertech_red4_propeller_mercury.html http://www.getaprop.com/images/products/GPRED41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9239/powertech_red4_propeller_mercury.html Powertech 14.00" Diameter LNR4-Blade Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech LNR4 Mercury Outboard Propeller is 14 diameter 4-blade available in 1 pitch increments from 18 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter in a 4 blade version, designed for better hole shot and accelleration.... 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9244/powertech_lnr4_propeller_mercury.html http://www.getaprop.com/images/products/GPLNR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9244/powertech_lnr4_propeller_mercury.html Powertech 14.00" Diameter LNR3-Blade Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech LNR3 Mercury Outboard propeller is 14 diameter 3-blade available in 1 pitch increments from 17 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter propeller. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9243/powertech_lnr3_propeller_mercury.html http://www.getaprop.com/images/products/GPLNR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9243/powertech_lnr3_propeller_mercury.html Powertech 13.50" Diameter SWW4-Blade Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech SWW4 Mercury Outboard Super Grip Powertech propeller: 13.5 diameter, available in 1 pitch increments from 12 to 17 4-blade version of the SWW3, this Powertech prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9237/powertech_sww4_propeller_mercury.html http://www.getaprop.com/images/products/GPSWW41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9237/powertech_sww4_propeller_mercury.html Powertech 13.50" Diameter SWW3-Blade Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech SWW3 Mercury Outboard Super Grip propeller is 13.50 diameter and available in 1 pitch increments from 12 to 17. Right hand rotation, this prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9238/powertech_sww3_propeller_mercury.html http://www.getaprop.com/images/products/GPSWW31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9238/powertech_sww3_propeller_mercury.html Powertech 13.50" Diameter PTR4 Bowlifting Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech PTR4-Mercury Outboard Lifter Powertech propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15 to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this Powertech prop is great for high performance applications requiring grip, lift and speed.Equivalent to Laser & Ballistic XL... 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9240/powertech_ptr4_propeller_mercury.html http://www.getaprop.com/images/products/GPPTR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9240/powertech_ptr4_propeller_mercury.html Powertech 13.25" Diameter NRS4- Blade Turbo Series Stainless Propeller fits 40-140hp Mercury Outboards. Powertech NRS4 Mercury Outboard Turbo propeller is a 13.25 diameter propeller available in 1 increments from 14 to 21. Available in right- and left-hand rotation, perfect Flats n Bay prop. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9241/powertech_nrs4_propeller_mercury.html http://www.getaprop.com/images/products/GPNRS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9241/powertech_nrs4_propeller_mercury.html Powertech 14.00" Diameter CFF4 Coastal Flats Stainless Propeller fits 40-140 HP Mercury Outboards... Powertech CFF4 Mercury Outboard Coastal Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 12 thru 19. Specialized coastal flats prop with high aspect ratio blade geometry. This provides excellent grip, holeshot, and motor elevation capability for coastal shallows and flats. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9242/powertech_cff4_propeller_mercury.html http://www.getaprop.com/images/products/GPCFF41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9242/powertech_cff4_propeller_mercury.html Powertech 14.00" Diameter CFF4 Coastal Flats Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech CFF4 Yamaha Outboard Coastal Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 12 thru 19. Specialized coastal flats prop with high aspect ratio blade geometry. This provides excellent grip, holeshot, and motor elevation capability for coastal shallows and flats. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9210/powertech_cff4_propeller_yamaha.html http://www.getaprop.com/images/products/GPCFF41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9210/powertech_cff4_propeller_yamaha.html Powertech 14.00" Diameter CFF4 Coastal Flats Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech CFF4 Suzuki Outboard Coastal Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 12 thru 19. Specialized coastal flats prop with high aspect ratio blade geometry. This provides excellent grip, holeshot, and motor elevation capability for coastal shallows and flats. 4.25" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9223/powertech_cff4_propeller_suzuki.html http://www.getaprop.com/images/products/GPCFF41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9223/powertech_cff4_propeller_suzuki.html Powertech 14.00" Diameter CFF4 Coastal Flats Stainless Propeller fits 75-130 HP Honda Outboards... Powertech CFF4 Honda Outboard Coastal Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 12 thru 19. Specialized coastal flats prop with high aspect ratio blade geometry. This provides excellent grip, holeshot, and motor elevation capability for coastal shallows and flats. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9209/powertech_cff4_propeller_honda.html http://www.getaprop.com/images/products/GPCFF41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9209/powertech_cff4_propeller_honda.html Powertech 14.00" Diameter CFF4 Coastal Flats Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... Powertech CFF4 Evinrude Johnson Coastal Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 12 thru 19. Specialized coastal flats prop with high aspect ratio blade geometry. This provides excellent grip, holeshot, and motor elevation capability for coastal shallows and flats. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2001 & Newer http://www.getaprop.com/content-product_info/product_id-9190/powertech_cff4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPCFF41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9190/powertech_cff4_stainless_propeller_e_j.html Solas Amita Plus 3 blade Aluminum Propeller fits 150-250 HP Suzuki Outboards... Thru-Hub Exhaust 15 Tooth Spline Rubber Hub Bushing DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer DF150-300 All Years Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-9236/solas_amita_plus_propeller_suzuki.html http://www.getaprop.com/images/products/SOAM.jpg http://www.getaprop.com/content-product_info/product_id-9236/solas_amita_plus_propeller_suzuki.html Michigan Match 3 Blade Aluminum Propeller fits 70-140 HP Suzuki Four Stroke Outboards... 15 Tooth Spline 4.25" V4 Gearcase Thru Hub Exhaust, Rubber Hub Bushing DF 70A 4-Stroke 2009 & Newer DF 80A 4-Stroke 2009 & Newer DF 90A 4-Stroke 2009 & Newer DF 90 4-Stroke 2001-2008 DF 100 4-Stroke 2009 & Newer DF 115 4-Stroke 2001 & Newer DF 140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9181/michigan_match_aluminum_propeller_suzuki.html http://www.getaprop.com/images/products/mimatch1.jpg http://www.getaprop.com/content-product_info/product_id-9181/michigan_match_aluminum_propeller_suzuki.html Michigan Match 3 Blade Aluminum Propeller fits 40-140 HP Evinrude/Johnson & Suzuki Outboards... 13 & 15 Tooth Spline 4.25" V4 Gearcase Thru Hub Exhaust, Rubber Hub Bushing 13 Tooth Spline 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 15 Tooth Spline 90 HP (4 Stroke) 2003 and Newer 115 HP (4 Stroke) 2003 and Newer 140 HP (4 Stroke) 2003 and Newer http://www.getaprop.com/content-product_info/product_id-9180/michigan_match_aluminum_propeller_e_j.html http://www.getaprop.com/images/products/mimatch1.jpg http://www.getaprop.com/content-product_info/product_id-9180/michigan_match_aluminum_propeller_e_j.html Michigan Match 3 Blade Aluminum Propeller fits 50-130 HP Yamaha Outboards... 15 Tooth Spline 4.25" Gearcase Thru Hub Exhaust Rubber OEM Hub T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9182/michigan_match_aluminum_propeller_yamaha.html http://www.getaprop.com/images/products/mimatch1.jpg http://www.getaprop.com/content-product_info/product_id-9182/michigan_match_aluminum_propeller_yamaha.html Solas Saturn-3 Blade Stainless Propeller Fits 9.9-30hp Mercury, Mariner & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline OEM Rubber Hub Bushing Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years Tohatsu/Mercury10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7859/solas_saturn_3_propeller_mercury.html http://www.getaprop.com/images/products/saturn[2].jpg http://www.getaprop.com/content-product_info/product_id-7859/solas_saturn_3_propeller_mercury.html Solas Amita-4 Aluminum Propeller Fits 9.9-30 HP Mercury, Mariner & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline OEM Rubber Hub Bushing Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years Tohatsu/Mercury 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7581/solas_amita_4_propeller_mercury.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7581/solas_amita_4_propeller_mercury.html Solas Amita-3 Aluminum Propeller Fits 9.9-30 HP Mercury. Mariner & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline OEM Rubber Hub Bushing Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years Tohatsu/Mercury 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7580/solas_amita_3_propeller_mercury.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7580/solas_amita_3_propeller_mercury.html Quicksilver Black Diamond Aluminum Propeller fits 9.9-30 HP Mercury, Mariner & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline OEM Rubber Hub Bushing Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years Tohatsu/Mercury 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-6171/quicksilver_black_diamond_propeller_mercury.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-6171/quicksilver_black_diamond_propeller_mercury.html Powertech Aluminum Propeller fits 9.9-30hp Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline OEM Rubber Hub Bushing BM Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years BTM Tohatsu/Mercury 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-8828/powertech_aluminum_propeller_mercury.html http://www.getaprop.com/images/products/PT-BH.jpg http://www.getaprop.com/content-product_info/product_id-8828/powertech_aluminum_propeller_mercury.html Powertech SWA3 Multi Use Stainless Propeller fits 6-15 HP Mercury/Mariner Outboards... Thru Hub Exhaust Highly Polished Finish Rubber OEM Hub Bushing M10 8-SPLINE 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 TN15 14-SPLINE 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-5503/powertech_swa3_propeller_mercury.html http://www.getaprop.com/images/products/GPswa3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5503/powertech_swa3_propeller_mercury.html Quicksilver Black Diamond Aluminum Propeller fits 6-15 HP Mercury/Mariner Outboards... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-5320/quicksilver_black_diamond_propeller_mercury.html http://www.getaprop.com/images/products/QA12.jpg http://www.getaprop.com/content-product_info/product_id-5320/quicksilver_black_diamond_propeller_mercury.html Solas Saturn Stainless Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7569/solas_saturn_3_propeller_mercury.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7569/solas_saturn_3_propeller_mercury.html Solas Amita High Thrust-4 Aluminum Propeller fits 6-15 HP Mercury & Mariner Outboards... Excellent choice for Heavy load and Saildrive applications... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7568/solas_high_thrust_4_propeller_mercury.html http://www.getaprop.com/images/products/Untitled.jpg http://www.getaprop.com/content-product_info/product_id-7568/solas_high_thrust_4_propeller_mercury.html Solas Amita-4 Aluminum Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7567/solas_amita_4_propeller_mercury.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7567/solas_amita_4_propeller_mercury.html Solas Amita-Aluminum Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7566/solas_amita_3_propeller_mercury.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7566/solas_amita_3_propeller_mercury.html Powertech SWA4 Multi Use Stainless Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Highly Polished Finish Rubber OEM Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-9092/powertech_swa4_propeller_mercury.html http://www.getaprop.com/images/products/gpswa4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9092/powertech_swa4_propeller_mercury.html Powertech SRT3 Stainless Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Highly Polished Finish Rubber OEM Hub Bushing M10 8-SPLINE 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 TN15 14-SPLINE 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-9094/powertech_srt3_propeller_mercury.html http://www.getaprop.com/images/products/gpsrt3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9094/powertech_srt3_propeller_mercury.html Powertech SRT4 Stainless Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Highly Polished Finish Rubber OEM Hub Bushing M10 8-SPLINE 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 TN15 14-SPLINE 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-9093/powertech_srt4_propeller_mercury.html http://www.getaprop.com/images/products/gpsrt4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9093/powertech_srt4_propeller_mercury.html Michigan Match Aluminum Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-5231/michigan_match_propeller_mercury.html http://www.getaprop.com/images/products/mta.JPG http://www.getaprop.com/content-product_info/product_id-5231/michigan_match_propeller_mercury.html Powertech Aluminum Propeller fits 6-15 HP Mercury & Mariner Outboards... Thru Hub Exhaust Rubber Hub Bushing 8-SPLINE MERCURY & MARINER 6 HP 2-Stroke (Includes Merc 6) 1986-2002 8 HP 2-Stroke (Includes Merc 8) 1986-2005 8 HP 4-Strokes (Not Bigfoot) 1995-2004 9.9 HP 2-Stroke (Includes Merc 9.9) 1986-2005 9.9 HP 4-Stroke (Not Bigfoot) 1995-2004 10 HP 1995 & Newer 10 HP (Sea Pro/Marathon) 1995-2001 15 HP 2-Strokes 1989-2005 15 HP 4-Strokes 1999-2006 15 HP (Sea Pro/Marathon) 1995-2001 14-SPLINE MERCURY 8hp 4-Stroke (Not BigFoot) 2005 & Newer 9.9hp 4-Stroke (Not Bigfoot) 2005 & Newer 9.9,15 HP(Bigfoot/Sail 4-stroke 2005 & Older) uses 18-30hp http://www.getaprop.com/content-product_info/product_id-8694/powertech_aluminum_propeller_mercury.html http://www.getaprop.com/images/products/PTAAM.jpg http://www.getaprop.com/content-product_info/product_id-8694/powertech_aluminum_propeller_mercury.html Solas Amita-4 Aluminum Propeller fits 20-30 HP Yamaha Outboards... 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001 30 HP (Four Stroke) 2001 30 HP 1979 and Newer Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7496/solas_amita_4_propeller_yamaha.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7496/solas_amita_4_propeller_yamaha.html Solas Amita-3 Aluminum Propeller fits 20-30hp Yamaha Outboards... 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001 30 HP (Four Stroke) 2001 30 HP 1979 and Newer Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7495/solas_amita_3_propeller_yamaha.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7495/solas_amita_3_propeller_yamaha.html Power Tech Aluminum Propeller fits 20-30HP Yamaha Outboards... Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001 30 HP (Four Stroke) 2001 30 HP 1979 and Newer http://www.getaprop.com/content-product_info/product_id-8835/power_tech_propeller_yamaha.html http://www.getaprop.com/images/products/PT-BY.jpg http://www.getaprop.com/content-product_info/product_id-8835/power_tech_propeller_yamaha.html Michigan Match Aluminum Propeller fits 20-30HP Yamaha Outboards... Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing 3.25" Gearcase 20 HP 1996-97 25 HP 1980 and Newer F25 HP (Four Stroke) 1998-2006 F25 HP (Four Stroke) 2010 & Newer 30 HP 1979 and 2002 http://www.getaprop.com/content-product_info/product_id-9080/michigan_match_propeller_yamaha.html http://www.getaprop.com/images/products/MWC022002.jpg http://www.getaprop.com/content-product_info/product_id-9080/michigan_match_propeller_yamaha.html Solas Amita-4 Aluminum Propeller fits 25-35hp Nissan Tohatsu Outboards... 25 HP All Years 30 HP All Years Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7373/solas_amita_4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7373/solas_amita_4_propeller_nissan_tohatsu.html Solas Amita-3 Aluminum Propeller fits 25-30hp Nissan Tohatsu Outboards... 25 HP All Years 30 HP All Years Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7372/solas_amita_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7372/solas_amita_3_propeller_nissan_tohatsu.html Power Tech Aluminum Propeller fits 25-30HP Nissan,Tohatsu Outboards... Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline 25 HP All Years 30 HP All Years http://www.getaprop.com/content-product_info/product_id-8831/power_tech_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/PT-BH.jpg http://www.getaprop.com/content-product_info/product_id-8831/power_tech_propeller_nissan_tohatsu.html Solas Amita-3 Aluminum Propeller fits 25-30hp Honda Outboards... 25 HP All Years 30 HP All Years Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7408/solas_amita_3_propeller_honda.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7408/solas_amita_3_propeller_honda.html Solas Amita-4 Aluminum Propeller fits 25-35hp Honda Outboards... 25 HP All Years 30 HP All Years Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7409/solas_amita_4_propeller_honda.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7409/solas_amita_4_propeller_honda.html Solas Amita-4 Aluminum Propeller Fits Evinrude Johnson & Suzuki 20-35hp Outboards... Rubber Hub Bushing Thru Hub Exhaust 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer 10-Spline E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7240/solas_amita_4_propeller_e_j.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7240/solas_amita_4_propeller_e_j.html Solas Amita-3 Aluminum Propeller fits Evinrude Johnson & Suzuki 20-35hp Outboards... Rubber Hub Bushing Thru Hub Exhaust 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer 10-Spline E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7233/solas_amita_3_propeller_e_j.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7233/solas_amita_3_propeller_e_j.html Michigan Match 3 blade Aluminum propeller fits 20 & 35hp Evinrude Johnson Outboards... 3.50" Gearcase Rubber Hub Bushing. Thru Hub Exhaust 14 Tooth Spline 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer NOTE: Not Available for 25-30 hp 4-strokes - Please use Michigan Vortex Propellers. http://www.getaprop.com/content-product_info/product_id-8988/michigan_match_aluminum_propeller_e_j.html http://www.getaprop.com/images/products/MATCH.JPG http://www.getaprop.com/content-product_info/product_id-8988/michigan_match_aluminum_propeller_e_j.html Michigan Wheel Vortex-3 Blade Aluminum Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Requires XHS120 or XHS122 XHS120 10-Spline 9.9HP Bigfoot 1999-2005 15HP Bigfoot 1999-2005 18HP Mercury 1980-1985 20HP Mercury 1986 & Newer 25HP Mercury 2-Stroke 1980 & Newer 25HP Mariner 1985 & Newer 25HP Sea Pro/Marathon All Years XHS122 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-7575/michigan_vortex_propeller_mercury.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-7575/michigan_vortex_propeller_mercury.html Quicksilver Silverado Stainless Propeller fits 40-140 HP Evinrude Johnson & Suzuki Outboards... V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-4707/quicksilver_silverado_propeller_e_j.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-4707/quicksilver_silverado_propeller_e_j.html Powertech-3 Aluminum Propeller fits 40-140 HP Evinrude Johnson Outboards... 13 & 15 Tooth Spline 4.25" V4 Gearcase Thru Hub Exhaust, Rubber Hub Bushing 13 Tooth Spline D-EJ 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 15 Tooth Spline D-S 90,115,140 HP (4 Stroke) 2003 and Newer http://www.getaprop.com/content-product_info/product_id-8810/powertech_aluminum_propeller_e_j.html http://www.getaprop.com/images/products/PT-DEJ.jpg http://www.getaprop.com/content-product_info/product_id-8810/powertech_aluminum_propeller_e_j.html Michigan Vortex-3 "New" Wide Blade Aluminum Propeller fits 40-140HP Evinrude/Johnosn Outboards... 13 & 15 Tooth Spline V4 Gearcase, Thru Hub Exhaust 2 and 4 Stroke XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-7751/michigan_vortex_3_wide_propeller_e_j.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-7751/michigan_vortex_3_wide_propeller_e_j.html Powertech Aluminum Propeller fits 40-140 HP Evinrude Johnson Outboards... 13 & 15 Tooth Spline V4 Gearcase, Thru Hub Exhaust 2 and 4 Stroke XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-8702/powertech_aluminum_propeller_e_j.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8702/powertech_aluminum_propeller_e_j.html Solas Amita-3 Aluminum Rubex Propeller Fits 40-140hp Evinrude Johnson Outboards... 13 & 15 Tooth Spline V4 Gearcase, Thru Hub Exhaust 2 and 4 Stroke XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. Solas aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7283/solas_amita_3_rubex_propeller_e_j.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7283/solas_amita_3_rubex_propeller_e_j.html Solas Amita-4 Aluminum Rubex Propeller Fits 40-140hp Evinrude Johnson Outboards... 13 & 15 Tooth Spline V4 Gearcase, Thru Hub Exhaust 2 and 4 Stroke XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. Solas aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7284/solas_amita_4_rubex_propeller_e_j.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7284/solas_amita_4_rubex_propeller_e_j.html Solas Saturn Stainless Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7226/solas_saturn_3_propeller_e_j.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7226/solas_saturn_3_propeller_e_j.html Solas High Thrust-4 Aluminum Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7224/solas_high_thrust_4_propeller_e_j.html http://www.getaprop.com/images/products/Untitled.jpg http://www.getaprop.com/content-product_info/product_id-7224/solas_high_thrust_4_propeller_e_j.html Solas Amita-4 Aluminum Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline E/J & Suzuki 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline E/J 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7234/solas_amita_4_propeller_e_j.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7234/solas_amita_4_propeller_e_j.html Solas Amita-3 Aluminum Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline E/J & Suzuki 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline E/J 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7214/solas_amita_3_propeller_e_j.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7214/solas_amita_3_propeller_e_j.html Quicksilver Black Diamond Aluminum Propeller fits 9.9 -15 HP Evinrude, Johnson, & Suzuki Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-8259/quicksilver_black_diamond_propeller_e_j.html http://www.getaprop.com/images/products/qass.JPG http://www.getaprop.com/content-product_info/product_id-8259/quicksilver_black_diamond_propeller_e_j.html Powertech 9.25" Diameter SWA4 Multi-Use Stainless Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Powertech SWA4- Semi Weedless Evinrude Johnson propeller: 9.25 diameter, this propeller is available in 9 thru 11 pitch. 4-blades with right hand rotation, this all-purpose semi-weedless prop is easiest to turn, and doesnt load the motor as readily as the SRT3 bladestyle Rubber Hub Bushing Standard Finish is Polish Thru Hub Exhaust 2.50" Gearcase SZ15 - 10 Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer OM15 - 13 Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-9090/powertech_swa4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/gpswa4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9090/powertech_swa4_stainless_propeller_e_j.html Powertech 9.25" Diameter SWA3 Multi-Use Stainless Propeller fits 9.9-15 HP Evinrude Johnson Outboards... SWA3 Evinrude Johnson Semi Weedless boat propeller: 9.25 diameter, this propeller is available in 9 thru 11 pitch. 3-blades with right hand rotation, this all-purpose semi-weedless prop is easiest to turn, and doesnt load the motor as readily as the SRT3 bladestyle. Rubber Hub Bushing Standard Finish is Polish Thru Hub Exhaust 2.50" Gearcase SZ15 - 10 Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer OM15 - 13 Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-4562/powertech_swa3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPswa3 copy.jpg http://www.getaprop.com/content-product_info/product_id-4562/powertech_swa3_stainless_propeller_e_j.html Powertech 9.50" Diameter SRT3 Stainless Propeller fits 9.9-15 HP Evinrude, Johnson, Suzuki Outboards... Powertech SRT3 Evinrude Johnson All Purpose propeller: 9.5 diameter, this Powertech prop is available in pitches from 9" thru 13. 3 blade with right-hand rotation and moderate rake. With more blade surface area than the SWA-blade style, its more suited to higher horsepower applications such as the new 20-horsepower 4-strokes. Also available in a four-blade (SRT-4) model, call for details. High Polish Finish Rubber Hub Bushing. Thru Hub Exhaust 2.50" Gearcase Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase SZ15 - 10 Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer OM15 - 13 Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-4567/powertech_srt3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/gpsrt3 copy.jpg http://www.getaprop.com/content-product_info/product_id-4567/powertech_srt3_stainless_propeller_e_j.html Powertech 9.50" Diameter SRT4 Stainless Propeller fits 9.9-15 HP Evinrude, Johnson, Suzuki Outboards... Powertech SRT4 Evinrude Johnson All Purpose propeller: 9.5 diameter, this prop is available in pitches from 9" thru 11" - 4 blades with right-hand rotation and moderate rake. With more blade surface area than the SWA-blade style, its more suited to higher horsepower applications such as the new 20-horsepower 4-strokes. The 4-blade configuration provides more maneuverability (especially in reverse), improved fuel economy, and smoother overall operation. Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase SZ15 - 10 Spline (E/J & Suzuki) 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer OM15 - 13 Spline (E/J) 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-9091/powertech_srt4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/gpsrt4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9091/powertech_srt4_stainless_propeller_e_j.html Michigan Match Aluminum Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline E/J & Suzuki 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline E/J 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-4542/michigan_match_propeller_e_j.html http://www.getaprop.com/images/products/mta.JPG http://www.getaprop.com/content-product_info/product_id-4542/michigan_match_propeller_e_j.html Power Tech Aluminum Propeller fits 9.9-15 HP Evinrude Johnson Outboards... Rubber Hub Bushing Thru Hub Exhaust 2.50" Gearcase 10 Tooth Spline E/J & Suzuki 9.9HP 4-Stroke 2002 & Newer 15HP 4-Stroke 2002 & Newer 13 Tooth Spline E/J 9.9 HP 2-Strokes 1974-2005 15 HP 2-Strokes 1974-2005 9.9 HP 4-Stroke 1995 and 2001 15 HP 4-Stroke 1995 and 2001 http://www.getaprop.com/content-product_info/product_id-8692/powertech_aluminum_propeller_e_j.html http://www.getaprop.com/images/products/PTAAM.jpg http://www.getaprop.com/content-product_info/product_id-8692/powertech_aluminum_propeller_e_j.html Powertech SRT3 Stainless Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing High Polish Finish 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9102/powertech_srt3_stainless_propeller_yamaha.html http://www.getaprop.com/images/products/gpsrt3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9102/powertech_srt3_stainless_propeller_yamaha.html Solas Saturn-3 Stainless Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing High Polish Finish 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7494/solas_saturn_3_propeller_yamaha.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7494/solas_saturn_3_propeller_yamaha.html Solas High Thrust Aluminum Propeller fits 9.9-20 HP Yamaha Outboards... Excellent choice for Heavy load and Saildrive applications... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7493/solas_high_thrust_4_propeller_yamaha.html http://www.getaprop.com/images/products/p031313sq01[1].jpg http://www.getaprop.com/content-product_info/product_id-7493/solas_high_thrust_4_propeller_yamaha.html Solas Amita-4 Aluminum Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7492/solas_amita_4_propeller_yamaha.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7492/solas_amita_4_propeller_yamaha.html Solas Amita-3 Aluminum Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7491/solas_amita_3_propeller_yamaha.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7491/solas_amita_3_propeller_yamaha.html Quicksilver Black Diamond Aluminum Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5974/quicksilver_black_diamond_propeller_yamaha.html http://www.getaprop.com/images/products/qass[1].jpg http://www.getaprop.com/content-product_info/product_id-5974/quicksilver_black_diamond_propeller_yamaha.html Powertech SWA4 Stainless Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing High Polish Finish 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9101/powertech_swa4_stainless_propeller_yamaha.html http://www.getaprop.com/images/products/gpswa4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9101/powertech_swa4_stainless_propeller_yamaha.html Powertech SWA3 Stainless Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing High Polish Finish 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5856/powertech_swa3_stainless_propeller_yamaha.html http://www.getaprop.com/images/products/GPswa3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5856/powertech_swa3_stainless_propeller_yamaha.html Powertech SRT4 Stainless Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing High Polish Finish 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-9103/powertech_srt4_stainless_propeller_yamaha.html http://www.getaprop.com/images/products/gpsrt4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9103/powertech_srt4_stainless_propeller_yamaha.html Power Tech Aluminum Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-8697/power_tech_propeller_yamaha.html http://www.getaprop.com/images/products/PYAAYH.jpg http://www.getaprop.com/content-product_info/product_id-8697/power_tech_propeller_yamaha.html Michigan Match Aluminum Propeller fits 9.9-20 HP Yamaha Outboards... Thru Hub Exhaust 8 Tooth Spline Rubber Hub Bushing 9.9HP (2 & 4 Stroke) 1984 & Newer 15HP (2 & 4 Stroke) 1984 & Newer F15C 2007 & Newer F20HP 4-Stroke 2007 & Newer http://www.getaprop.com/content-product_info/product_id-5623/michigan_match_propeller_yamaha.html http://www.getaprop.com/images/products/mta[1][1].jpg http://www.getaprop.com/content-product_info/product_id-5623/michigan_match_propeller_yamaha.html Solas New Saturn Propeller Fits Evinrude/Johnson & Suzuki 20-35hp Outboards... Rubber Hub Bushing Thru Hub Exhaust 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer 10-Spline E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7242/solas_new_saturn_3_propeller_e_j.html http://www.getaprop.com/images/products/newsatrw.JPG http://www.getaprop.com/content-product_info/product_id-7242/solas_new_saturn_3_propeller_e_j.html Quicksilver Black Diamond Aluminum Propeller fits 20-35 HP Evinrude Johnson & Suzuki Outboards... Rubber Hub Bushing. Thru Hub Exhaust 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer 10-Spline E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer http://www.getaprop.com/content-product_info/product_id-4589/quicksilver_black_diamond_propeller_e_j.html http://www.getaprop.com/images/products/GAPQA copy.jpg http://www.getaprop.com/content-product_info/product_id-4589/quicksilver_black_diamond_propeller_e_j.html Michigan Wheel Ballistic 3 blade Stainless propeller fits 20-35 HP Evinrude/Johnson/Suzuki Outboards... 3.25" Gearcase Thru Hub Exhaust Rubber OEM Hub Bushing High Luster Finish 14-Spline 2-Stroke E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer 10-Spline 4-Stroke E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8990/michigan_ballistic_propeller.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-8990/michigan_ballistic_propeller.html Michigan Vortex Aluminum Propeller fits 20-35 HP Evinrude Johnson & Suzuki Outboards... XHS118 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer XHS121 10-Spline E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer http://www.getaprop.com/content-product_info/product_id-4570/michigan_vortex_propeller_e_j.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-4570/michigan_vortex_propeller_e_j.html Powertech Aluminum 3 Blade Propeller Fits Evinrude/Johnson/Suzuki 20-35hp Outboards... Rubber Hub Bushing. Thru Hub Exhaust 10-Spline E/J Suzuki 25 HP 4 Stroke 2004 and Newer 30 HP 4 Stroke 2004 and Newer 14-Spline E/J 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-8803/powertech_aluminum_propeller_e_j.html http://www.getaprop.com/images/products/PT-BEJ.jpg http://www.getaprop.com/content-product_info/product_id-8803/powertech_aluminum_propeller_e_j.html Michigan Aluminum Vortex-4 Propeller fits 40-75 HP Evinrude Johnson Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust Requires XHS Hub Kit (Not Included) XHS111 Hub Kit E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 XHS115 Hub Kit E/J-Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 http://www.getaprop.com/content-product_info/product_id-4596/michigan_vortex_4_propeller_ej.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-4596/michigan_vortex_4_propeller_ej.html Quicksilver Black Diamond Aluminum Propeller fits 40-75 HP Evinrude Johnson Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust Requires XHS Hub Kit (Not Included) XHS111 Hub Kit E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 XHS115 Hub Kit E/J Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 http://www.getaprop.com/content-product_info/product_id-4639/quicksilver_black_diamond_propeller_e_j.html http://www.getaprop.com/images/products/GAPQA copy.jpg http://www.getaprop.com/content-product_info/product_id-4639/quicksilver_black_diamond_propeller_e_j.html Solas Saturn Stainless Propeller Fits 40-75 HP Evinrude Johnson Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust 2-Strokes E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 4-Strokes E/J Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7254/solas_saturn_3_propeller_e_j.html http://www.getaprop.com/images/products/saturn[2].jpg http://www.getaprop.com/content-product_info/product_id-7254/solas_saturn_3_propeller_e_j.html Solas Aluminum Amita-3 Propeller fits 40-75hp Evinrude/Johnson Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust 2-Strokes E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 4-Strokes E/J Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7251/solas_amita_3_propeller_e_j.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7251/solas_amita_3_propeller_e_j.html 10.75" Diameter Powertech SWC4 All Purpose-4 Blade Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SWC4 All Purpose Evinrude Johnson Powertech propeller is a great all-around propeller, 10.75 diameter & available in 1 increments from 10 to 15 pitch. 4-blade with right-hand rotation, this Powertech prop has more grip and cavitation resistance than the SWC3, with a hardwall cup, excellent for motor elevation, tunnels, and cavitation-prone applications. Also a good application for pontoons and single-engine catamarans. 3.25" Small Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9147/powertech_swc4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSWC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9147/powertech_swc4_stainless_propeller_e_j.html 10.75" Diameter Powertech SWC3 All Purpose-3 Blade Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SWC3 Evinrude Johnson All Purpose Powertech propeller is a great all-around propeller, 10.75 diameter & available in 1 increments from 10 to 14pitch. 3-blade with right-hand rotation, this Powertech prop has exceptional grip and cavitation resistance with a hardwall cup, motor elevation and tunnel capabilities. Also a good application for pontoons and single-engine catamarans 3.25" Small Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9146/powertech_swc3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSWC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9146/powertech_swc3_stainless_propeller_e_j.html Powertech SRG3 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SRG3 Evinrude Johnson SST Powertech propeller: Diameter varies with pitch from 11.75 to 12.50, available in 1 increments from 11 to 17. This 3-blade right-hand rotation Powertech prop has 20rake and is an excellent all-around propeller, factory equivalent to the OMC SST. 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-4621/powertech_srg3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSRG3 copy.jpg http://www.getaprop.com/content-product_info/product_id-4621/powertech_srg3_stainless_propeller_e_j.html 11.25" Diameter Powertech SRD4 All Purpose-4 Blade Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SRD4 Evinrude Johnson Accelerator Powertech propeller is 11.25 diameter. The Accelerator is a 4-blade design available in right-hand rotation and 1 increments from 11-17 pitch. This is an excellent all-around blade for 50-60 horsepower motors. 3.25" Small Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-4625/powertech_srd4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSRD4 copy.jpg http://www.getaprop.com/content-product_info/product_id-4625/powertech_srd4_stainless_propeller_e_j.html 11.25" Diameter Powertech SRD3 All Purpose-3 Blade Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SRD3- All Purpose Evinrude Johnson Powertech propeller is 11.25 diameter. The SRD3 is available in one-inch increments from 11-17 pitch. A 3-blade, right hand prop, this All Purpose Powertech props has 20 rake. 3.25" Small Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9145/powertech_srd3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSRD3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9145/powertech_srd3_stainless_propeller_e_j.html 10.38" Diameter Powertech SCB4 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SCB4 Johnson Evinrude Accelerator propeller: 10.375 diameter Powertech prop available in 1 increments, 10-17. This 4-blade speed propeller is right-hand rotation, and has excellent sternlift, preferred on inflatables and flat-bottomed hulls. The Powertech 4-blade design provides excellent cornering, holeshot and porpoise control. 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9144/powertech_scb4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSCB4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9144/powertech_scb4_stainless_propeller_e_j.html 10.38" Diameter Powertech SCB3 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SCB3 Evinrude Johnson propeller is a 10.375 diameter Powertech prop available in 1 increments, 10-17. This 3-blade speed propeller is right-hand rotation, and has excellent sternlift, good on inflatables and flat-bottomed hulls. 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9143/powertech_scb3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9143/powertech_scb3_stainless_propeller_e_j.html 11.00" Diameter Powertech SCA3 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech SCA3 Evinrude Johnson propeller: 11 diameter prop, this is a larger diameter version of the SCB, to handle higher horsepower and heavier loads. This Powertech propeller is a 3-blade design with right-hand rotation, available in pitches of 13, 14 and 15. 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes- E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9142/powertech_sca3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSCA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9142/powertech_sca3_stainless_propeller_e_j.html 10.25" Diameter Powertech REB3 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech REB3 All Purpose Evinrude Johnson Powertech propeller is 10.25 diameter. The REB3 is available in pitches from 10 to 17 in 1 increments. 3-blade design with right-hand rotation, this Powertech propeller is the factory equivalent to the Mercury BlackMax. Cupped with a 15&#8304; aft rake, an excellent all-purpose prop for the Evinrude Johnson 20-35 horsepower family. 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes-E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes- E/J Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9141/powertech_reb3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9141/powertech_reb3_stainless_propeller_e_j.html Powertech NREB3 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... NREB3 All Purpose Evinrude Johnson propeller: Diameter is variable from 10.375 to 10.5, available in 11" thru 15 pitch. 3-blade right-hand rotation is a larger diameter version of the REB3 to handle higher horsepower or heavier loads. Diameter Varies with Pitch 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes-E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes-E/J-Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9140/powertech_nreb3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPNREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9140/powertech_nreb3_stainless_propeller_e_j.html 11.25" Diameter Powertech ILC3 Stainless Propeller fits 40-75 HP Evinrude Johnson Outboards... Powertech ILC3 Evinrude Johnson propeller: 11.25 diameter, the ILC Xtreme is available in one inch increments, 11-15. This right-hand rotation 3-blade Powertech prop has no cup, and is best in fully submerged applications. Will not work properly in ventilating conditions. The Xtreme value series is available in Polished Finish only. 3.25" Gearcase Rubber OEM Hub Bushing High Polish Finish OM50 Hub 2-Strokes E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 YS50 Hub 4-Strokes-E/J-Suzuki 40 HP (4 Stroke) 1999 and Newer 50 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9139/powertech_ilc3_stainlesspropeller_e_j.html http://www.getaprop.com/images/products/GPILC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9139/powertech_ilc3_stainlesspropeller_e_j.html Powertech Aluminum Propeller fits 40-75 HP Evinrude Johnson & Suzuki Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust 2-Strokes C-EJ 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 4-Strokes C-S E/J-Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 http://www.getaprop.com/content-product_info/product_id-8808/powertech_aluminum_propeller_ej.html http://www.getaprop.com/images/products/PT-CEJ.jpg http://www.getaprop.com/content-product_info/product_id-8808/powertech_aluminum_propeller_ej.html Michigan Vortex Aluminum Propeller fits 40-75 HP Evinrude Johnson Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust Requires XHS Hub Kit (Not Included) XHS111 Hub Kit E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 XHS115 Hub Kit E/J-Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 http://www.getaprop.com/content-product_info/product_id-4593/michigan_vortex_propeller_ej.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-4593/michigan_vortex_propeller_ej.html Michigan Stainless Apollo-3 Propeller fits 40-75 HP Evinrude Johnson Outboards... 13 Tooth Spline 3.25" Gearcase Thru Hub Exhaust Requires XHS Hub Kit (Not Included) XHS111 Hub Kit E/J 40 HP 2 Cyl. 1984-2005 48 HP 1987-Newer 50 HP 2 Cyl. 1975-2005 55 HP 1976-79 65 HP 2 Cyl. 1980-85 75 HP 3 Cyl 1975-85 Sprint/Formula E 1986-92 XHS115 Hub Kit E/J-Suzuki 40 HP (4 Stroke) 1999-2005 50 HP (4 Stroke) 1999-2005 http://www.getaprop.com/content-product_info/product_id-4607/michigan_apollo_3_propeller_ej.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-4607/michigan_apollo_3_propeller_ej.html Solas New Saturn 3 Blade Stainless Propeller Fits 35-70 HP Nissan Tohatsu Outboards... (Larger Blade Area) Rubber Hub Bushing Thru Hub Exhaust 13 Tooth Spline 35 HP Thru 1984 40 HP 1984 and Newer 50 HP 1987 and Newer 55 HP 1981-88 60 HP 1986-98 70 HP 1981-98 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7380/solas_new_saturn_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/NEW SATURN.JPG http://www.getaprop.com/content-product_info/product_id-7380/solas_new_saturn_3_propeller_nissan_tohatsu.html Solas Amita 4 Blade Aluminum Propeller Fits 35-70 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Thru Hub Exhaust & 13 Tooth Spline 35 HP Thru 1984 40 HP 1984 and Newer 50 HP 1987 and Newer 55 HP 1981-88 60 HP 1986-98 70 HP 1981-98 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7379/solas_amita_4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7379/solas_amita_4_propeller_nissan_tohatsu.html Solas Amita 3 Blade Aluminum Propeller Fits 35-70 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Thru Hub Exhaust & 13 Tooth Spline 35 HP Thru 1984 40 HP 1984 and Newer 50 HP 1987 and Newer 55 HP 1981-88 60 HP 1986-98 70 HP 1981-98 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7378/solas_amita_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7378/solas_amita_3_propeller_nissan_tohatsu.html Quicksilver Black Diamond Aluminum Propeller fits 50-70 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Thru Hub Exhaust 13 Tooth Spilne 50 HP (50C Only) 1987-91 55HP 1981-88 60A 1986 and Newer 70A 1981 and Newer 70B 1981 and Newer All-purpose 3-blade aluminum propeller Inexpensive and easy to repair Recommended for speeds less than 50 MPH and applications less than 250 HP http://www.getaprop.com/content-product_info/product_id-7383/quicksilver_black_diamond_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/QS111[2][1].jpg http://www.getaprop.com/content-product_info/product_id-7383/quicksilver_black_diamond_propeller_nissan_tohatsu.html 10.75" Diameter Powertech SWC4 All Purpose-4 Blade Stainless Propeller fits 35-70 HP Tohatsu Outboards... Powertech SWC4 is a 10.75 diameter available in 1 increments from 10 to 15 pitch. 4-blade with right-hand rotation, this Powertech propeller has more grip and cavitation resistance than the SWC3, with a hardwall cup, excellent for motor elevation, tunnels, and cavitation-prone applications. Also a good application for pontoons and single-engine catamarans. 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish TN40 Hub 13 Spline 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer TN60 Hub 13 Spline 50 HP (C-only) 1987-1991 55HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9226/powertech_swc4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSWC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9226/powertech_swc4_propeller_tohatsu.html 10.75" Diameter Powertech SWC3 All Purpose-3 Blade Stainless Propeller fits 35-70 HP Tohatsu Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish TN40 Hub 13 Spline 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer TN60 Hub 13 Spline 50 HP (C-only) 1987-1991 55HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9227/powertech_swc3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSWC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9227/powertech_swc3_propeller_tohatsu.html 11.25" Diameter Powertech SRD4 All Purpose-4 Blade Stainless Propeller fits 35-70 HP Tohatsu Outboards... Powertech SRD4 is an 11.25 diameter Propeller 4-blade design available in right-hand rotation and 1 increments from 11-17 pitch. This is an excellent all-around blade for 50-60 horsepower Nissan-Tohatsu Outboard motors. 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9228/powertech_srd4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSRD4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9228/powertech_srd4_propeller_tohatsu.html 11.25" Diameter Powertech SRD3 All Purpose-3 Blade Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... Powertech SRD3 - 11.25 diameter, the SRD3 Nissan-Tohatsu Outboard Propeller is available in one-inch increments from 11-17 pitch. A 3-blade, right hand prop, this All Purpose Powertech prop has 20 rake. 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9229/powertech_srd3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSRD3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9229/powertech_srd3_propeller_tohatsu.html 10.38" Diameter Powertech SCB4 Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... Powertech SCB4 - 10.375 diameter - this Nissan-Tohatsu Outboard Propeller is available in 1 increments, 10-17. This 4-blade speed Powertech propeller is right-hand rotation, and has excellent sternlift, preferred on inflatables and flat-bottomed hulls. The 4-blade design provides excellent cornering, holeshot and porpoise control. 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9230/powertech_scb4_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSCB4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9230/powertech_scb4_propeller_tohatsu.html 10.38" Diameter Powertech SCB3 Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... Powertech SCB3 - 10.375 diameter prop available in 1 increments, 10-17. this Honda Outboard Propeller is a 3-blade speed propeller, right-hand rotation, and has excellent sternlift, good on inflatables and flat-bottomed hulls. 3.50" Gearcase 13 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9231/powertech_scb3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9231/powertech_scb3_propeller_tohatsu.html 11.00" Diameter Powertech SCA3 Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... Powertech SCA3 - 11 diameter prop, this Nissan-Tohatsu Outboard Propeller is a larger diameter version of the SCB, to handle higher horsepower and heavier loads. This Powertech propeller is a 3-blade design with right-hand rotation, available in pitches of 13"-15". 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9232/powertech_sca3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSCA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9232/powertech_sca3_propeller_tohatsu.html 10.25" Diameter Powertech REB3 Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... REB3 - 10.25 diameter, this Tohatsu Outboard Propeller is available in pitches from 10 to 17 in 1 increments. 3-blade design with right-hand rotation, this Powertech propeller is the factory equivalent to the Mercury BlackMax. Cupped with a 15&#8304; aft rake, an excellent all-purpose prop for the Suzuki 20-35 horsepower family. 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing 13 Tooth Spline High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9233/powertech_reb3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9233/powertech_reb3_propeller_tohatsu.html Powertech NREB3 Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... Powertech REB3 - 10.25 diameter, this Tohatsu Outboard Propeller is available in pitches from 10 to 17 in 1 increments. 3-blade design with right-hand rotation, this Powertech propeller is the factory equivalent to the Mercury BlackMax. Cupped with a 15&#8304; aft rake, an excellent all-purpose prop for the Suzuki 20-35 horsepower family. 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing 13 Tooth Spline High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9234/powertech_nreb3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPNREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9234/powertech_nreb3_propeller_tohatsu.html 11.25" Diameter Powertech ILC3 Stainless Propeller fits 35-70 HP Nissan/Tohatsu Outboards... Powertech ILC Xtreme is a 11.25 diameter Nissan-Tohatsu Outboard Powertech Propeller, available in one inch increments, 11-15. This right-hand rotation 3-blade prop has no cup, and is best in fully submerged applications. Will not work properly in ventilating conditions. The Xtreme value series is available in Polished Finish only. 3.50" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing 13 Tooth Spline High Polish Finish 13 Tooth Spline TN40 Hub 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer 13 Tooth Spline TN60 Hub 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-9235/powertech_ilc3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPILC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9235/powertech_ilc3_propeller_tohatsu.html 11.50" Diameter Michigan Vortex-4 Blade Aluminum Propeller fits 35-70 HP Nissan Tohatsu Outboards... 3.25" Gearcase Thru Hub Exhaust 13 Tooth Spline USE XHS116 Hub Kit (Not Included) 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer USE XHS112 Hub Kit (Not Included) 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-7376/michigan_vortex_4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-7376/michigan_vortex_4_propeller_nissan_tohatsu.html Michigan Vortex Aluminum Propeller fits 35-70 HP Nissan Tohatsu Outboards... 3.25" Gearcase Thru Hub Exhaust 13 Tooth Spline USE XHS116 Hub Kit (Not Included) 35HP (35B Only) Thru 1984 40HP 1984 and Newer 50HP (All-ecept 50C) 1992 and Newer USE XHS112 Hub Kit (Not Included) 50 HP (C-only) 1987-1991 55 HP 1981-88 60A HP 1986 & Newer 70A HP 1981 & Newer 70B HP 1981 & Newer http://www.getaprop.com/content-product_info/product_id-7375/michigan_vortex_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-7375/michigan_vortex_3_propeller_nissan_tohatsu.html Powertech NREB3 Stainless Propeller fits 35-60 HP Honda Outboards... Factory Equivalent to Mercury Black Max with New Larger Diameter. 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Diameter varies from 10.375 to 10.5 - this Honda Outboard Propeller is available in 11 thru 15 pitch - 3-blade right-hand rotation and is a larger diameter version of the Powertech REB3 to handle higher horsepower or heavier loads. http://www.getaprop.com/content-product_info/product_id-9151/powertech_nreb3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPNREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9151/powertech_nreb3_stainless_propeller_honda.html Powertech Aluminum Propeller fits 35-70HP Nissan Tohatsu Outboards... Rubber Hub Bushing Thru Hub Exhaust & 13 Tooth Spline 35 HP Thru 1984 40 HP 1984 and Newer 50 HP 1987 and Newer 55 HP 1981-and Newer 60 HP 1986-and Newer 70 HP 1981-and Newer http://www.getaprop.com/content-product_info/product_id-8832/powertech_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/PT-CU50-1.jpg http://www.getaprop.com/content-product_info/product_id-8832/powertech_propeller_nissan_tohatsu.html Powertech 14" Diameter WBH3 Hi-Thrust Propeller fits 60-140 HP Evinrude/Johnson Outboards... Powertech WBH3 Evinrude/Johnson Outboard Thruster Series Propeller is a 14 diameter propeller available in 1 increments from 7 to 14. Right-hand rotation, this powertech wide-blade, load pushing prop is the choice for pontoons and workboats. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9225/powertech_wbh3_propeller_e_j.html http://www.getaprop.com/images/products/GPWBH3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9225/powertech_wbh3_propeller_e_j.html Powertech 14.00" Dimeter WBH3 Thruster Series Load Pushing Stainless Propeller fits 75-130 HP Honda Outboards... Powertech WBH3 Honda Outboard Thruster Series Powertech Propeller is a 14 diameter propeller available in 1 increments from 7 to 14. Right-hand rotation, this wide-blade, load pushing Powertech prop is the choice for pontoons and workboats. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9224/powertech_wbh3_propeller_honda.html http://www.getaprop.com/images/products/GPWBH3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9224/powertech_wbh3_propeller_honda.html Solas Titan-3 Stainless Propeller Fits 60-140 HP Suzuki Outboards... Thru Hub Exhaust 13 Spline Rubber Hub Bushing DF-60,70 (Four Stroke) 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7478/solas_titan_3_propeller_suzuki.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7478/solas_titan_3_propeller_suzuki.html Powertech 13.25" Diameter NRS3-Turbo Series Stainless Propeller fits 60-140hp Suzuki Outboards. Powertech NRS3 Suzuki Outboard Turbo propeller is a 13.25 diameter propeller available in 1 pitch increments from 14 to 21. Available in right- or left-hand rotation, 25&#8304; rake with good lift and extensive cup. This propeller is more aggressive than the PowerTech RED styles, and less aggressive than the PTR style. Similar to Turbo & Mercury Laser II. 4.25" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9221/powertech_nrs3_propeller_suzuki.html http://www.getaprop.com/images/products/GPNRS31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9221/powertech_nrs3_propeller_suzuki.html Powertech 13.25" Diameter NRS4- Blade Turbo Series Stainless Propeller fits 60-140hp Suzuki Outboards. Powertech NRS4 Suzuki Outboard Turbo propeller is a 13.25 diameter propeller available in 1 increments from 14 to 21. Available in right- and left-hand rotation, perfect Flats n Bay prop. Similar to Turbo & Mercury Laser II. 4.25" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9222/powertech_nrs4_propeller_suzuki.html http://www.getaprop.com/images/products/GPNRS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9222/powertech_nrs4_propeller_suzuki.html Powertech 13.50" Diameter SWW3-Blade Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech SWW3 Suzuki Outboard Super Grip propeller is 13.50 diameter and available in 1 pitch increments from 12 to 17. Right hand rotation, this prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9219/powertech_sww3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSWW31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9219/powertech_sww3_propeller_suzuki.html Powertech 13.50" Diameter SWW4-Blade Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech SWW4 Suzuki Outboard Super Grip Powertech propeller is 13.50 diameter, available in 1 pitch increments from 12 to 17 4-blade version of the SWW3, this Powertech prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9220/powertech_sww4_propeller_suzuki.html http://www.getaprop.com/images/products/GPSWW41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9220/powertech_sww4_propeller_suzuki.html Powertech 14.00" Diameter LNR4-Blade Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech LNR4 Suzuki Outboard Propeller is a 14.00 diameter 4-blade available in 1 pitch increments from 18 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter propeller. Thru Hub Exhaust 4.25" Gearcase OEM Rubber Hub Bushing High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-9218/powertech_lnr4_propeller_suzuki.html http://www.getaprop.com/images/products/GPLNR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9218/powertech_lnr4_propeller_suzuki.html Powertech 13.50" Diameter SWW3-Blade Stainless Propeller fits 75-130 HP Honda Outboards... Powertech SWW3 Honda Outboard Super Grip propeller is 13.5 diameter and available in 1 pitch increments from 12 to 17. Right hand rotation, this prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9197/powertech_sww3_propeller_honda.html http://www.getaprop.com/images/products/GPSWW31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9197/powertech_sww3_propeller_honda.html Powertech 13.50" Diameter SWW4-Blade Stainless Propeller fits 40-140 HP Evinrude Johnson & Suzuki Outboards... Powertech SWW4 Evinrude Johnson Super Grip Powertech propeller: 13.5 diameter, available in 1 pitch increments from 12 to 17 4-blade version of the SWW3, this Powertech prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9194/powertech_sww4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSWW41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9194/powertech_sww4_stainless_propeller_e_j.html Powertech 13.50" Diameter SWW3-Blade Stainless Propeller fits 40-140 HP Evinrude Johnson & Suzuki Outboards... Powertech SWW3 Evinrude Johnson Super Grip propeller is 13.5 diameter and available in 1 pitch increments from 12 to 17. Right hand rotation, this prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9193/powertech_sww3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPSWW31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9193/powertech_sww3_stainless_propeller_e_j.html Powertech 13.50" Diameter SWW3-Blade Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech SWW3 Yamaha Outboard Super Grip propeller is 13.50 diameter and available in 1 pitch increments from 12 to 17. Right hand rotation, this prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9216/powertech_sww3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSWW31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9216/powertech_sww3_propeller_yamaha.html Powertech 13.50" Diameter SWW4-Blade Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech SWW4 Yamaha Outboard Super Grip Powertech propeller: 13.5 diameter, available in 1 pitch increments from 12 to 17 4-blade version of the SWW3, this Powertech prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9217/powertech_sww4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSWW41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9217/powertech_sww4_propeller_yamaha.html Powertech 13.50" Diameter PTR4 Bowlifting Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech PTR4-Yamaha Outboard Lifter Powertech propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15 to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this Powertech prop is great for high performance applications requiring grip, lift and speed.Equivalent to Laser & Ballistic XL... 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9214/powertech_ptr4_propeller_yamaha.html http://www.getaprop.com/images/products/GPPTR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9214/powertech_ptr4_propeller_yamaha.html Powertech 14.00" Diameter PFO4 Flats 4-Blade Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech PFO4 Yamaha Outboard Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 16 to 20. 4 blades with right-hand rotation, this prop provides greater grip and motor elevation than the PFS4 series. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9213/powertech_pfo4_propeller_yamaha.html http://www.getaprop.com/images/products/GPPFO41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9213/powertech_pfo4_propeller_yamaha.html Powertech 13.25" Diameter NRS4- Blade Turbo Series Stainless Propeller fits 50-130hp Yamaha Outboards. Powertech NRS4 Yamaha Outboard Turbo propeller is a 13.25 diameter propeller available in 1 increments from 14 to 21. Available in right- and left-hand rotation, perfect Flats n Bay prop. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9212/powertech_nrs4_propeller_yamaha.html http://www.getaprop.com/images/products/GPNRS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9212/powertech_nrs4_propeller_yamaha.html Powertech 13.25" Diameter NRS3-Turbo Series Stainless Propeller fits 50-130hp Yamaha Outboards. Powertech NRS3 Yamaha Outboard Turbo propeller is a 13.25 diameter propeller available in 1 pitch increments from 14 to 21. Available in right- or left-hand rotation, 25&#8304; rake with good lift and extensive cup. This propeller is more aggressive than the PowerTech RED styles, and less aggressive than the PTR style. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9211/powertech_nrs3_propeller_yamaha.html http://www.getaprop.com/images/products/GPNRS31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9211/powertech_nrs3_propeller_yamaha.html Powertech 13.25" Diameter RED4 All Purpose Stainless Propeller fits 75-130 HP Honda Outboards... Powertech RED4 All Purpose Honda Outboard propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 4-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller perfect for twin motor applications, similar to Rapture, Ballistic & Stiletto propellers. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9201/powertech_red4_propeller_honda.html http://www.getaprop.com/images/products/GPRED41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9201/powertech_red4_propeller_honda.html Powertech 13.50" Diameter SWW4-Blade Stainless Propeller fits 75-130 HP Honda Outboards... Powertech SWW4 Honda Outboard Super Grip Powertech propeller: 13.5 diameter, available in 1 pitch increments from 12 to 17 4-blade version of the SWW3, this Powertech prop has excellent grip for motor elevation and cavitation-prone applications. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newe http://www.getaprop.com/content-product_info/product_id-9196/powertech_sww4_propeller_honda.html http://www.getaprop.com/images/products/GPSWW41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9196/powertech_sww4_propeller_honda.html Powertech 13.00" Diameter SCD4-Blade Sternlifting Stainless Propeller fits 75-130hp Honda Outboards. Powertech SCD4 Honda Outboard Semi Cleaver propeller: 13 diameter available in 1 pitch increments from 13 to 21. 4-blade with left- or right-hand rotation gives the Semi-Cleaver excellent sternlift and grip. Great porpoise control for transom-mounted bottoms or shallow Vs. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9198/powertech_scd4_propeller_honda.html http://www.getaprop.com/images/products/GPSCD41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9198/powertech_scd4_propeller_honda.html Powertech 13.00" Diameter SCD3-Blade Sternlifting Stainless Propeller fits 75-130hp Honda Outboards. Powertech SCD3 Honda Outboard Semi Cleaver propeller is 13 diameter available in 1 pitch increments from 13 to 21. 3-blade with left or right-hand rotation, the Cleaver is a Sternlifter similar to the Yahama semi-cleaver 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9199/powertech_scd3_propeller_honda.html http://www.getaprop.com/images/products/GPSCD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9199/powertech_scd3_propeller_honda.html Powertech 13.25" Diameter RXB4 Accelerator-4 Stainless Propeller fits 75-130 HP Honda Outboards... Powertech RXB4 Honda Outboard Accelerator propeller: 13.25 diameter available in 1 pitch increments from 12 to 21. 4-blade design, right- or left-hand rotation with a moderate rake and cup, the Accelerator series focuses on holeshot and handling performance, an excellent all-around 4-blade prop. Equivalent to Rogue 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9200/powertech_rxb4_propeller_honda.html http://www.getaprop.com/images/products/gprxb412 copy.jpg http://www.getaprop.com/content-product_info/product_id-9200/powertech_rxb4_propeller_honda.html Powertech 13.25" Diameter RED3 All Purpose Stainless Propeller fits 75-130 HP Honda Outboards... Powertech RED3 All Purpose Honda Outboard propeller: 13.25 diameter available in 1 pitch increments from 12 to 21. 3-blade with right- and left-hand rotation, this Powertech prop has a moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9202/powertech_red3_propeller_honda.html http://www.getaprop.com/images/products/GPRED31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9202/powertech_red3_propeller_honda.html Powertech 14.00" Diameter LNR4-Blade Stainless Propeller fits 75-130 HP Honda Outboards... Powertech LNR4 Honda Outboard Propeller is a 14.00 diameter 4-blade available in 1 pitch increments from 18 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter propeller. 15 Tooth Spline Thru Hub Exhaust 4.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9207/powertech_lnr4_propeller_honda.html http://www.getaprop.com/images/products/GPLNR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9207/powertech_lnr4_propeller_honda.html Powertech 13.50" Diameter PTR4- Blade Bowlifting Stainless Propeller fits 75-130hp Honda Outboards. Powertech PTR4 Honda Outboard Lifter propeller: 13.50 diameter, available in 1 pitch increments from 15 to 23. 4-blade right-hand rotation. The high rake and 4 blades gives this prop greater lift, grip and load-carrying capabilities than the PTR3. Similar to Laser & Ballistic XL... 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9203/powertech_ptr4_propeller_honda.html http://www.getaprop.com/images/products/GPPTR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9203/powertech_ptr4_propeller_honda.html Powertech 13.50" Diameter PTR3- Blade Bowlifting Stainless Propeller fits 75-130hp Honda Outboards. Powertech PTR3 Honda Outboard Lifter propeller: 13.50 diameter available in 1 pitch increments from 15 to 23, 3-blade right- or left-hand rotation. With high rake and excellent lift, this propeller is great for high performance applications requiring grip, lift and speed. Similar to Laser & Ballistic XL... 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9204/powertech_ptr3_propeller_honda.html http://www.getaprop.com/images/products/GPPTR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9204/powertech_ptr3_propeller_honda.html Powertech 13.25" Diameter NRS4- Blade Turbo Series Stainless Propeller fits 75-130hp Honda Outboards. Powertech NRS4 Honda Outboard Turbo propeller: 13.25 diameter propeller available in 1 increments from 14 to 21. Available in right- and left-hand rotation, perfect Flats n Bay prop. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9205/powertech_nrs4_propeller_honda.html http://www.getaprop.com/images/products/GPNRS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9205/powertech_nrs4_propeller_honda.html Powertech 14.00" Diameter LNR3-Blade Stainless Propeller fits 75-130 HP Honda Outboards... Powertech LNR3 Honda Outboard Propeller is a 14.00 diameter 3-blade available in 1 pitch increments from 17 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter propeller. 15 Tooth Spline Thru Hub Exhaust 4.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9208/powertech_lnr3_propeller_honda.html http://www.getaprop.com/images/products/GPLNR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9208/powertech_lnr3_propeller_honda.html Powertech 13.25" Diameter NRS3-Turbo Series Stainless Propeller fits 75-130hp Honda Outboards. Powertech NRS3 Honda Outboard Turbo propeller: 13.25 diameter propeller available in 1 pitch increments from 14 to 21. Available in right- or left-hand rotation, 25&#8304; rake with good lift and extensive cup. This propeller is more aggressive than the PowerTech RED styles, and less aggressive than the PTR style. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-9206/powertech_nrs3_propeller_honda.html http://www.getaprop.com/images/products/GPNRS31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9206/powertech_nrs3_propeller_honda.html Powertech WBH3 Thruster Series Load Pushing Propellers fits 40-140 HP Mercury Outboards... Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech WBH3 Mercury Outboard Thruster Series Propeller is a 14.00 diameter propeller available in 1 increments from 7 to 14. Right-hand rotation, this wide-blade, load pushing powertech prop is the choice for pontoons and workboats. http://www.getaprop.com/content-product_info/product_id-5572/powertech_wbh3_propeller_mercury.html http://www.getaprop.com/images/products/GPWBH3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5572/powertech_wbh3_propeller_mercury.html Powertech RXB4 Cupped Accelerator-4 Propeller fits 40-140 HP Mercury Outboards... Holeshot/Handling Propellers (Reduce 1-2" Pitch) Thru Hub Exhaust & 15 Tooth Spline Rubber OEM Hub Included Standard Finish is Polish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech RXB4 Mercury Outboard Accelerator Propeller is a 13.25 diameter Propeller available in 1 pitch increments from 12 to 21. 4-blade design, right or left-hand rotation with a moderate rake and cup, the Accelerator series Propeller focuses on holeshot and handling performance, an excellent all-around 4-blade prop. http://www.getaprop.com/content-product_info/product_id-5590/powertech_rxb4_propeller_mercury.html http://www.getaprop.com/images/products/gprxb412 copy.jpg http://www.getaprop.com/content-product_info/product_id-5590/powertech_rxb4_propeller_mercury.html Powertech 13.25" Diameter RXB4 Accelerator-4 Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... Powertech RXB4 Evinrude Johnson Accelerator propeller: 13.25 diameter available in 1 pitch increments from 12 to 21. 4-blade design, right- or left-hand rotation with a moderate rake and cup, the Accelerator series focuses on holeshot and handling performance, an excellent all-around 4-blade prop. Equivalent to Rogue 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2001 & Newer http://www.getaprop.com/content-product_info/product_id-4688/powertech_rxb4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/gprxb412 copy.jpg http://www.getaprop.com/content-product_info/product_id-4688/powertech_rxb4_stainless_propeller_e_j.html Powertech 13.25" Diameter RXB4-Accelerator Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech RXB4 Yamaha Outboard Accelerator Powertech Propeller is a 13.25 diameter Prop available in 1 pitch increments from 12 to 21. 4-blade design, right or left-hand rotation with a moderate rake and cup, the Accelerator series Powertech Prop focuses on holeshot and handling performance, an excellent all-around 4-blade prop. Holeshot/Handling Propellers (Reduce 1-2" Pitch) D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-6032/powertech_rxb4_propeller_yamaha.html http://www.getaprop.com/images/products/gprxb412 copy.jpg http://www.getaprop.com/content-product_info/product_id-6032/powertech_rxb4_propeller_yamaha.html Powertech 13.25" Diameter RXB4 Accelerator Propeller fits 60-140 HP Suzuki Outboards.. Powertech RXB4 Suzuki Outboard Accelerator Propeller is a 13.25 diameter Prop available in 1 pitch increments from 12 to 21. 4-blade design, right or left-hand rotation with a moderate rake and cup, the Accelerator series Propeller focuses on holeshot and handling performance, an excellent all-around 4-blade prop. 4.25" Gearcase Rubber OEM Hub Included High Polish Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5771/powertech_rxb4_propeller_suzuki.html http://www.getaprop.com/images/products/gprxb412 copy.jpg http://www.getaprop.com/content-product_info/product_id-5771/powertech_rxb4_propeller_suzuki.html Powertech RED3 All-Purpose Propellers fits 40-140 HP Mercury Outboards... Equivalent to Rapture, Ballistic & Stilletto Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Bushing Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech RED3 All Purpose Mercury-Mariner Outboard Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 3-blade with right- and left-hand rotation, this prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. http://www.getaprop.com/content-product_info/product_id-5577/powertech_red3_propeller_mercury.html http://www.getaprop.com/images/products/GPRED31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5577/powertech_red3_propeller_mercury.html Powertech 13.25" Diameter RED3 All Purpose Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... Powertech RED3 All Purpose Evinrude Johnson propeller: 13.25 diameter available in 1 pitch increments from 12 to 21. 3-blade with right- and left-hand rotation, this Powertech prop has a moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-4676/powertech_red3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPRED31 copy.jpg http://www.getaprop.com/content-product_info/product_id-4676/powertech_red3_stainless_propeller_e_j.html Powertech 13.25" Diameter RED3 Value Line All Purpose Stainless Propeller fits 50-130 HP Yamaha Outboards... RED3 All Purpose Yamaha Outboard Powertech Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 3-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-5910/powertech_red3_propeller_yamaha.html http://www.getaprop.com/images/products/GPRED31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5910/powertech_red3_propeller_yamaha.html Powertech 13.25" Diameter RED3 All Purpose Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech RED3 All Purpose Suzuki Outboard Propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 3-blade with right- and left-hand rotation, this prop has moderate rake and cup. A great all-purpose propeller, similar to Rapture, Ballistic and Stiletto propellers. 4.25" Gearcase Rubber OEM Hub Bushing Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5760/powertech_red3_propeller_suzuki.html http://www.getaprop.com/images/products/GPRED31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5760/powertech_red3_propeller_suzuki.html Powertech 14.00" Diameter PFO4 Flats Supercup Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech PFO4 Suzuki Outboard Flats propeller is a 14.00 diameter propeller available in 1 pitch increments from 16 to 20. 4 blades with right-hand rotation, this powertech prop provides greater grip and motor elevation than the PFS4 series. 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-8235/powertech_pfo4_propeller_suzuki.html http://www.getaprop.com/images/products/GPPFO41 copy.jpg http://www.getaprop.com/content-product_info/product_id-8235/powertech_pfo4_propeller_suzuki.html Powertech 14.00" Diameter PFO4 Flats 4-Blade Stainless Propeller fits 40-140 HP Evinrude Johnson & Suzuki Outboards... Powertech PFO4 Evinrude Johnson Flats propeller: 14 diameter propeller available in 1 pitch increments from 16 to 20. 4 blades with right-hand rotation, this prop provides greater grip and motor elevation than the PFS4 series. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-7564/powertech_pfo4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPPFO41 copy.jpg http://www.getaprop.com/content-product_info/product_id-7564/powertech_pfo4_stainless_propeller_e_j.html Powertech 13.25" Diameter RAF3 R/Series Stainless Propellers fits Suzuki 60-140hp Outboards... Powertech RAF3 13.25 diameter, Suzuki Outboard Propeller is available in 2 pitch increments from 13 to 21. 3-blade design available in right- or left-hand rotation, the R-series (similar to Rapture & Turbo) has 25&#8304; rake, good lift, extensive cup and great all-around performance, available in High Polish finish only. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... 4.25" Gearcase Thru Hub Exhaust Standard Finish Is Polish XHS110 Hub Kit (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989-2000 DT-115,140 1981 & Newer XHS125 Hub Kit (15 Tooth Spline) DF-70,80,100 2009 & Newer DF-90,115 2001 & Newer XHS126 Hub Kit (15 Tooth Spline) DF-140 2002 & Newer XHS227 Hub Kit (15 Tooth Spline) DF-70A/80A/90A 2009 & Newer http://www.getaprop.com/content-product_info/product_id-8764/powertech_raf3_propeller_suzuki.html http://www.getaprop.com/images/products/GPRAF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8764/powertech_raf3_propeller_suzuki.html Powertech RAF3 R/Series Propellers fits 40-140hp Mercury Outboards... Similar to Rapture, Turbo & Mercury Laser II. Universal Fitment Propeller 4.25" Gearcase 15 Tooth Spline Thru Hub Exhaust High Polish Finish Standard Hub Types: UHS Universal Hub System RPM GUIDE Mercury Outboard Mercury Four Stroke 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech RAF3 is 13.25 diameter, Mercury-Mariner Outboard Propeller is available in 2 pitch increments from 14 to 21. 3-blade design available in right- or left-hand rotation, the powertech R-series (similar to Rapture & Turbo) has 25&#8304; rake, good lift, extensive cup and great all-around performance. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... http://www.getaprop.com/content-product_info/product_id-8255/powertech_raf3_propeller_mercury.html http://www.getaprop.com/images/products/GPRAF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8255/powertech_raf3_propeller_mercury.html Powertech RAF3 R/Series Propellers fits Honda 75-130hp Outboards... Equivalent to Rapture, Ballistic & Stilletto Thru Hub Exhaust & 15 Tooth Spline Standard Finish Is Polish Optional XHS Hub Kit 102 75-90 HP 1995-98 Optional XHS Hub Kit 107 75,90,115,130 HP 1999 & Newer. 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-8767/powertech_raf3_propeller_honda.html http://www.getaprop.com/images/products/GPRAF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8767/powertech_raf3_propeller_honda.html PowerTech 13.25" Diameter RAF3 R/Series Propellers fits Evinrude Johnson 40-140hp Outboards... Equivalent to Rapture, Ballistic & Stilletto V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-8768/powertech_raf3_r_series_propeller_e_j.html http://www.getaprop.com/images/products/GPRAF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8768/powertech_raf3_r_series_propeller_e_j.html Powertech 13.25" Diameter R/Series Propellers fits Yamaha 50-130hp Outboards... Powertech RAF3 Yamaha Outboard Powertech Propeller is available in 2 pitch increments from 13 to 21. 3-blade design available in right- or left-hand rotation, the R-series (similar to Rapture & Turbo) has 25&#8304; rake, good lift, extensive cup and great all-around performance, available in High Polish finish only. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust XHS108 Hub Kit T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer XHS103 Hub Kit 115 HP 1984 and Newer 130 HP 1984 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8765/powertech_raf3_propeller_yamaha.html http://www.getaprop.com/images/products/GPRAF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8765/powertech_raf3_propeller_yamaha.html Powertech ELD3 X/Series Propellers fits Yamaha 50-130hp Outboards... Powertech ELD3-blade Xtreme value series. Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. Right-hand rotation with moderate rake and light cupping. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits - Equivalent to Michigan Apollo. D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust XHS108 Hub Kit T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer XHS103 Hub Kit 115 HP 1984 and Newer 130 HP 1984 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8774/powertech_eld3_propeller_yamaha.html http://www.getaprop.com/images/products/GPELD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8774/powertech_eld3_propeller_yamaha.html Powertech ELD3 X/Series Stainless Propellers fit Suzuki 60-140hp Outboards... Powertech ELD3 Xtreme value series. Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. Right-hand rotation with moderate rake and light cupping, available in High Polish finish only & Square Hub design to receive the Vortex/Flo-Torq hub kits. Similer to Apollo series Propellers... 4.25" Gearcase Thru Hub Exhaust Standard Finish Is Polish XHS110 Hub Kit (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989-2000 DT-115,140 1981 & Newer XHS125 Hub Kit (15 Tooth Spline) DF-70,80,100, 2009 & Newer DF-90,100,115 2001 & Newer XHS126 Hub Kit (15 Tooth Spline) DF-140 2002 & Newer XHS227 Hub Kit (15 Tooth Spline) DF-70A/80A/90A 2009 & Newer http://www.getaprop.com/content-product_info/product_id-8773/powertech_eld3_propeller_suzuki.html http://www.getaprop.com/images/products/GPELD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8773/powertech_eld3_propeller_suzuki.html Powertech ELD3 X/Series Propellers fits Mercury 40-140hp Outboards... Equivalent to Michigan Apollo Thru Hub Exhaust & 15 Tooth Spline Optional XHS 102 Hub Kit Standard High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech Xtreme Value Series - Diameter varies with pitch, available in 15, 17, 19 and 21 pitch. Right-hand rotation with moderate rake and light cupping, available in High Polish finish only. Available with the Square Hub design to receive the Vortex/Flo-Torq hub kits... http://www.getaprop.com/content-product_info/product_id-8771/powertech_eld3_propeller_mercury.html http://www.getaprop.com/images/products/GPELD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8771/powertech_eld3_propeller_mercury.html Powertech ELD3 X/Series Propellers fits Honda 75-130hp Outboards... Equivalent to Michigan Apollo Thru Hub Exhaust & 15 Tooth Spline Standard Finish Is Polish Optional XHS Hub Kit 102 75-90 HP 1995-98 Optional XHS Hub Kit 107 75,90,115,130 HP 1999 & Newer. 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-8770/powertech_eld3_propeller_honda.html http://www.getaprop.com/images/products/GPELD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8770/powertech_eld3_propeller_honda.html Powertech ELD3 X/Series Stainless Propellers fits Evinrude Johnson 40-140hp Outboards... Equivalent to Michigan Apollo V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-8769/powertech_eld3_propeller_e_j.html http://www.getaprop.com/images/products/GPELD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8769/powertech_eld3_propeller_e_j.html Powertech 14.00" Diameter OSN3 "New Style" Swept Blade Stainless Propeller fits 85-140 HP Evinrude Johnson Outboards... Powertech OSN3 Evinrude Johnson SST-type propeller: 14 diameter propeller available in 1 pitch increments from 15 to 21. 3-blade with right-hand rotation, blade design is a swept blade with a narrow tip. This is the factory equivalent for newer OMC SST-style propeller. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-4682/powertech_osn3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPOSN31 copy.jpg http://www.getaprop.com/content-product_info/product_id-4682/powertech_osn3_stainless_propeller_e_j.html Powertech 14.00" Diameter OSN3-Blade SST type Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech OSN3-Suzuki Outboard SST-type propeller is a 14.00 diameter propeller available in 1 pitch increments from 15 to 21. 3-blade with right-hand rotation, blade design is a swept blade with a narrow tip. This is the factory equivalent for newer OMC SST-style propeller 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5793/powertech_osn3_propeller_suzuki.html http://www.getaprop.com/images/products/GPOSN31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5793/powertech_osn3_propeller_suzuki.html Powertech 14.00" Diameter OSN4 SST type Stainless Propeller fits 90-140 HP Suzuki Outboards... Powertech OSN4-Suzuki Outboard OMC-SST-Type 4 Blade Propeller is a 14.00 diameter propeller available in 1 pitch increments from 15 to 21. 4-blade with right-hand rotation, blade design is a swept blade with a narrow tip. This is the factory equivalent for newer OMC SST-style propeller. 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5797/powertech_osn4_propeller_suzuki.html http://www.getaprop.com/images/products/GPOSN41 copy.jpg http://www.getaprop.com/content-product_info/product_id-5797/powertech_osn4_propeller_suzuki.html Powertech 14.00" Diameter OSN4 "New Style" Swept 4-Blade Stainless Propeller fits 40-140 HP Evinrude Johnson, Suzuki Outboards... Powertech OSN4 Evinrude Johnson SST-type propeller: 14 diameter propeller available in 1 pitch increments from 15 to 21. 4-blade with right-hand rotation, blade design is a swept blade with a narrow tip. This is the factory equivalent for newer OMC SST-style propeller. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish RPM GUIDE Evinrude Outboard Johnson Outboard Evinrude E-TEC Outboard OMC Sterndrive OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-4697/powertech_osn4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPOSN41 copy.jpg http://www.getaprop.com/content-product_info/product_id-4697/powertech_osn4_stainless_propeller_e_j.html Powertech MQF3 Sternlifter Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech MQF3-Yamaha Outboard Sternlifter Powertech Propeller is a 13.75 to 13.00" diameter propeller available in 13 and 15 pitch. 3-blade with right-hand rotation, this propeller is the factory equivalent of the Mercury Black Max. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8871/powertech_mfq3_propeller_yamaha.html http://www.getaprop.com/images/products/GPMQF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8871/powertech_mfq3_propeller_yamaha.html Powertech MQF3 Cupped Sternlifter Propeller fits 40-140 HP Mercury Outboards... Equivalent to a Black Max. Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech MQF3-Mercury Outboard Sternlifter Propeller: 13.75 diameter propeller available in 13 and 15 pitch. 3-blade with right-hand rotation, this propeller is the factory equivalent of the Mercury Black Max. http://www.getaprop.com/content-product_info/product_id-5585/powertech_mqf3_propeller_mercury.html http://www.getaprop.com/images/products/GPMQF31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5585/powertech_mqf3_propeller_mercury.html Powertech 13.00" Diameter PFS4-Blade Flats Supercup Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech PFS4 Yamaha Outboard Flats Supercup propeller is a 13 diameter propeller available in 1 increments from 12 to 17. 4-blade with right-hand rotation, the triple-cupped Flats Supercup is designed for extreme motor elevation. If replacing an all-purpose propeller, reduce pitch 3 to 4. D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8185/powertech_pfs4_propeller_yamaha.html http://www.getaprop.com/images/products/GPPFS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-8185/powertech_pfs4_propeller_yamaha.html Powertech 13.00" Diameter PFS4 Flats Supercup Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech PFS4 Suzuki Outboard Flats Supercup propeller is a 13 diameter propeller available in 1 increments from 12 to 17. 4-blade with right-hand rotation, the powertech triple-cupped Flats Supercup is designed for extreme motor elevation. If replacing an all-purpose propeller, reduce pitch 3 to 4. 4.25" Gearcase Rubber OEM Hub Bushing Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5779/powertech_pfs4_propeller_suzuki.html http://www.getaprop.com/images/products/GPPFS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-5779/powertech_pfs4_propeller_suzuki.html Powertech PFS4 Cupped Flats SuperCup Propeller fits 40-140 HP Mercury Outboards... For Extreme Motor Elevation (Reduce Pitch 3-4") Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 PFS4 Mercury-Mariner Outboard Flats Supercup propeller is a 13 diameter propeller available in 1 increments from 12 to 17. 4-blade with right-hand rotation, the powertech triple-cupped Flats Supercup is designed for extreme motor elevation. If replacing an all-purpose propeller, reduce pitch 3 to 4. http://www.getaprop.com/content-product_info/product_id-5596/powertech_pfs4_propeller_mercury.html http://www.getaprop.com/images/products/GPPFS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-5596/powertech_pfs4_propeller_mercury.html Powertech NRS3 Flats and Bay Propeller fits 40-140 HP Mercury Outboards... Similar to Turbo Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Bushing Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech NRS3-Mercury Outboard Turbo Type Propeller is 13.25 diameter available in 1 pitch increments from 14 to 21. Available in right or left-hand rotation, 25&#8304; rake with good lift and extensive cup. This propeller is more aggressive than the PowerTech RED styles, and less aggressive than the PTR style. http://www.getaprop.com/content-product_info/product_id-8889/powertech_nrs3_propeller_mercury.html http://www.getaprop.com/images/products/GPNRS31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8889/powertech_nrs3_propeller_mercury.html Powertech 13.25" Diameter NRS3-Turbo Series Stainless Propeller fits 40-140hp Evinrude-Johnson Outboard & OMC Cobra 400 Sterndrives... Powertech NRS3 Evinrude Johnson Turbo propeller: 13.25 diameter propeller available in 1 pitch increments from 14 to 21. Available in right- or left-hand rotation, 25&#8304; rake with good lift and extensive cup. This propeller is more aggressive than the PowerTech RED styles, and less aggressive than the PTR style. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9185/powertech_nrs3_propeller_e_j.html http://www.getaprop.com/images/products/GPNRS31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9185/powertech_nrs3_propeller_e_j.html Powertech 13.50" Diameter Bowlifting Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech PTR3-Yamaha Outboard Lifter Powertech propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15 to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this Powertech prop is great for high performance applications requiring grip, lift and speed.Equivalent to Laser & Ballistic XL... D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-6023/powertech_ptr3_propeller_yamaha.html http://www.getaprop.com/images/products/GPPTR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-6023/powertech_ptr3_propeller_yamaha.html Powertech PTR3 Cupped Bowlifting Propeller fits 40-140 HP Mercury Outboards... Equivalent to Laser & Ballistic XL... Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Highly Polished Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Powertech PTR3-Mercury Outboard Lifter propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15" to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this powertech propeller is great for high performance applications requiring grip, lift and speed. http://www.getaprop.com/content-product_info/product_id-5586/powertech_ptr3_propeller_mercury.html http://www.getaprop.com/images/products/GPPTR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5586/powertech_ptr3_propeller_mercury.html Powertech 13.50" Diameter PTR3- Blade Bowlifting Stainless Propeller fits 40-140hp Evinrude-Johnson Outboard & OMC Cobra 400 Sterndrives... Powertech PTR3 Evinrude Johnson Lifter propeller: 13.50 diameter available in 1 pitch increments from 15 to 23, 3-blade right- or left-hand rotation. With high rake and excellent lift, this propeller is great for high performance applications requiring grip, lift and speed. Similar to Laser & Ballistic XL... 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9187/powertech_ptr3_propeller_e_j.html http://www.getaprop.com/images/products/GPPTR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9187/powertech_ptr3_propeller_e_j.html Powertech 13.50" Diameter Hi-Thrust Propeller fits 60-140 HP Suzuki Outboards... Powertech PTR3-Suzuki Outboard Lifter propeller is a 13.50 diameter Propeller available in 1 pitch increments from 15 to 23, 3-blade right or left-hand rotation. With high rake and excellent lift, this powertech propeller is great for high performance applications requiring grip, lift and speed. 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5767/powertech_ptr3_propeller_suzuki.html http://www.getaprop.com/images/products/GPPTR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-5767/powertech_ptr3_propeller_suzuki.html Powertech 14.00" Diameter LNR3-Blade Stainless Propeller fits 60-140 HP Suzuki Outboards... Powertech LNR3 Suzuki Outboard Propeller is 14 diameter, available in 1 pitch increments from 17 to 23. Right-hand rotation with excellent lift and grip, this powertech is the factory equivalent of the Suzuki 14 diameter propeller. 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-8884/powertech_lnr3_propeller_suzuki.html http://www.getaprop.com/images/products/GPLNR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-8884/powertech_lnr3_propeller_suzuki.html Powertech 14.00" Diameter LNR3-Blade Stainless Propeller fits 40-140 HP Evinrude Johnson & Suzuki Outboards... Powertech LNR3 Johnson Evinrude OEM Equivalent: 14 diameter 3-blade available in 1 pitch increments from 17 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter propeller. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9184/powertech_lnr3_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPLNR31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9184/powertech_lnr3_stainless_propeller_e_j.html Powertech 14.00" Diameter LNR4-Blade Stainless Propeller fits 40-140 HP Evinrude Johnson & Suzuki Outboards... Powertech LNR4 Johnson Evinrude OEM Equivalent: 14 diameter 4-blade available in 1 pitch increments from 18 to 23. Right-hand rotation with excellent lift and grip, this is the factory equivalent of the Suzuki 14 diameter propeller. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9183/powertech_lnr4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPLNR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9183/powertech_lnr4_stainless_propeller_e_j.html Powertech 13.25" Diameter NRS4- Blade Turbo Series Stainless Propeller fits 40-140hp Evinrude-Johnson Outboard & OMC Cobra 400 Sterndrives... Powertech NRS4 Evinrude Johnson Turbo propeller: 13.25 diameter propeller available in 1 increments from 14 to 21. Available in right- and left-hand rotation, perfect Flats n Bay prop. Similar to Turbo & Mercury Laser II. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9186/powertech_nrs4_propeller_e_j.html http://www.getaprop.com/images/products/GPNRS41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9186/powertech_nrs4_propeller_e_j.html Powertech 13.50" Diameter PTR4 Lifter Series Propeller fits 60-140 HP Suzuki Outboards... Powertech PTR4 Suzuki Outboard Lifter Series 4 blade propeller is 13.50 diameter, available in 1 pitch increments from 15 to 23. 4-blade right-hand rotation. The high rake and 4 blades gives this powertech prop greater lift, grip and load-carrying capabilities than the PTR3. 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-8236/powertech_ptr4_propeller_suzuki.html http://www.getaprop.com/images/products/GPPTR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-8236/powertech_ptr4_propeller_suzuki.html Powertech 13.50" Diameter PTR4- Blade Bowlifting Stainless Propeller fits 40-140hp Evinrude-Johnson Outboard & OMC Cobra 400 Sterndrives... Powertech PTR4 Evinrude Johnson Lifter propeller: 13.50 diameter, available in 1 pitch increments from 15 to 23. 4-blade right-hand rotation. The high rake and 4 blades gives this prop greater lift, grip and load-carrying capabilities than the PTR3. Similar to Laser & Ballistic XL... 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9188/powertech_ptr4_propeller_e_j.html http://www.getaprop.com/images/products/GPPTR41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9188/powertech_ptr4_propeller_e_j.html Powertech 13.25" Diameter RED4 All Purpose Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... Powertech RED4 All Purpose Powertech propeller is 13.25 diameter, available in 1 pitch increments from 12 to 21. 4-blade with right- and left-hand rotation, this Powertech prop has moderate rake and cup. A great all-purpose propeller perfect for twin motor applications, similar to Rapture, Ballistic & Stiletto propellers. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9189/powertech_red4_stainless_propeller_e_j.html http://www.getaprop.com/images/products/GPRED41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9189/powertech_red4_stainless_propeller_e_j.html Powertech 13.00" Diameter SCD3-Blade Sternlifting Stainless Propeller fits 40-140hp Evinrude-Johnson Outboard & OMC Cobra 400 Sterndrives... Powertech SCD3 Evinrude Johnson Semi Cleaver propeller is 13 diameter available in 1 pitch increments from 13 to 21. 3-blade with left or right-hand rotation, the Cleaver is a Sternlifter similar to the Yahama semi-cleaver 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9191/powertech_scd3_propeller_e_j.html http://www.getaprop.com/images/products/GPSCD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9191/powertech_scd3_propeller_e_j.html Powertech 13.00" Diameter SCD3 Semi-Cleaver Sternlifter Stainless Propeller fits 50-130 HP Yamaha Outboards... SCD3 Yamaha Outboard Semi Cleaver 3-blade Powertech propeller is 13 diameter available in 1 pitch increments from 13 to 21. 3-blade with left or right-hand rotation gives the Semi-Cleaver excellent sternlift and grip. Great porpoise control for transom-mounted bottoms or shallow Vs. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9195/powertech_scd3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCD31 copy.jpg http://www.getaprop.com/content-product_info/product_id-9195/powertech_scd3_propeller_yamaha.html Powertech 13.00" Diameter SCD4 Semi-Cleaver Sternlifter Stainless Propeller fits 50-130 HP Yamaha Outboards... SCD4 Yamaha Outboard Semi Cleaver 4-blade Powertech propeller is 13 diameter available in 1 pitch increments from 13 to 21. 4-blade with left or right-hand rotation gives the Semi-Cleaver excellent sternlift and grip. Great porpoise control for transom-mounted bottoms or shallow Vs. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer F70 (Four Stroke) 2010 and Newer F80 (Four Stroke) 1999-2002 F90 (Four Stroke) 1999 and Newer F100 (Four Stroke) 1999 and Newer F115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-5980/powertech_scd4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCD41 copy.jpg http://www.getaprop.com/content-product_info/product_id-5980/powertech_scd4_propeller_yamaha.html Powertech 13.00" Diameter SCD4-Blade Sternlifting Stainless Propeller fits 40-140hp Evinrude-Johnson Outboard & OMC Cobra 400 Sterndrives... Powertech SCD4 Evinrude Johnson Semi Cleaver propeller: 13 diameter available in 1 pitch increments from 13 to 21. 4-blade with left- or right-hand rotation gives the Semi-Cleaver excellent sternlift and grip. Great porpoise control for transom-mounted bottoms or shallow Vs. 4.25" Gearcase 13 & 15 Tooth Spline Thru Hub Exhaust OEM Rubber Hub Bushing High Polish Finish OM-140 Hub Fitment (13 Tooth Spline) 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 Model 400 Sterndrive: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra Sterndrive: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 SF-115 Hub Fitment (15 Tooth Spline) 90,115,140 HP 4-Stroke 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9192/powertech_scd4_propeller_e_j.html http://www.getaprop.com/images/products/GPSCD41 copy.jpg http://www.getaprop.com/content-product_info/product_id-9192/powertech_scd4_propeller_e_j.html Powertech 14" Diameter WBH3 Hi-Thrust Propeller fits 60-140 HP Suzuki Outboards... Powertech WBH3 Suzuki Outboard Thruster Series Propeller is a 14 diameter propeller available in 1 increments from 7 to 14. Right-hand rotation, this powertech wide-blade, load pushing prop is the choice for pontoons and workboats. 4.25" Gearcase Rubber OEM Hub Included Highly Polished Finish SZ-140 Hub Fitment (13 Tooth Spline) DF-60 Four-Stroke 1998 & Newer DF-70 Four-Stroke 1998 thru 2008 DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer SF-115 Hub Fitment (15 Tooth Spline) DF-70A,80A,90A 4-Stroke 2009 & Newer DF-90 4-Stroke 2001 & 2008 DF-100 4-Stroke 2009 & Newer DF-115 4-Stroke 2001 & Newer DF-140 4-Stroke 2002 & Newer http://www.getaprop.com/content-product_info/product_id-5757/powertech_wbh3_propeller_suzuki.html http://www.getaprop.com/images/products/GPWBH3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5757/powertech_wbh3_propeller_suzuki.html Powertech 14.00" Dimeter WBH3 Thruster Series Load Pushing Stainless Propeller fits 50-130 HP Yamaha Outboards... Powertech WBH3 Yamaha Outboard Thruster Series Powertech Propeller is a 14 diameter propeller available in 1 increments from 7 to 14. Right-hand rotation, this wide-blade, load pushing Powertech prop is the choice for pontoons and workboats. 4.25" Gearcase 15 Tooth Spline - Thru Hub Exhaust Rubber OEM Hub Included Highly Polished Finish T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-7856/powertech_wbh3_series_propeller_yamaha.html http://www.getaprop.com/images/products/GPWBH3 copy.jpg http://www.getaprop.com/content-product_info/product_id-7856/powertech_wbh3_series_propeller_yamaha.html Power Tech X/Series Stainless Propeller fits OMC 400 Cobra Sterndrives... Equivalent to Michigan Apollo. Thru Hub Exhaust 13 Tooth Spline Optional XHS Hub Kit 106 Standard Finish Is Polish Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-8778/power_tech_x_series_propeller_omc400.html http://www.getaprop.com/images/products/PTELD3R.jpg http://www.getaprop.com/content-product_info/product_id-8778/power_tech_x_series_propeller_omc400.html Michigan Apollo-3 Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7652/michigan_apollo_3_propeller_yamaha.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-7652/michigan_apollo_3_propeller_yamaha.html Michigan Apollo 3 Blade Stainless Propeller fits Volvo Penta SX Drive... XHS Hub Kit 105 (Not Included) Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-6760/michigan_apollo_3_propeller_volvo_sx.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-6760/michigan_apollo_3_propeller_volvo_sx.html Michigan Large Dia. Apollo-3 Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller http://www.getaprop.com/content-product_info/product_id-7639/michigan_lg_dia_apollo_3_propeller_omc800.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-7639/michigan_lg_dia_apollo_3_propeller_omc800.html Michigan Apollo-3 Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller http://www.getaprop.com/content-product_info/product_id-7637/michigan_apollo_3_propeller_omc800.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-7637/michigan_apollo_3_propeller_omc800.html Michigan Large Diameter Apollo-3 Stainless Propeller fits Alpha & Bravo 1 Drives... XHS Hub Kit 102 Not Included High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7749/michigan_apollo_3_lg_dia_propeller.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-7749/michigan_apollo_3_lg_dia_propeller.html Apollo 3 Blade Stainless Propeller fits Alpha & Bravo 1 Drives... XHS Hub Kit 102 Not Included High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7520/michigan_apollo_propeller.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-7520/michigan_apollo_propeller.html Michigan Apollo-3 Stainless Propeller fits 40-75 HP Force Outboards... 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-98 Requires XHS Hub Kit # 114 (Not Included) High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-4836/michigan_apollo_3_propeller_force.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-4836/michigan_apollo_3_propeller_force.html Michigan Apollo 3 Blade Stainless Propeller fits OMC Model 400, Cobra Drives... Thru Hub Exhaust 13 Tooth Spline Requires XHS Hub Kit #106 (Not Included) Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7541/michigan_apollo_propeller_omc400.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-7541/michigan_apollo_propeller_omc400.html Michigan Apollo-3 Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-4669/michigan_apollo_3_propeller_e_j.html http://www.getaprop.com/images/products/apollo31.jpg http://www.getaprop.com/content-product_info/product_id-4669/michigan_apollo_3_propeller_e_j.html Powertech Aluminum Propeller fits 50-130 HP Yamaha Outboards... D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8699/powertech_propeller_yamaha.html http://www.getaprop.com/images/products/PTADYN.jpg http://www.getaprop.com/content-product_info/product_id-8699/powertech_propeller_yamaha.html Powertech Aluminum Propeller fits 60-140 HP Nissan/Tohatsu Outboards... D Class 3 & 4 Stroke 60-140 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Bushing Included. 60C (Large Gearcase) 1999 Thru 70C (Large Gearcase) All Years 90 HP 1987 and Newer 115 HP 1992 and Newer 120 HP 1988 and Newer 140 HP 1988 and Newer http://www.getaprop.com/content-product_info/product_id-8701/powertech_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/PTADYN.jpg http://www.getaprop.com/content-product_info/product_id-8701/powertech_propeller_nissan_tohatsu.html Michigan Vortex-3 "New" Wide Blade Aluminum Propeller fits 60-140 HP Suzuki Outboards... XHS110 Hub Kit DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit DF-90 2001 and Newer DF-115 2001 and Newer XHS126 Hub Kit DF-140 2002 and Newer XHS227 Hub Kit DF-70A/80A/90A http://www.getaprop.com/content-product_info/product_id-7746/michigan_vortex_3_wide_propeller_suzuki.html http://www.getaprop.com/images/products/vortex1[1][1].jpg http://www.getaprop.com/content-product_info/product_id-7746/michigan_vortex_3_wide_propeller_suzuki.html Solas Amita-4 Rubex Propeller Fits 60-140 HP Suzuki Outboards... Interchangeable Hub System XHS110 Hub Kit DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit DF-90 2001 and Newer DF-115 2001 and Newer XHS126 Hub Kit DF-140 2002 and Newer XHS227 Hub Kit DF-70A/80A/90A Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7474/solas_amita_4_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7474/solas_amita_4_rubex_propeller_suzuki.html Solas Amita-3 Rubex Propeller Fits 60-140 HP Suzuki Outboards... Interchangeable Hub System Thru Hub Exhaust XHS110 Hub Kit DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit DF-90 2001 and Newer DF-115 2001 and Newer XHS126 Hub Kit DF-140 2002 and Newer XHS227 Hub Kit DF-70A/80A/90A Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7473/solas_amita_3_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7473/solas_amita_3_rubex_propeller_suzuki.html Quicksilver Black Diamond Aluminum Propeller fits 60-140 HP Suzuki Outboards... XHS110 Hub Kit DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit DF-90 2001 and Newer DF-115 2001 and Newer XHS126 Hub Kit DF-140 2002 and Newer XHS227 Hub Kit DF-70A/80A/90A http://www.getaprop.com/content-product_info/product_id-5890/quicksilver_black_diamond_propeller_suzuki.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-5890/quicksilver_black_diamond_propeller_suzuki.html Powertech Aluminum Propeller fits 60-140 HP Suzuki Outboards... Rubber OEM Hub Bushing 4 1/4" Gearcase PT-ADS HUB-13 Tooth Spline DF-60,70 Four-Stroke 1998 & Newer DT-75 1983-97 DT-85 1979 & Newer DT-90 1989-97 DT-100 1989 & Newer DT-115,140 1981 & Newer PT-ADFS HUB-15 Tooth Spline DF-90,115 (Four Stroke) 2001 and Newer DF-140 (Four Stroke) 2002 and Newer http://www.getaprop.com/content-product_info/product_id-8698/powertech_propellers_suzuki.html http://www.getaprop.com/images/products/PTADFS.jpg http://www.getaprop.com/content-product_info/product_id-8698/powertech_propellers_suzuki.html Powertech Aluminum Propeller fits 60-140 HP Suzuki Outboards... XHS110 Hub Kit DF-60 1998 and Newer DF-70 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer XHS125 Hub Kit DF-90 2001 and Newer DF-115 2001 and Newer XHS126 Hub Kit DF-140 2002 and Newer XHS227 Hub Kit DF-70A/80A/90A http://www.getaprop.com/content-product_info/product_id-8710/powertech_propellers_suzuki.html http://www.getaprop.com/images/products/PTAEUN.JPG http://www.getaprop.com/content-product_info/product_id-8710/powertech_propellers_suzuki.html Powertech Aluminum Propeller fits 60-140 HP Nissan Tohatsu Outboards... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit #109 60C (Large Gearcase) 1999 Thru 70C (Large Gearcase) All Years 90 HP 1987 and Newer 115 HP 1992 and Newer 120 HP 1988 and Newer 140 HP 1988 and Newer http://www.getaprop.com/content-product_info/product_id-8709/powertech_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8709/powertech_propeller_nissan_tohatsu.html Powertech Aluminum Propeller fits 40-140 HP Mercury Outboards... Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-8707/powertech_aluminum_propeller_mercury.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8707/powertech_aluminum_propeller_mercury.html Power Tech "New Style" Swept Blade Stainless Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Highly Polished Finish Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-7630/power_tech_swept_blade_propeller_omc400.html http://www.getaprop.com/images/products/osn.JPG http://www.getaprop.com/content-product_info/product_id-7630/power_tech_swept_blade_propeller_omc400.html 10.38" Diameter Powetech SCB4 Accelerator Stainless Propeller fits 30-70 HP Yamaha Outboards... Rubber OEM Hub Bushing Thru Hub Exhaust & 13 Tooth Spline Highly Polished Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-5878/powertech_scb4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCB4 copy.jpg http://www.getaprop.com/content-product_info/product_id-5878/powertech_scb4_propeller_yamaha.html Powertech NREB3 Stainless Propeller fits 35-66 HP Suzuki Outboards... Factory Equivalent to Mercury Black Max with New Larger Diameter. 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 Diameter is variable from 10.375 to 10.5, this Suzuki Outboard Powertech Propeller is available in 11" thru 15 pitch. 3-blade right-hand rotation is a larger diameter version of the REB3 to handle higher horsepower or heavier loads. http://www.getaprop.com/content-product_info/product_id-9176/powertech_nreb3_propeller_suzuki.html http://www.getaprop.com/images/products/GPNREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9176/powertech_nreb3_propeller_suzuki.html 10.25" Diameter Powertech REB3 All-Purpose Stainless Propeller fits 30-70 HP Yamaha Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-5866/powertech_reb3_propeller_yamaha.html http://www.getaprop.com/images/products/gpreb3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5866/powertech_reb3_propeller_yamaha.html 10.25" Diameter Powertech REB3 All Purpose Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-5741/powertech_reb3_propeller_suzuki.html http://www.getaprop.com/images/products/gpreb3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5741/powertech_reb3_propeller_suzuki.html 10.25" Diameter Powertech REB3 All-Purpose Stainless Steel Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing Included Standard Finish Is Satin Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-5562/powertech_reb3_propeller_mercury.html http://www.getaprop.com/images/products/gpreb3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5562/powertech_reb3_propeller_mercury.html 10.25" Diameter Powertech REB3 Stainless Propeller fits 35-60 HP Honda Outboards... Factory Equivalent to Mercury Black Max. 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech REB3 - 10.25 diameter, this Honda Outboard Propeller is available in pitches from 10 to 17 in 1 increments. 3-blade design with right-hand rotation, this propeller is the factory equivalent to the Mercury BlackMax. Cupped with a 15&#8304; aft rake, an excellent all-purpose prop for the Suzuki 20-35 horsepower family. http://www.getaprop.com/content-product_info/product_id-9152/powertech_reb3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPREB copy.jpg http://www.getaprop.com/content-product_info/product_id-9152/powertech_reb3_stainless_propeller_honda.html Powertech Aluminum Propeller fits 75-130 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline Requires XHS 102 Hub Kit 75-90 HP 1995-98 Requires XHS 107 Hub Kit 75,90,115,130 1998 & Newer 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer http://www.getaprop.com/content-product_info/product_id-8705/powertech_aluminum_propeller_honda.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8705/powertech_aluminum_propeller_honda.html 10.75" Diameter Powertech SWC4 All Purpose-4 Blade Stainless Propeller fits 35-65 HP Suzuki Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 Powertech SWC4 Propeller, 10.75 diameter is available in 1 increments from 10 to 15 pitch. 4-blade with right-hand rotation, this propeller has more grip and cavitation resistance than the SWC3, with a hardwall cup, excellent for motor elevation, tunnels, and cavitation-prone applications. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9179/powertech_swc4_propeller_suzuki.html http://www.getaprop.com/images/products/GPSWC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9179/powertech_swc4_propeller_suzuki.html 10.75" Diameter Powertech SWC3 All Purpose-3 Blade Stainless Propeller fits 35-65 HP Suzuki Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 Powertech SWC3 Propeller, 10.75 diameter this Suzuki Outboard Propeller is available in 1 increments from 10 to 14pitch. 3-blade with right-hand rotation, this Powertech propeller has exceptional grip and cavitation resistance with a hardwall cup, motor elevation and tunnel capabilities. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9178/powertech_swc3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSWC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9178/powertech_swc3_propeller_suzuki.html 11.00" Diameter Powertech SCA3 Stainless Propeller fits 35-65 HP Suzuki Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 SCA3 - 11 diameter prop, this Suzuki Outboard Propeller is a larger diameter version of the SCB, to handle higher horsepower and heavier loads. The Powertech propeller is a 3-blade design with right-hand rotation, available in pitches of 13"-15". http://www.getaprop.com/content-product_info/product_id-9177/powertech_sca3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSCA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9177/powertech_sca3_propeller_suzuki.html 11.25" Diameter Powertech ILC3 Stainless Propeller fits 35-65 HP Suzuki Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing Polished Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 11.25 diameter, the ILC Xtreme Suzuki Outboard Propeller is available in one inch increments, 11-15. This right-hand rotation 3-blade Powertech propeller has no cup, and is best in fully submerged applications. Will not work properly in ventilating conditions. The Xtreme value series is available in Polished Finish only. http://www.getaprop.com/content-product_info/product_id-9175/powertech_ilc3_propeller_suzuki.html http://www.getaprop.com/images/products/GPILC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9175/powertech_ilc3_propeller_suzuki.html 11.25" Diameter Powertech SRD4 All Purpose-4 Blade Stainless Propeller fits 35-65 HP Suzuki Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1999 & 2009 DF40A 2010 & Newer DF50 1999 & 2009 DF50A 2010 & Newer DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DF60A 2010 & Newer DT65 1985-97 SRD4 - 11.25 diameter, the Accelerator Powertech Propeller is a 4-blade design available in right-hand rotation and 1 increments from 11-17 pitch. This is an excellent all-around blade for 50-60 horsepower Suzuki Outboard motors. http://www.getaprop.com/content-product_info/product_id-9174/powertech_srd4_propeller_suzuki.html http://www.getaprop.com/images/products/GPSRD4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9174/powertech_srd4_propeller_suzuki.html 12.00" Diameter Michigan Vortex-4 Aluminum Propeller fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 117 (Not Included) http://www.getaprop.com/content-product_info/product_id-5646/michigan_vortex_4_propeller_yamaha.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-5646/michigan_vortex_4_propeller_yamaha.html 11.00" Diameter Powertech SCA3 Stainless Propeller fits 30-70 HP Yamaha Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Powertech SCA3 - 11 diameter prop, this Yamaha Outboard Powertech Propeller is a larger diameter version of the SCB, to handle higher horsepower and heavier loads. This Powertech prop is a 3-blade design with right-hand rotation, available in pitches of 13"-15". http://www.getaprop.com/content-product_info/product_id-9173/powertech_sca3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9173/powertech_sca3_propeller_yamaha.html 12.00" Diameter Poewertech WBA3 Stainless Thruster Propeller fits 30-70 HP Yamaha Outboards...(Wide Blade) 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer The Thruster series Yamaha Outboard Powertech Propeller is 12 diameter, available in 1 pitch selections from 7 to 13 pitch. The right-hand rotation Powertech Thruster series is a wide-blade, load pushing blade great for pontoon and workboats. http://www.getaprop.com/content-product_info/product_id-9172/powertech_wba3_propeller_yamaha.html http://www.getaprop.com/images/products/GPWBA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9172/powertech_wba3_propeller_yamaha.html 10.75" Diameter Powertech SWC4 All Purpose-4 Blade Stainless Propeller fits 30-70 HP Yamaha Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Great all-around Powertech propeller, 10.75 diameter is available in 1 increments from 10 to 15 pitch. 4-blade with right-hand rotation, this Powertech prop has more grip and cavitation resistance than the SWC3, with a hardwall cup, excellent for motor elevation, tunnels, and cavitation-prone applications. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9171/powertech_swc4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSWC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9171/powertech_swc4_propeller_yamaha.html 10.75" Diameter Powertech SWC3 All Purpose-3 Blade Stainless Propeller fits 30-70 HP Yamaha Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Great all-around propeller, 10.75 diameter this Yamaha Outboard Powertech Propeller is available in 1 increments from 10 to 14pitch. 3-blade with right-hand rotation, this Powertech propeller has exceptional grip and cavitation resistance with a hardwall cup, motor elevation and tunnel capabilities. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9170/powertech_swc3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSWC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9170/powertech_swc3_propeller_yamaha.html 11.25" Diameter Powertech SRD4 All Purpose-4 Blade Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Powertech SRD4 - 11.25 diameter, the Accelerator Powertech Propeller is a 4-blade design available in right-hand rotation and 1 increments from 11-17 pitch. This is an excellent all-around blade for 50-60 horsepower Yamaha Outboard motors. http://www.getaprop.com/content-product_info/product_id-9169/powertech_srd4_propeller_yamaha.html http://www.getaprop.com/images/products/GPSRD4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9169/powertech_srd4_propeller_yamaha.html 11.25" Diameter Powertech SRD3 All Purpose-3 Blade Stainless Propeller fits 30-70 HP Yamaha Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish RPM GUIDE Yamaha Outboards 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Powertech SRD3 - 11.25 diameter, the SRD3 Yamaha Outboard Powertech Propeller is available in one-inch increments from 11-17 pitch. A 3-blade, right hand prop, this All Purpose Powertech prop has 20 rake. http://www.getaprop.com/content-product_info/product_id-9168/powertech_srd3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSRD3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9168/powertech_srd3_propeller_yamaha.html 10.38" Diameter Powertech SCB3 Stainless Propeller fits 30-70 HP Yamaha Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Powertech SCB3 - 10.375 diameter Powertech prop available in 1 increments, 10-17. this Yamaha Outboard Powertech Propeller is a 3-blade speed propeller, right-hand rotation, and has excellent sternlift, good on inflatables and flat-bottomed hulls. http://www.getaprop.com/content-product_info/product_id-9167/powertech_scb3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9167/powertech_scb3_propeller_yamaha.html 11.25" Diameter Powertech ILC3 Stainless Propeller fits 30-70 HP Yamaha Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing Polished Finish 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer Powertech ILC3 -11.25 diameter, the ILC Xtreme Yamaha Outboard Powertech Propeller is available in one inch increments, 11-15. This right-hand rotation 3-blade prop has no cup, and is best in fully submerged applications. Will not work properly in ventilating conditions. The Powertech Xtreme value series is available in Polished Finish. http://www.getaprop.com/content-product_info/product_id-9165/powertech_ilc3_propeller_yamaha.html http://www.getaprop.com/images/products/GPILC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9165/powertech_ilc3_propeller_yamaha.html TLR-10" Diameter, PowerTech Tohatsu Series Stainless Propeller fits 25-30 HP Honda Outboards... Factory Equivalent to Nissan Tohatsu. Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish RPM GUIDE Honda Outboards BF-25 HP All Years BF-30 HP All Years TLR3 - 10 diameter, this Honda Outboard Propeller is available in 1 pitch increments from 10 thru 15. Right-hand rotation with a 3-blade cupped design, the TLR-3 is a low-rake OEM equivalent for Tohatsu and Nissan aluminum or stainless props. If replacing an OEM aluminum propeller, drop 1-2 in pitch. http://www.getaprop.com/content-product_info/product_id-9124/powertech_tlr3_propeller_honda.html http://www.getaprop.com/images/products/GPTLR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9124/powertech_tlr3_propeller_honda.html SRS3-9.25" Diameter, PowerTech All Purpose Series Stainless Propeller fits 25-30 HP Honda Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish BF-25 HP All Years BF-30 HP All Years SRS3 - 9.25 diameter, this Honda Outboard Propeller is available in 12 and 13 pitch. This 3-blade right-hand rotation is the best all-purpose, submerged, small diameter prop with no cup, good for Yamaha and Honda 25-horsepower family. http://www.getaprop.com/content-product_info/product_id-9123/powertech_srs3_propeller_honda.html http://www.getaprop.com/images/products/GPSRS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9123/powertech_srs3_propeller_honda.html SRN3-10" Diameter, PowerTech Black Max Series Stainless Propeller fits 25-30 HP Honda Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish BF-25 HP All Years BF-30 HP All Years SRN-3 10 diameter, This Honda Outboard Propeller is available in 10 and 11 pitches. 3-blade design with right-hand rotation, this prop is the best all-purpose design with no cup. Recommended for applications are fully submerged and cavitation is not an issue. http://www.getaprop.com/content-product_info/product_id-9122/powertech_srn3_propeller_honda.html http://www.getaprop.com/images/products/GPSRN3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9122/powertech_srn3_propeller_honda.html SRA4-10" Diameter, PowerTech Accelerator Series Stainless Propeller fits 25-30 HP Honda Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish BF-25 HP All Years BF-30 HP All Years SRA-4 10 diameter, the SRA4 Honda Outboard Propeller is available in one-inch increments from 9-13 pitch. A 4-blade, right hand prop, this All Purpose prop has 20 aft rake and is cupped. This prop will maintain bite at higher elevations, and give you superior cornering, acceleration and sternlift http://www.getaprop.com/content-product_info/product_id-9121/powertech_sra4_propeller_honda.html http://www.getaprop.com/images/products/gpsra4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9121/powertech_sra4_propeller_honda.html SRA3-10" Diameter, PowerTech All Purpose Series Stainless Propeller fits 25-30 HP Honda Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase OEM Rubber Hub Bushing High Polish Finish BF-25 HP All Years BF-30 HP All Years SRA-3 10 diameter, this Honda Outboard Propeller is available in one-inch increments from 9-15 pitch. A 3-blade, right hand prop, this All Purpose prop has 20 rake and is cupped. With good cavitation resistance, this prop is an excellent all-around performer. http://www.getaprop.com/content-product_info/product_id-9120/powertech_sra3_propeller_honda.html http://www.getaprop.com/images/products/gpsra3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9120/powertech_sra3_propeller_honda.html ILB-10" Diameter, PowerTech XTreme Value Series Stainless Propeller fits 25-30 HP Honda Outboards... Thru Hub Exhaust 10 Tooth Spline 3.00" Gearcase Polished Finish OEM Rubber Hub Bushing BF-25 HP All Years BF-30 HP All Years ILB-3 10 diameter, this Honda Outboard Propeller is available in 3-blade design, 11 and 13 pitch. Right-hand rotation with no cup, this prop is good for submerged applications, and will not work properly in ventilating conditions. Xtreme value series is available in Polished Finish only. http://www.getaprop.com/content-product_info/product_id-9118/powertech_ilb3_propeller_honda.html http://www.getaprop.com/images/products/GPILB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9118/powertech_ilb3_propeller_honda.html TLR-10" Diameter, Powertech Tohatsu Series Stainless Propeller fits 20-30hp Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer 10" DIAMETER, AVAILABLE IN 10"- 14" PITCH, 3-BLADES, RIGHT-HAND ROTATION, LOW RAKE, OEM EQUIVALENT FOR TOHATSU/NISSAN ALUMINUM AND STAINLESS, NO TRIM TAB ADJUSTMENT REQUIRED, CUPPED, IF REPLACING OEM ALUMINUM PROPELLER, DROP 1"-2" IN PITCH - POLISHED FINISH ONLY http://www.getaprop.com/content-product_info/product_id-9138/powertech_tlr3_propeller_yamaha.html http://www.getaprop.com/images/products/GPTLR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9138/powertech_tlr3_propeller_yamaha.html SRS3-9.25" Diameter, Powertech All Purpose Series Stainless Propeller fits 20-30hp Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer 9.25" DIAMETER, AVAILABLE IN 12" - 13" PITCH, 3-BLADES, RIGHT-HAND ROTATION, BEST ALL PURPOSE, SMALL DIAMETER, NO CUP, GOOD FOR YAMAHA AND HONDA 25HP FAMIILY WHEN RUNNING SUBMERGED - POLISHED FINISH ONLY http://www.getaprop.com/content-product_info/product_id-9137/powertech_srs3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSRS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9137/powertech_srs3_propeller_yamaha.html SRN3-10" Diameter, Powertech Black Max Series Stainless Propeller fits 20-30hp Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer 10" DIAMETER, AVAILABLE IN 10"-11" PITCHES, 3-BLADES, RIGHT-HAND ROTATION, BEST ALL-PURPOSE, NO CUP, BEST FULLY SUBMERGED APPLICATIONS WHERE CAVITATION IS NOT AN ISSUE - POLISHED FINISH ONLY http://www.getaprop.com/content-product_info/product_id-9136/powertech_srn3_propeller_yamaha.html http://www.getaprop.com/images/products/GPSRN3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9136/powertech_srn3_propeller_yamaha.html SRA4-10" Diameter, Powertech Stainless Propeller fits 20-30hp Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer 10" DIAMETER, AVAILABLE IN 10"-13" PITCHES, 4-BLADES, RIGHT-HAND ROTATION, ALL PUPOSE, 20 DEGREES AFT RAKE, CUPPED, WILL MAINTAIN BITE AT HIGHER ELEVATIONS, SUPERIOR CORNERING, ACCELERATION AND STERNLIFT - POLISHED FINISH ONLY http://www.getaprop.com/content-product_info/product_id-9135/powertech_sra4_propeller_yamaha.html http://www.getaprop.com/images/products/gpsra4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9135/powertech_sra4_propeller_yamaha.html SRA3-10" Diameter, Powertech Compact-Tiller Stainless Propeller fits 20-30hp Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer SRA-3 10 diameter, this Yamaha Outboard Powertech Propeller is available in one-inch increments from 9-15 pitch. A 3-blade, right hand prop, this All Purpose Powertech prop has 20 rake and is cupped. With good cavitation resistance, this prop is an excellent all-around performer. http://www.getaprop.com/content-product_info/product_id-9134/powertech_sra3_propeller_yamaha.html http://www.getaprop.com/images/products/gpsra3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9134/powertech_sra3_propeller_yamaha.html ILB-10" Diameter, Powertech XTreme Series Stainless Propeller fits 20-30hp Yamaha Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing Polished Finish 20 HP 1996-97 25 HP 1980 and Newer 30 HP 1979 and Newer F25 HP 4-Stroke 2001 and Newer F30 HP 4-Stroke 2001 and Newer ILB-3 10 diameter, this Yamaha Outboard Powertech Propeller is available in 3-blade design, 11 and 13 pitch. Right-hand rotation with no cup, this Powertech prop is good for submerged applications, and will not work properly in ventilating conditions. Xtreme value series is available in Polished Finish only. http://www.getaprop.com/content-product_info/product_id-9133/powertech_ilb3_propeller_yamaha.html http://www.getaprop.com/images/products/GPILB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9133/powertech_ilb3_propeller_yamaha.html TLR-10" Diameter, Powertech Tohatsu Series Stainless Propeller fits 25-30HP Nissan-Tohatsu Outboards... Factory Equivalent to Nissan Tohatsu. Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer TLR3 - 10 diameter, this Nissan-Tohatsu Outboard Powertech Propeller is available in 1 pitch increments from 10 thru 15. Right-hand rotation with a 3-blade cupped design, the TLR-3 is a low-rake OEM equivalent for Tohatsu and Nissan aluminum or stainless props. If replacing an OEM aluminum propeller, drop 1-2 in pitch http://www.getaprop.com/content-product_info/product_id-9130/powertech_tlr3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPTLR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9130/powertech_tlr3_propeller_tohatsu.html SRS3-9.25" Diameter, Powertech All Purpose Series Stainless Propeller fits 25-30HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer SRS3 - 9.25 diameter, this Nissan-Tohatsu Outboard Powertech Propeller is available in 12 and 13 pitch. This 3-blade right-hand rotation is the best all-purpose, submerged, small diameter prop with no cup, good for Yamaha and Honda 25-horsepower family. http://www.getaprop.com/content-product_info/product_id-9129/powertech_srs3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSRS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9129/powertech_srs3_propeller_tohatsu.html SRN3-10" Diameter, Powertech Black Max Series Stainless Propeller fits 25-30HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer SRN-3 10 diameter, This Nissan-Tohatsu Outboard Powertech Propeller is available in 10 and 11 pitches. 3-blade design with right-hand rotation, this Powertech prop is the best all-purpose design with no cup. Recommended for applications are fully submerged and cavitation is not an issue http://www.getaprop.com/content-product_info/product_id-9128/powertech_srn3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPSRN3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9128/powertech_srn3_propeller_tohatsu.html SRA4-10" Diameter, Powertech Accelerator Series Stainless Propeller fits 25-30HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer SRA-4 10 diameter, This Nissan-Tohatsu Outboard Propeller is available in one-inch increments from 9-13 pitch. A 4-blade, right hand prop, this All Purpose Powertech prop has 20 aft rake and is cupped. This prop will maintain bite at higher elevations, and give you superior cornering, acceleration and sternlift. http://www.getaprop.com/content-product_info/product_id-9127/powertech_sra4_propeller_tohatsu.html http://www.getaprop.com/images/products/gpsra4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9127/powertech_sra4_propeller_tohatsu.html SRA3-10" Diameter, Powerech All Purpose Series Stainless Propeller fits 25-30HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing High Polish Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer SRA-3 10 diameter, this Nissan-Tohatsu Outboard Powerech Propeller is available in one-inch increments from 9-15 pitch. A 3-blade, right hand prop, this All Purpose Powerech prop has 20 rake and is cupped. With good cavitation resistance, this prop is an excellent all-around performer. http://www.getaprop.com/content-product_info/product_id-9126/powertech_sra3_propeller_tohatsu.html http://www.getaprop.com/images/products/gpsra3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9126/powertech_sra3_propeller_tohatsu.html ILB-10" Diameter, Powerech XTreme Series Stainless Propeller fits 25-30HP Nissan-Tohatsu Outboards... Thru Hub Exhaust 10 Tooth Spline 3.25" Gearcase OEM Rubber Hub Bushing Polished Finish 25 HP All Years 25 HP 4-Stroke 2002 & Newer 30 HP All Years 30 HP 4-Stroke 2002 & Newer ILB-3 10 diameter, this Tohatsu Outboard Propeller is available in 3-blade design, 11 and 13 pitch.Right-hand rotation with no cup, this Powerech prop is good for submerged applications, and will not work properly in ventilating conditions. Xtreme value series is available in Polished Finish only. http://www.getaprop.com/content-product_info/product_id-9125/powertech_ilb3_propeller_tohatsu.html http://www.getaprop.com/images/products/GPILB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9125/powertech_ilb3_propeller_tohatsu.html Power Tech Aluminum Propeller fits 30-70HP Yamaha Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 70 HP 1978-83 F30 (4-Stroke) 2001-2005 F40 (4 Stroke) 1999 and Newer F50 (4 Stroke) 1995 and Newer F60 (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8836/powertech_aluminum_propeller_yamaha.html http://www.getaprop.com/images/products/PT-CU50-1.jpg http://www.getaprop.com/content-product_info/product_id-8836/powertech_aluminum_propeller_yamaha.html 11.25" Diameter Powertech Multi-Use Series Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-7732/powertech_srd3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSRD3 copy.jpg http://www.getaprop.com/content-product_info/product_id-7732/powertech_srd3_propeller_suzuki.html 12.00" Diameter Powertech (Wide) Thruster & Load Series Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-5736/powertech_wba3_propeller_suzuki.html http://www.getaprop.com/images/products/GPWBA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5736/powertech_wba3_propeller_suzuki.html Power Tech-3 Blade Aluminum Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-8834/powertech_aluminum_propeller_suzuki.html http://www.getaprop.com/images/products/PT-CS.jpg http://www.getaprop.com/content-product_info/product_id-8834/powertech_aluminum_propeller_suzuki.html 10.38" Diameter Powertech SCB3 Speed Series Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-5753/powertech_scb3_propeller_suzuki.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5753/powertech_scb3_propeller_suzuki.html 10.38" Diameter Powertech SCB4 Accelerator Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing High Polish Finish DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-5755/powertech_scb4_propeller_suzuki.html http://www.getaprop.com/images/products/GPSCB4 copy.jpg http://www.getaprop.com/content-product_info/product_id-5755/powertech_scb4_propeller_suzuki.html 10.75" Diameter Powertech SWC4 All Purpose-4 Blade Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.50" Gearcase OEM Rubber Hub Bushing High Polish Finish Model 402-500-700 1977-84 25HP Bigfoot (4-stroke) 1999 - 2005 30HP Bigfoot (4-stroke) 2010 & Newer 30HP 2 & 4 Stroke 1994 & Newer 30HP Sea Pro-Marathon 1994 & Newer 35HP 1984-89 40HP 2 & 4 Stroke (Not Bigfoot) 1977 & Newer 40HP Sea Pro-Marathon 1977 & Newer 45HP 1986-89 48HP Mariner All Years 50HP 2 & 4-Stroke (Not Bigfoot) 1977 & Newer 55HP Mercury Sea Pro-Marathon 1995 & Newer 60HP Not Bigfoot or Sea Pro 1978 & Newer 70HP thru 1983 Bigfoot 40-60 hp Uses 40-140 Section Powertech SWC4 - 10.75 Diameter Great all-around propeller, is available in 1 increments from 10 to 15 pitch. 4-blade with right-hand rotation, this Powertech propeller has more grip and cavitation resistance than the SWC3, with a hardwall cup, excellent for motor elevation, tunnels, and cavitation-prone applications. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9164/powertech_swc4_propeller_mercury.html http://www.getaprop.com/images/products/GPSWC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9164/powertech_swc4_propeller_mercury.html 10.75" Diameter Powertech SWC3 All Purpose-3 Blade Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SWC3 - Great all-around propeller, 10.75 diameter this Honda Outboard Propeller is available in 1 increments from 10 to 14pitch. 3-blade with right-hand rotation, this propeller has exceptional grip and cavitation resistance with a hardwall cup, motor elevation and tunnel capabilities. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9158/powertech_swc3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSWC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9158/powertech_swc3_stainless_propeller_honda.html 10.75" Diameter Powertech SWC3 All Purpose-3 Blade Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.50" Gearcase OEM Rubber Hub Bushing High Polish Finish Model 402-500-700 1977-84 25HP Bigfoot (4-stroke) 1999 - 2005 30HP Bigfoot (4-stroke) 2010 & Newer 30HP 2 & 4 Stroke 1994 & Newer 30HP Sea Pro-Marathon 1994 & Newer 35HP 1984-89 40HP 2 & 4 Stroke (Not Bigfoot) 1977 & Newer 40HP Sea Pro-Marathon 1977 & Newer 45HP 1986-89 48HP Mariner All Years 50HP 2 & 4-Stroke (Not Bigfoot) 1977 & Newer 55HP Mercury Sea Pro-Marathon 1995 & Newer 60HP Not Bigfoot or Sea Pro 1978 & Newer 70HP thru 1983 Bigfoot 40-60 hp Uses 40-140 Section Great all-around propeller, 10.75 diameter this Mercury-Mariner Outboard Powertech Propeller is available in 1 increments from 10 to 14pitch. 3-blade with right-hand rotation, this Powertech prop has exceptional grip and cavitation resistance with a hardwall cup, motor elevation and tunnel capabilities. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9163/powertech_swc3_propeller_mercury.html http://www.getaprop.com/images/products/GPSWC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9163/powertech_swc3_propeller_mercury.html 11.25" Diameter Powertech SRD4 All Purpose-4 Blade Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.50" Gearcase OEM Rubber Hub Bushing High Polish Finish Model 402-500-700 1977-84 25HP Bigfoot (4-stroke) 1999 - 2005 30HP Bigfoot (4-stroke) 2010 & Newer 30HP 2 & 4 Stroke 1994 & Newer 30HP Sea Pro-Marathon 1994 & Newer 35HP 1984-89 40HP 2 & 4 Stroke (Not Bigfoot) 1977 & Newer 40HP Sea Pro-Marathon 1977 & Newer 45HP 1986-89 48HP Mariner All Years 50HP 2 & 4-Stroke (Not Bigfoot) 1977 & Newer 55HP Mercury Sea Pro-Marathon 1995 & Newer 60HP Not Bigfoot or Sea Pro 1978 & Newer 70HP thru 1983 Bigfoot 40-60 hp Uses 40-140 Section Powertech SRD4 - 11.25 diameter, the Accelerator Powertech Propeller is a 4-blade design available in right-hand rotation and 1 increments from 11-17 pitch. This is an excellent all-around blade for 50-60 horsepower Mercury-Mariner Outboard motors. http://www.getaprop.com/content-product_info/product_id-9162/powertech_srd4_propeller_mercury.html http://www.getaprop.com/images/products/GPSRD4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9162/powertech_srd4_propeller_mercury.html 11.25" Diameter Powertech SRD3 All Purpose-3 Blade Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.50" Gearcase OEM Rubber Hub Bushing High Polish Finish Model 402-500-700 1977-84 25HP Bigfoot (4-stroke) 1999 - 2005 30HP Bigfoot (4-stroke) 2010 & Newer 30HP 2 & 4 Stroke 1994 & Newer 30HP Sea Pro-Marathon 1994 & Newer 35HP 1984-89 40HP 2 & 4 Stroke (Not Bigfoot) 1977 & Newer 40HP Sea Pro-Marathon 1977 & Newer 45HP 1986-89 48HP Mariner All Years 50HP 2 & 4-Stroke (Not Bigfoot) 1977 & Newer 55HP Mercury Sea Pro-Marathon 1995 & Newer 60HP Not Bigfoot or Sea Pro 1978 & Newer 70HP thru 1983 Bigfoot 40-60 hp Uses 40-140 Section Powertech SRD3 - 11.25 diameter, the SRD3 Mercury-Mariner Outboard Powertech Propellers are available in one-inch increments from 11-17 pitch. A 3-blade, right hand All Purpose Powertech propeller has 20 rake. http://www.getaprop.com/content-product_info/product_id-9161/powertech_srd3_propeller_mercury.html http://www.getaprop.com/images/products/GPSRD3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9161/powertech_srd3_propeller_mercury.html 11.25" Diameter Powertech SRD3 All Purpose-3 Blade Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SRD3 - 11.25 diameter, the SRD3 Honda Outboard Propeller is available in one-inch increments from 11-17 pitch. A 3-blade, right hand prop, this All Purpose prop has 20 rake. http://www.getaprop.com/content-product_info/product_id-9156/powertech_srd3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSRD3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9156/powertech_srd3_stainless_propeller_honda.html Powertech Aluminum Propeller fits 25-70HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-8830/powertech_aluminum_propeller_mercury.html http://www.getaprop.com/images/products/PT-CM.jpg http://www.getaprop.com/content-product_info/product_id-8830/powertech_aluminum_propeller_mercury.html 11.25" Diameter Powertech ILC3 Stainless Propeller fits 25-75 HP Mercury Outboards... Thru-Hub Exhaust 13 Tooth Spline 3.50" Gearcase OEM Rubber Hub Bushing Polished Finish Model 402-500-700 1977-84 25HP Bigfoot (4-stroke) 1999 - 2005 30HP Bigfoot (4-stroke) 2010 & Newer 30HP 2 & 4 Stroke 1994 & Newer 30HP Sea Pro-Marathon 1994 & Newer 35HP 1984-89 40HP 2 & 4 Stroke (Not Bigfoot) 1977 & Newer 40HP Sea Pro-Marathon 1977 & Newer 45HP 1986-89 48HP Mariner All Years 50HP 2 & 4-Stroke (Not Bigfoot) 1977 & Newer 55HP Mercury Sea Pro-Marathon 1995 & Newer 60HP Not Bigfoot or Sea Pro 1978 & Newer 70HP thru 1983 Bigfoot 40-60 hp Uses 40-140 Section Powertech ILC3 - 11.25 diameter, the ILC Xtreme Mercury Outboard Powertech Propeller is available in one inch pitch increments from 11-15. This right-hand rotation 3-blade Powertech prop has no cup, and is best in fully submerged applications. Will not work properly in ventilating conditions. The Xtreme value series is available in Polished Finish only. http://www.getaprop.com/content-product_info/product_id-9160/powertech_ilc3_propeller_mercury.html http://www.getaprop.com/images/products/GPILC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9160/powertech_ilc3_propeller_mercury.html 10.38" Diameter Powertech SCB3 Speed Stainless Steel Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing Included Highly Polished Finish Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section 10.375" DIAMETER, AVAILABLE IN 10"-17" PITCH, 3 BLADES, RIGHT-HAND ROTATION, SPEED PROPELLER, EXCELLENT STERNLIFT, GOOD ON INFLATABLES AND FLAT-BOTTOM HULLS - SATIN FINISH SHOWN http://www.getaprop.com/content-product_info/product_id-5569/powertech_scb3_propeller_mercury.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5569/powertech_scb3_propeller_mercury.html 10.38" Diameter Powertech SCB4 Acceleraor Stainless Steel Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing Included Highly Polished Finish Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section 10.00" DIAMETER, AVAILABLE IN 13"-15" PITCH, 4 BLADES, RIGHT-HAND ROTATION, EXCELLENT CORNERING, HOLESHOT, AND PORPOISE CONTROL, A PREFERRED CHOICE ON INFLATABLES AND FLAT-BOTTOM HULLS - SATIN FINISH SHOWN http://www.getaprop.com/content-product_info/product_id-5575/powertech_scb4_propeller_mercury.html http://www.getaprop.com/images/products/GPSCB4 copy.jpg http://www.getaprop.com/content-product_info/product_id-5575/powertech_scb4_propeller_mercury.html 12.00" Diameter Poewertech WBA3 Stainless Thruster Propeller fits 25-70 HP Mercury Outboards...(Wide Blade) Thru-Hub Exhaust & 13 Tooth Spline Rubber OEM Hub Bushing Included Highly Polished Finish Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section Powertech WBA3 -The Thruster series Mercury-Mariner Outboard Powertech Propeller is 12 diameter, available in 1 pitch selections from 7 to 13 pitch. The right-hand rotation Thruster series is a wide-blade, load pushing blade great for pontoon and workboats. http://www.getaprop.com/content-product_info/product_id-5558/powertech_wba3_propeller_mercury.html http://www.getaprop.com/images/products/GPWBA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-5558/powertech_wba3_propeller_mercury.html 11.25" Diameter Powertech ILC3 Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing Polished Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech ILC3 - 11.25 diameter, the Powertech ILC Xtreme Honda Outboard Propeller is available in one inch increments, 11-15. This right-hand rotation 3-blade prop has no cup, and is best in fully submerged applications. Will not work properly in ventilating conditions. The Xtreme value series is available in Polished Finish only. http://www.getaprop.com/content-product_info/product_id-9150/powertech_ilc3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPILC3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9150/powertech_ilc3_stainless_propeller_honda.html 10.75" Diameter Powertech SWC4 All Purpose-4 Blade Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SWC4 - Great all-around propeller, 10.75 diameter is available in 1 increments from 10 to 15 pitch. 4-blade with right-hand rotation, this propeller has more grip and cavitation resistance than the SWC3, with a hardwall cup, excellent for motor elevation, tunnels, and cavitation-prone applications. Also a good application for pontoons and single-engine catamarans. http://www.getaprop.com/content-product_info/product_id-9159/powertech_swc4_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSWC4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9159/powertech_swc4_stainless_propeller_honda.html 11.25" Diameter Powertech SRD4 All Purpose-4 Blade Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SRD4 - 11.25 diameter, the Accelerator Propeller is a 4-blade design available in right-hand rotation and 1 increments from 11-17 pitch. This is an excellent all-around blade for 50-60 horsepower Honda Outboard motors. http://www.getaprop.com/content-product_info/product_id-9157/powertech_srd4_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSRD4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9157/powertech_srd4_stainless_propeller_honda.html 10.38" Diameter Powertech SCB4 Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SCB4 - 10.375 diameter - this Honda Outboard Propeller is available in 1 increments, 10-17. This 4-blade speed propeller is right-hand rotation, and has excellent sternlift, preferred on inflatables and flat-bottomed hulls. The 4-blade design provides excellent cornering, holeshot and porpoise control http://www.getaprop.com/content-product_info/product_id-9155/powertech_scb4_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSCB4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9155/powertech_scb4_stainless_propeller_honda.html 10.38" Diameter Powertech SCB3 Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SCB3 - 10.375 diameter prop available in 1 increments, 10-17. this Honda Outboard Propeller is a 3-blade speed propeller, right-hand rotation, and has excellent sternlift, good on inflatables and flat-bottomed hulls. http://www.getaprop.com/content-product_info/product_id-9154/powertech_scb3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSCB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9154/powertech_scb3_stainless_propeller_honda.html 11.00" Diameter Powertech SCA3 Stainless Propeller fits 35-60 HP Honda Outboards... 3.50" Gearcase Thru Hub Exhaust 13 Tooth Spline OEM Rubber Hub Bushing High Polish Finish BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Powertech SCA3 - 11 diameter prop, this Honda Outboard Propeller is a larger diameter version of the SCB, to handle higher horsepower and heavier loads. The propeller is a 3-blade design with right-hand rotation, available in pitches of 13"-15". http://www.getaprop.com/content-product_info/product_id-9153/powertech_sca3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPSCA3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9153/powertech_sca3_stainless_propeller_honda.html Quicksilver Black Diamond Aluminum Propeller fits 35-60 HP Honda Outboards... Rubber Hub Bushing Thru Hub Exhaust & 13 Tooth Spline BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer http://www.getaprop.com/content-product_info/product_id-7420/quicksilver_black_diamond_propeller_honda.html http://www.getaprop.com/images/products/GAPQA copy.jpg http://www.getaprop.com/content-product_info/product_id-7420/quicksilver_black_diamond_propeller_honda.html Volvo Penta QL Propeller fits 40-75 hp Evinrude Johnson Outboards... 3.50" Gearcase 2-strokes Interchangable Hub System Requires QL Kit # 41102353 Not Included Small Gearcase, 13 Tooth Spline Thru Hub Exhaust, 2 Stroke 40 HP 2 Cyl. 1984 Thru 48 HP 87-96 50 HP 2 Cyl. 1974 Thru 55 HP 76-79 60 HP 2 Cyl. 80-85 75 HP 3 Cyl. 75-85 Sprint 86-92 Formula E 86-92 http://www.getaprop.com/content-product_info/product_id-7808/volvo_ql_propeller_e_j.html http://www.getaprop.com/images/products/newql3.JPG http://www.getaprop.com/content-product_info/product_id-7808/volvo_ql_propeller_e_j.html Solas New Saturn-3 Rubex Propeller fits 40-140 HP Evinrude Johnson Outboards... (Hi-Rake) V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7285/solas_new_saturn_3_rubex_propeller_e_j.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7285/solas_new_saturn_3_rubex_propeller_e_j.html Solas HR Titan-4 Propeller fits 40-140 HP Evinrude Johnson Outboards... (Hi-Rake) V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7287/solas_hr_titan_4_rubex_propeller_e_j.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7287/solas_hr_titan_4_rubex_propeller_e_j.html Quicksilver Lightspeed Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... V4 Gearcase Thru Hub Exhaust XHS106 Hub Kit 13 Spline 2-Stroke 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 XHS125 Hub Kit 15 Spline 4-Stroke DF90 & DF115 2001 & Newer XHS126 Hub Kit 15 Spline 4-Stroke DF140 HP 2002 and Newer http://www.getaprop.com/content-product_info/product_id-4713/quicksilver_lightspeed_propeller_e_j.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-4713/quicksilver_lightspeed_propeller_e_j.html Michigan Ballistic-3 Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... Rubber Hub Bushing V4 Gearcase-13 Tooth Spline Thru Hub Exhaust High Polish Finish 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8993/michigan_ballistic_propeller.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-8993/michigan_ballistic_propeller.html Michigan Ballistic-3 XL Stainless Propeller fits 40-140 HP Evinrude Johnson Outboards... V4 Gearcase, 13 Tooth Spline Thru Hub Exhaust Rubber Hub Bushing High Polish Finish 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8994/michigan_ballistic_xl_propeller.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-8994/michigan_ballistic_xl_propeller.html Volvo QL 4 Blade Propeller fits 40-140HP Evinrude Johnson Outboards... Interchangeable Hub System Requires QL Hub # 41102354 13 Tooth Spline V4 Gearcase, Thru Hub Exhaust 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 http://www.getaprop.com/content-product_info/product_id-7811/volvo_ql_4_propeller_e_j.html http://www.getaprop.com/images/products/ql41.JPG http://www.getaprop.com/content-product_info/product_id-7811/volvo_ql_4_propeller_e_j.html Volvo QL 3 Blade Propeller fits 40-140HP Evinrude Johnson Outboards... Interchangeable Hub System Requires QL Hub # 41102354 13 Tooth Spline V4 Gearcase, Thru Hub Exhaust 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 http://www.getaprop.com/content-product_info/product_id-7812/volvo_ql_propeller_e_j.html http://www.getaprop.com/images/products/new111.JPG http://www.getaprop.com/content-product_info/product_id-7812/volvo_ql_propeller_e_j.html Quicksilver Black Diamond Aluminum Propeller fits 40-140 HP Evinrude Johnson Outboards... 4.25" V4 Gearcase 13 Tooth Spline Thru Hub Exhaust, Rubber Hub Bushing 40,50,60,75 HP (E-TEC) 2004 and Newer 45-65 HP Commercial 1980 and Newer 50-75 HP Pleasure 2&3 Cyl. 1968 and Newer 60 HP (4 Stroke) 1998 and Newer 70 HP (4 Stroke) 1998 and Newer 90,115,130 HP (E-TEC) 2004 and Newer 85 HP 1969-80 & 1991-95 88 HP 1981-96 90 HP 1981 & Newer 100 HP 1979-80 & 1988-93 110 HP 1986-89 112 HP 1994-96 115 HP 1973 & Newer 120 HP 1986-94 125 HP 1971-72 135 HP 1973-76 140 HP 1977-94 http://www.getaprop.com/content-product_info/product_id-4698/quicksilver_black_diamond_propeller_e_j.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-4698/quicksilver_black_diamond_propeller_e_j.html Michigan Vortex Aluminum Propeller fits 25-30 HP Honda Outboards... Thru Hub Exhaust & 10 Tooth Spline BF-25 HP All Years BF-30 HO All Years Requires XHS Hub Kit # 119 (Not Included) http://www.getaprop.com/content-product_info/product_id-7407/michigan_vortex_propeller_honda.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-7407/michigan_vortex_propeller_honda.html Powertech 9.25" Diameter SWA3 Multi-Use Stainless Propeller fits 8-20HP Honda Outboards... Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust High Polish Finished 2.75" Gearcase 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9116/powertech_swa3_stainless_propeller_honda.html http://www.getaprop.com/images/products/GPswa3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9116/powertech_swa3_stainless_propeller_honda.html Powertech 9.25" Diameter SWA4 Multi-Use Stainless Propeller fits 8-20HP Honda Outboards... Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust High Polish Finished 2.75" Gearcase 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9117/powertech_swa4_stainless_propeller_honda.html http://www.getaprop.com/images/products/gpswa4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9117/powertech_swa4_stainless_propeller_honda.html Powertech 9.50" Diameter SRT4 Stainless Propeller fits 8-20HP Honda Outboards... Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust High Polish Finished 2.75" Gearcase 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9115/powertech_srt4_stainless_propeller_honda.html http://www.getaprop.com/images/products/gpsrt4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9115/powertech_srt4_stainless_propeller_honda.html Powertech 9.50" Diameter SRT3 Stainless Propeller fits 8-20HP Honda Outboards Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust High Polish Finished 2.75" Gearcase 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer http://www.getaprop.com/content-product_info/product_id-9114/powertech_srt3_stainless_propeller_honda.html http://www.getaprop.com/images/products/gpsrt3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9114/powertech_srt3_stainless_propeller_honda.html Powertech 10.00" Diameter TLR3 Multi-Use Stainless Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-9111/powertech_tlr3_propeller_mercury.html http://www.getaprop.com/images/products/GPTLR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9111/powertech_tlr3_propeller_mercury.html Powertech 9.25" Diameter SRS3 Multi-Use Stainless Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-9112/powertech_srs3_propeller_mercury.html http://www.getaprop.com/images/products/GPSRS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9112/powertech_srs3_propeller_mercury.html Powertech 10.00" Diameter SRN3 Multi-Use Stainless Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-9113/powertech_srn3_propeller_mercury.html http://www.getaprop.com/images/products/GPSRN3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9113/powertech_srn3_propeller_mercury.html Powertech 10.00" Diameter SRA4 Accelerator-4 Stainless Propeller Fits 9.9-30HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline OEM Rubber Hub Bushing M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-7579/powertech_sra4_propeller_mercury.html http://www.getaprop.com/images/products/gpsra4 copy.jpg http://www.getaprop.com/content-product_info/product_id-7579/powertech_sra4_propeller_mercury.html Powertech 10.00" Diameter SRA3 Accelerator-3 Stainless Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-7578/powertech_sra3_propeller_mercury.html http://www.getaprop.com/images/products/gpsra3 copy.jpg http://www.getaprop.com/content-product_info/product_id-7578/powertech_sra3_propeller_mercury.html Powertech 10.25" Diameter REB3 Multi-Use Stainless Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-9110/powertech_reb3_propeller_mercury.html http://www.getaprop.com/images/products/gpreb3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9110/powertech_reb3_propeller_mercury.html Powertech 10.00" Diameter ILB3 Multi-Use Stainless Propeller Fits 9.9-30 HP Mercury & Tohatsu Outboards... Thru-Hub Exhaust 10 Tooth Spline Rubber OEM Hub Bushing Highly Polished Finish M25 Hub-Mercury/Mariner 10-Spline 9.9HP Bigfoot 4-Stroke 1999-2005 15HP Bigfoot 4-Stroke 1999-2005 18HP Mercury '80-'85 20HP Mercury '86-Newer 20HP Mariner '85-Newer 25HP (Mercury 2-Stroke) '80-Newer 25HP (Mariner 2-stroke) '85-Newer 25HP (Sea Pro/Marathon) All Years TN30 Hub-Mercury/Tohatsu 10-Spline 25HP 4-Stroke 2006 & Newer (Not Bigfoot) 30HP 4-Stroke 2006 & Newer (Not Bigfoot) http://www.getaprop.com/content-product_info/product_id-9109/powertech_ilb3_propeller_mercury.html http://www.getaprop.com/images/products/GPILB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9109/powertech_ilb3_propeller_mercury.html Powertech TLR3 Multi-Use Stainless Propeller fits 20-35 HP Evinrude Johnson & Suzuki Outboards... Thru Hub Exhaust Rubber OEM Hub Bushing High Polish Finish SZ30 -10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 -14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-9108/powertech_tlr3_propeller_e_j.html http://www.getaprop.com/images/products/GPTLR3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9108/powertech_tlr3_propeller_e_j.html Powertech SRS3 Multi-Use Stainless Propeller fits 20-35 HP Evinrude Johnson & Suzuki Outboards... Thru Hub Exhaust Rubber OEM Hub Bushing High Polish Finish SZ30 -10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 -14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-9107/powertech_srs3_propeller_e_j.html http://www.getaprop.com/images/products/GPSRS3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9107/powertech_srs3_propeller_e_j.html Powertech SRN3 Multi-Use Stainless Propeller fits 20-35 HP Evinrude Johnson & Suzuki Outboards... Thru Hub Exhaust Rubber OEM Hub Bushing High Polish Finish SZ30 -10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 -14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-9106/powertech_srn3_propeller_e_j.html http://www.getaprop.com/images/products/GPSRN3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9106/powertech_srn3_propeller_e_j.html Powertech REB3 Multi-Use Stainless Propeller fits 20-35 HP Evinrude Johnson & Suzuki Outboards... Thru Hub Exhaust Rubber OEM Hub Bushing High Polish Finish SZ30 -10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 -14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-9105/powertech_reb3_propeller_e_j.html http://www.getaprop.com/images/products/gpreb3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9105/powertech_reb3_propeller_e_j.html Powertech ILB3 Multi-Use Stainless Propeller fits 20-35 HP Evinrude Johnson Outboards... Thru Hub Exhaust Rubber OEM Hub Bushing High Polish Finish SZ30 -10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 -14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-9104/powertech_ilb3_propeller_e_j.html http://www.getaprop.com/images/products/GPILB3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9104/powertech_ilb3_propeller_e_j.html Powertech SRA3 Multi-Use Stainless Propeller fits 20-35 HP Evinrude Johnson Outboards... Thru Hub Exhaust Rubber OEM Hub Bushing High Polish Finish SZ30 -10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 -14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-4582/powertech_sra3_propeller_e_j.html http://www.getaprop.com/images/products/gpsra3 copy.jpg http://www.getaprop.com/content-product_info/product_id-4582/powertech_sra3_propeller_e_j.html Powertech SRA4 Accelerator-4 Stainless Propeller fits 20-35 HP Evinrude Johnson Outboards... Thru Hub Exhaust OEM Hub Bushing High Polish Finish SZ30 - 10 Tooth Spline 25 (Four Stroke) 2004 and Newer 30 (Four Stroke) 2004 and Newer OM35 - 14 Tooth Spline 20 HP 2 Cyl, 1984-97 25 HP Commercial 1993 and Newer 25 HP 2-3 Cyl. 1984 and Newer 25 HP E-Tec 2009 and Newer 30 HP E-Tec 2009 and Newer 30 HP 2 Cyl. 1984 and Newer 35 HP 2-3 Cyl. 1976 and Newer http://www.getaprop.com/content-product_info/product_id-4588/powertech_sra4_propeller_e_j.html http://www.getaprop.com/images/products/gpsra4 copy.jpg http://www.getaprop.com/content-product_info/product_id-4588/powertech_sra4_propeller_e_j.html Powertech SWA4 Stainless Propeller fits 9.9-15 HP Suzuki Outboards... Rubber OEM Hub Bushing Included Thru Hub Exhaust & 10 Tooth Spline. Highly Polished Finish. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer http://www.getaprop.com/content-product_info/product_id-9100/powertech_swa4_stainless_propeller_suzuki.html http://www.getaprop.com/images/products/gpswa4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9100/powertech_swa4_stainless_propeller_suzuki.html Powertech SWA3 Stainless Propeller fits 9.9-15 HP Suzuki Outboards... Rubber OEM Hub Bushing Included Thru Hub Exhaust & 10 Tooth Spline. Highly Polished Finish. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer http://www.getaprop.com/content-product_info/product_id-9099/powertech_swa3_stainless_propeller_suzuki.html http://www.getaprop.com/images/products/GPswa3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9099/powertech_swa3_stainless_propeller_suzuki.html Powertech SRT4 Stainless Propeller fits 9.9-15 HP Suzuki Outboards... Rubber OEM Hub Bushing Included Thru Hub Exhaust & 10 Tooth Spline. Highly Polished Finish. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer http://www.getaprop.com/content-product_info/product_id-9098/powertech_srt4_stainless_propeller_suzuki.html http://www.getaprop.com/images/products/gpsrt4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9098/powertech_srt4_stainless_propeller_suzuki.html Powertech SRT3 Stainless Propeller fits 9.9-15 HP Suzuki Outboards... Rubber OEM Hub Bushing Included Thru Hub Exhaust & 10 Tooth Spline. Highly Polished Finish. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer http://www.getaprop.com/content-product_info/product_id-7447/powertech_srt3_stainless_propeller_suzuki.html http://www.getaprop.com/images/products/gpsrt3 copy.jpg http://www.getaprop.com/content-product_info/product_id-7447/powertech_srt3_stainless_propeller_suzuki.html Michigan Match Aluminum Propeller fits Nissan/Tohatsu Outboards... Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer http://www.getaprop.com/content-product_info/product_id-7366/michigan_match_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/mta.JPG http://www.getaprop.com/content-product_info/product_id-7366/michigan_match_propeller_nissan_tohatsu.html Powertech SWA4 Multi Use Stainless Propeller fits 6-18 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline Highly Polished Finish 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer http://www.getaprop.com/content-product_info/product_id-9095/powertech_swa4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/gpswa4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9095/powertech_swa4_propeller_nissan_tohatsu.html Powertech SWA3 Multi Use Stainless Propeller fits 6-18 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline Highly Polished Finish 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer http://www.getaprop.com/content-product_info/product_id-8857/powertech_swa3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/GPswa3 copy.jpg http://www.getaprop.com/content-product_info/product_id-8857/powertech_swa3_propeller_nissan_tohatsu.html Powertech SRT4 Multi Use Stainless Propeller fits 6-18 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline Highly Polished Finish 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer http://www.getaprop.com/content-product_info/product_id-9097/powertech_srt4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/gpsrt4 copy.jpg http://www.getaprop.com/content-product_info/product_id-9097/powertech_srt4_propeller_nissan_tohatsu.html Powertech SRT3 Multi Use Stainless Propeller fits 6-18 HP Nissan Tohatsu Outboards... Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline Highly Polished Finish 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer http://www.getaprop.com/content-product_info/product_id-9096/powertech_srt3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/gpsrt3 copy.jpg http://www.getaprop.com/content-product_info/product_id-9096/powertech_srt3_propeller_nissan_tohatsu.html 9 1/4" RH 3 Blade Stainless Solas Saturn Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer Rubber Hub Bushing Included The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7450/solas_saturn_3_propeller_suzuki.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7450/solas_saturn_3_propeller_suzuki.html 10" RH 4 Blade High Thrust Aluminum Solas Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer Rubber Hub Bushing Included SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7451/solas_high_thrust_4_propeller_suzuki.html http://www.getaprop.com/images/products/Untitled.jpg http://www.getaprop.com/content-product_info/product_id-7451/solas_high_thrust_4_propeller_suzuki.html 9 1/4" RH 4 Blade Aluminum Solas Amita Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer Rubber Hub Bushing Included SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7449/solas_amita_4_propeller_suzuki.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7449/solas_amita_4_propeller_suzuki.html 9 1/4" RH 3 Blade Aluminum Solas Amita-3 Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer Rubber Hub Bushing Included SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7448/solas_amita_3_propeller_suzuki.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7448/solas_amita_3_propeller_suzuki.html Michigan Match Aluminum Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-7445/michigan_match_propeller_suzuki.html http://www.getaprop.com/images/products/mta[1][1].jpg http://www.getaprop.com/content-product_info/product_id-7445/michigan_match_propeller_suzuki.html 9 1/4" RH 3 Blade Stainless Solas Saturn Propeller fits Nissan Tohatsu Outboards... 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7370/solas_saturn_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7370/solas_saturn_3_propeller_nissan_tohatsu.html 10" RH 4 Blade High Thrust Aluminum Solas Amita Propeller... Excellent choice for Heavy load and Saildrive applications... 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7369/solas_high_thrust_4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/p031313sq01[1].jpg http://www.getaprop.com/content-product_info/product_id-7369/solas_high_thrust_4_propeller_nissan_tohatsu.html 9 1/4" RH 4 Blade Aluminum Solas Amita Propeller fits Nissan Tohatsu Outboards... 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7368/solas_amita_4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7368/solas_amita_4_propeller_nissan_tohatsu.html 9 1/4" RH 3 Blade Aluminum Solas Amita-3 Propeller fits Nissan Tohatsu Outboards... 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7367/solas_amita_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7367/solas_amita_3_propeller_nissan_tohatsu.html 9 1/4" RH 3 Blade Stainless Solas Saturn Propeller fits 9.9-20 HP Honda Outboards... 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7406/solas_saturn_3_propeller_honda.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7406/solas_saturn_3_propeller_honda.html 9" Prop Guard (Safety Yellow) Fits 9.9hp to 20hp... For Bigfoot and High Thrust use 11" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-7207/prop_guard_9_yellow.html http://www.getaprop.com/images/products/9yellow.jpg http://www.getaprop.com/content-product_info/product_id-7207/prop_guard_9_yellow.html 9" Prop Guard (BLACK) Fits 9.9hp to 20hp... For Bigfoot and High Thrust use 11" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-8865/prop_guard_9_black.html http://www.getaprop.com/images/products/9B.JPG http://www.getaprop.com/content-product_info/product_id-8865/prop_guard_9_black.html 16" XP Prop Guard (Safety White) Fits 110hp to 350hp... Also fits all Sterndrives and Duo Prop with optional Prop Guard bracket. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-7211/prop_guard_16_white.html http://www.getaprop.com/images/products/16white.jpg http://www.getaprop.com/content-product_info/product_id-7211/prop_guard_16_white.html 16" XP Prop Guard (Black) Fits 110hp to 350hp... Also fits all Sterndrives and Duo Prop with optional Prop Guard bracket. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-9003/prop_guard_16_black.html http://www.getaprop.com/images/products/16b.JPG http://www.getaprop.com/content-product_info/product_id-9003/prop_guard_16_black.html 14" XP Prop Guard (Safety Red) Fits 70hp to 100hp... For Bigfoot and High Thrust use 16" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-7210/prop_guard_14_red.html http://www.getaprop.com/images/products/14red.jpg http://www.getaprop.com/content-product_info/product_id-7210/prop_guard_14_red.html 14" XP Prop Guard (BLACK) Fits 70hp to 100hp... For Bigfoot and High Thrust use 16" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-8866/prop_guard_14_black.html http://www.getaprop.com/images/products/14b.JPG http://www.getaprop.com/content-product_info/product_id-8866/prop_guard_14_black.html 13" XP Prop Guard (Safety Blue) Fits 40hp to 65hp... For Bigfoot and High Thrust use 14" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-7209/prop_guard_13_blue.html http://www.getaprop.com/images/products/13blue.jpg http://www.getaprop.com/content-product_info/product_id-7209/prop_guard_13_blue.html 13" XP Prop Guard (Black) Fits 40hp to 65hp... For Bigfoot and High Thrust use 14" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-9002/prop_guard_13_black.html http://www.getaprop.com/images/products/13B.JPG http://www.getaprop.com/content-product_info/product_id-9002/prop_guard_13_black.html 11" XP Prop Guard (Safety Orange) Fits 25hp to 35hp... For Bigfoot and High Thrust use 13" Prop Guard. Note - Prop Guard not recommended for speeds over 30mph. Test data indicates outstanding gain in overall Boat Performance,with the Propeller Guard installed... 1) Significant greater thrust (Towing Skiers etc.) 2) Higher cruising at minimum motor RPM RESULTING IN FUEL SAVINGS. 3) Significant directional steering control. 4) Outstanding boat leveling trim control. 5) Complete Propeller protection. (Water Skier safety) 6) Significant reduction of Propeller wake (Preventing wake nuisance for boats nearby and preventing wake damage to river and channel banks) 7) The vortex vanes between the outer and inner guard nozzle create a similer effect as counter rotating propeller arrangements, canceling the torque reaction, and the Propeller vortex of a single Propeller installation (Simple application for submarines and torpedos) http://www.getaprop.com/content-product_info/product_id-7208/prop_guard_11_orange.html http://www.getaprop.com/images/products/11org.jpg http://www.getaprop.com/content-product_info/product_id-7208/prop_guard_11_orange.html 10" RH 4 Blade High Thrust Aluminum Solas Amita Propeller... Excellent choice for Heavy load and Saildrive applications... 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust. SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7405/solas_high_thrust_4_propeller_honda.html http://www.getaprop.com/images/products/p031313sq01[1].jpg http://www.getaprop.com/content-product_info/product_id-7405/solas_high_thrust_4_propeller_honda.html 9 1/4" RH 4 Blade Aluminum Solas Amita Propeller... 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust. SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7404/solas_amita_4_propeller_honda.html http://www.getaprop.com/images/products/amita1.JPG http://www.getaprop.com/content-product_info/product_id-7404/solas_amita_4_propeller_honda.html 9 1/4" RH 3 Blade Aluminum Solas Amita-3 Propeller... 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust. SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7403/solas_amita_3_propeller_honda.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7403/solas_amita_3_propeller_honda.html Powertech Aluminum Propeller fits 9.9-20 HP Honda Outboards... Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer http://www.getaprop.com/content-product_info/product_id-8693/powertech_aluminum_propeller_honda.html http://www.getaprop.com/images/products/PYAAYH.jpg http://www.getaprop.com/content-product_info/product_id-8693/powertech_aluminum_propeller_honda.html 1 1/8" Max. Shaft Diameter Brute Propeller Puller W/ Shaft Saver Bolt. (3/4 - 1 1/8) Shaft diameter tool only is the same propeller puller used in the PPF-101 Kit. Clearance required between propeller hub and strut is 1/4 minimum http://www.getaprop.com/content-product_info/product_id-1236/pro_pull_102.html http://www.getaprop.com/images/products/ppf102_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1236/pro_pull_102.html Power Tech Propeller Puller is a precision tool essential to removeing any ski boat propeller. Cast in stainless steel to last the life of your boat. The Power Tech Puller is able to pull any 3 or 4 blade ski boat prop with a 3/4" or 1-1/8'' prop shaft. http://www.getaprop.com/content-product_info/product_id-8739/pt_propeller_puller.html http://www.getaprop.com/images/products/ptpuller11 copy.jpg http://www.getaprop.com/content-product_info/product_id-8739/pt_propeller_puller.html Quicksilver Black Diamond Aluminum Propeller fits 9.9-15 HP Force Outboards... 9.9 HP 1996 & Newer 15 HP 1996 & Newer Rubber Hub Bushing 8-Spline http://www.getaprop.com/content-product_info/product_id-4826/quicksilver_black_diamond_propeller_force.html http://www.getaprop.com/images/products/qass[1].jpg http://www.getaprop.com/content-product_info/product_id-4826/quicksilver_black_diamond_propeller_force.html 9.25 RH 10 Power Tech Aluminum Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. Rubber OEM Hub Bushing Included DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer http://www.getaprop.com/content-product_info/product_id-8696/power_tech_propeller_suzuki.html http://www.getaprop.com/images/products/PTAASZ.jpg http://www.getaprop.com/content-product_info/product_id-8696/power_tech_propeller_suzuki.html Power Tech Aluminum Propeller fits Nissan/Tohatsu Outboards... Rubber Hub Bushing Included. Thru Hub Exhaust 14 Tooth Spline 9.9 HP 1984 and Newer 9.9 HP (Four Stroke) 2000 and Newer 12 HP 1985-88 15 HP (Four Stroke) 2000 and Newer 15-18 HP 1985 and Newer 18 HP (Four Stroke) 2001 and Newer http://www.getaprop.com/content-product_info/product_id-8695/power_tech_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/PTAYTN.jpg http://www.getaprop.com/content-product_info/product_id-8695/power_tech_propeller_nissan_tohatsu.html 79840 Yamaha Propeller Wrench Fits 1 1/16" Nut... Designed to fit the dimensions of your Yamaha V4 & V6 outboard prop nut. Has a 9/16" square opening on reverse side to open garboard drain plugs. http://www.getaprop.com/content-product_info/product_id-3147/yamaha_propeller_wrench.html http://www.getaprop.com/images/products/YAMWRENCH.JPG http://www.getaprop.com/content-product_info/product_id-3147/yamaha_propeller_wrench.html 859046Q4-Propeller Wrench Fits 1-1/16" Nut... Mercury/Mariner 75-250 Hp Sterndrives, Alpha, Bravo I Yamaha 50-250 Hp Nissan/Tohatsu70-140 Hp Suzuki DF60,70,DT75,85-225 Hp Honda75-225 Hp Johnson/Evinrude 45 to 300HP OMC Cobra 800 & Volvo SX Drives http://www.getaprop.com/content-product_info/product_id-7098/floating_propeller_wrench.html http://www.getaprop.com/images/products/yelprop[1].jpg http://www.getaprop.com/content-product_info/product_id-7098/floating_propeller_wrench.html 41100699 LH Propeller for models BP800, BP900 Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-2012/volvo_ql_bp800_bp900_lh_propeller.html http://www.getaprop.com/images/products/QL-07-P699[1].jpg http://www.getaprop.com/content-product_info/product_id-2012/volvo_ql_bp800_bp900_lh_propeller.html Click on Catagory above for Spurs Line Cutters SAE or Metric. http://www.getaprop.com/content-product_info/product_id-7686/spurs_line_cutters.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-7686/spurs_line_cutters.html Click on Catagory above for Shaft Shark Line Cutters SAE or Metric... http://www.getaprop.com/content-product_info/product_id-8266/shaft_shark_line_cutters.html http://www.getaprop.com/images/products/shark1[1][1].jpg http://www.getaprop.com/content-product_info/product_id-8266/shaft_shark_line_cutters.html Shaft Shark 900 single unit fits shaft diameters 3 1/2" thru 4 1/2" Cutter Outside Diameter: 9.00" Cutter Hub Diameter: 6.685" Cutter Width: 1.50" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. Available as a single piece unit for larger shafts. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-8265/shaft_shark_900_line_cutters.html http://www.getaprop.com/images/products/SS.JPG http://www.getaprop.com/content-product_info/product_id-8265/shaft_shark_900_line_cutters.html Shaft Shark 700 single unit fits shaft diameters 2 1/2" thru 3" Cutter Outside Diameter: 7.00" Cutter Hub Diameter: 5.05" Cutter Width: 1.25" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. Available as a single piece unit for larger shafts. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-8264/shaft_shark_700_line_cutters.html http://www.getaprop.com/images/products/SS.JPG http://www.getaprop.com/content-product_info/product_id-8264/shaft_shark_700_line_cutters.html Shaft Shark 700 split unit fits shaft diameters 2 3/4" thru 3 1/4". Cutter Outside Diameter: 7.00" Cutter Hub Diameter: 5.05" Cutter Width: 1.25" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. It is available as a split 2 x piece unit for quick and simple installation. Also available as a single piece unit for larger shafts. Models are split units and so installation is simple and quick. No need to remove the propeller to install. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-9083/shaft_shark_700_line_cutters.html http://www.getaprop.com/images/products/shark1[1].jpg http://www.getaprop.com/content-product_info/product_id-9083/shaft_shark_700_line_cutters.html Shaft Shark 600 split unit fits shaft diameters 2" thru 2 3/4" Cutter Outside Diameter: 5.875" Cutter Hub Diameter: 4.45" Cutter Width: 1.25" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. It is available as a split 2 x piece unit for quick and simple installation. Also available as a single piece unit for larger shafts. Models are split units and so installation is simple and quick. No need to remove the propeller to install. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-8263/shaft_shark_600_line_cutters.html http://www.getaprop.com/images/products/shark1[1].jpg http://www.getaprop.com/content-product_info/product_id-8263/shaft_shark_600_line_cutters.html Shaft Shark 500 split unit fits shaft diameters 1 1/4" thru 2 1/2" and 40-50mm. Cutter Outside Diameter: 4.75" Cutter Hub Diameter: 3.625" Cutter Width: .82" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. It is available as a split 2 x piece unit for quick and simple installation. Also available as a single piece unit for larger shafts. Models are split units and so installation is simple and quick. No need to remove the propeller to install. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-8262/shaft_shark_500_line_cutters.html http://www.getaprop.com/images/products/shark1[1].jpg http://www.getaprop.com/content-product_info/product_id-8262/shaft_shark_500_line_cutters.html Shaft Shark 400 split unit fits shaft diameters 1 1/4" thru 1 3/4" and 30-40mm. Cutter Outside Diameter: 3.98" Cutter Hub Diameter: 3.00" Cutter Width: .72" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. It is available as a split 2 x piece unit for quick and simple installation. Also available as a single piece unit for larger shafts. Models are split units and so installation is simple and quick. No need to remove the propeller to install. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-8261/shaft_shark_400_line_cutters.html http://www.getaprop.com/images/products/shark1[1].jpg http://www.getaprop.com/content-product_info/product_id-8261/shaft_shark_400_line_cutters.html Shaft Shark 300 split unit fits shaft diameters 1" thru 1 1/4" and 25-30mm. Cutter Outside Diameter: 3.20" Cutter Hub Diameter: 2.25" Cutter Width: .72" The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. It is available as a split 2 x piece unit for quick and simple installation. Also available as a single piece unit for larger shafts. Models are split units and so installation is simple and quick. No need to remove the propeller to install. How do I choose the right model? Supply the shaft diameter on your boat either standard SAE (inch) or metric. Supply the diameter of the fwd end of your propeller hub. http://www.getaprop.com/content-product_info/product_id-8260/shaft_shark_300_line_cutters.html http://www.getaprop.com/images/products/shark1[1].jpg http://www.getaprop.com/content-product_info/product_id-8260/shaft_shark_300_line_cutters.html 20" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 1" thru 1 1/2" & Metric tapers 25mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7793/flex_o_fold_sailboat_propeller_20.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7793/flex_o_fold_sailboat_propeller_20.html 20" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 1" thru 1 1/2" & Metric tapers 25mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7799/flex_o_fold_sailboat_propeller_20.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7799/flex_o_fold_sailboat_propeller_20.html 18" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7792/flex_o_fold_sailboat_propeller_18.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7792/flex_o_fold_sailboat_propeller_18.html 18" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7798/flex_o_fold_sailboat_propeller_18.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7798/flex_o_fold_sailboat_propeller_18.html 17" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7791/flex_o_fold_sailboat_propeller_17.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7791/flex_o_fold_sailboat_propeller_17.html 17" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7797/flex_o_fold_sailboat_propeller_17.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7797/flex_o_fold_sailboat_propeller_17.html 16" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7790/flex_o_fold_sailboat_propeller_16.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7790/flex_o_fold_sailboat_propeller_16.html 16" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7796/flex_o_fold_sailboat_propeller_16.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7796/flex_o_fold_sailboat_propeller_16.html 15" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7789/flex_o_fold_sailboat_propeller_15.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7789/flex_o_fold_sailboat_propeller_15.html 15" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7795/flex_o_fold_sailboat_propeller_15.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7795/flex_o_fold_sailboat_propeller_15.html 14" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7788/flex_o_fold_sailboat_propeller_14.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7788/flex_o_fold_sailboat_propeller_14.html 14" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7794/flex_o_fold_sailboat_propeller_14.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7794/flex_o_fold_sailboat_propeller_14.html 13" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7787/flex_o_fold_sailboat_propeller_13.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7787/flex_o_fold_sailboat_propeller_13.html 12" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing The Flexofold Propeller does work with a hydraulic transmission. However, to get the prop to fold, you have to follow a simple procedure. The objective is to stop the rotation of the prop which is easily done with a mechanical transmission by putting the gear in reverse. With the mechanical transmission, the clutch stays engaged, and the prop cant turn. With the hydraulic transmission, the clutches stay engaged only as long as there is hydraulic pressure being produced by the turning engine. When the engine is turned off, the clutches disengage and the prop is free to spin no matter where the transmission is. With the blades open and the boat moving forward, centrifugal force will keep the blades open unless you can stop the rotation for a moment while moving forward, forcing the blades to fold. Once folded, the blades will not reopen without rotating the engine again. To cause the Flexofold to fold with a hydraulic transmission, follow the steps below: 1. With the boat moving forward and the motor running in forward (the sails can be up, too) idle down and shift to reverse. 2. Immediately after putting the engine in reverse, shut the engine down. By putting the engine in reverse, you stop the rotation in the forward direction and the blades will fold because you are still going forward. After the engine is shut down, the blades remain folded until you restart the engine and put it in gear. http://www.getaprop.com/content-product_info/product_id-7785/flex_o_fold_sailboat_propeller_12.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7785/flex_o_fold_sailboat_propeller_12.html 18" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7803/flex_o_fold_racing_propeller_18.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7803/flex_o_fold_racing_propeller_18.html 17" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7802/flex_o_fold_racing_propeller_17.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7802/flex_o_fold_racing_propeller_17.html 16" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7801/flex_o_fold_racing_propeller_16.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7801/flex_o_fold_racing_propeller_16.html 15" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7800/flex_o_fold_racing_propeller_15.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7800/flex_o_fold_racing_propeller_15.html CONCORD SERIES KX-CD Fits 2007 Kawasaki 1498cc PWC...(10/16) 2007 ULTRA LX Engine CC: 1498 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-8025/solas_impeller_kawasaki_kx_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8025/solas_impeller_kawasaki_kx_cd.html Michigan Apollo-4 Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7653/michigan_apollo_4_propeller_yamaha.html http://www.getaprop.com/images/products/apollo2[1].jpg http://www.getaprop.com/content-product_info/product_id-7653/michigan_apollo_4_propeller_yamaha.html Michigan Apollo 4 Blade Stainless Propeller Fits Volvo Penta SX Cobra Drives... XHS Hub Kit 105 (Not Included) High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-6761/michigan_apollo_4_propeller_volvo_sx.html http://www.getaprop.com/images/products/apollo2[1].jpg http://www.getaprop.com/content-product_info/product_id-6761/michigan_apollo_4_propeller_volvo_sx.html Michigan Apollo-4 Stainless PropellerFits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller http://www.getaprop.com/content-product_info/product_id-7638/michigan_apollo_4_propeller_omc800.html http://www.getaprop.com/images/products/apollo2[1].jpg http://www.getaprop.com/content-product_info/product_id-7638/michigan_apollo_4_propeller_omc800.html Apollo 4 Blade Stainless Propellers fits Alpha & Bravo 1 Drives... XHS Hub Kit 102 Not Included High-Performance - CAD designed Blade Geometry. Highly Polished - High Strength Stainless Steel Alloy Limited Lifetime Warranty XHS and Flo-Torq II Hub System Compatible Michigan Wheels Xchangeable Hub System absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit. XHS is also designed to be interchangeable with Mercurys Flo-Torq II hub system, potentially saving you money when replacing or upgrading your propeller. http://www.getaprop.com/content-product_info/product_id-7521/michigan_apollo_4_propeller.html http://www.getaprop.com/images/products/apollo2[1][1].jpg http://www.getaprop.com/content-product_info/product_id-7521/michigan_apollo_4_propeller.html 18" Flex-O-Fold Racing 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. If you are a serious racer, youll want the Racing Flexofold. Depending on size and speed, the drag will be 20 to 30% less than the Standard Flexofold. At the same time, the powering performance of the Racing Propeller will be only slightly less than the Standard Prop. We achieve this drag improvement by streamlining the blades and reducing the gap between them when folded. Yet, we still maintain much of the powerful shape that is responsible for the Standard Props efficiency under power. The Flexofold Racing Propellers are used as standard equipment on Farr 40s, Farr 36s, ID 35s and many other offshore one-designs. The Sydney 40 that won the 2001 Transpac was equipped with a Flexofold Racing Prop. And, the Swan 45, the high performance rocket ship from Nautor, has a Flexofold Racing Propeller as standard equipment. The Racing Flexofold is available in 15, 16, 17 and 18 inch sizes, in both right and left hand, with several pitches in each diameter. It can be mounted on tapered shafts or sail drives. http://www.getaprop.com/content-product_info/product_id-7804/flex_o_fold_racing_propeller_18.html http://www.getaprop.com/images/products/flexracing.jpg http://www.getaprop.com/content-product_info/product_id-7804/flex_o_fold_racing_propeller_18.html 12" Flex-O-Fold 2 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing http://www.getaprop.com/content-product_info/product_id-7786/flex_o_fold_sailboat_propeller_12.html http://www.getaprop.com/images/products/flex2.jpg http://www.getaprop.com/content-product_info/product_id-7786/flex_o_fold_sailboat_propeller_12.html 17" Flex-O-Fold 3 Blade folding Propeller fits Saildrives & Shaft diameters 3/4" thru 1 1/4" & Metric tapers 20mm-40mm <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> PRICES FOB DENMARK - AIR FREIGHT SURCHARGE WILL APPLY Please note: Returns / Exchanges on Flexofold Propellers are only valid when vessel data is reviewed by Getaprop and Flexofold prior to purchase. Expect delivery within 7-10 Day's The Flexofold Folding Sailboat Propeller is the most efficient, lowest drag propeller you can buy. This claim is based on independent tests conducted over the past several years and reinforced today by sailboat builders and owners around the world. Flexofold folding propellers deliver: Maximum performance under power* Superior performance in reverse* Lowest drag under sail* 2 and 3-blade design Unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives as well as shafts Easy pitch changes Patented, twin helical gear design for reliable operation Patented, locking screws Fair pricing http://www.getaprop.com/content-product_info/product_id-7805/flex_o_fold_sailboat_propeller_17.html http://www.getaprop.com/images/products/flex3.jpg http://www.getaprop.com/content-product_info/product_id-7805/flex_o_fold_sailboat_propeller_17.html SPECIAL ORDER PROPELLER: Manufactured using the latest robotic and CNC processes, the VEEMSurf is of the highest quality and accuracy attainable, and is further improved with dynamic balancing at VEEM's NATA. approved balancing facility. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_construction.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> http://www.getaprop.com/content-product_info/product_id-8885/veemultraskew_propeller.html http://www.getaprop.com/images/products/srtsty.JPG http://www.getaprop.com/content-product_info/product_id-8885/veemultraskew_propeller.html 24" LH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-9087/nakashima_hi_skew_nibral_propeller_24.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-9087/nakashima_hi_skew_nibral_propeller_24.html 24" RH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-9086/nakashima_hi_skew_nibral_propeller_24.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-9086/nakashima_hi_skew_nibral_propeller_24.html 20 LH 22 X 4 Blade 1 1/2" Bore Ni-Bral 38' Bayliner Yacht Propeller... EAR= 0.60 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 4 1/2" (Full Taper) Bore: 1 1/2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6539/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6539/nakashima_hi_skew_nibral_propeller_20.html 20 RH 22 X 4 Blade 1 1/2" Bore Ni-Bral 38' Bayliner Yacht Propeller... EAR= 0.60 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 4 1/2" (Full Taper) Bore: 1 1/2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6538/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6538/nakashima_hi_skew_nibral_propeller_20.html 20 LH 21.5 X 4 Blade 1 1/2" Bore Ni-Bral 38' Bayliner Yacht Propeller... EAR= 0.60 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 4 1/2" (Full Taper) Bore: 1 1/2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6537/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6537/nakashima_hi_skew_nibral_propeller_20.html 20 RH 21.5 X 4 Blade 1 1/2" Bore Ni-Bral 38' Bayliner Yacht Propeller... EAR= 0.60 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 4 1/2" (Full Taper) Bore: 1 1/2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6536/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6536/nakashima_hi_skew_nibral_propeller_20.html 20 LH 21 X 4 Blade 1 1/2" Bore Ni-Bral 38' Bayliner Yacht Propeller... EAR= 0.60 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 4 1/2"(Full Taper) Bore: 1 1/2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6535/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6535/nakashima_hi_skew_nibral_propeller_20.html 20 RH 21 X 4 Blade 1 1/2" Bore Ni-Bral 38' Bayliner Yacht Propeller... EAR= 0.60 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 4 1/2" (Full Taper) Bore: 1 1/2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6534/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6534/nakashima_hi_skew_nibral_propeller_20.html 17 LH 18 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4" (Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6533/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6533/nakashima_hi_skew_nibral_propeller_17.html 17 RH 18 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4" (Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6532/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6532/nakashima_hi_skew_nibral_propeller_17.html 17 LH 17.5 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6531/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6531/nakashima_hi_skew_nibral_propeller_17.html 17 RH 17.5 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6530/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6530/nakashima_hi_skew_nibral_propeller_17.html 17 LH 17 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6529/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6529/nakashima_hi_skew_nibral_propeller_17.html 17 RH 17 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6528/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6528/nakashima_hi_skew_nibral_propeller_17.html 17 LH 16.5 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6527/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6527/nakashima_hi_skew_nibral_propeller_17.html 17 RH 16.5 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6526/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6526/nakashima_hi_skew_nibral_propeller_17.html 17 LH 16 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6525/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-6525/nakashima_hi_skew_nibral_propeller_17.html 17 RH 16 X 4 Blade 1 1/4" Bore Ni-Bral 32' Bayliner Yacht Propeller... EAR= 0.60 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 3/4"(Full Taper) Bore: 1 1/4" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6524/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-6524/nakashima_hi_skew_nibral_propeller_17.html 22 RH 23 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 32 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6541/nakashima_type_propeller_22_dia.html http://www.getaprop.com/images/products/nakLH.jpg http://www.getaprop.com/content-product_info/product_id-6541/nakashima_type_propeller_22_dia.html 17" LH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/4" SAE Standard Taper & Keyway Full taper Hub Length 3 3/4" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8659/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8659/nakashima_hi_skew_nibral_propeller_17.html 17" RH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/4" SAE Standard Taper & Keyway Full taper Hub Length 3 3/4" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8658/nakashima_hi_skew_nibral_propeller_17.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8658/nakashima_hi_skew_nibral_propeller_17.html 7/8" to 3/4" Nylon Bore Reducer Bushing... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1186/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1186/anchor_propeller_bushings_nylon.html 1" TO 7/8" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1188/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1188/anchor_propeller_bushings_nylon.html 1" TO 3/4" Nylon Bore Reducer Bushing... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1187/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1187/anchor_propeller_bushings_nylon.html 2" TO 1 3/4" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1200/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1200/anchor_propeller_bushings_nylon.html 1 1/8" TO 7/8" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1189/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1189/anchor_propeller_bushings_nylon.html 1 1/8" TO 1" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1190/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1190/anchor_propeller_bushings_nylon.html 2 1/4" TO 2" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1201/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1201/anchor_propeller_bushings_nylon.html 1 1/4" TO 1" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1191/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1191/anchor_propeller_bushings_nylon.html 2 1/2" TO 2" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1202/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1202/anchor_propeller_bushings_nylon.html 1 1/4" TO 1 1/8" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1192/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1192/anchor_propeller_bushings_nylon.html 1 3/8" TO 1/8" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1193/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1193/anchor_propeller_bushings_nylon.html 1 1/2" TO 1 1/4" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1195/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1195/anchor_propeller_bushings_nylon.html 1 1/2" TO 1 3/8" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1196/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1196/anchor_propeller_bushings_nylon.html 1 3/4" TO 1 3/8" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1197/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1197/anchor_propeller_bushings_nylon.html 2 1/2" TO 2 1/4" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1203/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1203/anchor_propeller_bushings_nylon.html 1 3/4" to 1 1/2" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1198/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1198/anchor_propeller_bushings_nylon.html 1 3/8" TO 1 1/4" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1194/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1194/anchor_propeller_bushings_nylon.html 2" to 1 1/2" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1199/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-1199/anchor_propeller_bushings_nylon.html 1-1/2" to 35mm Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1455/anchor_propeller_bushing_bronze_metric.html http://www.getaprop.com/images/products/78235[1][1].jpg http://www.getaprop.com/content-product_info/product_id-1455/anchor_propeller_bushing_bronze_metric.html 1-3/8" to 30mm Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1454/anchor_propeller_bushing_bronze_metric.html http://www.getaprop.com/images/products/78235[1][1].jpg http://www.getaprop.com/content-product_info/product_id-1454/anchor_propeller_bushing_bronze_metric.html 1-1/4" to 30mm Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1453/anchor_propeller_bushing_bronze_metric.html http://www.getaprop.com/images/products/78235[1][1].jpg http://www.getaprop.com/content-product_info/product_id-1453/anchor_propeller_bushing_bronze_metric.html 1-1/8" to 25mm Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1452/anchor_propeller_bushing_bronze_metric.html http://www.getaprop.com/images/products/78235[1][1].jpg http://www.getaprop.com/content-product_info/product_id-1452/anchor_propeller_bushing_bronze_metric.html 5 to 4-1/2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1469/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1469/anchor_propeller_bushing_bronze.html 5 to 4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1468/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1468/anchor_propeller_bushing_bronze.html 4-1/2 to 4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1467/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1467/anchor_propeller_bushing_bronze.html 4 to 3-1/2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1466/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1466/anchor_propeller_bushing_bronze.html 4 to 3" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1465/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1465/anchor_propeller_bushing_bronze.html 3-1/2 to 3-1/4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1464/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1464/anchor_propeller_bushing_bronze.html 3-1/2 to 2-1/2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1462/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1462/anchor_propeller_bushing_bronze.html 3 to 2-3/4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1461/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1461/anchor_propeller_bushing_bronze.html 3 to 2-1/2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1460/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1460/anchor_propeller_bushing_bronze.html 2-3/4 to 2-1/2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1459/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1459/anchor_propeller_bushing_bronze.html 2-1/2 to 2-1/4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1458/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1458/anchor_propeller_bushing_bronze.html 2-1/2 to 2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1457/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1457/anchor_propeller_bushing_bronze.html 2-1/4 to 2" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1456/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1456/anchor_propeller_bushing_bronze.html 2" TO 1 3/4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1219/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1219/anchor_propeller_bushing_bronze.html 2" TO 1 1/2" Bronze Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1218/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1218/anchor_propeller_bushing_bronze.html 1 1/4" TO 1 1/8" Bronze Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1211/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1211/anchor_propeller_bushing_bronze.html 1 1/2" TO 1 3/8" Bronze Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1215/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1215/anchor_propeller_bushing_bronze.html 1 3/8" TO 1 1/4" Bronze Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1213/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1213/anchor_propeller_bushing_bronze.html 1 3/8" TO 1/1/8" Bronze Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1212/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1212/anchor_propeller_bushing_bronze.html 1 1/8" TO 1" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1209/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1209/anchor_propeller_bushing_bronze.html 1 3/4" TO 1 3/8" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1216/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1216/anchor_propeller_bushing_bronze.html 1 3/4" TO 1 1/2" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1217/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1217/anchor_propeller_bushing_bronze.html 1 1/4" TO 1" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1210/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1210/anchor_propeller_bushing_bronze.html 1" TO 3/4" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1206/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1206/anchor_propeller_bushing_bronze.html 1 1/8 to 7/8" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1208/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1208/anchor_propeller_bushing_bronze.html 1" TO 7/8" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1207/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1207/anchor_propeller_bushing_bronze.html 7/8" TO 3/4" Bronze Propeller Bore Reducer A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1205/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1205/anchor_propeller_bushing_bronze.html 1 1/2" TO 1 1/4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-1214/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-1214/anchor_propeller_bushing_bronze.html 2" to 1 1/2" Nylon Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-6417/anchor_propeller_bushings_nylon.html http://www.getaprop.com/images/products/nbr[1].jpg http://www.getaprop.com/content-product_info/product_id-6417/anchor_propeller_bushings_nylon.html 1-1/8" to 25mm Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-6416/anchor_propeller_bushing_bronze_metric.html http://www.getaprop.com/images/products/78235[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6416/anchor_propeller_bushing_bronze_metric.html 1 1/2" TO 1 1/4" Bronze Propeller Bore Reducer... A stepped down key is provided that will accommodate the propeller bushing. http://www.getaprop.com/content-product_info/product_id-6415/anchor_propeller_bushing_bronze.html http://www.getaprop.com/images/products/78235[1].jpg http://www.getaprop.com/content-product_info/product_id-6415/anchor_propeller_bushing_bronze.html Volvo Penta Type "XDP" Duo-Prop Set Composite Propeller for Volvo Penta XDP/DPS... <a href="http://www.getaprop.com/content-product_info/product_id-9085/volvo_penta_xdp_duo_prop_wrench.html" target="blank" >885127 XDP Installation Tool</a> Volvo Penta's new X-Series Composite DuoProp Propeller is perfect for Volvo Penta 4.3L and 5.0L gasoline engines with XDP or DPS DuoProp Sterndrive. This propeller features a tensile strength 10 to 15% greater than aluminum, with performance to match. This composite material will not corrode or suffer cavitation burning the way stainless and aluminum props can. Composite construction also provides the ability to change blades too, dramatically reducing repair time and costs. By changing blade sizes, you can customize your boat for the day s specific activity - a lower pitch for waterskiing, and a higher pitch for cruising. Different sizes are provided for different needs. The X Series Volvo Dup Prop can be used in place of the "D" & "F" series but NOT "A", "B" or "C" Series. http://www.getaprop.com/content-product_info/product_id-7853/volvo_penta_xdp_dps_set.html http://www.getaprop.com/images/products/duoprop_propeller[1].jpg http://www.getaprop.com/content-product_info/product_id-7853/volvo_penta_xdp_dps_set.html 885127 - Volvo Penta Type "XDP" Duo-Prop Composit Propeller installation tool for Volvo Penta XDP/DPS... To help you remove and remount composite duoprops.This special tool helps you remove the propeller hubs. http://www.getaprop.com/content-product_info/product_id-9085/volvo_penta_xdp_duo_prop_wrench.html http://www.getaprop.com/images/products/vpw.jpg http://www.getaprop.com/content-product_info/product_id-9085/volvo_penta_xdp_duo_prop_wrench.html Vetus Propeller 6 blade.... New Style Fits 125/130/160 kgf VETUS uses plastic propellers, which cannot corrode. Owing to their low weight, the maximum thrust force is obtained very quickly and with minimum use of energy. The propeller blades are shaped in such a way, that the thrust is equal in either direction. The are also designed with a special view to being used inside a tunnel, thus avoiding cavitation (= unwanted noise!). The New 6 Blade Bow thruster propeller from Vetus. Reduces current consumption by 10%. Increases thrust and reduces cavitation and vibration. Now you can buy these new propellers as retrofit parts for your existing Vetus Bow thrusters Diameter 9 7/8" Fits 125/130/160 kgf Bow Thrusters http://www.getaprop.com/content-product_info/product_id-1378/vetus_6_blade_propeller.html http://www.getaprop.com/images/products/155[1].jpg http://www.getaprop.com/content-product_info/product_id-1378/vetus_6_blade_propeller.html Vetus Propeller 6 blade...New Style Fits 25 kgf VETUS uses plastic propellers, which cannot corrode. Owing to their low weight, the maximum thrust force is obtained very quickly and with minimum use of energy. The propeller blades are shaped in such a way, that the thrust is equal in either direction. The are also designed with a special view to being used inside a tunnel, thus avoiding cavitation (= unwanted noise!). The New 6 Blade Bow thruster propeller from Vetus. Reduces current consumption by 10%. Increases thrust and reduces cavitation and vibration. Now you can buy these new propellers as retrofit parts for your existing Vetus Bow thrusters Diameter 4 11/32" Fits 25 kgf Bow Thruster New Style http://www.getaprop.com/content-product_info/product_id-1374/vetus_6_blade_propeller.html http://www.getaprop.com/images/products/155[1].jpg http://www.getaprop.com/content-product_info/product_id-1374/vetus_6_blade_propeller.html 4 Blade fits 6HP... Single 4 blade composite GRP for 6HP. http://www.getaprop.com/content-product_info/product_id-1406/sidepower_propeller.html http://www.getaprop.com/images/products/s_SM101270[1].jpg http://www.getaprop.com/content-product_info/product_id-1406/sidepower_propeller.html 3 Blade fits 4 & 7hp w/14mm... Single 3 blade propeller. Fits old style 4hp/7HP w/14mm shaft & set screw http://www.getaprop.com/content-product_info/product_id-1404/sidepower_propeller.html http://www.getaprop.com/images/products/s_SM41250[1].jpg http://www.getaprop.com/content-product_info/product_id-1404/sidepower_propeller.html 3 Blade fits 4hp old style... Single 3 blade propeller. Fits old style w/12mm shaft & set screw http://www.getaprop.com/content-product_info/product_id-1403/sidepower_propeller.html http://www.getaprop.com/images/products/s_SM41250[1].jpg http://www.getaprop.com/content-product_info/product_id-1403/sidepower_propeller.html 4 Blade fits 30S2I/40S2I... Single 4 blade composite propeller makes for lower cavitation and noise. http://www.getaprop.com/content-product_info/product_id-1402/sidepower_propeller.html http://www.getaprop.com/images/products/s_SM101270[1].jpg http://www.getaprop.com/content-product_info/product_id-1402/sidepower_propeller.html 4 Blade fits 30S/35S/40S... Single 4 blade composite propeller makes for lower cavitation and noise. http://www.getaprop.com/content-product_info/product_id-1401/sidepower_propeller.html http://www.getaprop.com/images/products/s_SM101270[1].jpg http://www.getaprop.com/content-product_info/product_id-1401/sidepower_propeller.html 589351 - Lewmar 185TT Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-1366/185tt_lewmar_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-1366/185tt_lewmar_propeller.html 589151 - Lewmar 140TT Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-1365/140tt_lewmar_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-1365/140tt_lewmar_propeller.html 41100698 RH Propeller for models BP800, BP900 Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-2011/volvo_ql_bp800_bp900_rh_propeller.html http://www.getaprop.com/images/products/QL-07-P698[1].jpg http://www.getaprop.com/content-product_info/product_id-2011/volvo_ql_bp800_bp900_rh_propeller.html 41100698 RH Propeller for model BP500, BP600 Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-8270/volvo_ql_bp500_bp600_rh_propeller.html http://www.getaprop.com/images/products/QL-07-P677[1].jpg http://www.getaprop.com/content-product_info/product_id-8270/volvo_ql_bp500_bp600_rh_propeller.html 41100689 LH Propeller for model BP450 Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-2010/volvo_ql_bp450_lh_propeller.html http://www.getaprop.com/images/products/QL-07-P677[1].jpg http://www.getaprop.com/content-product_info/product_id-2010/volvo_ql_bp450_lh_propeller.html 41100677 RH Propeller for models BP250, BP300 & Twin BP450 Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-2009/volvo_ql_bp250_bp300_bp450_rh_propeller.html http://www.getaprop.com/images/products/QL-07-P677[1].jpg http://www.getaprop.com/content-product_info/product_id-2009/volvo_ql_bp250_bp300_bp450_rh_propeller.html 41100730 RH Propeller for models BP1200, BP1300, Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-2013/volvo_ql_bp1200_bp1300_rh_propeller.html http://www.getaprop.com/images/products/QL-07-P730[1].jpg http://www.getaprop.com/content-product_info/product_id-2013/volvo_ql_bp1200_bp1300_rh_propeller.html 41100731 LH Propeller for models BP1200, BP1300, Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-2014/volvo_ql_bp1200_bp1300_lh_propeller.html http://www.getaprop.com/images/products/QL-07-P731[1].jpg http://www.getaprop.com/content-product_info/product_id-2014/volvo_ql_bp1200_bp1300_lh_propeller.html 41100677 RH Propeller for models BP250, BP300 & Twin BP450 Driver Pin kit includes: 1-Bolt 1-Washer 2-Drive Pin http://www.getaprop.com/content-product_info/product_id-8271/volvo_ql_bp250_bp300_bp450_rh_propeller.html http://www.getaprop.com/images/products/QL-07-P677[1].jpg http://www.getaprop.com/content-product_info/product_id-8271/volvo_ql_bp250_bp300_bp450_rh_propeller.html 859046Q3-Propeller Wrench Fits 15/16" Nut... Mercury/Mariner 30-60 HP (std. gearcase) Plastic Prop Wrench (orange) http://www.getaprop.com/content-product_info/product_id-3143/floating_propeller_wrench.html http://www.getaprop.com/images/products/5619_reg[1].jpg http://www.getaprop.com/content-product_info/product_id-3143/floating_propeller_wrench.html 859046Q2-Propeller Wrench Fits 13/16"Nut... Mercury-Mariner 20-25 HP, OMC 9.9-30 HP Plastic Prop Wrench (green) http://www.getaprop.com/content-product_info/product_id-3136/floating_propeller_wrench.html http://www.getaprop.com/images/products/5618_reg[1].jpg http://www.getaprop.com/content-product_info/product_id-3136/floating_propeller_wrench.html 859046Q1-Propeller Wrench Fits 9/16" Nut... Mercury-Mariner 6-15 HP Plastic Prop Wrench (purple) http://www.getaprop.com/content-product_info/product_id-3133/floating_propeller_wrench.html http://www.getaprop.com/images/products/5617_reg[1].jpg http://www.getaprop.com/content-product_info/product_id-3133/floating_propeller_wrench.html 859046Q4-Propeller Wrench Fits 1-1/16" Nut... Mercury/Mariner 75-250 Hp Sterndrives, Alpha, Bravo I Yamaha 50-250 Hp Nissan/Tohatsu70-140 Hp Suzuki DF60,70,DT75,85-225 Hp Honda75-225 Hp Johnson/Evinrude 45 to 300HP OMC Cobra 800 & Volvo SX Drives http://www.getaprop.com/content-product_info/product_id-3125/floating_propeller_wrench.html http://www.getaprop.com/images/products/yelprop[1].jpg http://www.getaprop.com/content-product_info/product_id-3125/floating_propeller_wrench.html 3862797 Volvo Penta Duo-Prop XDP Forward nut Tool Kit.. To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-9009/volvo_penta_xdp_duo_prop_wrench.html http://www.getaprop.com/images/products/3862797 copy.jpg http://www.getaprop.com/content-product_info/product_id-9009/volvo_penta_xdp_duo_prop_wrench.html 3862808 Volvo Penta Duo-Prop XDP Rear Nut Tool... To help you remove and remount duoprops.This special tool helps you remove the Rear Propeller Nut. http://www.getaprop.com/content-product_info/product_id-9010/volvo_penta_xdp_duo_prop_wrench.html http://www.getaprop.com/images/products/3862808 copy.jpg http://www.getaprop.com/content-product_info/product_id-9010/volvo_penta_xdp_duo_prop_wrench.html 3888918 New Volvo Penta Duo-Prop Tool Kit for all DP-S and DPS-A Sterndrives that use the D and F series Propellers. To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-7212/volvo_penta_duo_prop_tool.html http://www.getaprop.com/images/products/dptool1.JPG http://www.getaprop.com/content-product_info/product_id-7212/volvo_penta_duo_prop_tool.html Volvo Penta Duo-Prop DPX Tool Kit, E-Series... To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-3894/volvo_penta_dpx_e_prop_wrench.html http://www.getaprop.com/images/products/dptoole.JPG http://www.getaprop.com/content-product_info/product_id-3894/volvo_penta_dpx_e_prop_wrench.html 21318669/885640 Volvo Penta Duo-Prop DPH Tool "G-Series"... To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-4092/volvo_penta_dph_g_duo_prop_wrench.html http://www.getaprop.com/images/products/dp2.JPG http://www.getaprop.com/content-product_info/product_id-4092/volvo_penta_dph_g_duo_prop_wrench.html 873058 Volvo Penta Duo-Prop A, B, & C Series Tool Kit... Volvo Penta Propeller Tool fits all A,B,C Duo-Prop Sterndrives with M20 Threads... Forward Nut # 3851334 To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-3893/volvo_penta_abc_duo_prop_wrench.html http://www.getaprop.com/images/products/vpnut.JPG http://www.getaprop.com/content-product_info/product_id-3893/volvo_penta_abc_duo_prop_wrench.html 3850984 Fits all Volvo Penta SX sterndrives Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2947/volvo_sx_propeller_nut_kit.html http://www.getaprop.com/images/products/16836[1].jpg http://www.getaprop.com/content-product_info/product_id-2947/volvo_sx_propeller_nut_kit.html 3852020...Fits all Volvo Penta SX sterndrives. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2950/volvo_sx_drive_propeller_thrust_washer.html http://www.getaprop.com/images/products/16834[2].jpg http://www.getaprop.com/content-product_info/product_id-2950/volvo_sx_drive_propeller_thrust_washer.html 3852350...Fits all Volvo Penta SX sterndrives. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2949/volvo_sx_drive_propeller_spacer_washer.html http://www.getaprop.com/images/products/16835[2].jpg http://www.getaprop.com/content-product_info/product_id-2949/volvo_sx_drive_propeller_spacer_washer.html 872179...Volvo Penta DPX Rear Nut fits all "E" Series Duo-prop Propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8864/volvo_dpx_e_propeller_rear_nut.html http://www.getaprop.com/images/products/872179VP.jpg http://www.getaprop.com/content-product_info/product_id-8864/volvo_dpx_e_propeller_rear_nut.html 3851335...Volvo Penta DPX Forward Nut fits all "E" Series Duo-prop Propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8863/volvo_dpx_e_propeller_fwd_nut.html http://www.getaprop.com/images/products/volvo dx1.JPG http://www.getaprop.com/content-product_info/product_id-8863/volvo_dpx_e_propeller_fwd_nut.html 3851569...Volvo Penta DPS Forward Nut fits all D&F Series Duo-prop Propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8854/volvo_dps_d_f_propeller_fwd_nut.html http://www.getaprop.com/images/products/DFFWDNUT.JPG http://www.getaprop.com/content-product_info/product_id-8854/volvo_dps_d_f_propeller_fwd_nut.html 3851341...Volvo Penta DPS Rear Nut fits all D&F Series Duo-prop Propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8855/volvo_dps_d_f_propeller_aft_nut.html http://www.getaprop.com/images/products/DFAFTNUT.JPG http://www.getaprop.com/content-product_info/product_id-8855/volvo_dps_d_f_propeller_aft_nut.html 3807136...Volvo Penta DPH Spinner Kit fits all "G" Series Duo-prop Propellers. 889936 Spinner 3863213 Nut Rear 3863211 Nut Front Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8886/volvo_dph_g_propeller_spinner_kit.html http://www.getaprop.com/images/products/889936DPHSPINNERkit.JPG http://www.getaprop.com/content-product_info/product_id-8886/volvo_dph_g_propeller_spinner_kit.html 3863213...Volvo Penta DPH Rear Nut fits all "G" Series Duo-prop Propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8887/volvo_dph_g_propeller_rear_nut.html http://www.getaprop.com/images/products/3863213DPH.jpg http://www.getaprop.com/content-product_info/product_id-8887/volvo_dph_g_propeller_rear_nut.html 3863211...Volvo Penta DPH Forward Nut fits all "G" Series Duo-prop Propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8888/volvo_dph_g_propeller_fwd_nut.html http://www.getaprop.com/images/products/3863211DPH.jpg http://www.getaprop.com/content-product_info/product_id-8888/volvo_dph_g_propeller_fwd_nut.html 853676 Volvo Penta Duo Prop A Series Diesel Spacer ring... Mounts under Prop Cone. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7134/volvo_dp_abc_spacer_ring.html http://www.getaprop.com/images/products/dpdie[2].jpg http://www.getaprop.com/content-product_info/product_id-7134/volvo_dp_abc_spacer_ring.html 3858458...Fits all Volvo Penta A,B,C Duo Prop sterndrives. Rear Thrust Washer... Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7132/volvo_dp_abc_rear_thrust_washer.html http://www.getaprop.com/images/products/volvodp2[1].jpg http://www.getaprop.com/content-product_info/product_id-7132/volvo_dp_abc_rear_thrust_washer.html 3851334...Volvo Penta Propeller Foward Nut fits all A,B,C Duo-Prop Sterndrives with M20 Threads... This nut also fits Volvo Tool Kit # 873058 Always use marine grease when installing a propeller. http://www.getaprop.com/content-product_info/product_id-8306/volvo_dp_abc_propeller_fwd_nut_20mm.html http://www.getaprop.com/images/products/ANB[1].jpg http://www.getaprop.com/content-product_info/product_id-8306/volvo_dp_abc_propeller_fwd_nut_20mm.html 852196...Volvo Penta Propeller FWD Nut fits all A,B,C Duo-prop sterndrives with M16 threads... Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8296/volvo_dp_abc_propeller_fwd_nut_16mm.html http://www.getaprop.com/images/products/280dpabc.JPG http://www.getaprop.com/content-product_info/product_id-8296/volvo_dp_abc_propeller_fwd_nut_16mm.html 872614...Fits all Volvo Penta A,B,C Duo-prop sterndrives. 16mm shaft...8mm bolt diameter. Propeller Cone Kit includes: 1) Spinner (Cone) #872614 1) Plastic Washer #854294 1) Spacer Ring #853676 (A Series Diesel Only) 1) 8mm Lock Bolt #872545 Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-8297/volvo_dp_abc_propeller_cone_kit_16mm.html http://www.getaprop.com/images/products/DPCONE1[1].jpg http://www.getaprop.com/content-product_info/product_id-8297/volvo_dp_abc_propeller_cone_kit_16mm.html 854667 Volvo Duo Prop A,B,C Mounting Washer Kit... Kit includes: 1) 854665 Pressure Washer 1) 854294 Plastic Washer Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7130/volvo_dp_abc_mounting_kit.html http://www.getaprop.com/images/products/Untitledsss.jpg http://www.getaprop.com/content-product_info/product_id-7130/volvo_dp_abc_mounting_kit.html 853869...Fits all Volvo Penta A,B,C Duo-prop sterndrives. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7085/volvo_dp_abc_lock_ring.html http://www.getaprop.com/images/products/dpsp.jpg http://www.getaprop.com/content-product_info/product_id-7085/volvo_dp_abc_lock_ring.html 3858457 Fwd Thrust Washer fits all Volvo Penta A,B,C Duo-prop sterndrives. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7131/volvo_dp_abc_fwd_thrust_washer.html http://www.getaprop.com/images/products/volvodp1[2].jpg http://www.getaprop.com/content-product_info/product_id-7131/volvo_dp_abc_fwd_thrust_washer.html 897367...Aquamatic 200, 250, 270, 275, 280, 290 SP For short hub propellers only. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2953/volvo_aquamatic_short_hub_tab_washer.html http://www.getaprop.com/images/products/16849[1].jpg http://www.getaprop.com/content-product_info/product_id-2953/volvo_aquamatic_short_hub_tab_washer.html 854047...Aquamatic 200, 250, 270, 275, 280, 290 SP For short hub propellers only Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2951/volvo_aquamatic_short_hub_spacer_washer.html http://www.getaprop.com/images/products/16848[1].jpg http://www.getaprop.com/content-product_info/product_id-2951/volvo_aquamatic_short_hub_spacer_washer.html 839534...Aquamatic 200, 250, 270, 275, 280, 290 SP For short hub propellers only. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2956/volvo_aquamatic_short_hub_line_cutter.html http://www.getaprop.com/images/products/16843[1].jpg http://www.getaprop.com/content-product_info/product_id-2956/volvo_aquamatic_short_hub_line_cutter.html 850888...Aquamatic 200, 250, 270, 275, 280, 290 SP For long hub propellers only. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2952/volvo_aquamatic_long_hub_plastic_washer.html http://www.getaprop.com/images/products/17875[1].jpg http://www.getaprop.com/content-product_info/product_id-2952/volvo_aquamatic_long_hub_plastic_washer.html 839423...Aquamatic 200, 250, 270, 275, 280, 290 SP For long hub propellers only. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2955/volvo_aquamatic_long_hub_line_cutter.html http://www.getaprop.com/images/products/16842[1].jpg http://www.getaprop.com/content-product_info/product_id-2955/volvo_aquamatic_long_hub_line_cutter.html 850396... Fits Volvo and Yanmar Saildrives. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7890/volvo_aquamatic_cone_kit.html http://www.getaprop.com/images/products/SA.JPG http://www.getaprop.com/content-product_info/product_id-7890/volvo_aquamatic_cone_kit.html 854045... Fits Aquamatic 200, 250, 270, 275, 280, 290 SP Cone nut for long and short hub propellers Short hub propellers may require spacer washer Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2948/volvo_aquamatic_cone_kit.html http://www.getaprop.com/images/products/16845[2].jpg http://www.getaprop.com/content-product_info/product_id-2948/volvo_aquamatic_cone_kit.html 850889...Aquamatic 200, 250, 270, 275, 280, 290 SP Allen Bolt for long and some short propellers. Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-2954/volvo_aquamatic_allen_bolt.html http://www.getaprop.com/images/products/16851[1].jpg http://www.getaprop.com/content-product_info/product_id-2954/volvo_aquamatic_allen_bolt.html 3850984 Fits all Volvo Penta SX sterndrives Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-6437/volvo_sx_propeller_nut_kit.html http://www.getaprop.com/images/products/16836[1].jpg http://www.getaprop.com/content-product_info/product_id-6437/volvo_sx_propeller_nut_kit.html 28" Gori 3 Blade folding Propeller Shaft diameters 1 3/4" thru 2.5" also Metric Shaft diameters thru 60mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8961/gori_sailboat_propeller_28.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8961/gori_sailboat_propeller_28.html 26" Gori 3 Blade folding Propeller Shaft diameters 1 1/2" thru 2"" also Metric Shaft diameters thru 50mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8960/gori_sailboat_propeller_26.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8960/gori_sailboat_propeller_26.html 24" Gori 3 Blade folding Propeller Shaft diameters 1 1/2" thru 2" also Metric Shaft diameters thru 50mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8959/gori_sailboat_propeller_24.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8959/gori_sailboat_propeller_24.html 22" Gori 3 Blade folding Propeller Shaft diameters 1 1/4" thru 1 3/4" also Metric Shaft diameters thru 40mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8958/gori_sailboat_propeller_22.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8958/gori_sailboat_propeller_22.html 20" Gori 3 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 1 1/4" thru 1 3/4" also Metric Shaft diameters thru 40mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8957/gori_sailboat_propeller_20.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8957/gori_sailboat_propeller_20.html 18" Gori 3 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 3/8" also Metric Shaft diameters thru 35mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8956/gori_sailboat_propeller_18.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8956/gori_sailboat_propeller_18.html 18" Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters thru 1 3/8" also Metric Shaft diameters thru 35mm, available in 11 trhu 15 Pitch. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8953/gori_sailboat_propeller_18.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8953/gori_sailboat_propeller_18.html 16.5" Gori 3 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8955/gori_sailboat_propeller_16_5.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8955/gori_sailboat_propeller_16_5.html 16.5" Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters thru 1 3/8" also Metric Shaft diameters thru 35mm, available in 11 and 13 Pitch. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8952/gori_sailboat_propeller_16_5.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8952/gori_sailboat_propeller_16_5.html 15" Gori 3 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8954/gori_sailboat_propeller_15.html http://www.getaprop.com/images/products/gori3b.jpg http://www.getaprop.com/content-product_info/product_id-8954/gori_sailboat_propeller_15.html 15" Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm, available in 10-12 Pitch. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8950/gori_sailboat_propeller_15.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8950/gori_sailboat_propeller_15.html 14" X 9.5 Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8949/gori_sailboat_propeller_14.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8949/gori_sailboat_propeller_14.html 13" X 09 Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8948/gori_sailboat_propeller_13.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8948/gori_sailboat_propeller_13.html 12.5 RH 08 Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8947/gori_sailboat_propeller_12_5.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8947/gori_sailboat_propeller_12_5.html 11.5 RH 9.5 Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8946/gori_sailboat_propeller_11_5.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8946/gori_sailboat_propeller_11_5.html 11.5 X 08 Gori 2 Blade folding Propeller fits Volvo & Yanmar Saildrives & Shaft diameters 3/4" thru 1 1/8" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> First off, you will see an increase in sailing speeds over a fixed 3-blade propeller. The drag reduction will amount to approx. 0.95 + of a knot. The drag for both the Gori 2-blade & 3-blade propellers is the lowest of any fixed, feathering or folding propellers giving increased sailing speeds & less turbulence over the rudder enabling you to point higher, steer easier. The unique folding design prevents seaweed etc from fouling on the propeller giving increased speed potential. The geared blade design is very positive and ensures that all the blades open & close all together in one shaft revolution giving peace of mind when maneuvering full control. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8945/gori_sailboat_propeller_11_5.html http://www.getaprop.com/images/products/GORI2B.JPG http://www.getaprop.com/content-product_info/product_id-8945/gori_sailboat_propeller_11_5.html 530mm (20.8" diamater) X 375mm (14.7 pitch) Gori 2 Blade Racing Propeller fits Shaft diameters thru 1.750" also Metric Shaft diameters thru 40mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> The design and shape of the propeller give absolutely minimum drag when folded, and a fine effect under engine power. The well-known system of geared blades is used on the racing series, but the shape of this fully-closing folding propeller secures low drag and the blades stay closed when sailing. Yet still open under engine power. The racing series of folding propellers is offered to racing yachtsmen all-over the world in 7 sizes ranging from 30 footers to Maxi Raters, and for shaft installation as well as for Sail-drive and Hydrodrive. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8967/gori_racing_propeller_530mm.html http://www.getaprop.com/images/products/goriracing1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8967/gori_racing_propeller_530mm.html 475mm (18.7" diamater) X 330mm (12.9 pitch) Gori 2 Blade Racing Propeller fits Shaft diameters thru 1.375" also Metric Shaft diameters thru 35mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> The design and shape of the propeller give absolutely minimum drag when folded, and a fine effect under engine power. The well-known system of geared blades is used on the racing series, but the shape of this fully-closing folding propeller secures low drag and the blades stay closed when sailing. Yet still open under engine power. The racing series of folding propellers is offered to racing yachtsmen all-over the world in 7 sizes ranging from 30 footers to Maxi Raters, and for shaft installation as well as for Sail-drive and Hydrodrive. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8966/gori_racing_propeller_475mm.html http://www.getaprop.com/images/products/goriracing1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8966/gori_racing_propeller_475mm.html 450mm (17.7" diamater) X 300mm (11.8 pitch) Gori 2 Blade Racing Propeller fits Shaft diameters thru 1.125" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> The design and shape of the propeller give absolutely minimum drag when folded, and a fine effect under engine power. The well-known system of geared blades is used on the racing series, but the shape of this fully-closing folding propeller secures low drag and the blades stay closed when sailing. Yet still open under engine power. The racing series of folding propellers is offered to racing yachtsmen all-over the world in 7 sizes ranging from 30 footers to Maxi Raters, and for shaft installation as well as for Sail-drive and Hydrodrive. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8965/gori_racing_propeller_450mm.html http://www.getaprop.com/images/products/goriracing1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8965/gori_racing_propeller_450mm.html 425mm (16.7" diamater) X 300mm (11.8 pitch) Gori 2 Blade Racing Propeller fits Shaft diameters thru 1.125" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> The design and shape of the propeller give absolutely minimum drag when folded, and a fine effect under engine power. The well-known system of geared blades is used on the racing series, but the shape of this fully-closing folding propeller secures low drag and the blades stay closed when sailing. Yet still open under engine power. The racing series of folding propellers is offered to racing yachtsmen all-over the world in 7 sizes ranging from 30 footers to Maxi Raters, and for shaft installation as well as for Sail-drive and Hydrodrive. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8964/gori_racing_propeller_425mm.html http://www.getaprop.com/images/products/goriracing1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8964/gori_racing_propeller_425mm.html 380mm (14.9" diamater) LH 260mm (10.4 pitch) Gori 2 Blade Racing Propeller fits Shaft diameters thru 1.125" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> The design and shape of the propeller give absolutely minimum drag when folded, and a fine effect under engine power. The well-known system of geared blades is used on the racing series, but the shape of this fully-closing folding propeller secures low drag and the blades stay closed when sailing. Yet still open under engine power. The racing series of folding propellers is offered to racing yachtsmen all-over the world in 7 sizes ranging from 30 footers to Maxi Raters, and for shaft installation as well as for Sail-drive and Hydrodrive. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8963/gori_racing_propeller_380mm.html http://www.getaprop.com/images/products/goriracing1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8963/gori_racing_propeller_380mm.html 375mm (14.7" diamater) RH 260mm (10.2 pitch) Gori 2 Blade Racing Propeller fits Shaft diameters thru 1.125" also Metric Shaft diameters thru 30mm. <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> The design and shape of the propeller give absolutely minimum drag when folded, and a fine effect under engine power. The well-known system of geared blades is used on the racing series, but the shape of this fully-closing folding propeller secures low drag and the blades stay closed when sailing. Yet still open under engine power. The racing series of folding propellers is offered to racing yachtsmen all-over the world in 7 sizes ranging from 30 footers to Maxi Raters, and for shaft installation as well as for Sail-drive and Hydrodrive. Key Fatures Include: Maximum performance under power Superior performance in reverse Lowest drag under sail 2 and 3-blade design Gori unmatched construction Virtually no maintenance No fouling of lines under sail Approved use with sail drives & shaft drives Fair pricing http://www.getaprop.com/content-product_info/product_id-8962/gori_racing_propeller_375mm.html http://www.getaprop.com/images/products/goriracing1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8962/gori_racing_propeller_375mm.html Mercury High 5 Stainless Propeller Fits Alpha, Bravo One and TRS sterndrives... XHS Hub Kit 102 Not Included Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water For outboards over 75 hp and Alpha, Bravo One and TRS sterndrives http://www.getaprop.com/content-product_info/product_id-4338/mercury_high_five_stainless_propeller.html http://www.getaprop.com/images/products/hi555.JPG http://www.getaprop.com/content-product_info/product_id-4338/mercury_high_five_stainless_propeller.html 24 RH 23 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 42 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6554/nakashima_type_propeller_24_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6554/nakashima_type_propeller_24_dia.html 24 RH 21 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 42 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6550/nakashima_type_propeller_24_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6550/nakashima_type_propeller_24_dia.html 24 RH 20 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 42 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6548/nakashima_type_propeller_24_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6548/nakashima_type_propeller_24_dia.html 24 RH 22 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 42 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6552/nakashima_type_propeller_24_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6552/nakashima_type_propeller_24_dia.html 22 RH 26 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 32 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6546/nakashima_type_propeller_22_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6546/nakashima_type_propeller_22_dia.html 22 RH 25 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 32 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6544/nakashima_type_propeller_22_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6544/nakashima_type_propeller_22_dia.html 22 RH 24 X 4 Blade 2" Bore Ni-Bral Bayliner Yacht Propeller... EAR= 0.71 Weight 32 Lbs Hub Dia Fwd 2 3/4" Hub Dia Aft 3" Hub Length 6"(Full Taper) Bore: 2" Heavy duty Ni-Bral alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6542/nakashima_type_propeller_22_dia.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-6542/nakashima_type_propeller_22_dia.html 22" LH Nakashima Standard 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" Nakashima's blade design eliminates noise & cavitation and is most desireable for mediun to high speed vessels. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8651/nakashima_standard_nibral_propeller_22.html http://www.getaprop.com/images/products/nakLH.jpg http://www.getaprop.com/content-product_info/product_id-8651/nakashima_standard_nibral_propeller_22.html 32" LH Nakashima Hi Skew 4 Blade NiBral Propeller 3" SAE Standard Taper & Keyway Full taper Hub Length 9" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8635/nakashima_hi_skew_nibral_propeller_32.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8635/nakashima_hi_skew_nibral_propeller_32.html 32" RH Nakashima Hi Skew 4 Blade NiBral Propeller 3" SAE Standard Taper & Keyway Full taper Hub Length 9" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8634/nakashima_hi_skew_nibral_propeller_32.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8634/nakashima_hi_skew_nibral_propeller_32.html 24" LH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8637/nakashima_hi_skew_nibral_propeller_24.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8637/nakashima_hi_skew_nibral_propeller_24.html 24" RH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8636/nakashima_hi_skew_nibral_propeller_24.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8636/nakashima_hi_skew_nibral_propeller_24.html 23" LH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8641/nakashima_hi_skew_nibral_propeller_23.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8641/nakashima_hi_skew_nibral_propeller_23.html 23" RH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8640/nakashima_hi_skew_nibral_propeller_23.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8640/nakashima_hi_skew_nibral_propeller_23.html 22" LH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8649/nakashima_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8649/nakashima_hi_skew_nibral_propeller_22.html 22" RH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8648/nakashima_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8648/nakashima_hi_skew_nibral_propeller_22.html 22" LH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8647/nakashima_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8647/nakashima_hi_skew_nibral_propeller_22.html 21" LH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8653/nakashima_hi_skew_nibral_propeller_21.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8653/nakashima_hi_skew_nibral_propeller_21.html 23" LH Nakashima Standard 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's blade design eliminates noise & cavitation and is most desireable for mediun to high speed vessels. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8645/nakashima_standard_nibral_propeller_23.html http://www.getaprop.com/images/products/nakLH.jpg http://www.getaprop.com/content-product_info/product_id-8645/nakashima_standard_nibral_propeller_23.html 20" LH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8657/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8657/nakashima_hi_skew_nibral_propeller_20.html 20" LH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8655/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1LH.jpg http://www.getaprop.com/content-product_info/product_id-8655/nakashima_hi_skew_nibral_propeller_20.html 22" RH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8646/nakashima_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8646/nakashima_hi_skew_nibral_propeller_22.html 21" RH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8652/nakashima_hi_skew_nibral_propeller_21.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8652/nakashima_hi_skew_nibral_propeller_21.html 20" RH Nakashima Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8656/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8656/nakashima_hi_skew_nibral_propeller_20.html 23" RH Nakashima Standard 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's blade design eliminates noise & cavitation and is most desireable for mediun to high speed vessels. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8644/nakashima_standard_nibral_propeller_23.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-8644/nakashima_standard_nibral_propeller_23.html 22" RH Nakashima Standard 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" Nakashima's blade design eliminates noise & cavitation and is most desireable for mediun to high speed vessels. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8650/nakashima_standard_nibral_propeller_22.html http://www.getaprop.com/images/products/nakdq121 copy.jpg http://www.getaprop.com/content-product_info/product_id-8650/nakashima_standard_nibral_propeller_22.html 20" RH Nakashima Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" Nakashima's speciality Hi Skew blade design eliminates noise & cavitation and is most desireable for mediun to high speed in tunnel operation. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8654/nakashima_hi_skew_nibral_propeller_20.html http://www.getaprop.com/images/products/nak1 copy.jpg http://www.getaprop.com/content-product_info/product_id-8654/nakashima_hi_skew_nibral_propeller_20.html Mercury Bravo I Stainless Propeller fits Alpha & Bravo 1 Sterndrives with 150hp or higher. XHS Hub Kit 102 Not Included Adding increased speed, better acceleration and improved top end performance to a high performance, huge horsepower boat can be accomplished by adding a Bravo 1 propeller. With its massive area and no holds barred blade geometry, the Bravo 1 excels at elevated drive heights with big horsepower. This four blade stainless steel propeller is setting the pace too fast for any others to follow. http://www.getaprop.com/content-product_info/product_id-4346/mercury_bravo_one_propeller.html http://www.getaprop.com/images/products/brv01.JPG http://www.getaprop.com/content-product_info/product_id-4346/mercury_bravo_one_propeller.html 589351 - Lewmar 185TT Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-6398/185tt_lewmar_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-6398/185tt_lewmar_propeller.html 589750 - Lewmar 300TT Right Hand Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-1369/300tt_lewmar_rh_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-1369/300tt_lewmar_rh_propeller.html 589751 - Lewmar 300TT Left Hand Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-1370/300tt_lewmar_lh_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-1370/300tt_lewmar_lh_propeller.html 589551 - Lewmar 250TT Right Hand Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-1367/250tt_lewmar_rh_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-1367/250tt_lewmar_rh_propeller.html Lewmar Left Hand Replacement propeller... High performance 5 blade propellers give equal thrust in both directions http://www.getaprop.com/content-product_info/product_id-1368/250tt_lewmar_lh_propeller.html http://www.getaprop.com/images/products/prop[1].jpg http://www.getaprop.com/content-product_info/product_id-1368/250tt_lewmar_lh_propeller.html 589550 - Lewmar 250/300TT Zinc Anode Replacement Kit... Attached with a large accessible nut - easy to replace with the boat in the water Specially designed with a stainless steel sleeve for optimal retention Replacement anodes are also available http://www.getaprop.com/content-product_info/product_id-1373/250_300tt_lewmar_thruster_anode_kit.html http://www.getaprop.com/images/products/lewmar1.JPG http://www.getaprop.com/content-product_info/product_id-1373/250_300tt_lewmar_thruster_anode_kit.html 589350 - Lewmar 185TT Zinc Anode Replacement Kit... Attached with a large accessible nut - easy to replace with the boat in the water Specially designed with a stainless steel sleeve for optimal retention Replacement anodes are also available http://www.getaprop.com/content-product_info/product_id-1372/185tt_lewmar_thruster_anode_kit.html http://www.getaprop.com/images/products/lewmar1.JPG http://www.getaprop.com/content-product_info/product_id-1372/185tt_lewmar_thruster_anode_kit.html 589150 - Lewmar 140TT Zinc Anode Replacement Kit... Attached with a large accessible nut - easy to replace with the boat in the water Specially designed with a stainless steel sleeve for optimal retention Replacement anodes are also available http://www.getaprop.com/content-product_info/product_id-1371/140tt_lewmar_thruster_anode_kit.html http://www.getaprop.com/images/products/lewmar1.JPG http://www.getaprop.com/content-product_info/product_id-1371/140tt_lewmar_thruster_anode_kit.html 19 X 16 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8220/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8220/volvo_skewed_folding_propeller_3b.html 18 X 16 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8219/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8219/volvo_skewed_folding_propeller_3b.html 18 X 15 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8218/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8218/volvo_skewed_folding_propeller_3b.html 18 X 14 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8217/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8217/volvo_skewed_folding_propeller_3b.html 18 X 13 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8216/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8216/volvo_skewed_folding_propeller_3b.html 18 X 12 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8215/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8215/volvo_skewed_folding_propeller_3b.html 17 X 12 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8214/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8214/volvo_skewed_folding_propeller_3b.html 17 X 11 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8213/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8213/volvo_skewed_folding_propeller_3b.html 16 X 11 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8212/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8212/volvo_skewed_folding_propeller_3b.html 16 X 10 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8211/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8211/volvo_skewed_folding_propeller_3b.html 15 X 10 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8210/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8210/volvo_skewed_folding_propeller_3b.html 15 X 9 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8209/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8209/volvo_skewed_folding_propeller_3b.html 14 X 9 3 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8208/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8208/volvo_skewed_folding_propeller_3b.html 14 X 8 3 Blade Nibral Folding Sailboat Propeller. Available in RH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8207/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8207/volvo_skewed_folding_propeller_3b.html 14 X 7 3 Blade Nibral Folding Sailboat Propeller. Available in RH rotations for both S-Drive and Shaft installations. The 3-blade folding propeller provides an alternative for those who have chosen fixed propellers for better reverse thrust and those who have chosen the conventional 2-blade folding propeller but need better manoeuvrability and performance. The power range for the 3-blade propeller is 25-60 Hp and it is available in 6 sizes with several different pitches, and a blade area of 36%. http://www.getaprop.com/content-product_info/product_id-8206/volvo_skewed_folding_propeller_3b.html http://www.getaprop.com/images/products/VOLVO SA3.JPG http://www.getaprop.com/content-product_info/product_id-8206/volvo_skewed_folding_propeller_3b.html 20" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-8687/martec_mk_iii_eliptec_20.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-8687/martec_mk_iii_eliptec_20.html 19" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-8169/martec_mk_iii_eliptec_19.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-8169/martec_mk_iii_eliptec_19.html 18" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6859/martec_mk_iii_eliptec_18.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6859/martec_mk_iii_eliptec_18.html 17" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6858/martec_mk_iii_eliptec_17.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6858/martec_mk_iii_eliptec_17.html 16" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6857/martec_mk_iii_eliptec_16.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6857/martec_mk_iii_eliptec_16.html 15" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6856/martec_mk_iii_eliptec_15.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6856/martec_mk_iii_eliptec_15.html 14" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6855/martec_mk_iii_eliptec_14.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6855/martec_mk_iii_eliptec_14.html 13" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6854/martec_mk_iii_eliptec_13.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6854/martec_mk_iii_eliptec_13.html 12" Bronze 2 Blade Martec MK III Eliptec Propeller... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> Our Mark III is the third generation of Martec folding props. And its the lowest drag sailboat propeller anywhere. Thirty years of continuous development and improvement has resulted in a folding propeller with the lowest drag under sail. Its absolute simplicity insures maximum reliability. And the proof is in the use: the Mark III is the most widely sold, widely used low drag prop of the last thirtyfive years. http://www.getaprop.com/content-product_info/product_id-6853/martec_mk_iii_eliptec_12.html http://www.getaprop.com/images/products/mt11.JPG http://www.getaprop.com/content-product_info/product_id-6853/martec_mk_iii_eliptec_12.html 16 X 11 2 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 2-blade propeller is excellent for most boats. The high skewed blade form converts more of the horsepower into thrust for maximum efficiency and minimum noise and the design insures the blade always will open under power and fold back under sail into a very low drag configuration. The large blade area contributes to the propellers high performance. The power range for the 2-blade propeller is 5-40 Hp and it is available in 6 sizes with several different pitches and a blade area of 25%. http://www.getaprop.com/content-product_info/product_id-8228/volvo_skewed_folding_propeller_2b.html http://www.getaprop.com/images/products/VOLVO SA2.JPG http://www.getaprop.com/content-product_info/product_id-8228/volvo_skewed_folding_propeller_2b.html 16 X 10 2 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 2-blade propeller is excellent for most boats. The high skewed blade form converts more of the horsepower into thrust for maximum efficiency and minimum noise and the design insures the blade always will open under power and fold back under sail into a very low drag configuration. The large blade area contributes to the propellers high performance. The power range for the 2-blade propeller is 5-40 Hp and it is available in 6 sizes with several different pitches and a blade area of 25%. http://www.getaprop.com/content-product_info/product_id-8227/volvo_skewed_folding_propeller_2b.html http://www.getaprop.com/images/products/VOLVO SA2.JPG http://www.getaprop.com/content-product_info/product_id-8227/volvo_skewed_folding_propeller_2b.html 19 X 13 2 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 2-blade propeller is excellent for most boats. The high skewed blade form converts more of the horsepower into thrust for maximum efficiency and minimum noise and the design insures the blade always will open under power and fold back under sail into a very low drag configuration. The large blade area contributes to the propellers high performance. The power range for the 2-blade propeller is 5-40 Hp and it is available in 6 sizes with several different pitches and a blade area of 25%. http://www.getaprop.com/content-product_info/product_id-8232/volvo_skewed_folding_propeller_2b.html http://www.getaprop.com/images/products/VOLVO SA2.JPG http://www.getaprop.com/content-product_info/product_id-8232/volvo_skewed_folding_propeller_2b.html 18 X 12 2 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 2-blade propeller is excellent for most boats. The high skewed blade form converts more of the horsepower into thrust for maximum efficiency and minimum noise and the design insures the blade always will open under power and fold back under sail into a very low drag configuration. The large blade area contributes to the propellers high performance. The power range for the 2-blade propeller is 5-40 Hp and it is available in 6 sizes with several different pitches and a blade area of 25%. http://www.getaprop.com/content-product_info/product_id-8231/volvo_skewed_folding_propeller_2b.html http://www.getaprop.com/images/products/VOLVO SA2.JPG http://www.getaprop.com/content-product_info/product_id-8231/volvo_skewed_folding_propeller_2b.html 17 X 12 2 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 2-blade propeller is excellent for most boats. The high skewed blade form converts more of the horsepower into thrust for maximum efficiency and minimum noise and the design insures the blade always will open under power and fold back under sail into a very low drag configuration. The large blade area contributes to the propellers high performance. The power range for the 2-blade propeller is 5-40 Hp and it is available in 6 sizes with several different pitches and a blade area of 25%. http://www.getaprop.com/content-product_info/product_id-8230/volvo_skewed_folding_propeller_2b.html http://www.getaprop.com/images/products/VOLVO SA2.JPG http://www.getaprop.com/content-product_info/product_id-8230/volvo_skewed_folding_propeller_2b.html 17 X 11 2 Blade Nibral Folding Sailboat Propeller. Available in RH & LH rotations for both S-Drive and Shaft installations. The 2-blade propeller is excellent for most boats. The high skewed blade form converts more of the horsepower into thrust for maximum efficiency and minimum noise and the design insures the blade always will open under power and fold back under sail into a very low drag configuration. The large blade area contributes to the propellers high performance. The power range for the 2-blade propeller is 5-40 Hp and it is available in 6 sizes with several different pitches and a blade area of 25%. http://www.getaprop.com/content-product_info/product_id-8229/volvo_skewed_folding_propeller_2b.html http://www.getaprop.com/images/products/VOLVO SA2.JPG http://www.getaprop.com/content-product_info/product_id-8229/volvo_skewed_folding_propeller_2b.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 3 3/4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:3.750" Stern Tube O.D. 5.000" thru 7.000" Seal Length: 9.000" Overall length W/ Hose: 13.500" - 17.500" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7706/lasdrop_gen_ii_shaft_seal_3_3_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7706/lasdrop_gen_ii_shaft_seal_3_3_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 3 1/4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:3.250" Stern Tube O.D. 4.000" thru 6.625" Seal Length: 7.400" Overall length W/ Hose: 12.500" - 14.500" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7704/lasdrop_gen_ii_shaft_seal_3_1_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7704/lasdrop_gen_ii_shaft_seal_3_1_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:4.000" Stern Tube O.D. 5.000" thru 8.000" Seal Length: 9.000" Overall length W/ Hose: 13.500" - 17.500 Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7707/lasdrop_gen_ii_shaft_seal_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7707/lasdrop_gen_ii_shaft_seal_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 3" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size: 3.000" Stern Tube O.D. 4.000" thru 6.000" Seal Length: 7.400" Overall length W/ Hose: 12.500" - 14.500" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7703/lasdrop_gen_ii_shaft_seal_3.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7703/lasdrop_gen_ii_shaft_seal_3.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 3 1/2" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:3.500" Stern Tube O.D. 4.500" thru 6.500" Seal Length: 7.600" Overall length W/ Hose: 12.750" - 14.750" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7705/lasdrop_gen_ii_shaft_seal_3_1_2.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7705/lasdrop_gen_ii_shaft_seal_3_1_2.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 2" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:2" Stern Tube O.D. 2.500" thru 4.500" Seal Length: 6.000" Overall length W/ Hose: 9.690" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7699/lasdrop_gen_ii_shaft_seal_2.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7699/lasdrop_gen_ii_shaft_seal_2.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 2 3/4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:2.750" Stern Tube O.D. 3.500" thru 6.000" Seal Length: 7.000" Overall length W/ Hose: 12.050" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7702/lasdrop_gen_ii_shaft_seal_2_3_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7702/lasdrop_gen_ii_shaft_seal_2_3_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 2 1/4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:2.250" Stern Tube O.D. 3.000" thru 5.000" Seal Length: 7.000" Overall length W/ Hose: 12.050" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7700/lasdrop_gen_ii_shaft_seal_2_1_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7700/lasdrop_gen_ii_shaft_seal_2_1_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 2 1/2" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:2.500" Stern Tube O.D. 3.000" thru 5.500" Seal Length: 7.000" Overall length W/ Hose: 12.050" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7701/lasdrop_gen_ii_shaft_seal_2_1_2.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7701/lasdrop_gen_ii_shaft_seal_2_1_2.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 1 3/8" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:1.375" Stern Tube O.D. 2.000" thru 3.500" Seal Length: 5.000" Overall length W/ Hose: 8.870" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7696/lasdrop_gen_ii_shaft_seal_1_3_8.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7696/lasdrop_gen_ii_shaft_seal_1_3_8.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 1 3/4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:1.750" Stern Tube O.D. 2.500" thru 4.500" Seal Length: 6.000" Overall length W/ Hose: 9.690" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7698/lasdrop_gen_ii_shaft_seal_1_3_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7698/lasdrop_gen_ii_shaft_seal_1_3_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 1 1/8" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water Shaft Size:1.125" Stern Tube O.D. 1.750" thru 3.000" Seal Length: 5.000" Overall length W/ Hose: 8.870" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7693/lasdrop_gen_ii_shaft_seal_1_1_8.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7693/lasdrop_gen_ii_shaft_seal_1_1_8.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 1 1/4" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:1.250" Stern Tube O.D. 1.750" thru 3.500" Seal Length: 5.000" Overall length W/ Hose: 8.870" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7695/lasdrop_gen_ii_shaft_seal_1_1_4.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7695/lasdrop_gen_ii_shaft_seal_1_1_4.html Lasdrop GEN II Shaft Seal Fits Shaft Diameter 1 1/2" The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. Shaft Size:1.500" Stern Tube O.D. 2.000" thru 3.500" Seal Length: 5.100" Overall length W/ Hose: 9.070" Installation Tips: Do not use oil or grease. During operation on a mechanical face seal, water hydroplanes between the seal surfaces for cooling and lubrication. This will distort the hydroplaning and will cause a spray or mist during operation. Be cautious not to scratch, chip or the like to the seal surfaces. This will also cause an interruption in the hydroplaning. Use liquid hand soap for ease of assembly. When any service is performed, it is recommended the vessel be out of the water. Do not exceed recommended compression. Orange (current) bellows model , Black bellows and Generation II . Do not remove shaft from coupling or removal of engine while vessel is in water. This may lead to seal surfaces opening up. Do not tighten factory installed hose clamps on friction ring assembly. If needed contact factory. Do not remove or tighten hose barb in seals using OIN (Oil Impregnated Nylon, green in color) as a friction ring assembly. Contact factory. Periodically insure water injection is present during engine running at all speeds. When vessel is out of the water for any period of time, it is recommended seal is washed down with fresh water. http://www.getaprop.com/content-product_info/product_id-7697/lasdrop_gen_ii_shaft_seal_1_1_2.html http://www.getaprop.com/images/products/g2lasdrop.JPG http://www.getaprop.com/content-product_info/product_id-7697/lasdrop_gen_ii_shaft_seal_1_1_2.html 155395 Gori Saildrive Split Ring Zinc Anodes for 18"- 20" 3 Blade Propellers... Fits 18"-20" - 3 Blade Saildrive Propellers Zinc Anodes 2pc. Outside Diameter: 3.75" Inside Diameter: 2.4" Height: 1.3" Weight: 2.2 Lbs. http://www.getaprop.com/content-product_info/product_id-8282/gori_saildrive_ring_18_20_props.html http://www.getaprop.com/images/products/GORI7.JPG http://www.getaprop.com/content-product_info/product_id-8282/gori_saildrive_ring_18_20_props.html 156700 Gori 2 Blade Saildrive Split Ring Zinc Anodes for 13"- 18" Propellers... Fits 2 Blade Saildrives Zinc Ring Anode- 2pc. Outside Diameter: 3.8" Inside Diameter: 3.1" Height: 1.6" Weight: 1.4Lbs. http://www.getaprop.com/content-product_info/product_id-8280/gori_saildrive_ring_13_18_props.html http://www.getaprop.com/images/products/GORI5.JPG http://www.getaprop.com/content-product_info/product_id-8280/gori_saildrive_ring_13_18_props.html 155275 Gori Saildrive Split Ring Zinc Anodes for 15"- 16.5" 3 Blade Propellers... Fits 15"-16.5" - 3 Blade Saildrive Propellers Zinc Anodes 2pc. Outside Diameter: 3.2" Inside Diameter: 2.2" Height: 1" Weight: 0.8 Lbs. http://www.getaprop.com/content-product_info/product_id-8281/gori_saildrive_ring_15_16_5_props.html http://www.getaprop.com/images/products/GORI7.JPG http://www.getaprop.com/content-product_info/product_id-8281/gori_saildrive_ring_15_16_5_props.html 1407511 Gori Zinc Anode for 28"- 30" 3-Blade Propellers... Zinc Anode 1pc. Hole Diameter: 0.25" Width : 1.75" Height: 0.50" Weight: 0.6 lbs http://www.getaprop.com/content-product_info/product_id-8275/gori_propeller_zinc_28_30_props.html http://www.getaprop.com/images/products/GORI31.JPG http://www.getaprop.com/content-product_info/product_id-8275/gori_propeller_zinc_28_30_props.html 1407410 Gori Zinc Anode for 22"- 26" 3-Blade Propellers... Zinc Anode 1pc. Hole Diameter: 0.30" Width : 1.30" Height: 0.80" Weight: 0.6 lbs http://www.getaprop.com/content-product_info/product_id-8274/gori_propeller_zinc_22_26_props.html http://www.getaprop.com/images/products/GORI31.JPG http://www.getaprop.com/content-product_info/product_id-8274/gori_propeller_zinc_22_26_props.html 1407210 Gori Zinc Anode for 15" & 16.5" 3-Blade Propellers... Zinc Anode-1pc. Hole Diameter: 0.3" Width : 1.00" Height: 0.63" Weight: 0.08 lbs http://www.getaprop.com/content-product_info/product_id-8272/gori_propeller_zinc_15_16_5_props.html http://www.getaprop.com/images/products/GORI31.JPG http://www.getaprop.com/content-product_info/product_id-8272/gori_propeller_zinc_15_16_5_props.html 1407310 Gori Zinc Anode for 18"- 20" 3-Blade Propellers... Zinc Anode 1pc. Hole Diameter: 0.25" Width : 1.10" Height: 0.63" Weight: 0.09 lbs http://www.getaprop.com/content-product_info/product_id-8273/gori_propeller_zinc_18_20_props.html http://www.getaprop.com/images/products/GORI31.JPG http://www.getaprop.com/content-product_info/product_id-8273/gori_propeller_zinc_18_20_props.html 155200 Gori Split Ring Zinc Anode kit for 15"-16.5" Propellers... Kit includes: Split Zinc Ring Anode, 4 Bolts, Allen Key and Locking Glue. http://www.getaprop.com/content-product_info/product_id-8276/gori_split_ring_kit_15_16_5_props.html http://www.getaprop.com/images/products/GORI41.JPG http://www.getaprop.com/content-product_info/product_id-8276/gori_split_ring_kit_15_16_5_props.html 155400 Gori Split Ring Zinc Anodes for 22"- 26" Propellers... Zinc Ring Anode- 2pc. Outside Diameter: 3.75" Inside Diameter: 2.40" Height: 1.80" Weight: 2.89 Lbs. http://www.getaprop.com/content-product_info/product_id-8278/gori_split_ring_zinc_22_26_props.html http://www.getaprop.com/images/products/GORI41.JPG http://www.getaprop.com/content-product_info/product_id-8278/gori_split_ring_zinc_22_26_props.html 155500 Gori Split Ring Zinc Anodes for 28"-30" Propellers... Zinc Ring Anode- 2pc. Outside Diameter: 5" Inside Diameter: 3.5" Height: 2" Weight: 4.7Lbs. http://www.getaprop.com/content-product_info/product_id-8279/gori_split_ring_zinc_28_30_props.html http://www.getaprop.com/images/products/GORI41.JPG http://www.getaprop.com/content-product_info/product_id-8279/gori_split_ring_zinc_28_30_props.html 155300 Gori Split Ring Zinc Anodes for 18"-20" Propellers... Zinc Ring Anode- 2pc. Outside Diameter: 3.25" Inside Diameter: 2.10" Height: 1.60" Weight: 1.89 Lbs. http://www.getaprop.com/content-product_info/product_id-8277/gori_split_ring_zinc_18_20_props.html http://www.getaprop.com/images/products/GORI41.JPG http://www.getaprop.com/content-product_info/product_id-8277/gori_split_ring_zinc_18_20_props.html Quicksilver Typhoon Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7665/quicksilver_typhoon_propeller_yamaha.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-7665/quicksilver_typhoon_propeller_yamaha.html Quicksilver Thunderbolt Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7664/quicksilver_thunderbolt_propeller_yamaha.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-7664/quicksilver_thunderbolt_propeller_yamaha.html Quicksilver Silverado Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7663/quicksilver_silverado_propeller_yamaha.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7663/quicksilver_silverado_propeller_yamaha.html Quicksilver Lightspeed Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7662/quicksilver_lightspeed_propeller_yamaha.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-7662/quicksilver_lightspeed_propeller_yamaha.html Quicksilver Diamond 4 Aluminum Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7661/quicksilver_diamond_4_propeller_yamaha.html http://www.getaprop.com/images/products/QS123[1][1].jpg http://www.getaprop.com/content-product_info/product_id-7661/quicksilver_diamond_4_propeller_yamaha.html Quicksilver Black Diamond & XT Aluminum Propeller fits 3.0L To 7.4L Yamaha Sterndrives... XT Series Larger Diameter for heavier boats Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7660/quicksilver_black_diamond_propeller_yamaha.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-7660/quicksilver_black_diamond_propeller_yamaha.html Quicksilver Typhoon Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-7647/quicksilver_typhoon_4_propeller_omc800.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-7647/quicksilver_typhoon_4_propeller_omc800.html Quicksilver Thunderbolt Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-7646/quicksilver_thunderbolt_propeller_omc800.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-7646/quicksilver_thunderbolt_propeller_omc800.html Quicksilver Silverado Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-7645/quicksilver_silverado_propeller_omc800.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7645/quicksilver_silverado_propeller_omc800.html Quicksilver Lightspeed Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-7644/quicksilver_lightspeed_propeller_omc800.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-7644/quicksilver_lightspeed_propeller_omc800.html Quicksilver Diamond-4 Aluminum Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-7643/quicksilver_diamond_4_propeller_omc800.html http://www.getaprop.com/images/products/QS123[1][1].jpg http://www.getaprop.com/content-product_info/product_id-7643/quicksilver_diamond_4_propeller_omc800.html Quicksilver Black Diamond Aluminum Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru Hub Exhaust 15 Tooth Spline Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-7642/quicksilver_black_diamond_propeller_omc800.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-7642/quicksilver_black_diamond_propeller_omc800.html Quicksilver Silverado Stainless Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Requires XHS Hub Kit #106 (Not Included) Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 Enhanced performance over comparable aluminum propellers All-purpose 3-blade stainless steel propeller Over 5 times more durable than an aluminum propeller High-polished stainless steel finish. http://www.getaprop.com/content-product_info/product_id-5171/quicksilver_silverado_propeller_omc400.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5171/quicksilver_silverado_propeller_omc400.html Quicksilver Lightspeed Stainless Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Requires XHS Hub Kit #106 (Not Included) Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 Enhanced performance over comparable aluminum propellers All-purpose 3-blade stainless steel propeller Over 5 times more durable than an aluminum propeller High-polished stainless steel finish http://www.getaprop.com/content-product_info/product_id-5170/quicksilver_lightspeed_propellers_omc400.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-5170/quicksilver_lightspeed_propellers_omc400.html Quicksilver Black Diamond Aluminum Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-5129/quicksilver_black_diamond_propeller_omc400.html http://www.getaprop.com/images/products/QS111.JPG http://www.getaprop.com/content-product_info/product_id-5129/quicksilver_black_diamond_propeller_omc400.html Quicksilver Bravo 3 Stainless Steel Propellers... This amazing twin-prop drive system features two stainless steel props, a large diameter forward propeller and a smaller diameter aft propeller for unbelievable handling and boat control. http://www.getaprop.com/content-product_info/product_id-7737/quicksilver_bravo_3_propeller_set.html http://www.getaprop.com/images/products/qsbr3.JPG http://www.getaprop.com/content-product_info/product_id-7737/quicksilver_bravo_3_propeller_set.html Mercury Quicksilver Bravo 2 Aluminum Propeller... All propellers are 3 blade for maximum speed and performance. Super soft forward and reverse engagement Factory installed rubber hub system is included with the propeller. Available in RH or LH rotations. http://www.getaprop.com/content-product_info/product_id-6737/quicksilver_bravo_2_propeller.html http://www.getaprop.com/images/products/merbrtwo.JPG http://www.getaprop.com/content-product_info/product_id-6737/quicksilver_bravo_2_propeller.html Quicksilver Typhoon 4 Blade Stainless Steel Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Equal to Mercury Offshore-4 Requires XHS Hub Kit 102 (Not Included) 4-Blade stainless steel design Delivers tough, durable performance Provides better acceleration, aggressive holding and tremendous bow lift For V-6 outboard and 3.0L - 5.7L Alpha sterndrive water ski, wakeboard and tubing boats. http://www.getaprop.com/content-product_info/product_id-7530/quicksilver_typhoon_propeller.html http://www.getaprop.com/images/products/QSTYPHOON.JPG http://www.getaprop.com/content-product_info/product_id-7530/quicksilver_typhoon_propeller.html Quicksilver Thunderbolt 3 Blade Stainless Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Requires XHS Hub Kit 102 (Not Included) 3-Blade stainless performance propeller with more blade area for large boats with bog V-6 outboards and V-8 sterndrives Outstanding on MerCruiser Bravo One and TRS Sterndrives Good prop for sport/performance style boats, cruisers and offshore boats Similar to the "Mercury Mirage" http://www.getaprop.com/content-product_info/product_id-7529/quicksilver_thunderbolt_propellers.html http://www.getaprop.com/images/products/QSTHUNDERBOLT.JPG http://www.getaprop.com/content-product_info/product_id-7529/quicksilver_thunderbolt_propellers.html Quicksilver Silverado 3 Blade Stainless Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Equal to Mercury Vengeance Requires XHS Hub Kit 102 (Not Included) Enhanced performance over comparable aluminum propellers All-purpose 3-blade stainless steel propeller Over 5 times more durable than an aluminum propeller High-polished stainless steel finish http://www.getaprop.com/content-product_info/product_id-7527/quicksilver_silverado_propeller.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7527/quicksilver_silverado_propeller.html Quicksilver QST-5 Blade Stainless Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Requires XHS Hub Kit 102 (Not Included) Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water http://www.getaprop.com/content-product_info/product_id-8168/quicksilver_qst_5_propeller.html http://www.getaprop.com/images/products/QS51.JPG http://www.getaprop.com/content-product_info/product_id-8168/quicksilver_qst_5_propeller.html Quicksilver Lightspeed 3 Blade Stainless Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Requires XHS Hub Kit 102 (Not Included) 3-Blade stainless propeller with high-rake design gives lots of bow lift. Vented for positive acceleration. Great for lighter weight boats with lots of power. Affordable replacement same as Mercury Laser II. http://www.getaprop.com/content-product_info/product_id-7528/quicksilver_lightspeed_propeller.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-7528/quicksilver_lightspeed_propeller.html Quicksilver Diamond 4 Aluminum Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Requires XHS Hub Kit 102 (Not Included) 4-Blade aluminum propeller Inexpensive and easy to repair Improves acceleration and mid-range performance on many boats. Better hole-shot and less vibration than 3-blade aluminum props http://www.getaprop.com/content-product_info/product_id-7526/quicksilver_diamond_4_propeller.html http://www.getaprop.com/images/products/QS123[1].jpg http://www.getaprop.com/content-product_info/product_id-7526/quicksilver_diamond_4_propeller.html Quicksilver Black Diamond 3 Blade Aluminum Propeller Fits Mercruiser Alpha & Bravo 1 Drives... Requires XHS Hub Kit 102 (Not Included) All-purpose 3-blade aluminum propeller Inexpensive and easy to repair Recommended for speeds less than 50 MPH and applications less than 250 HP http://www.getaprop.com/content-product_info/product_id-7525/quicksilver_black_diamond_propeller.html http://www.getaprop.com/images/products/QS111[2][2].jpg http://www.getaprop.com/content-product_info/product_id-7525/quicksilver_black_diamond_propeller.html Quicksilver Diamond 4 Aluminum Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust & 15 Tooth Spline 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Requires XHS Hub Kit # 103 (Not Included) http://www.getaprop.com/content-product_info/product_id-6068/quicksilver_diamond_4_propeller_yamaha.html http://www.getaprop.com/images/products/QS123[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6068/quicksilver_diamond_4_propeller_yamaha.html Quicksilver Black Diamond & XT Aluminum Propeller fits 150-300 HP Yamaha Outboards... XT Series Larger Diameter for heavier boats Thru-Hub Exhaust & 15 Tooth Spline 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Requires XHS Hub Kit # 103 (Not Included) http://www.getaprop.com/content-product_info/product_id-6044/quicksilver_black_diamond_propeller_yamaha.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-6044/quicksilver_black_diamond_propeller_yamaha.html Quicksilver Diamond-4 Aluminum Propeller fits 150-250 HP Suzuki Outboards... DT 150-150S HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986-2000 DT 225 HP 1990 and Newer DF 150,175,200,225,250 HP Requires XHS Hub Kit # 104 (Not Included) http://www.getaprop.com/content-product_info/product_id-5931/quicksilver_diamond_4_propeller_suzuki.html http://www.getaprop.com/images/products/QS123[1].jpg http://www.getaprop.com/content-product_info/product_id-5931/quicksilver_diamond_4_propeller_suzuki.html Quicksilver Black Diamond Aluminum Propeller fits 150-250 HP Suzuki Outboards... DT 150-150S HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986-2000 DT 225 HP 1990 and Newer DF 150,175,200,225,250 HP Requires XHS Hub Kit # 104 (Not Included) http://www.getaprop.com/content-product_info/product_id-5919/quicksilver_black_diamond_propeller_suzuki.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-5919/quicksilver_black_diamond_propeller_suzuki.html Quicksilver Diamond-4 Aluminum Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-5460/quicksilver_diamond_4_propeller_mercury.html http://www.getaprop.com/images/products/QS123[1][1].jpg http://www.getaprop.com/content-product_info/product_id-5460/quicksilver_diamond_4_propeller_mercury.html Quicksilver Black Diamond XT Aluminum Propeller fits 135-300 HP Mercury Outboards... (Larger Diameter/Extra Cup) Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-5453/quicksilver_black_diamond_xt_propeller_mercury.html http://www.getaprop.com/images/products/QS111[2][1].jpg http://www.getaprop.com/content-product_info/product_id-5453/quicksilver_black_diamond_xt_propeller_mercury.html Quicksilver Black Diamond Aluminum Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-5424/quicksilver_black_diamond_propeller_mercury.html http://www.getaprop.com/images/products/QS111[2][1].jpg http://www.getaprop.com/content-product_info/product_id-5424/quicksilver_black_diamond_propeller_mercury.html Quicksilver Diamond 4 Aluminum Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2003 and Newer 225 HP 2003 and Newer Requires XHS Hub Kit # 107 (Not Included) 2003 & Newer http://www.getaprop.com/content-product_info/product_id-7438/quicksilver_diamond_4_propeller_honda.html http://www.getaprop.com/images/products/QS123.JPG http://www.getaprop.com/content-product_info/product_id-7438/quicksilver_diamond_4_propeller_honda.html Quicksilver Black Diamond Aluminum Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 & V-8... 4 3/4 Gearcase 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2003 and Newer 225 HP 2003 and Newer Requires XHS Hub Kit # 107 (Not Included) 2003 & Newer http://www.getaprop.com/content-product_info/product_id-7437/quicksilver_black_diamond_propeller_honda.html http://www.getaprop.com/images/products/QS111.JPG http://www.getaprop.com/content-product_info/product_id-7437/quicksilver_black_diamond_propeller_honda.html Quicksilver Diamond-4 Aluminum Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-4813/quicksilver_diamond_4_propeller_e_j.html http://www.getaprop.com/images/products/QS123[1][1].jpg http://www.getaprop.com/content-product_info/product_id-4813/quicksilver_diamond_4_propeller_e_j.html Quicksilver Black Diamond Aluminum Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-4795/quicksilver_black_diamond_propeller_e_j.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-4795/quicksilver_black_diamond_propeller_e_j.html Quicksilver Silverado Stainless Propeller fits 50-130 HP Yamaha Outboards... T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others http://www.getaprop.com/content-product_info/product_id-6014/quicksilver_silverado_propeller_yamaha.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-6014/quicksilver_silverado_propeller_yamaha.html Quicksilver Lightspeed Stainless Propeller fits 50-130 HP Yamaha Outboards... T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others http://www.getaprop.com/content-product_info/product_id-6019/quicksilver_lightspeed_propeller_yamaha.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-6019/quicksilver_lightspeed_propeller_yamaha.html Quicksilver Black Diamond Aluminum Propeller fits 50-130 HP Yamaha Outboards... T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others http://www.getaprop.com/content-product_info/product_id-6007/quicksilver_black_diamond_propeller_yamaha.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-6007/quicksilver_black_diamond_propeller_yamaha.html Quicksilver Black Diamond Aluminum Propeller fits 60-140 HP Nissan Tohatsu Outboards... Requires XHS109 Hub Kit Thru Hub Exhaust & 15 Tooth Spline 60C HP Thru 1999 70C HP '96 & Newer 90HP '87 & Newer 115HP '92 & Newer 120HP '88 & Newer 140HP '88 & Newer http://www.getaprop.com/content-product_info/product_id-7386/quicksilver_black_diamond_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/QS111[2][1].jpg http://www.getaprop.com/content-product_info/product_id-7386/quicksilver_black_diamond_propeller_nissan_tohatsu.html Quicksilver Black Diamond Aluminum Propeller fits 40-140 HP Mercury Outboards... Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-5380/quicksilver_black_diamond_propeller_mercury.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-5380/quicksilver_black_diamond_propeller_mercury.html Quicksilver Silverado Stainless Propeller fits 40-140 HP Mercury Outboards... Equal to Mercury Vengeance Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-5389/quicksilver_silverado_propeller_mercury.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5389/quicksilver_silverado_propeller_mercury.html Quicksilver Lightspeed Stainless Propeller fits 40-140 HP Mercury Outboards... Equal to Mercury Laser II Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-5393/quicksilver_lightspeed_propeller_mercury.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-5393/quicksilver_lightspeed_propeller_mercury.html Quicksilver Silverado Stainless Propeller fits 75-130 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. http://www.getaprop.com/content-product_info/product_id-7425/quicksilver_silverado_propeller_honda.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7425/quicksilver_silverado_propeller_honda.html Quicksilver Lightspeed Stainless Propeller fits 75-130 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. http://www.getaprop.com/content-product_info/product_id-7426/quicksilver_lightspeed_propeller_honda.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-7426/quicksilver_lightspeed_propeller_honda.html Quicksilver Black Diamond Aluminum Propeller fits 75-130 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. http://www.getaprop.com/content-product_info/product_id-7424/quicksilver_black_diamond_propeller_honda.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-7424/quicksilver_black_diamond_propeller_honda.html Quicksilver Silverado Stainless Propeller fits 75-150 HP Force Outboards... Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer Requires XHS Hub Kit # 102 (Not Included) http://www.getaprop.com/content-product_info/product_id-4895/quicksilver_silverado_propeller_force.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-4895/quicksilver_silverado_propeller_force.html Quicksilver Lightspeed Stainless Propeller fits 75-150 HP Force Outboards... Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer Requires XHS Hub Kit # 102 (Not Included) http://www.getaprop.com/content-product_info/product_id-4899/quicksilver_lightspeed_propeller_force.html http://www.getaprop.com/images/products/QSLIGHTSPEED.JPG http://www.getaprop.com/content-product_info/product_id-4899/quicksilver_lightspeed_propeller_force.html Quicksilver Black Diamond Aluminum Propeller fits 75-150 HP Force Outboards... Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer Requires XHS Hub Kit # 102 (Not Included) http://www.getaprop.com/content-product_info/product_id-4885/quicksilver_black_diamond_propeller_force.html http://www.getaprop.com/images/products/qspae.JPG http://www.getaprop.com/content-product_info/product_id-4885/quicksilver_black_diamond_propeller_force.html Quicksilver Silverado Stainless Propeller fits 40-75 HP Force Outboards... 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-98 Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-4865/quicksilver_silverado_propeller_force.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-4865/quicksilver_silverado_propeller_force.html Quicksilver Silverado Stainless Propeller fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing http://www.getaprop.com/content-product_info/product_id-6001/quicksilver_silverado_propeller_yamaha.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-6001/quicksilver_silverado_propeller_yamaha.html Quicksilver Black Diamond Aluminum Propeller fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing http://www.getaprop.com/content-product_info/product_id-5985/quicksilver_black_diamond_propeller_yamaha.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-5985/quicksilver_black_diamond_propeller_yamaha.html Quicksilver Black Diamond Aluminum Propeller fits 35-65 HP Suzuki Outboards... Rubber Hub Bushing Thru Hub Exhaust & 13 Tooth Spline DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-7466/quicksilver_black_diamond_propeller_suzuki.html http://www.getaprop.com/images/products/qspae[1].jpg http://www.getaprop.com/content-product_info/product_id-7466/quicksilver_black_diamond_propeller_suzuki.html Quicksilver Silverado Stainless Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-5364/quicksilver_silverado_propeller_mercury.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-5364/quicksilver_silverado_propeller_mercury.html Quicksilver Black Diamond Aluminum Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-5347/quicksilver_black_diamond_propeller_mercury.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-5347/quicksilver_black_diamond_propeller_mercury.html Quicksilver Silverado Stainless Propeller fits 35-60 HP Honda Outboards... Rubber Hub Bushing Thru Hub Exhaust & 13 Tooth Spline BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer http://www.getaprop.com/content-product_info/product_id-7421/quicksilver_silverado_propeller_honda.html http://www.getaprop.com/images/products/QSSILVERADO.JPG http://www.getaprop.com/content-product_info/product_id-7421/quicksilver_silverado_propeller_honda.html Quicksilver Black Diamond Aluminum Propeller fits 40-75 HP Force Outboards... 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-98 Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-4850/quicksilver_black_diamond_propeller_force.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-4850/quicksilver_black_diamond_propeller_force.html Quicksilver Black Diamond Aluminum Propeller fits 20-30hp Yamaha Outboards... 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001 30 HP (Four Stroke) 2001 30 HP 1979 and Newer Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing http://www.getaprop.com/content-product_info/product_id-5978/quicksilver_black_diamond_propeller_yamaha.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-5978/quicksilver_black_diamond_propeller_yamaha.html Quicksilver Silverado Stainless Propeller fits 25 HP Force Outboards... Thru Hub Exhaust & 10 Tooth Spline 25 HP 3 Cyl. 1995 & Newer Rubber Hub Bushing http://www.getaprop.com/content-product_info/product_id-7488/quicksilver_silverado_propeller_force.html http://www.getaprop.com/images/products/QS1321[2].jpg http://www.getaprop.com/content-product_info/product_id-7488/quicksilver_silverado_propeller_force.html Quicksilver Black Diamond Aluminum Propeller fits 25 HP Force Outboards... Thru Hub Exhaust & 10 Tooth Spline 25 HP 3 Cyl. 1995 & Newer Rubber Hub Bushing http://www.getaprop.com/content-product_info/product_id-7487/quicksilver_black_diamond_propeller_force.html http://www.getaprop.com/images/products/QS111[2].jpg http://www.getaprop.com/content-product_info/product_id-7487/quicksilver_black_diamond_propeller_force.html Quicksilver Black Diamond Aluminum Propeller fits 9.9-15 HP Suzuki Outboards... Thru Hub Exhaust & 10 Tooth Spline. DT 9.9 1983-87 DT 15 1983-88 DT 15C 1989-97 DF 9.9 (Four Stroke) 1997 and Newer DF 15 (Four Stroke) 1997 and Newer Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-7446/quicksilver_black_diamond_propeller_suzuki.html http://www.getaprop.com/images/products/qass[1].jpg http://www.getaprop.com/content-product_info/product_id-7446/quicksilver_black_diamond_propeller_suzuki.html Quicksilver Black Diamond Aluminum Propeller fits 9.9-20 HP Honda Outboards... 8 HP 2001 & Newer 9.9 HP 1988 & Newer 15 HP 1988 & Newer 20 HP 2003 & Newer Rubber Hub Bushing. 8 Spline & Thru Hub Exhaust http://www.getaprop.com/content-product_info/product_id-7402/quicksilver_black_diamondpropeller_honda.html http://www.getaprop.com/images/products/qass.JPG http://www.getaprop.com/content-product_info/product_id-7402/quicksilver_black_diamondpropeller_honda.html Propeller Shaft Dia-7/8" Log Size(Hose I.D.)-1 1/2" Thru 2" Seal Length-2 1/2" Standard Size 1 3/4" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1478/norscot_shaft_seal_7_8.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1478/norscot_shaft_seal_7_8.html Propeller Shaft Dia-3/4" Log Size(Hose I.D.)1 1/2" Thru 2" Seal Length-2 1/2" Standard Size 1 3/4" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1472/norscot_shaft_seal_3_4.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1472/norscot_shaft_seal_3_4.html Propeller Shaft Dia-3" Log Size(Hose I.D.) 4" Thru 5" Seal Length-4 1/4" Standard Size 4 1/2" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1737/norscot_shaft_seal_3.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1737/norscot_shaft_seal_3.html Propeller Shaft Dia-2" Log Size(Hose I.D.) 3" Thru 3 1/2" Seal Length-3 3/4" Standard Size 3" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1723/norscot_shaft_seal_2.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1723/norscot_shaft_seal_2.html Propeller Shaft Dia-2 3/4" Log Size(Hose I.D.) 4" Thru 4 1/2" Seal Length-4 1/4" Standard Size 4" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1733/norscot_shaft_seal_2_3_4.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1733/norscot_shaft_seal_2_3_4.html Propeller Shaft Dia-2 1/4" Log Size(Hose I.D.) 3" Thru 4" Seal Length-3 7/8" Standard Size 3 1/2" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1727/norscot_shaft_seal_2_1_4.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1727/norscot_shaft_seal_2_1_4.html Propeller Shaft Dia-2 1/2" Log Size(Hose I.D.) 3 1/2" Thru 4" Seal Length-4" Standard Size 3 1/2" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1731/norscot_shaft_seal_2_1_2.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1731/norscot_shaft_seal_2_1_2.html Propeller Shaft Dia-1" Log Size(Hose I.D.) 1 1/2" Thru 2 1/2" Seal Length-2-3/4" Standard Size 2" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1482/norscot_shaft_seal_1.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1482/norscot_shaft_seal_1.html Propeller Shaft Dia-1 3/8" Log Size(Hose I.D.) 2" Thru 2 1/2" Seal Length-3" Standard Size 2 1/4" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1495/norscot_shaft_seal_1_3_8.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1495/norscot_shaft_seal_1_3_8.html Propeller Shaft Dia-1 3/4" Log Size(Hose I.D.) 2 1/2" Thru 3 1/2" Seal Length-3 5/8" Standard Size 3" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1720/norscot_shaft_seal_1_3_4.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1720/norscot_shaft_seal_1_3_4.html Propeller Shaft Dia-1 1/8" Log Size(Hose I.D.) 1 3/4" Thru 2 1/4" Seal Length-2-3/4" Standard Size 2" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1487/norscot_shaft_seal_1_1_8.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1487/norscot_shaft_seal_1_1_8.html Propeller Shaft Dia-1 1/4" Log Size(Hose I.D.) 1 3/4" Thru 2 3/4" Seal Length-3" Standard size 2 1/4" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1493/norscot_shaft_seal_1_1_4.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1493/norscot_shaft_seal_1_1_4.html Propeller Shaft Dia-1 1/2" Log Size(Hose I.D.) 2" Thru 3" Seal Length-3 5/16" Standard Size 2 1/2" GetaProp recommends Norscot for the following: No dripping, leaking, or spraying. Cast Bearing Bronze housing. No adjustments needed. No water needed for cooling. The oil seals, selected for this use have a proven history http://www.getaprop.com/content-product_info/product_id-1499/norscot_shaft_seal_1_1_2.html http://www.getaprop.com/images/products/norscott.jpg http://www.getaprop.com/content-product_info/product_id-1499/norscot_shaft_seal_1_1_2.html 205mm ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Bushing Kit Required 18.3mm to 14mm (Bolt Holes) Flange Diameter:205mm # Of Bolts:10 Bolt Diameter:14mm Bolt Circle:170mm Pilot Diameter:140mm Coupling Diameter:8 5/16" http://www.getaprop.com/content-product_info/product_id-1439/drivesaver_8010zb.html http://www.getaprop.com/images/products/Blue_Drivesaver_Low_Res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1439/drivesaver_8010zb.html 5" Borg Warner Solid Propeller Shaft Coupling... Bore Range:1" Thru 2" Flange Diameter:5" Bolt Diameter:7/16" # of Bolts:4 Bolt Circle:4 1/4" Pilot Diameter:2 1/2" x 3/32"M Coupling Length:2 5/8" http://www.getaprop.com/content-product_info/product_id-6946/borg_warner_solid_coupling_5.html http://www.getaprop.com/images/products/93325_B_A_50MC_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-6946/borg_warner_solid_coupling_5.html 5" Borg Warner... The R & D Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads. Capacity: HP/RPM=13 (HP x GearRatio x 100/Max Rated RPM) Flange Diameter:5" # Holes:4 Hole Diameter:0.44" Bolt Circle:4.25" Pilot Diameter:2.50" http://www.getaprop.com/content-product_info/product_id-2026/r_d_flex_coupling_910_009.html http://www.getaprop.com/images/products/flexshaftcoupling[1].jpg http://www.getaprop.com/content-product_info/product_id-2026/r_d_flex_coupling_910_009.html Shaft Size 20mm... Stern Tube Diameter 1 1/4" thru 2 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 20mm Stern Tube O.D. 1 1/4" thru 2 1/4" Oversized 2 1/2" Compressed Length: 6 1/4" Weight: 4 lbs. http://www.getaprop.com/content-product_info/product_id-2236/pss_shaft_seal_20mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-2236/pss_shaft_seal_20mm.html Shaft Diameter 22mm Stern Tube Diameter 1 1/4" thru 2 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 22mm Stern Tube O.D. 1 1/4" thru 2 1/4" Oversized 2 1/2" Compressed Length:6 1/4" http://www.getaprop.com/content-product_info/product_id-7708/pss_shaft_seal_22mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7708/pss_shaft_seal_22mm.html Shaft Diameter 25mm Stern Tube Diameter 1 1/4" thru 2 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 25mm Stern Tube O.D. 1 1/4" thru 2 1/4" Oversized 2 1/2" Compressed Length:6 1/4" http://www.getaprop.com/content-product_info/product_id-7709/pss_shaft_seal_25mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7709/pss_shaft_seal_25mm.html Shaft Diameter 28mm Stern Tube Diameter 1 1/4" thru 2 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 28mm Stern Tube O.D. 1 1/4" thru 2 1/4" Oversized 2 1/2" Compressed Length:6 1/4" http://www.getaprop.com/content-product_info/product_id-7710/pss_shaft_seal_28mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7710/pss_shaft_seal_28mm.html Shaft Diameter 30mm Stern Tube Diameter 1 1/4" thru 2 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 30mm Stern Tube O.D. 1 1/4" thru 2 1/4" Oversized 2 1/2" Compressed Length:6 1/4" http://www.getaprop.com/content-product_info/product_id-7711/pss_shaft_seal_30mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7711/pss_shaft_seal_30mm.html Shaft Diameter 32mm Stern Tube Diameter 1 3/4" thru 3 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 32mm Stern Tube O.D. 1 3/4" thru 2 1/2" Oversized 2 3/4" Thru 3 1/2" Compressed Length:6 1/2" Weight 5 Lbs. http://www.getaprop.com/content-product_info/product_id-7712/pss_shaft_seal_32mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7712/pss_shaft_seal_32mm.html Shaft Diameter 35mm Stern Tube Diameter 1 3/4" thru 3 1/2" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 35mm Stern Tube O.D. 1 3/4" thru 2 1/2" Oversized: 2 3/4" Thru 3 1/2" Compressed Length:6 1/2" Weight 5 Lbs. http://www.getaprop.com/content-product_info/product_id-7713/pss_shaft_seal_35mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7713/pss_shaft_seal_35mm.html Shaft Diameter 38mm Stern Tube Diameter 2" thru 4" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 38mm Stern Tube O.D. 2" thru 3 1/2" Oversized: 3 3/4" Thru 4" Compressed Length:8 1/8" Weight 6 Lbs. http://www.getaprop.com/content-product_info/product_id-7714/pss_shaft_seal_38mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7714/pss_shaft_seal_38mm.html Shaft Diameter 40mm Stern Tube Diameter 2" thru 4" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 40mm Stern Tube O.D. 2" thru 3 1/2" Oversized: 3 3/4" Thru 4" Compressed Length:8 1/8" Weight 6 Lbs. http://www.getaprop.com/content-product_info/product_id-7715/pss_shaft_seal_40mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7715/pss_shaft_seal_40mm.html Shaft Diameter 45mm Stern Tube Diameter 2 1/4" thru 4" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 45mm Stern Tube O.D. 2 1/4" thru 3 1/2" Oversized: 3 3/4" Thru 4" Compressed Length:8 1/8" Weight 10 Lbs. http://www.getaprop.com/content-product_info/product_id-7716/pss_shaft_seal_45mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7716/pss_shaft_seal_45mm.html Shaft Diameter 50mm Stern Tube Diameter 2 1/2" thru 4" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 50mm Stern Tube O.D. 2 1/2" thru 3 1/2" Oversized: 3 3/4" Thru 4" Compressed Length:8 1/8" Weight 10 Lbs. http://www.getaprop.com/content-product_info/product_id-7717/pss_shaft_seal_50mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7717/pss_shaft_seal_50mm.html Shaft Diameter 55mm Stern Tube Diameter 2 1/2" thru 4" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 55mm Stern Tube O.D. 2 1/2" thru 3 1/2" Oversized: 3 3/4" Thru 4" Compressed Length:8 1/8" Weight 10 Lbs. http://www.getaprop.com/content-product_info/product_id-7718/pss_shaft_seal_55mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7718/pss_shaft_seal_55mm.html Shaft Diameter 60mm Stern Tube Diameter 3 1/4" thru 5" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 60mm Stern Tube O.D. 3 1/4" thru 4" Oversized: 4 1/4" Thru 5" Compressed Length:8 1/2" Weight 12 Lbs. http://www.getaprop.com/content-product_info/product_id-7719/pss_shaft_seal_60mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7719/pss_shaft_seal_60mm.html Shaft Diameter 65mm Stern Tube Diameter 3 1/4" thru 5" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 65mm Stern Tube O.D. 3 1/4" thru 4" Oversized: 4 1/4" Thru 5" Compressed Length:8 1/2" Weight 12 Lbs. http://www.getaprop.com/content-product_info/product_id-7720/pss_shaft_seal_65mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7720/pss_shaft_seal_65mm.html Shaft Diameter 80mm Stern Tube Diameter 4" thru 6" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 80mm Stern Tube O.D. 4" thru 5" Oversized: 5 1/4" Thru 6" Compressed Length:9 1/4" Weight 14 Lbs. http://www.getaprop.com/content-product_info/product_id-7723/pss_shaft_seal_80mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7723/pss_shaft_seal_80mm.html Shaft Diameter 75mm Stern Tube Diameter 4" thru 6" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 75mm Stern Tube O.D. 4" thru 5" Oversized: 5 1/4" Thru 6" Compressed Length:9 1/4" Weight 14 Lbs. http://www.getaprop.com/content-product_info/product_id-7722/pss_shaft_seal_75mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7722/pss_shaft_seal_75mm.html Shaft Diameter 70mm Stern Tube Diameter 4" thru 6" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 70mm Stern Tube O.D. 4" thru 5" Oversized: 5 1/4" Thru 6" Compressed Length:9 1/4" Weight 14 Lbs. http://www.getaprop.com/content-product_info/product_id-7721/pss_shaft_seal_70mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7721/pss_shaft_seal_70mm.html Shaft Diameter 95mm Stern Tube Diameter 4 1/2" thru 6" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 95mm Stern Tube O.D. 4 1/2" thru 6" Compressed Length:9 3/4" Weight 20 Lbs. http://www.getaprop.com/content-product_info/product_id-7726/pss_shaft_seal_95mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7726/pss_shaft_seal_95mm.html Shaft Diameter 90mm Stern Tube Diameter 4 1/2" thru 6" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 90mm Stern Tube O.D. 4 1/2" thru 6" Compressed Length:9 3/4" Weight 16 Lbs. http://www.getaprop.com/content-product_info/product_id-7725/pss_shaft_seal_90mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7725/pss_shaft_seal_90mm.html Shaft Diameter 85mm Stern Tube Diameter 4 1/2" thru 6" The PSS Shaft Seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion. Shaft Size: 85mm Stern Tube O.D. 4 1/2" thru 6" Compressed Length:9 3/4" Weight 16 Lbs. http://www.getaprop.com/content-product_info/product_id-7724/pss_shaft_seal_85mm.html http://www.getaprop.com/images/products/hispeedshaftseal.jpg http://www.getaprop.com/content-product_info/product_id-7724/pss_shaft_seal_85mm.html A great time-saver. Protects the propeller, the shaft, and the bearings. Pulls 2, 3, and 4-blade wheels (24"- 80") quickly, without disturbing close coupled rudders. Requires only minimum clearance between the hub and strut or stern bearings. http://www.getaprop.com/content-product_info/product_id-1230/algonac_propeller_puller_b.html http://www.getaprop.com/images/products/photo_puller_2[1].gif http://www.getaprop.com/content-product_info/product_id-1230/algonac_propeller_puller_b.html 15" Autostream 3 Blade Self Feathering Stainless Steel Propeller fits shaft diameters 1" thru 1 1/2"... <center><hr><b><font color="#ff0000" size=3>Vessel data required for order.</font> Click <a href="http://northharborpropeller.com/form_refit.cfm" target="blank" >here</a> to submit information.</b><hr></center><br> +New blade design is up to 20% more efficient than previous model +Use of Duplex 2507 for the blades allows a very thin cross section, while retaining great strength +Body components cast in 316L Stainless +"O" ring seals on the blades and main gear hub prevent loss of grease +Simple screw and locknut pitch adjustment can be adjusted easily, even while in the water +Independent ahead and astern pitch adjustment, allows optimum ahead pitch and fine reverse pitch for maximum thrust and minimum "prop walk" +Dual blade bearings support the blade either side of the gear for increased rigidity +Oversize dowels locate blade assembly and transmit driving torque +6 x 8mm cap head screws lockwired in place for security provide a very robust construction +Sacrificial zinc anode tail cone with stainless steel core. A single Nylok nut makes in water replacement easy +Single permanently fitted grease nipple/"zerk" lubrication point, enables easy in water lubrication of all bearing areas (required annually) +No expensive specialist greases required +User replaceable Delrin and nickel aluminium bronze bearings throughout +Five-year warranty against material and manufacturing defects +Range covers 15 to 20 for engines up to 85hp/60Kw http://www.getaprop.com/content-product_info/product_id-7762/autostream_self_feathering_propeller_15.html http://www.getaprop.com/images/products/autostream.jpg http://www.getaprop.com/content-product_info/product_id-7762/autostream_self_feathering_propeller_15.html Autostream Propeller Anode fits S1 & S2 Series Propellers... Body length: 1.50" Tube Length: 1.50" Base Dia: 2.25" Tube Diameter: 0.391" http://www.getaprop.com/content-product_info/product_id-8806/autostream_s1_2_propeller_anode.html http://www.getaprop.com/images/products/anut.jpg http://www.getaprop.com/content-product_info/product_id-8806/autostream_s1_2_propeller_anode.html Autostream Propeller Anode fits S3000 Series Propellers... Body length: 2.625" Tube Length: 2.625" Base Dia: 2.50" Tube Diameter: 0.391" http://www.getaprop.com/content-product_info/product_id-8824/autostream_s_3000_propeller_anode.html http://www.getaprop.com/images/products/anyu.jpg http://www.getaprop.com/content-product_info/product_id-8824/autostream_s_3000_propeller_anode.html Autostream Propeller Anode fits S2000 Series Propellers... Body length: 2.50" Tube Length: 2.50" Base Dia: 2.25" Tube diameter: 0.391" http://www.getaprop.com/content-product_info/product_id-9082/autostream_s_2000_propeller_anode.html http://www.getaprop.com/images/products/S2000 copy.jpg http://www.getaprop.com/content-product_info/product_id-9082/autostream_s_2000_propeller_anode.html 4" ZF-Hurth... The R & D Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads. Capacity: HP/RPM=5 (HP x GearRatio x 100/Max Rated RPM) Flange Diameter:4" # Holes:4 Hole Diameter:0.39" Bolt Circle:3.25" Pilot Diameter:2.50" http://www.getaprop.com/content-product_info/product_id-7986/r_d_flex_coupling_910_001.html http://www.getaprop.com/images/products/flexshaftcoupling[1].jpg http://www.getaprop.com/content-product_info/product_id-7986/r_d_flex_coupling_910_001.html 4"ZF/Hurth... The R & D Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads. Capacity: HP/RPM=3 (HP x GearRatio x 100/Max Rated RPM) Flange Diameter:4" # Holes:4 Hole Diameter:0.39" Bolt Circle:3.25" Pilot Diameter:2.50" http://www.getaprop.com/content-product_info/product_id-7988/r_d_flex_coupling_910_014.html http://www.getaprop.com/images/products/flexshaftcoupling[1].jpg http://www.getaprop.com/content-product_info/product_id-7988/r_d_flex_coupling_910_014.html 1000ML Propgold Kit. Foul release coating system for propellers and running gear. It is established that energy savings are achieved by maintaining smooth underwater hull and propeller surfaces. Presence of fouling on propellers is detrimental to the performance of the propeller. Even low levels of fouling on propeller surfaces are shown to cause efficiency losses of 20%. High levels of fouling cause up to 70% decrease in efficiency. PropGold is suitable for application to all underwater metallic running gear Propellers & Trim tabs Propeller shafts & Rudders Prop struts - Bow & stern thrusters Coverage for a pair of 48" 5 Blade propellers http://www.getaprop.com/content-product_info/product_id-9066/propgold_1000_running_gear_coating.html http://www.getaprop.com/images/products/pg10000a copy.jpg http://www.getaprop.com/content-product_info/product_id-9066/propgold_1000_running_gear_coating.html 500ML Propgold Kit. Foul release coating system for propellers and running gear. It is established that energy savings are achieved by maintaining smooth underwater hull and propeller surfaces. Presence of fouling on propellers is detrimental to the performance of the propeller. Even low levels of fouling on propeller surfaces are shown to cause efficiency losses of 20%. High levels of fouling cause up to 70% decrease in efficiency. PropGold is suitable for application to all underwater metallic running gear: Propellers & Trim tabs Propeller shafts & Rudders Prop struts - Bow & stern thrusters Coverage for a pair of 32" 5 Blade propellers http://www.getaprop.com/content-product_info/product_id-9065/propgold_500_running_gear_coating.html http://www.getaprop.com/images/products/propgoldA copy.jpg http://www.getaprop.com/content-product_info/product_id-9065/propgold_500_running_gear_coating.html 500ML Propspeed Kit. Getaprop has seen first hand how PROPSPEED has revolutionized the marine industry by manufacturing a "Low VOC" environmentally friendly coating specifically designed to prevent marine growth from bonding to any metal surface below the waterline. Uses include props, shafts, struts, rudders, trim tabs and thru hull fittings. PropSpeed has been tested in the harshest marine environments. Additionally, independent tests confirm that PropSpeed prevents marine growth from attaching to your running gear, resulting in increased speed and reduced fuel consumption. Coverage for a pair of 38" 5 Blade propellers. http://www.getaprop.com/content-product_info/product_id-6150/propspeed_running_gear_coating.html http://www.getaprop.com/images/products/664f_1[1].jpg http://www.getaprop.com/content-product_info/product_id-6150/propspeed_running_gear_coating.html 1000ML.Propspeed Kit. Getaprop has seen first hand how PROPSPEED has revolutionized the marine industry by manufacturing a "Low VOC" environmentally friendly coating specifically designed to prevent marine growth from bonding to any metal surface below the waterline. Uses include props, shafts, struts, rudders, trim tabs and thru hull fittings. PropSpeed has been tested in the harshest marine environments. Additionally, independent tests confirm that PropSpeed prevents marine growth from attaching to your running gear, resulting in increased speed and reduced fuel consumption. Coverage for a pair of 50" 5 Blade propellers. http://www.getaprop.com/content-product_info/product_id-6151/propspeed_running_gear_coating.html http://www.getaprop.com/images/products/664f_1[1].jpg http://www.getaprop.com/content-product_info/product_id-6151/propspeed_running_gear_coating.html 200ML Propspeed Kit. Getaprop has seen first hand how PROPSPEED has revolutionized the marine industry by manufacturing a "Low VOC" environmentally friendly coating specifically designed to prevent marine growth from bonding to any metal surface below the waterline. Uses include propellers, shafts, struts, rudders, trim tabs and thru hull fittings. PropSpeed has been tested in the harshest marine environments. Additionally, independent tests confirm that PropSpeed prevents marine growth from attaching to your running gear, resulting in increased speed and reduced fuel consumption. Coverage for a pair of 24" 4 Blade propellers http://www.getaprop.com/content-product_info/product_id-6149/propspeed_running_gear_coating.html http://www.getaprop.com/images/products/664f_1[1].jpg http://www.getaprop.com/content-product_info/product_id-6149/propspeed_running_gear_coating.html 15 LH 19 Michigan 3 Blade Stainless High Speed Long Hub Propeller For Volvo Penta SP200-290 Drives... Builder return, ready to install, new condition... The increased blade area of the high speed propeller makes it most suitable for use with high power engines and at high revs. In a fast boat this does not only mean increased speed, it also means that a heavily loaded boat will plane more quickly and enjoy better fuel economy. The high speed propeller's excellent reversing characteristics also means faster and safer quayside maneuvering. http://www.getaprop.com/content-product_info/product_id-9000/michigan_long_hub_stainless_083003.html http://www.getaprop.com/images/products/vp copy.jpg http://www.getaprop.com/content-product_info/product_id-9000/michigan_long_hub_stainless_083003.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper.Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9077/propsmith_2_00.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9077/propsmith_2_00.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper.Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-6413/propsmith_2_00.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-6413/propsmith_2_00.html GetaGrop has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9069/propsmith_5_00.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9069/propsmith_5_00.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara... http://www.getaprop.com/content-product_info/product_id-9070/propsmith_4_50.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9070/propsmith_4_50.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara.. http://www.getaprop.com/content-product_info/product_id-9071/propsmith_4_00.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9071/propsmith_4_00.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper.Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9078/propsmith_1_75.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9078/propsmith_1_75.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9076/propsmith_2_25.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9076/propsmith_2_25.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9075/propsmith_2_50.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9075/propsmith_2_50.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9074/propsmith_2_75.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9074/propsmith_2_75.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9073/propsmith_3_00.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9073/propsmith_3_00.html GetaProp has the only tool that is both a prop pusher as well as a prop puller, with the substantial force that is developed pressing the hub directly in line with the shaft, either onto or off the taper. Used and recommended by many quality boat builders, including Viking, Hatteras, Cabo, Delta, Tiara, Ocean, Albemarle, Post, Rampage, SeaRay, Sculley, Burger, Spencer, Lazzara. http://www.getaprop.com/content-product_info/product_id-9072/propsmith_3_50.html http://www.getaprop.com/images/products/prop103[1].jpg http://www.getaprop.com/content-product_info/product_id-9072/propsmith_3_50.html 18 1/2" Power Tech 4 Blade Bravo 2 Stainless Steel Propeller... Available with Cushion Lock Hub System or Rubber Hub Bushing... PowerTech! Stainless Steel Propellers are cast in one integral piece in a ceramic mold. This process is used by all motor manufacturers as well as a few leading propeller manufacturers. The extra expense is well worth the outlay compared to the cheaper "weld-on blade" process. http://www.getaprop.com/content-product_info/product_id-7327/power_tech_bravo_2_propeller.html http://www.getaprop.com/images/products/PTBRS4R copy.jpg http://www.getaprop.com/content-product_info/product_id-7327/power_tech_bravo_2_propeller.html 17 1/4" Power Tech 4 Blade Bravo 2 Stainless Steel Propeller... Available with Cushion Lock Hub System or Rubber Hub Bushing... PowerTech! Stainless Steel Propellers are cast in one integral piece in a ceramic mold. This process is used by all motor manufacturers as well as a few leading propeller manufacturers. The extra expense is well worth the outlay compared to the cheaper "weld-on blade" process. http://www.getaprop.com/content-product_info/product_id-8283/power_tech_bravo_2_propeller.html http://www.getaprop.com/images/products/PT3[1].jpg http://www.getaprop.com/content-product_info/product_id-8283/power_tech_bravo_2_propeller.html 14 X 18 X 4 LH Cupped 1 1/8"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3176/michigan_ambush_propeller_635403.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3176/michigan_ambush_propeller_635403.html 14 X 18 X 4 RH Cupped 1 1/8"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3175/michigan_ambush_propeller_635402.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3175/michigan_ambush_propeller_635402.html 14 X 18 X 4 LH Cupped 1"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3174/michigan_ambush_propeller_635401.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3174/michigan_ambush_propeller_635401.html 14 X 18 X 4 RH Cupped 1"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3173/michigan_ambush_propeller_635400.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3173/michigan_ambush_propeller_635400.html 13 X 16 X 4 RH CUPPED 1 1/8"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3172/michigan_ambush_propeller_635302.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3172/michigan_ambush_propeller_635302.html 13 X 16 X 4 RH CUPPED 1"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3171/michigan_ambush_propeller_635300.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3171/michigan_ambush_propeller_635300.html 13 X 13 X 4 LH CUPPED 1 1/8"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3170/michigan_ambush_propeller_635103.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3170/michigan_ambush_propeller_635103.html 13 X 13 X 4 LH CUPPED 1"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-3169/michigan_ambush_propeller_635101.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-3169/michigan_ambush_propeller_635101.html 13 X 13 X 4 LH CUPPED 1"... Highly accurate CNC manufacturing process. Our lowest priced ski boat propeller that delivers top performance. All sizes offered are normally in stock for fast delivery. Made in the U.S.A by Michigan Wheel Corporation Grand Rapids, Michigan http://www.getaprop.com/content-product_info/product_id-6393/michigan_ambush_propeller_13.html http://www.getaprop.com/images/products/24420_1252114[1].jpg http://www.getaprop.com/content-product_info/product_id-6393/michigan_ambush_propeller_13.html OJ Spare Propeller Puller Kit... (PROPELLER NOT INCLUDED)The OJ Propeller Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/8" prop shaft. OJ Propeller Puller is a precision tool essential to remove any ski boat propeller with ease. OJ wrench designed to fit the propeller nut and prop puller. Spare set of propeller shaft hardware, nut, key and cotter pin. http://www.getaprop.com/content-product_info/product_id-3179/oj_spare_propeller_puller_kit.html http://www.getaprop.com/images/products/16607[1].jpg http://www.getaprop.com/content-product_info/product_id-3179/oj_spare_propeller_puller_kit.html OJ Propeller Puller Kit...The OJ Propeller Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/8" prop shaft. OJ Propeller Puller is a precision tool essential to remove any ski boat propeller with ease. OJ wrench designed to fit the propeller nut and prop puller. Spare set of propeller shaft hardware, nut, key and cotter pin. http://www.getaprop.com/content-product_info/product_id-3177/oj_propeller_puller_kit.html http://www.getaprop.com/images/products/16937[1].jpg http://www.getaprop.com/content-product_info/product_id-3177/oj_propeller_puller_kit.html OJ Propeller Puller ...The OJ Propeller Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/8" prop shaft. The OJ Propeller Puller is a precision tool essential to remove any ski boat propeller. Cast in stainless steel and powder coated to last the life of your boat. http://www.getaprop.com/content-product_info/product_id-3178/oj_propeller_puller.html http://www.getaprop.com/images/products/16611[1].jpg http://www.getaprop.com/content-product_info/product_id-3178/oj_propeller_puller.html OJ Spare Propeller Puller Kit... (PROPELLER NOT INCLUDED)The OJ Propeller Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/8" prop shaft. OJ Propeller Puller is a precision tool essential to remove any ski boat propeller with ease. OJ wrench designed to fit the propeller nut and prop puller. Spare set of propeller shaft hardware, nut, key and cotter pin. http://www.getaprop.com/content-product_info/product_id-6407/oj_spare_propeller_puller_kit.html http://www.getaprop.com/images/products/16607[1].jpg http://www.getaprop.com/content-product_info/product_id-6407/oj_spare_propeller_puller_kit.html OJ Propeller Puller Kit...The OJ Propeller Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/8" prop shaft. OJ Propeller Puller is a precision tool essential to remove any ski boat propeller with ease. OJ wrench designed to fit the propeller nut and prop puller. Spare set of propeller shaft hardware, nut, key and cotter pin. http://www.getaprop.com/content-product_info/product_id-6406/oj_propeller_puller_kit.html http://www.getaprop.com/images/products/16937[1].jpg http://www.getaprop.com/content-product_info/product_id-6406/oj_propeller_puller_kit.html OJ Propeller Puller ...The OJ Propeller Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/8" prop shaft. The OJ Propeller Puller is a precision tool essential to remove any ski boat propeller. Cast in stainless steel and powder coated to last the life of your boat. http://www.getaprop.com/content-product_info/product_id-6405/oj_propeller_puller.html http://www.getaprop.com/images/products/16611[1].jpg http://www.getaprop.com/content-product_info/product_id-6405/oj_propeller_puller.html 9" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Requires Bushing Kit 3/4" to 5/8" (Bolt Holes) Flange Diameter:9" # Of Bolts:8 Bolt Diameter:5/8" Bolt Circle:7 1/2" Pilot Diameter:6" Coupling Diameter:11" http://www.getaprop.com/content-product_info/product_id-7995/drivesaver_908a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-7995/drivesaver_908a.html 10 1/2" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Bushing Kit Required 1" to 3/4" (Bolt Holes) Flange Diameter:10 1/2" # Of Bolts:8 Bolt Diameter:3/4" Bolt Circle:8 3/4" Pilot Diameter:5" Coupling Diameter:12 1/2" http://www.getaprop.com/content-product_info/product_id-1445/drivesaver_1058.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1445/drivesaver_1058.html Beneteau Prop Nut Complete ... 45mm Shafts Propeller Nut zincs add extra protection to both your propeller and drive shaft.The zinc anode is screwed to the nut and can be easily replaced when needed. http://www.getaprop.com/content-product_info/product_id-7093/beneteau_propeller_zinc_nut_45mm.html http://www.getaprop.com/images/products/111.JPG http://www.getaprop.com/content-product_info/product_id-7093/beneteau_propeller_zinc_nut_45mm.html Beneteau Prop Nut Complete ... 40mm Shafts Propeller Nut zincs add extra protection to both your propeller and drive shaft.The zinc anode is screwed to the nut and can be easily replaced when needed. http://www.getaprop.com/content-product_info/product_id-7092/beneteau_propeller_zinc_nut_40mm.html http://www.getaprop.com/images/products/111.JPG http://www.getaprop.com/content-product_info/product_id-7092/beneteau_propeller_zinc_nut_40mm.html Beneteau Prop Nut Complete ... 35mm Shafts Propeller Nut zincs add extra protection to both your propeller and drive shaft.The zinc anode is screwed to the nut and can be easily replaced when needed. http://www.getaprop.com/content-product_info/product_id-7091/beneteau_propeller_zinc_nut_35mm.html http://www.getaprop.com/images/products/111.JPG http://www.getaprop.com/content-product_info/product_id-7091/beneteau_propeller_zinc_nut_35mm.html Beneteau Prop Nut Complete ... 22 & 25mm Shafts Propeller Nut zincs add extra protection to both your propeller and drive shaft.The zinc anode is screwed to the nut and can be easily replaced when needed. http://www.getaprop.com/content-product_info/product_id-7089/beneteau_propeller_zinc_nut_22_25mm.html http://www.getaprop.com/images/products/111.JPG http://www.getaprop.com/content-product_info/product_id-7089/beneteau_propeller_zinc_nut_22_25mm.html Beneteau Prop Nut Complete ... 30mm Shafts Propeller Nut zincs add extra protection to both your propeller and drive shaft.The zinc anode is screwed to the nut and can be easily replaced when needed. http://www.getaprop.com/content-product_info/product_id-7090/beneteau_propeller_zinc_nut_30mm.html http://www.getaprop.com/images/products/111.JPG http://www.getaprop.com/content-product_info/product_id-7090/beneteau_propeller_zinc_nut_30mm.html X PROPS SERIES YF-SC-X Fits 2000-2001 Yamaha 1200cc Jet Boats... (13/16) 2000-2001 XR 1800 Engine CC: 1200 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-8036/solas_impeller_yamaha_yf_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-8036/solas_impeller_yamaha_yf_sc_x.html CONCORD SERIES YF-CD Fits 2000-2001 Yamaha 1200cc Jet Boats... (13/19) 2000-2001 XR1800 Engine CC: 1200 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-8031/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8031/solas_impeller_yamaha_yf_cd.html X PROP SERIES YD-SC-X Fits 1998-2005 Yamaha 1200cc Jet Boats... (13/16) 1998-2000 EXCITER 270 1999-2002 LS 2000 1999-2002 LX 2000 2003-2005 LX 210 2004-2005 AR 210 Engine CC: 1200 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. http://www.getaprop.com/content-product_info/product_id-8029/solas_impeller_yamaha_yd_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-8029/solas_impeller_yamaha_yd_sc_x.html IJK SERIES YD-SC-I Fits 1998-2000 Yamaha 1200cc Yamaha Jet Boats... (13/19) 1998-2000 EXCITER 135 1998-2000 EXCITER 270 Engine CC: 1200 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-8028/solas_impeller_yamaha_yd_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8028/solas_impeller_yamaha_yd_sc_i.html CONCORD SERIES YD-CD Fits 1999-2005 Yamaha 1200cc Jet Boats... (13/19) 1999-2002 LS2000 1999-2002 LX2000 2003-2005 LX210 2004-2005 AR210 Engine CC: 1200 Wrench Impeller: WR007 Seal: SLA009A Holder: WROO4H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-8030/solas_impeller_yamaha_yd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8030/solas_impeller_yamaha_yd_cd.html IJK SERIES YD-SC-I Fits 1997-1998 Yamaha 1100cc Jet Boats... (13/19) 1997-1998 EXCITER 220 Engine CC: 1100 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-8034/solas_impeller_yamaha_yd_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8034/solas_impeller_yamaha_yd_sc_i.html DYNAFLY SERIES YG-DF Fits 2005 Yamaha 1052cc Jet Boats... (14/20) 2005 SX 230 2005 AR 230 HIGH OUTPUT Engine CC: 1052 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H Our new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-8038/solas_impeller_yamaha_yg_df.html http://www.getaprop.com/images/products/dynafly[1].gif http://www.getaprop.com/content-product_info/product_id-8038/solas_impeller_yamaha_yg_df.html X PROPS SERIES YF-SC-X Fits 2004-2005 Yamaha 989cc Jet Boats... (13/16) 2004-2005 SX230 2004-2005 SR230 2004-2005 AR230 Engine CC: 989 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-8037/solas_impeller_yamaha_yf_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-8037/solas_impeller_yamaha_yf_sc_x.html CONCORD SERIES YF-CD Fits 2004-2005 Yamaha 998cc Jet Boats... (12/18) 2004-2005 SX 230 2004-2005 SR 230 2004-2005 AR 230 Engine CC: 998 Impeller Wrench: WR007 Seal: SLA009 Holder: WR007H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-8035/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8035/solas_impeller_yamaha_yf_cd.html CONCORD SERIES YF-CD Fits 2003-2004 Yamaha 1300cc PWC... (13/19) 2003-2004 Wave Runner GP1300R Engine CC: 1300 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-7885/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7885/solas_impeller_yamaha_yf_cd.html CONCORD SERIES YF-CD Fits 2000-2002 Yamaha 1200cc PWC (13/19) 2000-02 WAVE RUNNER GP1200R Engine CC: 1200 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-7887/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7887/solas_impeller_yamaha_yf_cd.html CONCORD SERIES YF-CD Fits 1998-2005 Yamaha 1200cc PWC (12/18) 1999-05 WAVE RUNNER XLT 1200 1999-03 WAVE RUNNER SUV 1200 1998-99 WAVE RUNNER XL 1200 Engine CC: 1200 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-7886/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7886/solas_impeller_yamaha_yf_cd.html X-PROP SERIES YD-SC-XO Fits 1997-1999 Yamaha 1200cc PWC... (14.5/17.5) 1997-99 WAVE RUNNER GP-1200 1999 WAVE RUNNER GP-1200R Engine CC: 1200 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. You can trust the harsh field-testing of the X prop by Team SOLAS. http://www.getaprop.com/content-product_info/product_id-7889/solas_impeller_yamaha_yd_sc_xo.html http://www.getaprop.com/images/products/XPROP.JPG http://www.getaprop.com/content-product_info/product_id-7889/solas_impeller_yamaha_yd_sc_xo.html CONCORD SERIES YD-CD Fits 1997-1999 Yamaha 1200cc PWC... (13/19) 1997-99 WAVERUNNER GP1200 1999 WAVERUNNER GP1200R Engine CC: 1200 Wrench Impeller: 08-WR007 Seal: 08-SLA009A Holder: WR004H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. Engine CC: 1200 Wrench Impeller: 08-WR004 Seal: 08-SLA009A http://www.getaprop.com/content-product_info/product_id-7888/solas_impeller_yamaha_yd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7888/solas_impeller_yamaha_yd_cd.html X PROP SERIES YD-SC-X Fits 1995-1997 Yamaha 1100cc PWC... (13/16) 1995-1997 WAVE RAIDER 1100 1995-1997 WAVE VENTURE 1100 Engine CC: 1100 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. http://www.getaprop.com/content-product_info/product_id-8032/solas_impeller_yamaha_yd_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-8032/solas_impeller_yamaha_yd_sc_x.html IJK SERIES YD-SC-I Fits 1995-1997 Yamaha 1100cc PWC... (13/19) 1995-1997 WAVERAIDER 1100 1995-1997 WAVEVENTURE 1100 Engine CC: 1100 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-8033/solas_impeller_yamaha_yd_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8033/solas_impeller_yamaha_yd_sc_i.html CONCORD SERIES YD-CD Fits 1995-1997 Yamaha 1200cc PWC... (12/18) 1995-1997 WAVERAIDER 1100 1995-1997 WAVEVENTURE 1100 Engine CC: 1100 Wrench Impeller: WR007 Seal: SLA009A Holder: WR004H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. Engine CC: 1200 Wrench Impeller: 08-WR004 Seal: 08-SLA009A http://www.getaprop.com/content-product_info/product_id-8027/solas_impeller_yamaha_yd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8027/solas_impeller_yamaha_yd_cd.html CONCORD SERIES YH-CD Fits 2005-2007 Yamaha 1052cc PWC... (18/24) 2005-07 VX 2005-07 VX SPORT 2005-2007 VX DELUXE 2005-2007 VX CRUISER Engine CC: 1052 Wrench Impeller: WR001 Seal: SLA009 CONCORD - THE POWER TORQUE SERIES In 1998, Solas introduced the Concord series of impellers featuring a new radial leading edge with Solas innovative blade designs. The Concord is designed to provide PWC lovers a different taste of blast-off and plenty of joys in hook-up. Feels So Good could be your words to describe Concord. Especially in choppy water, this unique impeller series will enhance your all-range maneuverability without slippage. For customers looking for family fun, the Solas Concord series offers excellent weight carrying performance for those high power, heavy load, 4-seaters. Engine CC: 1052 Wrench Impeller: N/A Seal: N/A http://www.getaprop.com/content-product_info/product_id-7893/solas_impeller_yamaha_yh_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7893/solas_impeller_yamaha_yh_cd.html DYNAFLY SERIES YG-DF Fits 2004-2007 Yamaha 1052cc PWC (14/20) 2004-07 FX High Output, 2004-07 FX CRUISER High Output Engine CC: 1052 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H Our new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-7892/solas_impeller_yamaha_yg_df.html http://www.getaprop.com/images/products/dynafly[1].gif http://www.getaprop.com/content-product_info/product_id-7892/solas_impeller_yamaha_yg_df.html CONCORD SERIES YF-CD Fits 2003-2007 Yamaha 998cc PWC... (12/18) 2003-07 FX-140 2003-07 FX Cruiser Engine CC: 998 Wrench Impeller: 08-WR007 Seal: 08-SLA009 Holder:WR007H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-7891/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7891/solas_impeller_yamaha_yf_cd.html CONCORD SERIES YF-CD Fits 2000-2005 Yamaha 800cc PWC... (11/14) 2001-05 WAVE RUNNER GP800R 2000-04 WAVE RUNNER XL800 Engine CC: 800 Wrench Impeller: WR007 Seal: SLA009 Holder: WR007H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7894/solas_impeller_yamaha_yf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7894/solas_impeller_yamaha_yf_cd.html CONCORD SERIES YD-CD Fits 1998-1999 Yamaha 800cc PWC (13/17) 1998-99 WAVE RUNNER XL 800 Engine CC: 800 Wrench Impeller: WR007 Seal: SLA009A Holder: WR004H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-7898/solas_impeller_yamaha_yd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7898/solas_impeller_yamaha_yd_cd.html X PROPS SERIES YB-SC-X0 Fits 1998-2000 Yamaha 800cc PWC (15.5/18.5) 1998-2000 WAVE RUNNER GP 800 Engine CC: 800 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. http://www.getaprop.com/content-product_info/product_id-7896/solas_impeller_yamaha_yb_sc_x0.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7896/solas_impeller_yamaha_yb_sc_x0.html X PROPS SERIES YB-SC-X Fits 1998-1999 Yamaha 800cc PWC (15/18) 1998-99 WAVE RUNNER XL 800 Engine CC: 800 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-7899/solas_impeller_yamaha_yb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7899/solas_impeller_yamaha_yb_sc_x.html IJK SERIES YB-SC-J Fits 1998-2000 Yamaha 800cc PWC (14.7/18.5) 1998-2000 WAVE RUNNER GP800 Engine CC: 800 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. Engine CC: 800 Wrench Impeller: 08-WR004 Seal: 08-SL008,SL008A http://www.getaprop.com/content-product_info/product_id-7897/solas_impeller_yamaha_yb_sc_j.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7897/solas_impeller_yamaha_yb_sc_j.html IJK SERIES YB-SC-I Fits 1998-1999 Yamaha 800cc PWC (14.5/18) 1998-99 WAVE RUNNER XL 800 Engine CC: 800 Wrench Impeller: WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H The patented Super Camber S-I-J-K-H aeries makes the hub and rubber seal even more streamlined. Resulting, in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-7900/solas_impeller_yamaha_yb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7900/solas_impeller_yamaha_yb_sc_i.html CONCORD SERIES YB-CD Fits 1998-2000 Yamaha 800cc PWC (14/18) 1998-2000 WAVE RUNNER GP 800 Engine CC: 800 Wrench Impeller: WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engines characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller. http://www.getaprop.com/content-product_info/product_id-7895/solas_impeller_yamaha_yb_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7895/solas_impeller_yamaha_yb_cd.html X PROP SERIES YD-SC-X Fits 1996-1999 Yamaha 760cc PWC (13/16) 1998-99 WAVE RUNNER XL760 1998-99 WAVE VENTURE 760 1996-97 WAVE BLASTER II Engine CC: 760 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. http://www.getaprop.com/content-product_info/product_id-7905/solas_impeller_yamaha_yd_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7905/solas_impeller_yamaha_yd_sc_x.html IJK SERIES YD-SC-S Fits 1996-1999 Yamaha 760cc PWC (12/18.5) 1998-99 WAVE RUNNER XL760 1998-99 WAVE VENTURE 760 1996-97 WAVE BLASTER II Engine CC: 760 Wrench Impeller: WR004 Seal: SLA008 Holder: WR004H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7906/solas_impeller_yamaha_yd_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7906/solas_impeller_yamaha_yd_sc_s.html CONCORD SERIES YD-CD Fits 1996-1999 Yamaha 760cc PWC (11/14) 1996-97 WAVE BLASTER II 1998-99 WAVE RUNNER XL760 1998-99 WAVE VENTURE 760 Engine CC: 760 Wrench Impeller: WR007 Seal: SLA009A Holder: WR004H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7904/solas_impeller_yamaha_yd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7904/solas_impeller_yamaha_yd_cd.html X PROPS SERIES YB-SC-X Fits 1997-2000 Yamaha 760cc PWC (15/18) 1997-2000 WAVE RUNNER GP760 Engine CC: 760 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-7902/solas_impeller_yamaha_yb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7902/solas_impeller_yamaha_yb_sc_x.html IJK SERIES YB-SC-I Fits 1996-2000 Yamaha 760cc PWC (14.5/18) 1997-2000 WAVE RUNNER GP760 1996 WAVE RAIDER 760 Engine CC: 760 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H The patented Super Camber S-I-J-K-H aeries makes the hub and rubber seal even more streamlined. Resulting, in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-7903/solas_impeller_yamaha_yb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7903/solas_impeller_yamaha_yb_sc_i.html CONCORD SERIES YB-CD Fits 1997-2000 Yamaha 760cc PWC (13/17) 1997-2000 WAVE RUNNER GP760 Engine CC: 760 Wrench Impeller: 08-WR004 Seal: SLA008 (18mm Shafts) Seal: SL008A (15mm Shafts) Holder: WR004H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7901/solas_impeller_yamaha_yb_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7901/solas_impeller_yamaha_yb_cd.html CONCORD SERIES YD-CD Fits 1999-2005 Yamaha 701cc PWC... (11/14) 1999-2005 WAVE RUNNER XL700 Engine CC: 701 Wrench Impeller: 08-WR007 Seal: 08-SLA009A Holder: WR004H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7911/solas_impeller_yamaha_yd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7911/solas_impeller_yamaha_yd_cd.html X PROPS SERIES YB-SC-X Fits 1993-1997 Yamaha 701cc PWC (15/18) 1994-97 WAVE RAIDER 700 1994-97 WAVE DELUXE 1994-97 VENTURE 1993-97 WAVE BLASTER 1993-97 WAVE RUNNER GP700 1993-97 PRO VXR Engine CC: 701 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. For use with Yamaha Blaster, GP 760, Raider 701/760, Super Jet, Venture 701, VXR, Wave Runner III. http://www.getaprop.com/content-product_info/product_id-7908/solas_impeller_yamaha_yb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7908/solas_impeller_yamaha_yb_sc_x.html IJK SERIES YB-SC-J Fits 1994-1997 Yamaha 701cc PWC... (14.7/18.5) 1994-97 WAVE RAIDER 700 1994-97 WAVE DELUXE 1994-97 VENTURE Engine CC: 701 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-7909/solas_impeller_yamaha_yb_sc_j.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7909/solas_impeller_yamaha_yb_sc_j.html IJK SERIES YB-SC-I Fits 1993-2006 Yamaha 701cc PWC (14.5/18) 1993-97 WAVE BLASTER 1993-97 WAVE RUNNER GP700 1993-97 PRO VXR 1994-06 SUPER JET Engine CC: 701 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H The patented Super Camber S-I-J-K-H aeries makes the hub and rubber seal even more streamlined. Resulting, in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-7910/solas_impeller_yamaha_yb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7910/solas_impeller_yamaha_yb_sc_i.html CONCORD SERIES YB-CD Fits 1993-2006 Yamaha 701cc PWC (13/17) 1994-97 WAVE RAIDER 700 1994-97 WAVE DELUXE 1994-97 VENTURE 1993-97 WAVE BLASTER 1993-97 WAVE RUNNER GP700 1993-97 PRO VXR 1994-06 SUPER JET Engine CC: 701 Wrench Impeller: 08-WR004 Seal: SL008A (15mm Shafts) Seal: SLA008 (18mm Shafts) Holder: WR004H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7907/solas_impeller_yamaha_yb_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7907/solas_impeller_yamaha_yb_cd.html IJK SERIES YB-SC-S Fits 1991-1996 Yamaha 650cc PWC (14/17) 1991-96 WAVE RUNNER III 1991-95 VXR Engine CC: 650 Wrench Impeller: WR004 Seal: SLA008 (18mm Shaft) Seal: SL008A (15mm Shaft) Holder: WR004H Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-8093/solas_impeller_yamaha_yb_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8093/solas_impeller_yamaha_yb_sc_s.html IJK SERIES YB-SC-I Fits 1990-1993 Yamaha 650cc PWC (14.5/18) 1990-93 SUPER JET Engine CC: 650 Wrench Impeller: WR004 Seal: SL008A (15mm Shaft) Seal: SLA008 (18mm Shaft) Holder: WR004H The patented Super Camber S-I-J-K-H aeries makes the hub and rubber seal even more streamlined. Resulting, in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-8092/solas_impeller_yamaha_yb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8092/solas_impeller_yamaha_yb_sc_i.html ABC SERIES YA-SC-A Fits All Years Yamaha 500 & 650cc PWC (13/18) WAVE RUNNER 500 WAVE JAMMER 500 WAVE JAMMER 650 WAVE JAMMER 650 LX Engine CC: 500/650 Wrench Impeller: WR003 Seal: SL003 Holder: WR003H The Super Camber A-B-C-D-E series remains one of the most popular products in the personal watercraft market. The Super Camber blade has increased the flow and the thrust of the impeller which gives you excellent value at a very attractive price, particularly for early model PWCs. http://www.getaprop.com/content-product_info/product_id-8091/solas_impeller_yamaha_ya_sc_a.html http://www.getaprop.com/images/products/abc.JPG http://www.getaprop.com/content-product_info/product_id-8091/solas_impeller_yamaha_ya_sc_a.html Concord Series TC-CD Fits 1999 Tigershark 1100cc PWC... (14/20) 1999 TS 1100R Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7862/solas_impeller_tigershark_tc_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7862/solas_impeller_tigershark_tc_cd.html X-Prop Series TB-SC-X Fits 1998-1999 Tigershark 1100cc PWC... (15/18) 1998-99 TS1000L 1998-99 TS1000R Engine CC: 1100 Impeller Wrench: 08-WR006 Seal: 08-SL009 X-prop series impellers feature all-new hub and camber blades for reliability, performance and the most powerful drive in the water Engine CC: 1100 Impeller Wrench: 08-WR006 Seal: 08-SL009 http://www.getaprop.com/content-product_info/product_id-7869/solas_impeller_tigershark_tb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7869/solas_impeller_tigershark_tb_sc_x.html IJK SERIES TB-SC-I Fits 1998-1999 Tigershark 1100cc PWC.(15.5/19.5) 1998-99 TS1000L 1998 TS1000R Engine CC: 1100 Impeller Wrench: 08-WR006 Seal: 08-SL009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-7867/solas_impeller_tigershark_tb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7867/solas_impeller_tigershark_tb_sc_i.html X-Prop Series TB-SC-X Fits 1997-1998 Tigershark 999cc PWC... (15/18) 1998 DAYTONA 1000R 1997 DAYTONA 1000 1997 MONTE CARLO1000 Engine CC: 999 Impeller Wrench: 08-WR006 Seal: 08-SL009 X-prop series impellers feature all-new hub and camber blades for reliability, performance and the most powerful drive in the water http://www.getaprop.com/content-product_info/product_id-7868/solas_impeller_tigershark_tb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7868/solas_impeller_tigershark_tb_sc_x.html IJK SERIES TB-SC-I Fits 1997-1998 Tigershark 999cc PWC... (15.5/19.5) 1998 DAYTONA 1000R 1997 DAYTONA 1000 1997 MONTE CARLO 1000 Engine CC: 999, Impeller Wrench: 08-WR006 Seal: 08-SL009 The patented Super Camber S-I-J-K-H aeries makes the hub and rubber seal even more streamlined. Resulting, in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-7866/solas_impeller_tigershark_tb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7866/solas_impeller_tigershark_tb_sc_i.html X-Prop Series TB-SC-X Fits 1996 Tigershark 896cc PWC... (15/18 1996 MONTE CARLO 900 Engine CC: 896 Impeller Wrench: 08-WR006 Seal: 08-SL009 The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. You can trust the harsh field-testing of the X prop by Team SOLAS. http://www.getaprop.com/content-product_info/product_id-2816/solas_impeller_tigershark_tb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2816/solas_impeller_tigershark_tb_sc_x.html IJK SERIES TB-SC-I Fits 1996 Tigershark 896cc PWC... (15.5/19.5) 1996 MONTE CARLO 900 Engine CC: 896 Impeller Wrench: 08-WR006 Seal: 08-SL009 The patented Super Camber S-I-J-K-H Series makes the hub and rubber seal even more streamlined. Resulting, in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-7865/solas_impeller_tigershark_tb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7865/solas_impeller_tigershark_tb_sc_i.html X-Prop Series TB-SC-X Fits 1996-1999 Tigershark 768cc PWC... (15/18) 1998-99 TS770R 1998-99 TS770 1996-97 MONTE CARLO 770 1998 DAYTONA 770R 1998 DAYTONA 770 Engine CC: 768 Impeller Wrench: 08-WR006 Seal: 08-SL009 The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. You can trust the harsh field-testing of the X prop by Team SOLAS. http://www.getaprop.com/content-product_info/product_id-7864/solas_impeller_tigershark_tb_sc_x.html http://www.getaprop.com/images/products/x_prop[1].jpg http://www.getaprop.com/content-product_info/product_id-7864/solas_impeller_tigershark_tb_sc_x.html IJK SERIES TB-SC-I Fits 1996-1999 Tigershark 768cc PWC... (15.5/19.5) 1998-99 TS770R 1998-99 TS770 1998 DAYTONA 770R 1998 DAYTONA 770 1996-97 MONTE CARLO 770 Engine CC: 768 Impeller Wrench: 08-WR006 Seal: 08-SL009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-7863/solas_impeller_tigershark_tb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7863/solas_impeller_tigershark_tb_sc_i.html IJK SERIES TB-SC-I Fits 1996-1999 Tigershark 639cc PWC... (15.5/19.5) 1998-99 TS640 1998-99 TS640L 1996~ MONTEGO 1996-97 MONTEGO DELUXE 1996-97 MONTE CARLO 640 Engine CC: 639 Impeller Wrench: 08-WR006 Seal: 08-SL009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-2817/solas_impeller_tigershark_tb_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-2817/solas_impeller_tigershark_tb_sc_i.html IJK SERIES TA-SC-I Fits 1994-1997 Tigershark 639cc PWC...(14.5/18) 1994-1995 DAYTONA 640 1994-1996 MONTEGO 1995-1997 MONTEGO DLX 1994-1995 MONTE CARLO 640 1994-1995 BARRACUDA Engine CC: 639 Impeller Wrench: N/A Seal: Origional Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. Impeller tool included. http://www.getaprop.com/content-product_info/product_id-2818/solas_impeller_tigershark_ta_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-2818/solas_impeller_tigershark_ta_sc_i.html Concord Series SRX-CD Fits 2004-2007 SeaDoo 1494CC Sportster Jet Boat ...(14/19) 2004-2005 SPORTSTER 4 TEC 2007 UTOPIA, UTOPIA SE 2007 CHALLENGER 180 2007 CHALLENGER SE 2007 CHALLENGER 230 2007 CHALLENGER SE 2007 WAKE 230 2007 SPEEDSTER 150 2007 SPEEDSTER 200 2006-2007 SPEEDSTER WAKE Engine CC: 4 TEC/1494CC Wrench Impeller: WR012 Seal: SLA012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7874/solas_impeller_seadoo_boat_srx_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7874/solas_impeller_seadoo_boat_srx_cd.html Concord Series SR-CD Fits 2003-2007 SeaDoo Speedster 1494CC Jet Boat ...(11/19) 2003-2006 SPEEDSTER 15/200 4-TEC 2007 CHALLENGER 230 2007 CHALLENGER SE 2007 WAKE 230 2007 ISLANDIA SE 2004-2007 SPEEDSTER 200 Engine CC: 4 TEC/1494CC Wrench Impeller: WR011 Seal: SLA011 (24mm Shafts) Seal: SLA011A (27mm Shafts) Holder: WR011H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7873/solas_impeller_seadoo_boat_sr_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7873/solas_impeller_seadoo_boat_sr_cd.html Concord Series MC-CD Fits 2000-2005 SeaDoo Mercury Sport Jet, Speedster, Challenger, Sportster. Islandia and Utopia Jet Boats... (22/39) 2000-2005 CHALLENGER 1800 2000-2005 CHALLENGER 2000 2004-2005 CHALLENGER X 2002-2005 UTOPIA 205 2001-2005 UTOPIA 185 2000-2002 SPEEDSTER 2000 SPEEDSTER SK 2004 SPEEDSTER 160 2000 SPORTSTER 1800 2001-2005 ISLANDIA With features like a large blade area and a unique geometric blade design, the SOLAS Concord impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration, but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller http://www.getaprop.com/content-product_info/product_id-7875/solas_impeller_seadoo_boat_mc_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7875/solas_impeller_seadoo_boat_mc_cd.html Concord Series MC-CD Fits SeaDoo Jet Boat 2000-2005 (22/39) 2000 Sportster 1800 M2 Jet 2004-05 Challenger X M2 Jet 2002-05 Utopia 205 M2 Jet 2001-05 Utopia 185 M2 Jet 2001-05 Islandia M2 Jet With features like a large blade area and a unique geometric blade design, the SOLAS Concord impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration, but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller http://www.getaprop.com/content-product_info/product_id-7876/solas_impeller_seadoo_boat_mc_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7876/solas_impeller_seadoo_boat_mc_cd.html Concord Series ST-CD Fits 2000-2005 SeaDoo Sportster 951cc Jet Boats... (15/20) 2000-2005 SPORTSTER LE DI Engine CC: 951 Wrench Impeller: WR001 Seal: SL007 With features like a large blade area and a unique geometric blade design, the SOLAS Concord impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration, but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller http://www.getaprop.com/content-product_info/product_id-7877/solas_impeller_seadoo_boat_st_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7877/solas_impeller_seadoo_boat_st_cd.html X PROP SD-SC-XO Fits 1995-1999 SeaDoo 780cc Jet Boats... (16.5/23.5) 1997-99 Challenger 1800 1995-97 Challenger Engine CC: 780 Wrench Impeller: WR001 Seal: SL007 The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller http://www.getaprop.com/content-product_info/product_id-7879/solas_impeller_seadoo_boat_sd_sc_xo.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7879/solas_impeller_seadoo_boat_sd_sc_xo.html Concord Series SD-CD Fits 1997-1999 SeaDoo 780cc Jet Boats... (15/23) 1998-99 SPEEDSTER 1997-1999 CHALLENGER 1800 Engine CC: 780 Wrench Impeller: WR001 Seal: SL007 With features like a large blade area and a unique geometric blade design, the SOLAS Concord impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration, but excellent top end performance. From water skiing to high speed cruising, this technologically advanced Power Torque design with its radial leading edge will offer everything you could ask for in an impeller http://www.getaprop.com/content-product_info/product_id-7878/solas_impeller_seadoo_boat_sd_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7878/solas_impeller_seadoo_boat_sd_cd.html X PROP Series SD-SC-X Fits 1995-2002 SeaDoo 720cc Jet Boats... (16/23) 1999 SPEEDSTER SK 1999 SPEEDSTER 1800 1996-1997 SPEEDSTER 2002 SPORTSTER LT 1995-1998 SPORTSTER 1998-2001 CHALLENGER 1997 EXPLORER Engine CC: 720 Wrench Impeller: WR001 Seal: SL007 The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller http://www.getaprop.com/content-product_info/product_id-7880/solas_impeller_seadoo_boat_sd_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7880/solas_impeller_seadoo_boat_sd_sc_x.html ABC Series SD-SC-B Fits 1994-1995 SeaDoo 650cc Jet Boats... (14/19) 1994-95 SPEEDSTER Engine CC: 650 Wrench Impeller: WR001 Seal: SL007 The Super Camber A-B-C-D-E series remains one of the most popular products in the personal watercraft market. The Super Camber blade has increased the flow and the thrust of the impeller which gives you excellent value at a very attractive price, particularly for early model PWCs. http://www.getaprop.com/content-product_info/product_id-7882/solas_impeller_seadoo_boat_sd_sc_b.html http://www.getaprop.com/images/products/ABC.jpg http://www.getaprop.com/content-product_info/product_id-7882/solas_impeller_seadoo_boat_sd_sc_b.html ABC Series SD-SC-A Fits 1994-2006 SeaDoo 650cc Jet Boats... (13/18) 1994-95 SPEEDSTER 1995 SPORTSTER 1993-96 EXPOLOER Engine CC: 650 Wrench Impeller: WR001 Seal: SL007 The Super Camber A-B-C-D-E series remains one of the most popular products in the personal watercraft market. The Super Camber blade has increased the flow and the thrust of the impeller which gives you excellent value at a very attractive price, particularly for early model PWCs. http://www.getaprop.com/content-product_info/product_id-7881/solas_impeller_seadoo_boat_sd_sc_a.html http://www.getaprop.com/images/products/ABC.jpg http://www.getaprop.com/content-product_info/product_id-7881/solas_impeller_seadoo_boat_sd_sc_a.html CONCORD SERIES SRX-CD Fits 2004-2006 SeaDoo 1494cc PWC...(14/19) 2004-2006 RXP Engine CC: 1494 Wrench Impeller #08-WR012 Seal #08-SLA012. Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2731/solas_impeller_seadoo_srx_cd_14_19.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2731/solas_impeller_seadoo_srx_cd_14_19.html CONCORD SERIES SRX-CD Fits 2004-2007 SeaDoo 1494cc PWC...(13/18) 2004-2007 RXT 2005-2007 GTX LIMITED 2007~ WAKE SUPERCHARGED Engine CC: 1494 Wrench Impeller #08-WR012 Seal #08-SLA012. Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2730/solas_impeller_seadoo_srx_cd_13_18.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2730/solas_impeller_seadoo_srx_cd_13_18.html CONCORD SERIES SR-CD Fits 2003-2006 SeaDoo 1494cc PWC...(12/20) 2003-2004 GTX-4 TECH SUPERCHARGED 2003-2006 GTX-4 TECH LIMITED SUPERCHARGED Engine CC: 1494 Wrench Impeller #08-WR011 Seal #08-SLA011 (24mm Shafts) Seal #08-SLA011A (27mm Shafts) Drive Shaft Holder: 08-WRO11H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2729/solas_impeller_seadoo_sr_cd_12_20.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2729/solas_impeller_seadoo_sr_cd_12_20.html CONCORD SERIES SR-CD Fits 2002-2007 SeaDoo 1494cc PWC...(11/19) 2007~ GTS SE 155 2002-2007 GTX 2002-2007 GTX 4-TECH 2002-2007 GTX WAKE Engine CC: 1494 Wrench Impeller WR011 Seal: SLA011 (24mm Shafts) Seal: SLA011A (27mm Shafts) Drive Shaft Holder: 08-WRO11H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. For use with Sea Doo GTX 4-Tech, GTX Wake '02-'05. http://www.getaprop.com/content-product_info/product_id-2728/solas_impeller_seadoo_sr_cd_11_19.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2728/solas_impeller_seadoo_sr_cd_11_19.html CONCORD SERIES SR-CD Fits 2006-2007 SeaDoo 1494cc PWC...(10/18) 2006-2007 GTI 2006-2007 GTI SE 130 Engine CC: 1494 Wrench Impeller #08-WR011 Seal SLA011 (24mm Shafts) Seal SLA011A (27mm Shafts) Drive Shaft Holder: 08-WRO11H Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. For use with Sea Doo GTX 4-Tech, GTX Wake '02-'05. http://www.getaprop.com/content-product_info/product_id-8023/solas_impeller_seadoo_sr_cd_10_18.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8023/solas_impeller_seadoo_sr_cd_10_18.html X-PROP SERIES ST-SC-XO Fits 1998-2003 SeaDoo 951cc PWC...(14.5/17.5) 1998-1999 GSX LIMITED 1998-1999 XP LIMITED 1999-2003 LRV 1999-2003 LRV DI Engine CC: 951 Wrench Impeller #08-WR001 Seal #08-SL007 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. http://www.getaprop.com/content-product_info/product_id-2766/solas_impeller_seadoo_st_sc_xo_14_5_17_5.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2766/solas_impeller_seadoo_st_sc_xo_14_5_17_5.html DYNA FLY SERIES ST-DF Fits 2000-2004 SeaDoo 951cc PWC...(13/19) 2000-2004 XP/XP DI 2000-2003 RX/RX DI 2000-2003 GTX/GTX DI Engine CC: 951 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-2720/solas_impeller_seadoo_st_df_13_19.html http://www.getaprop.com/images/products/dynafly[1].gif http://www.getaprop.com/content-product_info/product_id-2720/solas_impeller_seadoo_st_df_13_19.html CONCORD SERIES ST-CD Fits 1998-2004 SeaDoo 951cc PWC...(15/20) 2000-2004 XP/XP DI, 2000-2003 RX/RX DI, 2000-2003 GSX/GSX DI, 1998-1999 GSX Ltd GTX Ltd XP Ltd. Engine CC: 951 Wrench Impeller #08-WR001 Seal #08-SL007 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. http://www.getaprop.com/content-product_info/product_id-2726/solas_impeller_seadoo_st_cd_15_20.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2726/solas_impeller_seadoo_st_cd_15_20.html CONCORD SERIES ST-CD Fits 1999-2003 SeaDoo 951cc PWC...(14/19) 1999-2003 LRV 1999-2003 LRV DI Engine CC: 951 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-2725/solas_impeller_seadoo_st_cd_14_19.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2725/solas_impeller_seadoo_st_cd_14_19.html CONCORD SERIES KG-CD Fits 2001-2002 SeaDoo 951cc PWC...(15/21) 2001-2002 RXX Engine CC: 951 Wrench Impeller #08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-2723/solas_impeller_seadoo_kg_cd_15_21.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2723/solas_impeller_seadoo_kg_cd_15_21.html CONCORD SERIES ST-CD Fits 2005-2007 SeaDoo 782cc PWC... (10/16) 2005-2007 3D 2005-2007 3D Base Engine CC: 782 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-2724/solas_impeller_seadoo_st_cd_10_16.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2724/solas_impeller_seadoo_st_cd_10_16.html X-PROP SERIES SD-SC-XO Fits 1996-1998 SeaDoo 782cc PWC...(16.5/23.5) 1996-1998 GTX 1996-1998 GTX PRO 1996-1998 XP 1996-1998 SPX GSX Engine CC: 782 Wrench Impeller #08-WR001 Seal #08-SL007 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. http://www.getaprop.com/content-product_info/product_id-2758/solas_impeller_seadoo_sd_sc_xo_16_5_23_5.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2758/solas_impeller_seadoo_sd_sc_xo_16_5_23_5.html CONCORD SERIES SD-CD Fits 1996-1998 SeaDoo 782cc PWC... (15/23) 1996-1998 XP, SPX GSX Engine CC: 782 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-2722/solas_impeller_seadoo_sd_cd_15_23.html http://www.getaprop.com/images/products/concord[1][1].JPG http://www.getaprop.com/content-product_info/product_id-2722/solas_impeller_seadoo_sd_cd_15_23.html CONCORD SERIES SD-CD Fits 1996-1998 SeaDoo 782cc PWC... (14/22) 1996-1998 GTX 1996-1998 GTX PRO Engine CC: 782 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-8041/solas_impeller_seadoo_sd_cd_14_22.html http://www.getaprop.com/images/products/concord[1][1].JPG http://www.getaprop.com/content-product_info/product_id-8041/solas_impeller_seadoo_sd_cd_14_22.html CONCORD SERIES ST-CD Fits 2005-2007 SeaDoo 720cc PWC... (10/16) 2001-2005 GTI 2001-2005 GTI LE 2001-2005 GTI RFI 2001-2002 GTS Engine CC: 720 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-8024/solas_impeller_seadoo_st_cd_10_16.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8024/solas_impeller_seadoo_st_cd_10_16.html X-PROP SERIES SD-SC-X Fits 1995-2001 SeaDoo 720cc PWC...(16/23) 1995-1997 XP 1995-1997 SPX 1997-2001 GS 1997-2001 GSI 1996-2000 GTI 1996-2000 GTS 1995~ HX Engine CC: 720 Wrench Impeller #08-WR001 Seal #08-SL007 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. http://www.getaprop.com/content-product_info/product_id-2752/solas_impeller_seadoo_sd_sc_x_16_23.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2752/solas_impeller_seadoo_sd_sc_x_16_23.html IJK SERIES SD-SC-I Fits 1995-2001 SeaDoo 720cc PWC... (14/19) 1995-1997 XP/SPX 1997-2001 GS/GSI 1996-2000 GTI/GTS 1995~ HS Engine CC: 720 Wrench Impeller #08-WR001 Seal #08-SL007 The patented Super Camber S-I-J-K-H Series makes the hub and rubber seal even more streamlined, resulting in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-2737/solas_impeller_seadoo_sd_sc_i_14_19.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-2737/solas_impeller_seadoo_sd_sc_i_14_19.html CONCORD SERIES SD-CD Fits 1995-2000 SeaDoo 720cc PWC... (14/22) 1995-1997 XP/SPX 1997-2001 GS/GSI 1996-2000 GTI/GTS Engine CC: 720 Wrench Impeller #08-WR001 Seal #08-SL007 Solas new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. http://www.getaprop.com/content-product_info/product_id-2721/solas_impeller_seadoo_sd_cd_14_22.html http://www.getaprop.com/images/products/concord[1][1].gif http://www.getaprop.com/content-product_info/product_id-2721/solas_impeller_seadoo_sd_cd_14_22.html IJK SERIES SD-SC-I Fits 1993-1995 SeaDoo 650cc PWC... (14/19) 1993-1994 XP 1994-1995 SPX 1994-1995 GSX 1994-1995 GTX Engine CC: 650 Wrench Impeller: WR001 Seal: SL007 The patented Super Camber S-I-J-K-H Series makes the hub and rubber seal even more streamlined, resulting in reduced drag for the impeller while increasing volumetric flow of the pump at the same time, making the SOLAS Super Camber series arguably the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-8055/solas_impeller_seadoo_sd_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8055/solas_impeller_seadoo_sd_sc_i.html ABC SERIES SD-SC-A Fits 1988-1996 Kawasaki 580cc PWC... (13/18) 1991-1992 XP 1993 SPX 1993-1996 SPI 1988-1996 SP 1992-1993 GSX 1992-1993 GTX 1992-1996 GTS 1990-1991 GT Engine CC: 580 Impeller Wrench: WR001 Seal: SL007 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-8046/solas_impeller_seadoo_sd_sc_a.html http://www.getaprop.com/images/products/super_camber_abc[1].gif http://www.getaprop.com/content-product_info/product_id-8046/solas_impeller_seadoo_sd_sc_a.html CONCORD SERIES PA-CD Fits 2003-2004 Polaris 1192cc PWC... (15/21) 2003-04 MSX 110 Engine CC: 1192 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7916/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7916/solas_impeller_polaris_pa_cd.html X PROP SERIES PA-SC-XO Fits 1999-2004 Polaris 1165cc PWC (16.5/23) 2000-02 PRO 1200 2000-02 VIRAGE TX 2000-02 VIRAGE TXI 1999-04 GENESIS 1999-04 GENESIS I 2000 GENESIS FFI Engine CC: 1165 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7918/solas_impeller_polaris_pa_sc_xo.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7918/solas_impeller_polaris_pa_sc_xo.html IJK SERIES PA-SC-I Fits 1999-2004 Polaris 1165cc PWC... (15/24) 2000-02 PRO1200 2000-02 VIRAGE TX 2000-02 VIRAGE TXI 1999-04 GENESIS 1999-04 GENESIS I 2000 GENESIS FFI Engine CC: 1165 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7919/solas_impeller_polaris_pa_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7919/solas_impeller_polaris_pa_sc_i.html CONCORD SERIES PA-CD Fits 2000-2002 Polaris 1165cc PWC... (15/21) 2000-02 PRO 1200 2000-02 VIRAGE TX 2000-02 VIRAGE TXI Engine CC: 1165 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7917/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7917/solas_impeller_polaris_pa_cd.html X PROP SERIES PA-SC-X Fits 1997-1998 Polaris 1050cc PWC... (14/21) 1997-98 SL, SLK, SLXH, SLTX 1050 Engine CC: 1050 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7922/solas_impeller_polaris_pa_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7922/solas_impeller_polaris_pa_sc_x.html IJK SERIES PA-SC-S Fits 1997-1998 Polaris 1050cc PWC...(14/23) 1997-98 SL, SLK, SLXH, SLTX, 1050 Engine CC: 1050 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. For use with Polaris 900, 1050 '96-'98; 700, 750, 780 '94-'00. http://www.getaprop.com/content-product_info/product_id-7921/solas_impeller_polaris_pa_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7921/solas_impeller_polaris_pa_sc_s.html CONCORD SERIES PA-CD Fits 1997-1998 Polaris 1050cc PWC... (14/20) 1997-98 SL, SLK, SLXH, SLTX, 1050 Engine CC: 1050 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7920/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7920/solas_impeller_polaris_pa_cd.html X PROP SERIES PA-SC-X Fits 1996-1997 Polaris 900cc PWC...(14/21) 1996-97 SL900 Engine CC: 900 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7924/solas_impeller_polaris_pa_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7924/solas_impeller_polaris_pa_sc_x.html IJK SERIES PA-SC-S Fits 1996-1997 Polaris 900cc PWC... (14/23) 1996-97 SL900 Engine CC: 900 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. For use with Polaris 900, 1050 '96-'98; 700, 750, 780 '94-'00. http://www.getaprop.com/content-product_info/product_id-7925/solas_impeller_polaris_pa_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7925/solas_impeller_polaris_pa_sc_s.html CONCORD SERIES PA-CD Fits 1996-1997 Polaris 900cc PWC... (13/19) 1996-97 SL900 Engine CC: 900 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7923/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7923/solas_impeller_polaris_pa_cd.html X PROP SERIES PA-SC-X Fits 1996-2001 Polaris 779cc PWC...(14/21) 1996-01 SLX PRO 785 1996-01 SL 780 1996-01 SLT 780 Engine CC: 779 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7927/solas_impeller_polaris_pa_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-7927/solas_impeller_polaris_pa_sc_x.html CONCORD SERIES PA-CD Fits 1996-2001 Polaris 779cc PWC (12/18) 1996-01 SLX PRO 785 1996-01 SL 780 1996-01 SLT 780 Engine CC: 779 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7926/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7926/solas_impeller_polaris_pa_cd.html IJK SERIES PA-SC-S Fits 1996-2001 Polaris 779cc PWC...(14/23) 1996-01 SLX PRO 785 1996-01 SL 780 1996-01 SLT 780 Engine CC: 779 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7928/solas_impeller_polaris_pa_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7928/solas_impeller_polaris_pa_sc_s.html CONCORD SERIES PF-CD Fits 2002-2004 Polaris 777cc PWC...(15/23) 2002-04 OCTANE Engine CC: 777 Impeller Wrench: 08-WR006 Seal: 08-SL009 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. For use with Polaris Octane '02-'04. http://www.getaprop.com/content-product_info/product_id-7930/solas_impeller_polaris_pf_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7930/solas_impeller_polaris_pf_cd.html CONCORD SERIES PA-CD Fits 2002-2004 Polaris 777cc PWC (12/18) 2002-04 VIRAGE I Engine CC: 777 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7929/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7929/solas_impeller_polaris_pa_cd.html CONCORD SERIES PA-CD Fits 2003-2004 Polaris 750cc PWC (13/19) 2003-04 MSX 150 Engine CC: 750 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7931/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7931/solas_impeller_polaris_pa_cd.html CONCORD SERIES PA-CD Fits 2003-2004 Polaris 750cc PWC... (11/17) 2004-04 MSX 110 Engine CC: 750 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. Engine CC: 750 Impeller Wrench: 08-WR006 Seal: 08-SL006 http://www.getaprop.com/content-product_info/product_id-7932/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7932/solas_impeller_polaris_pa_cd.html CONCORD SERIES PA-CD Fits 1994-1995 Polaris 744cc PWC...(12/18) 1994-95 SL 750 1994-95 SLT 750 Engine CC: 744 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7933/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7933/solas_impeller_polaris_pa_cd.html IJK SERIES PA-SC-S Fits 1994-1995 Polaris 744cc PWC... (14/23) 1994-95 SL 750 1994-95 SLT 750 Engine CC: 744 Impeller Wrench: 08-WR006 Seal: 08-SL006 Seal: 08-SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. For use with Polaris 900, 1050 '96-'98; 700, 750, 780 '94-'00. http://www.getaprop.com/content-product_info/product_id-7934/solas_impeller_polaris_pa_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7934/solas_impeller_polaris_pa_sc_s.html IJK SERIES PA-SC-S Fits 1996-2004 Polaris 700cc PWC...(14/23) 1996-97 SL700 DLX 1996-97 SL700 1996-97 HURRICANE 1998-01 SLH 2002-04 VIRAGE 2002-04 FREEDOM Engine CC: 700 Impeller Wrench: 08-WR006 Seal: SL006 Seal: SL012 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-7936/solas_impeller_polaris_pa_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-7936/solas_impeller_polaris_pa_sc_s.html CONCORD SERIES PA-CD Fits 1996-2004 Polaris 700cc PWC... (12/18) 2002-04 VIRAGE 2002-04 FREEDOM 1998-01 SLH 1996-97 SL700 DLX 1996-97 SL700 1996-97 HURRICANE Engine CC: 700 Impeller Wrench: WR006 Seal: SL006 Seal: SL012 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7935/solas_impeller_polaris_pa_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7935/solas_impeller_polaris_pa_cd.html CONCORD SERIES KX-CD Fits 2007 Kawasaki 1498cc PWC...(16/21) 2007 ULTRA 250X Engine CC: 1498 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-8026/solas_impeller_kawasaki_kx_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8026/solas_impeller_kawasaki_kx_cd.html CONCORD SERIES KG-CD Fits 2004-2007 Kawasaki 1498cc PWC...(14/21) 2004-2007 STX-15F Engine CC: 1498 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2790/solas_impeller_kawasaki_kg_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2790/solas_impeller_kawasaki_kg_cd.html CONCORD SERIES KG-CD Fits 2003-2007 Kawasaki 1199cc PWC... (12/18) 2003-2007 STX-12F Engine CC: 1199 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2792/solas_impeller_kawasaki_kg_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2792/solas_impeller_kawasaki_kg_cd.html DYNAFLY SERIES KH-DF Fits 1999-2006 Kawasaki 1176cc PWC... (16/20) 1999-2006 ULTRA 150 Engine CC: 1176 Impeller Wrench: 08-WR001 Seal:08-SL007 Our new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump. SOLAS also has developed new impellers for other Kawasaki pumps. http://www.getaprop.com/content-product_info/product_id-2793/solas_impeller_kawasaki_kh_df.html http://www.getaprop.com/images/products/dynafly[1].gif http://www.getaprop.com/content-product_info/product_id-2793/solas_impeller_kawasaki_kh_df.html DYNAFLY SERIES KG-DF Fits 2002-2006 Kawasaki 1176cc PWC... (13/25) 2002-2006 STX-R 1200 Engine CC: 1176 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Our new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump. SOLAS also has developed new impellers for other Kawasaki pumps. http://www.getaprop.com/content-product_info/product_id-2797/solas_impeller_kawasaki_kg_df.html http://www.getaprop.com/images/products/dynafly[1].gif http://www.getaprop.com/content-product_info/product_id-2797/solas_impeller_kawasaki_kg_df.html CONCORD SERIES KG-CD Fits 2002-2006 Kawasaki 1176cc PWC... (15/21) 2002-2006 STX-R 1200 Engine CC: 1176 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2794/solas_impeller_kawasaki_kg_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2794/solas_impeller_kawasaki_kg_cd.html X PROP SERIES KG-SC-X Fits 1996-2003 Kawasaki 1071cc PWC... (16.5/24) 2001-2003 STX-DI 1100 1997-1998 STX 1100 1996-2003 ZXI 1100 Engine CC: 1071 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. You can trust the harsh field-testing of the X prop by Team SOLAS. http://www.getaprop.com/content-product_info/product_id-2799/solas_impeller_kawasaki_kg_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2799/solas_impeller_kawasaki_kg_sc_x.html CONCORD SERIES KG-CD Fits 1996-2003 Kawasaki 1071cc PWC... (13/19) 2001-2003 1100STX DI 1997-1998 1100STX 1996-2003 1100ZXI Engine CC: 1071 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2795/solas_impeller_kawasaki_kg_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2795/solas_impeller_kawasaki_kg_cd.html CONCORD SERIES KG-CD Fits 2003-2006 Kawasaki 891cc PWC... (12/18) 2003-2006 900 STX Engine CC: 891 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-8012/solas_impeller_kawasaki_kg_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-8012/solas_impeller_kawasaki_kg_cd.html X PROP SERIES KF-SC-X Fits 1996-2002 Kawasaki 891cc PWC... (16/23) 1996-2002 STX 900 1996-2002 STS 900 1996-2002 ZXI 900 Engine CC: 891 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. You can trust the harsh field-testing of the X prop by Team SOLAS. http://www.getaprop.com/content-product_info/product_id-2800/solas_impeller_kawasaki_kf_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2800/solas_impeller_kawasaki_kf_sc_x.html IJK SERIES KF-SC-I Fits 1996-2002 Kawasaki 891cc PWC... (16/21) 1996-2002 STX 900 1996-2002 STS 900 1996-2002 ZXI 900 Engine CC: 891 Impeller Wrench: 08-WR001 Seal: SL009 Seal: SLA009 (Optional Upgrade) SUPER CAMBER S-I-J-K-H (IJK SERIES) BENCHMARK OF THE IMPELLER EVOLUTION. The patented Super Camber S-I-J-K-H Series makes the hub and rubber seal more streamlined. The form drag of the impeller will be reduced and flow volume of a jet pump will be increased at the same time. Solas Super Camber Series S-I-J-K-H is still one of the best in the PWC market. http://www.getaprop.com/content-product_info/product_id-2802/solas_impeller_kawasaki_kf_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-2802/solas_impeller_kawasaki_kf_sc_i.html DYNAFLY SERIES KP-DF Fits 2003-2007 Kawasaki 782cc PWC... (13/22) 2003-2007 SX-R 800 Engine CC: 782 Impeller Wrench: WR001 Seal: SL009 Our new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation. This impeller is capable of giving your PWC an incredible boost in its acceleration. The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump. SOLAS also has developed new impellers for other Kawasaki pumps. http://www.getaprop.com/content-product_info/product_id-2798/solas_impeller_kawasaki_kp_df.html http://www.getaprop.com/images/products/dynafly[1].gif http://www.getaprop.com/content-product_info/product_id-2798/solas_impeller_kawasaki_kp_df.html IJK SERIES KE-SC-I Fits 1992-1996 Kawasaki 743cc PWC... (14/19) 1992-1996 750SX 1993-1995 750ST 1994 750XIR Engine CC: 743 Impeller Wrench: 08-WR001 Seal: SL009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-2804/solas_pwc_impeller_ke_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-2804/solas_pwc_impeller_ke_sc_i.html X PROP SERIES KE-SC-X Fits 1993-2002 Kawasaki 743cc PWC... (14/21) 1995-2002 750SXI PRO 1995-2001 750STS 1993-2000 750XI SPORT 1995-1997 750ZXI 1993-1997 750XI Engine CC: 743 Impeller Wrench: 08-WR001 Seal: SL009 The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration, from the novice to the professional, will be satisfied by using this impeller. You can trust the harsh field-testing of the X prop by Team SOLAS. http://www.getaprop.com/content-product_info/product_id-2801/solas_impeller_kawasaki_ke_sc_x.html http://www.getaprop.com/images/products/x_prop[1].gif http://www.getaprop.com/content-product_info/product_id-2801/solas_impeller_kawasaki_ke_sc_x.html IJK SERIES KE-SC-S Fits 1993-2002 Kawasaki 743cc PWC... (13/18) 1995-2002 750SXI PRO 1995-2001 750STS 1993-2000 750XI SPORT 1995-1997 750ZXI 1993-1997 750XI Engine CC: 743 Impeller Wrench: 08-WR001 Seal: SL009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-2803/solas_impeller_kawasaki_ke_sc_s.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-2803/solas_impeller_kawasaki_ke_sc_s.html ABC SERIES KE-SC-A Fits 1992-1997 Kawasaki 743cc PWC... (13/18) 1992-1997 750SS 1995-1996 750SXI 1992-1996 750SX 1993-1995 750ST 1994 750XIR Engine CC: 743 Impeller Wrench: 08-WR001 Seal: SL009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-2805/solas_impeller_kawasaki_ke_sc_a.html http://www.getaprop.com/images/products/super_camber_abc[1].gif http://www.getaprop.com/content-product_info/product_id-2805/solas_impeller_kawasaki_ke_sc_a.html CONCORD SERIES KE-CD Fits 1992-2002 Kawasaki 743cc PWC...(09/15) 1995-2002 SXI-PRO 750 1992-1997 SS 750 Engine CC: 743 Impeller Wrench: 08-WR001 Seal:08-SL009 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2796/solas_impeller_kawasaki_ke_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2796/solas_impeller_kawasaki_ke_cd.html CONCORD SERIES KE-CD Fits Kawasaki 1992-2001 743cc PWC...(11/16) 1995-2001 750STS 1993-2000 750SI SPORT 1993-1997 750XI 1995-1996 750SXI 1992-1996 750SX 1993-1995 750ST 1997 750ZXI 1994 750XIR Engine CC: 743 Impeller Wrench: 08-WR001 Seal:08-SL009 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-2791/solas_impeller_kawasaki_ke_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-2791/solas_impeller_kawasaki_ke_cd.html IJK SERIES KA-SC-I Fits 1989-1996 Kawasaki 635cc PWC... (13/18) 1989-1996 650 TS 1989-1996 650 SX 1991-1996 650 X-2 1991-1996 650 JM Engine CC: 635 Impeller Wrench: 08-WR001 Seal: SLA009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-8013/solas_impeller_kawasaki_ka_sc_i.html http://www.getaprop.com/images/products/super_camber_ijk[1].gif http://www.getaprop.com/content-product_info/product_id-8013/solas_impeller_kawasaki_ka_sc_i.html ABC SERIES KD-SC-A Fits 1990-1996 Kawasaki 550cc PWC... (13/18) 1990-1996 550 SX Engine CC: 550 Impeller Wrench: 08-WR001 Seal: SLA009 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-8017/solas_impeller_kawasaki_kd_sc_a.html http://www.getaprop.com/images/products/super_camber_abc[1].gif http://www.getaprop.com/content-product_info/product_id-8017/solas_impeller_kawasaki_kd_sc_a.html ABC SERIES KC-SC-A Fits 1977-1994 Kawasaki 440cc PWC... (13/18) 1997-1994 440JS Engine CC: 440 Impeller Wrench:WR005 Seal: Origional Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-8016/solas_impeller_kawasaki_kc_sc_a.html http://www.getaprop.com/images/products/super_camber_abc[1].gif http://www.getaprop.com/content-product_info/product_id-8016/solas_impeller_kawasaki_kc_sc_a.html ABC SERIES KB-SC-A Fits 1982-1989 Kawasaki 550cc PWC... (13/18) 1982-1989 550 JS Engine CC: 550 Impeller Wrench: 08-WR002 Seal: SLA002 Solas Super Camber Blade - The Super Camber Blade impeller has been designed for applications which require more thrust on low end use, such as multiple riders or towing a skier, as well as improving top end and overall performance. Solas keeps its consistency by individually casting each impeller from ultra high strength stainless steel. Features exclusive hub-end water seal and zero cavitation polished hub. High performance impeller with small hub. http://www.getaprop.com/content-product_info/product_id-8015/solas_impeller_kawasaki_kb_sc_a.html http://www.getaprop.com/images/products/super_camber_abc[1].gif http://www.getaprop.com/content-product_info/product_id-8015/solas_impeller_kawasaki_kb_sc_a.html Concord Series HA-CD Fits 2002-2004 Honda 1235cc PWC... (12/18) 2004 R-12 2002-04 F-12 Engine CC: 1235 Wrench Impeller: 08-WR001 Seal: 08-SLA010 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. http://www.getaprop.com/content-product_info/product_id-7870/solas_impeller_honda_ha_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7870/solas_impeller_honda_ha_cd.html Concord Series HA-CD Fits 2002-2007 Honda 1235cc PWC... (17/29) 2004-07 R-12X 2002-07 F-12X 2002-2007 F-12X GPScape Engine CC: 1235 Wrench Impeller: 08-WR001 Seal: 08-SLA010 Speed Begins With A Solas Impeller - Designed for speed, handling, and durability, all Solas impellers are made of an ultra high strength stainless steel with one-piece molding to achieve a consistent pitch. Recognized worldwide, Solas offers you a choice of innovative designs. The new Concord impellers feature a radial blade design. Built to enhance all-around performance, the Concord will maintain top-end speeds, while increasing low-end power for towing or carrying more passengers. Also improves blast-off power and allows better hook-up in choppy water. <BR><BR> <table border=1 width="100%"> <TR><TD><center><img src="http://www.getaprop.com/images/products/KAWASAKI.JPG" width="300" height="350"></center> </TD></TR> <TR><TD> 1. Remove and separate the whole jet pump from the PWC. 2. Remove the trail cone (or cap) from the stator. 3. Hold the rear end of the shaft with a bench vice Remove the Impeller with an Impeller wrench (optional part) Turning counter clockwise will loosen the Impeller 4. Visually inspect thread on shaft & Impeller for debris or damage. Apply grease or anti-seize on the thread before installation. 5. Screw in the Impeller by hand; please be careful of the sharp edges of the Impeller. Tighten with the Impeller wrench. If the Impeller feels too tight or not threaded properly, unscrew the Impeller, clean and check the threads. 6. Assemble the pump and refill O/E pump oil or grease to spec. This installation guide is suggested for reference only. (Please refer to your origional service manual or contact your PWC dealer for detail.) </TR></TD> </table> http://www.getaprop.com/content-product_info/product_id-7871/solas_impeller_honda_ha_cd.html http://www.getaprop.com/images/products/concord[1].gif http://www.getaprop.com/content-product_info/product_id-7871/solas_impeller_honda_ha_cd.html 14 X 18 Solas 4 Blade 1 1/8" SAE Stainless Steel Skiboat Propellers available in both Right and Left hand rotations with 1 1/8" SAE standard taper and keyway.... The Solas Ski Propeller is designed with a revolutionary new blade geometry to handle a wide range of conditions, from family recreation to sporting and competitive events. http://www.getaprop.com/content-product_info/product_id-7741/solas_stainless_propellers_14.html http://www.getaprop.com/images/products/SOLAS4.JPG http://www.getaprop.com/content-product_info/product_id-7741/solas_stainless_propellers_14.html Solas New Saturn-3 Rubex Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7672/solas_new_saturn_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7672/solas_new_saturn_3_rubex_propeller_yamaha.html Solas Lexor-4 Rubex Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Interchangeable Hub System 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 All around performance Four blade design stainless steel propeller Large diameter and blade area for big boat loads Great high performance without sacrificing mid-range speeds Excellent fuel economy for offshore boats The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8685/solas_lexor_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-8685/solas_lexor_4_rubex_propeller_yamaha.html "New" Solas Lexor-3 Rubex Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Interchangeable Hub System 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7671/solas_lexor_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7671/solas_lexor_3_rubex_propeller_yamaha.html Solas Lexor-3 Plus Rubex Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Interchangeable Hub System 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 All around performance Three blade stainless steel propeller Larger diameter and blade area for big boat loads Excellent high speed performance without sacrificing mid-range speeds Excellent fuel economy for offshore boats The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8686/solas_lexor_3_plus_rubex_propeller_volvo_yamaha.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-8686/solas_lexor_3_plus_rubex_propeller_volvo_yamaha.html Solas HR Titan-4 Rubex Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7670/solas_hr_titan_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7670/solas_hr_titan_4_rubex_propeller_yamaha.html Solas Amita-4 Rubex Aluminum Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7668/solas_amita_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7668/solas_amita_4_rubex_propeller_yamaha.html Solas Amita-3 Rubex Aluminum Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7667/solas_amita_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7667/solas_amita_3_rubex_propeller_yamaha.html Solas Amita-3 Plus Aluminum Propeller fits 3.0L To 7.4L Yamaha Sterndrives... (Larger Diameter for heavier Boats) Thru-Hub Exhaust & 15 Tooth Spline Rubber Hub Bushing 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7666/solas_amita_3_plus_propeller_yamaha.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7666/solas_amita_3_plus_propeller_yamaha.html (Long Hub) Solas Titan-3 Stainless Propeller fits SP 280-290 Volvo Penta Sterndrives... Rubber Hub Bushing Included High Speed Long Hub Propeller For SP280-290 Drives... Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7621/solas_titan_3_long_hub_propeller_volvo.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7621/solas_titan_3_long_hub_propeller_volvo.html (Long Hub) Solas New Saturn Stainless Propeller fits SP 280-290 Volvo Penta Sterndrives... Rubber Hub Bushing Included High Speed Long Hub Propeller For SP280-290 Drives... When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7620/solas_new_saturn_long_hub_propeller_volvo.html http://www.getaprop.com/images/products/NEW SATURN.JPG http://www.getaprop.com/content-product_info/product_id-7620/solas_new_saturn_long_hub_propeller_volvo.html (Long Hub) Solas Amita-4 Aluminum Propeller fits SP 280-290 Volvo Penta Sterndrives... Rubber Hub Bushing Included High Speed Long Hub Propeller For SP280-290 Drives... Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7619/solas_amita_4_long_hub_propeller_volvo.html http://www.getaprop.com/images/products/SOL2.JPG http://www.getaprop.com/content-product_info/product_id-7619/solas_amita_4_long_hub_propeller_volvo.html (Long Hub) Solas Amita-3 Plus Aluminum Propeller fits SP 280-290 Volvo Penta Sterndrives...(New Larger Diameter) Rubber Hub Bushing Included High Speed Long Hub Propeller For SP280-290 Drives... Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7618/solas_amita_3_plus_long_hub_propeller_volvo.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7618/solas_amita_3_plus_long_hub_propeller_volvo.html Solas New Saturn-3 Rubex Stainless Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Thru Hub Exhaust Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation New Saturn propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The New Saturn series is very suitable for high speed planing hulls. High speed blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7625/solas_new_saturn_3_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7625/solas_new_saturn_3_rubex_propeller_volvo_sx.html Solas Lexor-4 Rubex Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) All around performance Four blade design stainless steel propeller Large diameter and blade area for big boat loads Great high performance without sacrificing mid-range speeds Excellent fuel economy for offshore boats The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8684/solas_lexor_4_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-8684/solas_lexor_4_rubex_propeller_volvo_sx.html Solas Lexor-3 Rubex Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8683/solas_lexor_3_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-8683/solas_lexor_3_rubex_propeller_volvo_sx.html Solas Lexor-3 Plus Rubex Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) All around performance Three blade stainless steel propeller Larger diameter and blade area for big boat loads Excellent high speed performance without sacrificing mid-range speeds Excellent fuel economy for offshore boats The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8682/solas_lexor_3_plus_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-8682/solas_lexor_3_plus_rubex_propeller_volvo_sx.html Solas HR Titan-4 Rubex Stainless Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7626/solas_hr_titan_4_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7626/solas_hr_titan_4_rubex_propeller_volvo_sx.html Solas Amita-4 Rubex Aluminum Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7624/solas_amita_4_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7624/solas_amita_4_rubex_propeller_volvo_sx.html Solas Amita-3 Rubex Aluminum Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7622/solas_amita_3_rubex_propeller_volvo_sx.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7622/solas_amita_3_rubex_propeller_volvo_sx.html Solas Amita-3 Plus Aluminum Propeller Fits Volvo Penta SX Drives... (Larger Diameter,Heavier Boats) Rubber Hub Bushing Thru Hub Exhaust Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7623/solas_amita_3_plus_propeller_volvo_sx.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7623/solas_amita_3_plus_propeller_volvo_sx.html Solas New Saturn Stainless Rubex Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7635/solas_new_saturn_rubex_propeller_omc800.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7635/solas_new_saturn_rubex_propeller_omc800.html Solas Lexor-4 Rubex Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Interchangeable Hub System Thru Hub Exhaust Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older All around performance Four blade design stainless steel propeller Large diameter and blade area for big boat loads Great high performance without sacrificing mid-range speeds Excellent fuel economy for offshore boats The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7558/solas_lexor_4_rubex_propeller_omc800.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7558/solas_lexor_4_rubex_propeller_omc800.html Solas HR Lexor-3 Blade Rubex Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Interchangeable Hub System Thru Hub Exhaust Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7634/solas_lexor_3_rubex_propeller_omc800.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7634/solas_lexor_3_rubex_propeller_omc800.html Solas Lexor-3 Plus Rubex Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Interchangeable Hub System Thru Hub Exhaust Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older All around performance Three blade stainless steel propeller Larger diameter and blade area for big boat loads Excellent high speed performance without sacrificing mid-range speeds Excellent fuel economy for offshore boats The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7636/solas_lexor_3_plus_rubex_propeller_omc800.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7636/solas_lexor_3_plus_rubex_propeller_omc800.html Solas HR Titan-4 Stainless Rubex Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Interchangeable Hub System Thru Hub Exhaust Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7559/solas_hr_titan_4_rubex_propeller_omc800.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7559/solas_hr_titan_4_rubex_propeller_omc800.html Solas Amita-4 Blade Aluminum Rubex Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7557/solas_amita_4_rubex_propeller_omc800.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7557/solas_amita_4_rubex_propeller_omc800.html Solas Amita-3 Blade Aluminum Rubex Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7556/solas_amita_3_rubex_propeller_omc800.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7556/solas_amita_3_rubex_propeller_omc800.html Solas Titan-3 Propeller fits OMC Model 400, Cobra Drives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7633/solas_titan_3_propeller_omc400.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7633/solas_titan_3_propeller_omc400.html Solas New Saturn-3 Blade Rubex Stainless Propeller fits OMC Model 400 & Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7555/solas_new_saturn_3_rubex_propeller_omc400.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7555/solas_new_saturn_3_rubex_propeller_omc400.html Solas HR Titan-4 Rubex Propeller fits OMC Model 400, Cobra Drives... (Hi-Rake) Interchangeable Hub System Thru Hub Exhaust 13 Tooth Spline Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7632/solas_hr_titan_4_rubex_propeller_omc400.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7632/solas_hr_titan_4_rubex_propeller_omc400.html Solas Aluminum Amita-4 Rubex Blade Propeller fits OMC Model 400 & Cobra Sterndrives... Interchangeable Hub System Thru Hub Exhaust 13 Tooth Spline Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7554/solas_amita_4_rubex_propeller_omc400.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7554/solas_amita_4_rubex_propeller_omc400.html Solas Aluminum Amita-3 Blade Rubex Propeller Fits OMC Model 400 & Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Requires XHS Hub Kit # 106 (Not Included) Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7553/solas_amita_3_rubex_propeller_omc400.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7553/solas_amita_3_rubex_propeller_omc400.html Solas Titan Stainless Steel 3 Blade Propeller fits the following Engine/Drive applications... Bravo Two 4.3L, LH, EFI 5.0L, EFI 5.7L, EFI 350 Mag MPI 454 Mag MPI 502 Mag MPI D2.8L DTronic D3.6L D4.2L DTronic D7.3L DTronic 7.4L MPI The newly developed MF Titan series propeller is specially designed to match the Bravo Two driving system. With its excellent efficiency and performance makes the new MF Titan series the best choice for the sport fishing application. http://www.getaprop.com/content-product_info/product_id-7561/solas_titan_bravo_2_propeller.html http://www.getaprop.com/images/products/br2solas.JPG http://www.getaprop.com/content-product_info/product_id-7561/solas_titan_bravo_2_propeller.html Solas Aluminum 3 Blade Bravo 2 Propeller fits the following Bravo Two Engine/Drive applications... 4.3L, LH, EFI 5.0L, EFI 5.7L, EFI 350 Mag MPI 454 Mag MPI 502 Mag MPI D2.8L DTronic D3.6L D4.2L DTronic D7.3L DTronic 7.4L MPI Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7560/solas_amita_bravo_2_propeller.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7560/solas_amita_bravo_2_propeller.html Solas New Saturn-3 Rubex Stainless Propeller Fits Mercruiser Alpha/Bravo One Drives... Interchangeable Hub System Thru-Hub Exhaust & 15 or 19 Tooth Spline Requires XHS Hub Kit 102 (Not Included) 15 Spline Requires RBX Hub Kit 123 (Not Included) XR Drive 19 Spline When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7550/solas_new_saturn_3_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7550/solas_new_saturn_3_rubex_propeller_mercruiser.html Solas Lexor-4 Rubex Stainless Propeller Fits Mercruiser Alpha/Bravo One Drives Interchangeable Hub System Thru-Hub Exhaust & 15 or 19 Tooth Spline Requires XHS Hub Kit 102 (Not Included) 15 Spline Requires RBX Hub Kit 123 (Not Included) XR Drive 19 Spline Lexor-4 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The Lexor series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7547/solas_lexor_4_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/SLEXOR4RUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7547/solas_lexor_4_rubex_propeller_mercruiser.html "New" Solas Lexor-3 Rubex Stainless Propeller Fits Mercruiser Alpha/Bravo One Drives Interchangeable Hub System Thru-Hub Exhaust & 15 or 19 Tooth Spline Requires XHS Hub Kit 102 (Not Included) 15 Spline Requires RBX Hub Kit 123 (Not Included) XR Drive 19 Spline Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7614/solas_lexor_3_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-7614/solas_lexor_3_rubex_propeller_mercruiser.html Solas Lexor-3 Plus Rubex Propeller Fits Mercruiser Alpha/Bravo One Drives Interchangeable Hub System Thru-Hub Exhaust & 15 or 19 Tooth Spline Requires XHS Hub Kit 102 (Not Included) 15 Spline Requires RBX Hub Kit 123 (Not Included) XR Drive 19 Spline Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7615/solas_lexor_3_plus_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/newsl3rbxplus.JPG http://www.getaprop.com/content-product_info/product_id-7615/solas_lexor_3_plus_rubex_propeller_mercruiser.html Solas HR Titan-4 Rubex Stainless Propeller Fits Mercruiser Alpha/Bravo One Drives... Interchangeable Hub System Thru-Hub Exhaust & 15 or 19 Tooth Spline Requires XHS Hub Kit 102 (Not Included) 15 Spline Requires RBX Hub Kit 123 (Not Included) XR Drive 19 Spline In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7549/solas_hr_titan_4_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7549/solas_hr_titan_4_rubex_propeller_mercruiser.html Solas Amita-4 Rubex Aluminum Propeller Mercruiser Alpha/Bravo One Drives Requires XHS Hub Kit # 102 (Not Included) Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7546/solas_amita_4_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7546/solas_amita_4_rubex_propeller_mercruiser.html Solas Amita-3 Rubex Aluminum Propeller Fits Mercruiser Alpha/Bravo One Drives Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7616/solas_amita_rubex_propeller_mercruiser.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7616/solas_amita_rubex_propeller_mercruiser.html Solas Amita-3 Plus Aluminum Propeller Fits Mercruiser Alpha/Bravo One Drives Rubber Hub Bushing Thru Hub Exhaust SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7545/solas_amita_plus_propeller_mercruiser.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7545/solas_amita_plus_propeller_mercruiser.html Solas Amita-4 Rubex Aluminum Propeller Fits 150-300 HP Yamaha Outboards ... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7514/solas_amita_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7514/solas_amita_4_rubex_propeller_yamaha.html Solas Amita-3 Rubex Aluminum Propeller Fits 150-300 HP Yamaha Outboards... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7512/solas_amita_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7512/solas_amita_3_rubex_propeller_yamaha.html Solas Amita-3 Plus Aluminum Propeller Fits 150-300 HP Yamaha Outboards...(Larger Diameter,Heavier Boats) Rubber Hub Bushing Thru-Hub Exhaust & 15 Tooth Spline 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7513/solas_amita_3_plus_propeller_yamaha.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7513/solas_amita_3_plus_propeller_yamaha.html Solas Titan-3 Stainless Propeller fits 75-130 HP Yamaha Outboards... Rubber Hub Bushing Thru Hub Exhaust T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7508/solas_titan_3_propeller_yamaha.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7508/solas_titan_3_propeller_yamaha.html Solas New Saturn-3 Rubex Stainless Propeller fits 90-130 HP Yamaha Outboards... Interchangable Hub System Thru Hub Exhaust T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7506/solas_new_saturn_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7506/solas_new_saturn_rubex_propeller_yamaha.html Solas HR Titan-4 Rubex Stainless Propeller fits 75-130 HP Yamaha Outboards... (High Rake) Interchangable Hub System Thru Hub Exhaust T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7505/solas_hr_titan_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7505/solas_hr_titan_4_rubex_propeller_yamaha.html Solas Amita-4 Rubex Aluminum Propeller fits 50-130 HP Yamaha Outboards... Interchangable Hub System Thru Hub Exhaust T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7504/solas_amita_4_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7504/solas_amita_4_rubex_propeller_yamaha.html Solas Amita-3 Rubex Aluminum Propeller fits 50-130 HP Yamaha Outboards... Interchangable Hub System Thru Hub Exhaust T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7503/solas_amita_3_rubex_propeller_yamaha.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7503/solas_amita_3_rubex_propeller_yamaha.html Solas New Saturn 3 Blade Stainless Propeller Fits 40-60 HP Yamaha Outboards... (Larger Blade Area) 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7501/solas_new_saturn_3_propeller_yamaha.html http://www.getaprop.com/images/products/NEW SATURN.JPG http://www.getaprop.com/content-product_info/product_id-7501/solas_new_saturn_3_propeller_yamaha.html Solas Amita 4 Blade Aluminum Propeller Fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7500/solas_amita_4_propeller_yamaha.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7500/solas_amita_4_propeller_yamaha.html Solas Amita 3 Blade Aluminum Propeller Fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7499/solas_amita_3_propeller_yamaha.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7499/solas_amita_3_propeller_yamaha.html Solas New Saturn-4 Stainless Propeller fits 20-30hp Yamaha Outboards... 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001~ 30 HP (Four Stroke) 2001~ 30 HP 1979 and Newer Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7497/solas_new_saturn_4_propeller_yamaha.html http://www.getaprop.com/images/products/ns4b.JPG http://www.getaprop.com/content-product_info/product_id-7497/solas_new_saturn_4_propeller_yamaha.html Solas New Saturn Stainless Propeller Fits 20-30 HP Yamaha Outboards... 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001~ 30 HP (Four Stroke) 2001~ 30 HP 1979 and Newer Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7498/solas_new_saturn_3_propeller_yamaha.html http://www.getaprop.com/images/products/newsatrw.JPG http://www.getaprop.com/content-product_info/product_id-7498/solas_new_saturn_3_propeller_yamaha.html Solas Amita-4 Rubex Aluminum Propeller fits 150-250 HP Suzuki Outboards... Thru-Hub Exhaust & 15 Tooth Spline Interchangeable Hub System Requires XHS Hub Kit # 104 (Not Included) DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7481/solas_amita_4_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7481/solas_amita_4_rubex_propeller_suzuki.html Solas Amita-3 Rubex Aluminum Propeller fits 150-250 HP Suzuki Outboards... Thru-Hub Exhaust & 15 Tooth Spline Interchangable Hub System Requires XHS Hub Kit # 104 (Not Included) DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7480/solas_amita_3_rubex_propeller_suzuki.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7480/solas_amita_3_rubex_propeller_suzuki.html Solas New Saturn Stainless Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7472/solas_new_saturn_3_propeller_suzuki.html http://www.getaprop.com/images/products/saturn[2].jpg http://www.getaprop.com/content-product_info/product_id-7472/solas_new_saturn_3_propeller_suzuki.html Solas Amita-4 Aluminum Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7471/solas_amita_4_propeller_suzuki.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7471/solas_amita_4_propeller_suzuki.html Solas Amita-3 Plus Aluminum Propeller fits 35-65 HP Suzuki Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7470/solas_amita_3_plus_propeller_suzuki.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7470/solas_amita_3_plus_propeller_suzuki.html Solas Amita-4 Rubex Aluminum Propeller fits 60-140 HP Nissan Tohatsu Outboards... Interchangeable Hub System Requires XHS Hub Kit #109 Thru Hub Exhaust 15 Tooth Spline 60C (Large Gearcase) 1999 Thru 70C (Large Gearcase) All Years 90 HP 1987 and Newer 115 HP 1992 and Newer 120 HP 1988 and Newer 140 HP 1988 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7390/solas_amita_4_rubex_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7390/solas_amita_4_rubex_propeller_nissan_tohatsu.html Solas Amita-3 Rubex Aluminum Propeller fits 60-140 HP Nissan Tohatsu Outboards... Interchangable Hub System Requires XHS Hub Kit #109 Thru Hub Exhaust 15 Tooth Spline 60C (Large Gearcase) 1999 Thru 70C (Large Gearcase) All Years 90 HP 1987 and Newer 115 HP 1992 and Newer 120 HP 1988 and Newer 140 HP 1988 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7389/solas_amita_3_rubex_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7389/solas_amita_3_rubex_propeller_nissan_tohatsu.html Solas Saturn-3 Stainless Propeller fits 25-35hp Nissan Tohatsu Outboards... 25 HP All Years 30 HP All Years Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7374/solas_saturn_3_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/saturn[2].jpg http://www.getaprop.com/content-product_info/product_id-7374/solas_saturn_3_propeller_nissan_tohatsu.html Solas New Saturn-4 Stainless Propeller fits 25-35hp Nissan Tohatsu Outboards... 25 HP 1986-2001 25 HP (4-Stroke) 2002~ 30 HP 1985-2001 30 HP (4-Stroke) 2002~ Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7754/solas_new_saturn_4_propeller_nissan_tohatsu.html http://www.getaprop.com/images/products/ns4b.JPG http://www.getaprop.com/content-product_info/product_id-7754/solas_new_saturn_4_propeller_nissan_tohatsu.html Solas Amita-4 Rubex Aluminum Propeller Mercruiser Fits 135-300 Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7600/solas_amita_4_rubex_propeller_mercury.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7600/solas_amita_4_rubex_propeller_mercury.html Solas Amita-3 Rubex Aluminum Propeller Fits 135-300 Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7599/solas_amita_3_rubex_propeller_mercury.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7599/solas_amita_3_rubex_propeller_mercury.html Solas Amita-3 Plus Aluminum Propeller Fits 135-300 Mercury Outboards... (Larger Diameter For Heavier Boats) Rubber Hub Bushing Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7598/solas_amita_3_plus_propeller_mercury.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7598/solas_amita_3_plus_propeller_mercury.html Solas Titan-3 Stainless Propeller fits 60-140 HP Mercury Outboards... Rubber Hub Bushing Thru Hub Exhaust & 15 Tooth Spline 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7593/solas_titan_3_propeller_mercury.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7593/solas_titan_3_propeller_mercury.html Solas New Saturn-3 Rubex Stainless Propeller fits 40-140 HP Mercury Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7592/solas_new_saturn_rubex_propeller_mercury.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7592/solas_new_saturn_rubex_propeller_mercury.html Solas HR Titan-4 Rubex Stainless Propeller fits 40-140 HP Mercury Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7591/solas_hr_titan_4_rubex_propeller_mercury.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7591/solas_hr_titan_4_rubex_propeller_mercury.html Solas Amita-4 Aluminum Propeller Fits 40-140 HP Mercury Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7590/solas_amita_4_rubex_propeller_mercury.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7590/solas_amita_4_rubex_propeller_mercury.html Solas Amita-3 Rubex Propeller Fits 40-140 HP Mercury Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7589/solas_amita_3_rubex_propeller_mercury.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7589/solas_amita_3_rubex_propeller_mercury.html Solas New Saturn 3 Blade Stainless Propeller Fits 25-70 HP Mercury Outboards... (Larger Blade Area) Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7586/solas_new_saturn_3_propeller_mercury.html http://www.getaprop.com/images/products/NEW SATURN.JPG http://www.getaprop.com/content-product_info/product_id-7586/solas_new_saturn_3_propeller_mercury.html Solas Amita 4 Blade Aluminum Propeller Fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7585/solas_amita_4_propeller_mercury.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7585/solas_amita_4_propeller_mercury.html Solas Amita 3 Blade Aluminum Propeller Fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7583/solas_amita_3_propeller_mercury.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7583/solas_amita_3_propeller_mercury.html Solas Amita-3 Plus Aluminum Propeller Fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7584/solas_amita_3_plus_propeller_mercury.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7584/solas_amita_3_plus_propeller_mercury.html Solas Amita-4 Rubex Aluminum Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 107 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7352/solas_amita_4_rubex_propeller_honda.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7352/solas_amita_4_rubex_propeller_honda.html Solas Amita-3 Rubex Aluminum Propeller Fits 135-225 HP Honda Outboards...(Larger Diameter,Heavier Boats) Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 107 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7350/solas_amita_3_rubex_propeller_honda.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7350/solas_amita_3_rubex_propeller_honda.html Solas Amita-3 Plus Aluminum Propeller Fits 135-225 HP Honda Outboards...(Larger Diameter,Heavier Boats) Rubber Hub Bushing Thru Hub Exhaust & 15 Tooth Spline. 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7351/solas_amita_3_plus_propeller_honda.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7351/solas_amita_3_plus_propeller_honda.html Solas Titan-3 Stainless Propeller fits 75-130 HP Honda Outboards... Rubber Hub Bushing Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Titan propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7432/solas_titan_3_propeller_honda.html http://www.getaprop.com/images/products/SOL1.JPG http://www.getaprop.com/content-product_info/product_id-7432/solas_titan_3_propeller_honda.html Solas New Saturn-3 Rubex Stainless Propeller fits 75-130 HP Honda Outboards... Interchangable Hub System Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7430/solas_new_saturn_rubex_propeller_honda.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7430/solas_new_saturn_rubex_propeller_honda.html Solas HR Titan-4 Rubex Stainless Propeller fits 75-130 HP Honda Outboards... Interchangable Hub System Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7429/solas_hr_titan_4_rubex_propeller_honda.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-7429/solas_hr_titan_4_rubex_propeller_honda.html Solas Amita-4 Aluminum Propeller fits 75-130 HP Honda Outboards... Rubber Hub Bushing Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7428/solas_amita_4_rubex_propeller_honda.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7428/solas_amita_4_rubex_propeller_honda.html Solas Amita-3 Rubex Aluminum Propeller fits 75-130 HP Honda Outboards... Interchangable Hub System Thru Hub Exhaust & 15 Tooth Spline 75 HP 1995 and Newer 90 HP 1995 and Newer 115 HP 1998 and Newer 130 HP 1998 and Newer Requires XHS Hub Kit # 102 (Not Included) 75-90 HP 1995-98 Requires XHS Hub Kit # 107 (Not Included) 75,90,115,130 HP 1999 and Newer. Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7427/solas_amita_3_rubex_propeller_honda.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7427/solas_amita_3_rubex_propeller_honda.html Solas Saturn 3 Blade Stainless Propeller Fits 35-60 HP Honda Outboards... BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7419/solas_saturn_3_propeller_honda.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7419/solas_saturn_3_propeller_honda.html Solas New Saturn 3 Blade Stainless Propeller Fits 35-60 HP Honda Outboards... (Larger Blade Area) BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7418/solas_new_saturn_3_propeller_honda.html http://www.getaprop.com/images/products/NEW SATURN.JPG http://www.getaprop.com/content-product_info/product_id-7418/solas_new_saturn_3_propeller_honda.html Solas Amita 4 Blade Aluminum Propeller Fits 35-60 HP Honda Outboards... BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7417/solas_amita_4_propeller_honda.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7417/solas_amita_4_propeller_honda.html Solas Amita 3 Blade Aluminum Propeller Fits 35-60 HP Honda Outboards... BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7416/solas_amita_3_propeller_honda.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7416/solas_amita_3_propeller_honda.html Solas Saturn-3 Stainless Propeller fits 25-35hp Honda Outboards... 25 HP All Years 30 HP All Years Rubber Hub Bushing. Thru Hub Exhaust 10 Tooth Spline The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7410/solas_saturn_3_propeller_honda.html http://www.getaprop.com/images/products/saturn[2].jpg http://www.getaprop.com/content-product_info/product_id-7410/solas_saturn_3_propeller_honda.html Solas New Saturn-3 Blade Rubex Propeller fits 75-150 HP Force Outboards... Interchangable Hub System Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the New Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-7821/solas_new_saturn_3_rubex_propeller_force.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-7821/solas_new_saturn_3_rubex_propeller_force.html Solas HR Titan-4 Propeller fits 75-150 HP Force Outboards... (Hi-Rake) Interchangable Hub System Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer In addition to its high rake and large cupping design, this 4 blade design can deliver not only a very powerful thrust, but also a smooth operation. This propeller series offers excellent cruising performance and maneuvering capability, and is ideal for offshore applications. The High Rake Titan series is very suitable for high speed planing hulls. High rake blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8674/solas_hr_titan_4_rubex_propeller_force.html http://www.getaprop.com/images/products/HR4RUBEX2.JPG http://www.getaprop.com/content-product_info/product_id-8674/solas_hr_titan_4_rubex_propeller_force.html Solas Amita-4 Blade Propeller fits 75-150 HP Force Outboards... Interchangable Hub System Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7820/solas_amita_4_rubex_propeller_force.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7820/solas_amita_4_rubex_propeller_force.html Solas Amita-3 Blade Propeller fits 75-150 HP Force Outboards... Interchangable Hub System Dual Exhaust Units Thru Hub Exhaust & 15 Tooth Spline 75-150 HP 1995 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7819/solas_amita_3_rubex_propeller_force.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7819/solas_amita_3_rubex_propeller_force.html Solas Saturn 3 Blade Stainless Propeller Fits 40-75 HP Force Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-99 SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7818/solas_saturn_3_propeller_force.html http://www.getaprop.com/images/products/saturn.JPG http://www.getaprop.com/content-product_info/product_id-7818/solas_saturn_3_propeller_force.html Solas Amita 4 Blade Aluminum Propeller Fits 40-75 HP Force Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-99 SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7817/solas_amita_4_propeller_force.html http://www.getaprop.com/images/products/amita1[1].jpg http://www.getaprop.com/content-product_info/product_id-7817/solas_amita_4_propeller_force.html Solas Amita 3 Blade Aluminum Propeller Fits 40-75 HP Force Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-99 SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7816/solas_amita_3_propeller_force.html http://www.getaprop.com/images/products/sappl.JPG http://www.getaprop.com/content-product_info/product_id-7816/solas_amita_3_propeller_force.html Aluminum Solas Amita-4 Rubex Propeller Evinrude/Johnson... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Outstanding acceleration Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7294/solas_amita_4_rubex_propeller_e_j.html http://www.getaprop.com/images/products/SA4RUBEXXX.JPG http://www.getaprop.com/content-product_info/product_id-7294/solas_amita_4_rubex_propeller_e_j.html Aluminum Solas Amita-3 Rubex Propeller Fits Evinrude/Johnson... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7293/solas_amita_3_rubex_propeller_e_j.html http://www.getaprop.com/images/products/NEWSARUBEX.JPG http://www.getaprop.com/content-product_info/product_id-7293/solas_amita_3_rubex_propeller_e_j.html Solas Amita-3 Plus Aluminum Propeller Fits 90-300 HP Evinrude/Johnson Outboards... (Larger Diameter,Heavier Boats) Rubber Hub Bushing Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 200,225,250HP E-TEC 2005 and Newer Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation SOLAS aluminum propellers have 4 layers of paint. Using superior coatings and a high-tech painting process ensures excellent anti-corrosion performance. SOLAS aluminum propellers are exposed to over 500 hours of testing in a salt water spray tank. This testing simulates more than 6 months of normal salt water use. http://www.getaprop.com/content-product_info/product_id-7291/solas_amita_3_plus_propeller_e_j.html http://www.getaprop.com/images/products/SOL3.JPG http://www.getaprop.com/content-product_info/product_id-7291/solas_amita_3_plus_propeller_e_j.html 4" Borg Warner Split Propeller Shaft Coupling... Bore Range:1" Thru 1 1/4" Flange Diameter:4" Bolt Diameter:3/8" # of Bolts:4 Bolt Circle:3 1/4" Pilot Diameter:2 1/2 x 3/32M Coupling Length:2" http://www.getaprop.com/content-product_info/product_id-6958/borg_warner_split_coupling_4_s.html http://www.getaprop.com/images/products/61616[1].jpg http://www.getaprop.com/content-product_info/product_id-6958/borg_warner_split_coupling_4_s.html Acme Propeller Puller is a precision tool essential to removeing any ski boat propeller. Cast in stainless steel to last the life of your boat. The Acme Prop Puller is able to pull any 3 or 4 blade ski boat prop with a 1" or 1-1/4'' prop shaft. http://www.getaprop.com/content-product_info/product_id-8601/acme_propeller_puller.html http://www.getaprop.com/images/products/acpuller.JPG http://www.getaprop.com/content-product_info/product_id-8601/acme_propeller_puller.html 7 1/4" Allison.... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 7 1/4" # Of Bolts:6 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:8 3/8" http://www.getaprop.com/content-product_info/product_id-1435/drivesaver_7256.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-1435/drivesaver_7256.html 14 x 12 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD2030, MD7B-2002, MD11C. http://www.getaprop.com/content-product_info/product_id-6860/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-6860/volvo_penta_s_drive_propeller.html 17 x 14 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #2003T http://www.getaprop.com/content-product_info/product_id-3835/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3835/volvo_penta_s_drive_propeller.html 16 x 11 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD21 http://www.getaprop.com/content-product_info/product_id-3834/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3834/volvo_penta_s_drive_propeller.html 15 x 12 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD21 http://www.getaprop.com/content-product_info/product_id-3833/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3833/volvo_penta_s_drive_propeller.html 17 x 13 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD17D http://www.getaprop.com/content-product_info/product_id-3832/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3832/volvo_penta_s_drive_propeller.html 15 x 13 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD11D-2003, MD17C. http://www.getaprop.com/content-product_info/product_id-3831/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3831/volvo_penta_s_drive_propeller.html 14 x 9 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD7A http://www.getaprop.com/content-product_info/product_id-3830/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3830/volvo_penta_s_drive_propeller.html 17 x 12 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD22 http://www.getaprop.com/content-product_info/product_id-3829/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3829/volvo_penta_s_drive_propeller.html 17 x 15 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD22L http://www.getaprop.com/content-product_info/product_id-3828/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3828/volvo_penta_s_drive_propeller.html 18 x 16 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #D2-75 http://www.getaprop.com/content-product_info/product_id-3827/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3827/volvo_penta_s_drive_propeller.html 17 x 16 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #D2-55 http://www.getaprop.com/content-product_info/product_id-3826/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3826/volvo_penta_s_drive_propeller.html 14 x 11 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD2020, MD7B-2002. http://www.getaprop.com/content-product_info/product_id-3823/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3823/volvo_penta_s_drive_propeller.html 14 x 12 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD2030, MD7B-2002, MD11C. http://www.getaprop.com/content-product_info/product_id-3824/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/VOLSA1.jpg http://www.getaprop.com/content-product_info/product_id-3824/volvo_penta_s_drive_propeller.html 14 x 9 X 3 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model #MD7A http://www.getaprop.com/content-product_info/product_id-6387/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/3 bld.JPG http://www.getaprop.com/content-product_info/product_id-6387/volvo_penta_s_drive_propeller.html 16 x 11 x 2 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model # MD2020,MD7B-2002, MD11C, MD11D-2003. http://www.getaprop.com/content-product_info/product_id-6388/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/2 bld.JPG http://www.getaprop.com/content-product_info/product_id-6388/volvo_penta_s_drive_propeller.html 14 x 8 x 2 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model # MD2010 http://www.getaprop.com/content-product_info/product_id-6861/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/SA2.jpg http://www.getaprop.com/content-product_info/product_id-6861/volvo_penta_s_drive_propeller.html 19 x 17 x 2 Blade Volvo Penta S Drive Propeller... Fits Volvo Penta S Drive Engine Model # D2-75 http://www.getaprop.com/content-product_info/product_id-3843/volvo_penta_s_drive_propeller.html http://www.getaprop.com/images/products/SA2.jpg http://www.getaprop.com/content-product_info/product_id-3843/volvo_penta_s_drive_propeller.html 14.25 LH 19 Stiletto ADVANTAGE II Propeller Fits Volvo Penta SX Drives... Volvo Penta - SX Drive - Stainless Propeller for Volvo Penta SX Cobra, Volvo Penta SX, OMC SX Cobra 3.0 L (19 Tooth Spline) Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-8577/stiletto_propeller_volvo_s_x_40219.html http://www.getaprop.com/images/products/STIL1.jpg http://www.getaprop.com/content-product_info/product_id-8577/stiletto_propeller_volvo_s_x_40219.html Volvo Penta Type "B-7" Rear Duo-Prop Aluminum Propeller for Volvo Penta 280-290 Drives ... Builder return, ready to install, like new condition... For all engines with speeds in excess of 35 knots, the stainless steel Type C propeller should be used Aluminum DP propeller for gasoline and diesel engines. The two 3-blade propellers have very thin blade profiles, demanding the highest level of precision. http://www.getaprop.com/content-product_info/product_id-9016/volvo_penta_b_7_rear_854836.html http://www.getaprop.com/images/products/DPBR.jpg http://www.getaprop.com/content-product_info/product_id-9016/volvo_penta_b_7_rear_854836.html 14.50 RH 15 Solas New Saturn-3 Rubex Stainless Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 107 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9051/solas_new_saturn_rubex_9531_145_15.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-9051/solas_new_saturn_rubex_9531_145_15.html 15.75 LH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 107 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Luxor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9053/solas_lexor_rubex_9572_158_15.html http://www.getaprop.com/images/products/LH.JPG http://www.getaprop.com/content-product_info/product_id-9053/solas_lexor_rubex_9572_158_15.html 15.75 RH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 135-225 HP Honda Outboards... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. Requires XHS Hub Kit # 107 (Not Included) 2002 & Newer 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Luxor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9052/solas_lexor_rubex_9571_158_15.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-9052/solas_lexor_rubex_9571_158_15.html 13" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Available Bushing Kit 908BB 7/8" TO 5/8" Bolt holes Flange Diameter:13" # Of Bolts:8 Bolt Diameter:7/8" Bolt Circle:11" Pilot Diameter:7" Coupling Diameter:14" http://www.getaprop.com/content-product_info/product_id-1448/drivesaver_1308pr.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1448/drivesaver_1308pr.html 40-300 HP Stingray XPII Hydrofoil... Made with Speed-XP, a unique coating that binds a thin layer of water to the surface, dramatically reducing hydrodynamic drag. This results in even more top-end speed and better fuel efficiency. Plus, the StingRay XPII sports the Vision-3 enhanced styling for great looks and comes standard with Speed Cap hardware covers. Designed for outboards and stern drives from 40hp and up. http://www.getaprop.com/content-product_info/product_id-7395/stingray_hydrofoil_xp_ii.html http://www.getaprop.com/images/products/i018966sn02[1].jpg http://www.getaprop.com/content-product_info/product_id-7395/stingray_hydrofoil_xp_ii.html 30-300 HP SE Sport 300 Turbo Hydrofoil... Streamline Shape Of SE Sport 300 Hydrofoil Gives Quick, Precise Control! Experience faster starts and sharper turns with SE Sport 300 Hydrofoil. The crescent shaped planing surface of this hydrofoil funnels waterflow for more thrust and allows for reduced planing speeds. The unique Turbo Trac locks in on crisp tight turns, while the small footprint and smooth bottom decrease resistance for higher speeds without cavitation. Mounting hardware included. Features: Best top speed Controlled thrust cone and rooster tail results in improved forward thrust Fastest holeshot On Plane up to 50% Faster Reduced Bow Rise Eliminates Chinewalking Stops Porpoising Wipes Out Cavitation Delivers True Stabilization 30%-40% Fuel Efficiency Increase Aids in Pulling Skiers Reduced Hydrodynamic Drag Improved Top-end Speed Better Fuel Efficiency VISION-3 Enhanced Styling SpeedCap Hardware Covers http://www.getaprop.com/content-product_info/product_id-7399/se_sport_turbo_hydrofoil_300.html http://www.getaprop.com/images/products/070306_pg441_11a[1].jpg http://www.getaprop.com/content-product_info/product_id-7399/se_sport_turbo_hydrofoil_300.html 8-150 HP SE Sport 200 Turbo Hydrofoil... Streamline Shape Of SE Sport 200 Hydrofoil Gives Quick, Precise Control! Experience faster starts and sharper turns with SE Sport 200 Hydrofoil. The crescent shaped planing surface of this hydrofoil funnels waterflow for more thrust and allows for reduced planing speeds. The unique Turbo Trac locks in on crisp tight turns, while the small footprint and smooth bottom decrease resistance for higher speeds without cavitation. Mounting hardware included. Features: Best top speed Controlled thrust cone and rooster tail results in improved forward thrust Fastest holeshot On Plane up to 50% Faster Reduced Bow Rise Eliminates Chinewalking Stops Porpoising Wipes Out Cavitation Delivers True Stabilization 30%-40% Fuel Efficiency Increase Aids in Pulling Skiers Reduced Hydrodynamic Drag Improved Top-end Speed Better Fuel Efficiency VISION-3 Enhanced Styling SpeedCap Hardware Covers http://www.getaprop.com/content-product_info/product_id-7398/se_sport_turbo_hydrofoil_200.html http://www.getaprop.com/images/products/070306_pg441_11a[1].jpg http://www.getaprop.com/content-product_info/product_id-7398/se_sport_turbo_hydrofoil_200.html 13 RH 19 Suzuki Aluminum Propeller fits 60-140 HP Suzuki Outboards... DF-60,70 (Four Stroke) 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer 4.25" Gear Case / Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Propeller selection is very important in the performance of your boat. Acceleration, speed, fuel efficiency, stability and engine RPMs all are affected by the propeller selected. Operating requirements and conditions will also affect which design, style and pitch of propeller you may choose to meet your individual needs. The boat and engine combination may have already been tested by your dealer or boat manufacturer for the appropriate propeller size. Let Getaprop.com assist you with the process to determine the correct propeller for your application. http://www.getaprop.com/content-product_info/product_id-8899/suzuki_aluminum_propeller_5810094522019.html http://www.getaprop.com/images/products/SUZAL copy.jpg http://www.getaprop.com/content-product_info/product_id-8899/suzuki_aluminum_propeller_5810094522019.html 14 RH 17 Suzuki Aluminum Propeller fits DF 70-140 HP Suzuki Four Stroke Outboards... DF-70 2009 & Newer DF-80 2009 & Newer DF-90 All Years DF-100 All Years DF-115 All Years DF-140 All Years 4.25" Gear Case / Thru Hub Exhaust 15 Tooth Spline Rubber Hub Bushing Included Propeller selection is very important in the performance of your boat. Acceleration, speed, fuel efficiency, stability and engine RPMs all are affected by the propeller selected. Operating requirements and conditions will also affect which design, style and pitch of propeller you may choose to meet your individual needs. The boat and engine combination may have already been tested by your dealer or boat manufacturer for the appropriate propeller size. Let Getaprop.com assist you with the process to determine the correct propeller for your application. http://www.getaprop.com/content-product_info/product_id-8898/suzuki_aluminum_propeller_5810090j01019.html http://www.getaprop.com/images/products/SUZAL copy.jpg http://www.getaprop.com/content-product_info/product_id-8898/suzuki_aluminum_propeller_5810090j01019.html 16 LH 20 Suzuki Stainless Propeller fits 200-300 HP Suzuki Four Stroke Outboards... DF-200 DF-225 DF-250 DF-300 Up to 2009 Rubber Hub Bushing Included Suzuki Stainless Steel Propellers offer higher performance and greater durability than aluminum propellers. The aggressive design of these propellers enhances the overall performance of your boat and the durability of the stainless steel construction will give you long term dependability. Your Suzuki Stainless Steel propeller is also fitted with a rubber cushion hub to help absorb vibration and shock should you strike a foreign object. http://www.getaprop.com/content-product_info/product_id-8593/suzuki_stainless_propeller_99105008020l.html http://www.getaprop.com/images/products/suz1.jpg http://www.getaprop.com/content-product_info/product_id-8593/suzuki_stainless_propeller_99105008020l.html 10.25 RH 13 Suzuki Stainless Propeller fits 25-30 HP Suzuki Outboards... DT 25C 1989 and Newer DT 20 & 25 1983 and 2000 DT 30-30C 1983-97 DF 25 (Four Stroke) 2000 and Newer DF 30 (Four Stroke) 2000 and Newer Rubber Hub Bushing Included Suzuki Stainless Steel Propellers offer higher performance and greater durability than aluminum propellers. The aggressive design of these propellers enhances the overall performance of your boat and the durability of the stainless steel construction will give you long term dependability. Your Suzuki Stainless Steel propeller is also fitted with a rubber cushion hub to help absorb vibration and shock should you strike a foreign object. http://www.getaprop.com/content-product_info/product_id-8590/suzuki_stainless_propeller_5820096400.html http://www.getaprop.com/images/products/suz40.jpg http://www.getaprop.com/content-product_info/product_id-8590/suzuki_stainless_propeller_5820096400.html 10.50 RH 15 Yamaha OEM Performance Stainless Propeller fits 25-60hp Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing T25 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 30 HP (4-Stroke) 2001-2005 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9041/yamaha_propeller_margyt3b_0315.html http://www.getaprop.com/images/products/yam copy1.jpg http://www.getaprop.com/content-product_info/product_id-9041/yamaha_propeller_margyt3b_0315.html 13.00 LH 17 Yamaha OEM Black Stainless Propeller fits 50-130hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9023/yamaha_propeller_6l6_45930_01_98.html http://www.getaprop.com/images/products/g.k.jpg http://www.getaprop.com/content-product_info/product_id-9023/yamaha_propeller_6l6_45930_01_98.html 7.25 X 7.25 Yamaha OEM Aluminum Propeller fits 3/F2.5hp Outboards... Rubber Hub Bushing Included Thru Hub Exhaust http://www.getaprop.com/content-product_info/product_id-8942/yamaha_propeller_6l5_45945_00_el.html http://www.getaprop.com/images/products/683 copy.jpg http://www.getaprop.com/content-product_info/product_id-8942/yamaha_propeller_6l5_45945_00_el.html 13.75 RH 21 Yamaha OEM Black Stainless Propeller fits 150-300hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8937/yamaha_propeller_6g5_45972_02_98.html http://www.getaprop.com/images/products/BS copy.jpg http://www.getaprop.com/content-product_info/product_id-8937/yamaha_propeller_6g5_45972_02_98.html 14.625 RH 16 Yamaha OEM Aluminum Propeller fits 150-300hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8936/yamaha_propeller_6g5_45952_01_98.html http://www.getaprop.com/images/products/UntitledY copy.jpg http://www.getaprop.com/content-product_info/product_id-8936/yamaha_propeller_6g5_45952_01_98.html 14 RH 19 Yamaha OEM Aluminum Propeller fits 150-300hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8935/yamaha_propeller_6g5_45945_01_98.html http://www.getaprop.com/images/products/UntitledY copy.jpg http://www.getaprop.com/content-product_info/product_id-8935/yamaha_propeller_6g5_45945_01_98.html 13.75 RH 21 Yamaha OEM Aluminum Propeller fits 150-300hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8934/yamaha_propeller_6g5_45943_01_98.html http://www.getaprop.com/images/products/UntitledY copy.jpg http://www.getaprop.com/content-product_info/product_id-8934/yamaha_propeller_6g5_45943_01_98.html 15.25 RH 15 Yamaha OEM Aluminum Propeller fits 150-300hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8933/yamaha_propeller_6g5_45941_00_98.html http://www.getaprop.com/images/products/UntitledY copy.jpg http://www.getaprop.com/content-product_info/product_id-8933/yamaha_propeller_6g5_45941_00_98.html 8.50 X 6.5 Yamaha OEM Aluminum Propeller fits 6/8/F6/F8 Outboards... Thru Hub Exhaust & Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-8932/yamaha_propeller_6g1_45947_00_el.html http://www.getaprop.com/images/products/664Y copy.jpg http://www.getaprop.com/content-product_info/product_id-8932/yamaha_propeller_6g1_45947_00_el.html 13 RH 23 Yamaha OEM Aluminum Propeller fits 50-130hp Outboards... D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8931/yamaha_propeller_6e5_45952_00_el.html http://www.getaprop.com/images/products/UntitledY copy.jpg http://www.getaprop.com/content-product_info/product_id-8931/yamaha_propeller_6e5_45952_00_el.html 13.50 RH 15 Yamaha OEM Aluminum Propeller fits 50-130hp Outboards... D Class 3 & 4 Stroke 50-130 HP 4 1/4" Gearcase 15 Tooth Spline, Thru Hub Exhaust Rubber OEM Hub Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9043/yamaha_propeller_6e5_45947_00_el.html http://www.getaprop.com/images/products/UntitledY copy.jpg http://www.getaprop.com/content-product_info/product_id-9043/yamaha_propeller_6e5_45947_00_el.html 15.50 LH 21 Yamaha OEM Stainless Saltwater II XL Propeller fits F300-350 Outboards... Thru Hub Exhaust & Rubber Hub Bushing Included FOR 5.3L V8 MODELS F300/LF300/F350/LF350 http://www.getaprop.com/content-product_info/product_id-8930/yamaha_propeller_6ax_45974_00_00.html http://www.getaprop.com/images/products/YAMSWS2 copy.jpg http://www.getaprop.com/content-product_info/product_id-8930/yamaha_propeller_6ax_45974_00_00.html 15.50 RH 21 Yamaha OEM Stainless Saltwater II XL Propeller fits F300-350 Outboards... Thru Hub Exhaust & Rubber Hub Bushing Included FOR 5.3L V8 MODELS F300/LF300/F350/LF350 http://www.getaprop.com/content-product_info/product_id-8929/yamaha_propeller_6aw_45974_00_00.html http://www.getaprop.com/images/products/YAMSWS2 copy.jpg http://www.getaprop.com/content-product_info/product_id-8929/yamaha_propeller_6aw_45974_00_00.html 11.625 X 11 Yamaha OEM Aluminum Propeller fits T25 Outboards... Thru Hub Exhaust & Rubber Hub Bushing Included Yamaha design and performance in a low-cost, lightweight propeller. A good all-around choice for your Yamaha outboard. http://www.getaprop.com/content-product_info/product_id-8928/yamaha_propeller_69w_45947_00_el.html http://www.getaprop.com/images/products/664Y copy.jpg http://www.getaprop.com/content-product_info/product_id-8928/yamaha_propeller_69w_45947_00_el.html 14.00 X 11 Yamaha OEM T60 Dual Thrust Aluminum Propeller. Thru Hub Exhaust & Rubber Hub Bushing Included Yamahas Dual Thrust propellers are another answer for heavy loads such as sailboats, pontoons, and other high-displacement craftreally any boat requiring that extra bit of muscle. The unique, patented design directs the exhaust flow away from the blades, reducing ventilation so your blades are cutting through clean water. The result? High efficiency, better acceleration, more control, providing up to 70% more thrust in reverse and 60% more in forward than other three blade propellers. Primarliy designed for Yamaha's High Thrust model outboards... http://www.getaprop.com/content-product_info/product_id-8927/yamaha_propeller_68s_45941_00el.html http://www.getaprop.com/images/products/Y6G11 copy.jpg http://www.getaprop.com/content-product_info/product_id-8927/yamaha_propeller_68s_45941_00el.html 13.00 RH 21 Yamaha OEM Black Stainless Propeller fits 50-130hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9027/yamaha_propeller_688_45972_0298.html http://www.getaprop.com/images/products/g.k.jpg http://www.getaprop.com/content-product_info/product_id-9027/yamaha_propeller_688_45972_0298.html 13.00 RH 17 Yamaha OEM Black Stainless Propeller fits 50-130hp Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-9026/yamaha_propeller_688_45930_0298.html http://www.getaprop.com/images/products/g.k.jpg http://www.getaprop.com/content-product_info/product_id-9026/yamaha_propeller_688_45930_0298.html 9.25 X 12 Yamaha OEM Aluminum Propeller fits 9.9-20hp Outboards... Thru Hub Exhaust & 8 Tooth Spline Rubber Hub Bushing Included 9.9/F9.9/15/F15/F20 http://www.getaprop.com/content-product_info/product_id-8925/yamaha_propeller_683_45941_00_el.html http://www.getaprop.com/images/products/664Y copy.jpg http://www.getaprop.com/content-product_info/product_id-8925/yamaha_propeller_683_45941_00_el.html 9.87 X 11.25 Yamaha OEM Aluminum Propeller fits 20-30hp Outboards... Thru Hub Exhaust & 10 Tooth Spline Rubber Hub Bushing 20 HP 1996-97 25 HP 1980 and Newer 25 HP (Four Stroke) 2001 30 HP (Four Stroke) 2001 30 HP 1979 and Newer http://www.getaprop.com/content-product_info/product_id-8924/yamaha_propeller_664_45947_01_el.html http://www.getaprop.com/images/products/664Y copy.jpg http://www.getaprop.com/content-product_info/product_id-8924/yamaha_propeller_664_45947_01_el.html 10 3&#8260;4 X 17 Yamaha OEM Aluminum Propeller fits 25-60hp Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing T25 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 30 HP (4-Stroke) 2001-2005 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8922/yamaha_propeller_663_45941_01_el.html http://www.getaprop.com/images/products/664Y copy.jpg http://www.getaprop.com/content-product_info/product_id-8922/yamaha_propeller_663_45941_01_el.html 09.25 X 10 Yamaha OEM Aluminum Propeller fits 9.9-20hp Outboards... Thru Hub Exhaust & 8 Tooth Spline Rubber Hub Bushing Included 9.9/F9.9/15/F15/F20 http://www.getaprop.com/content-product_info/product_id-8921/yamaha_propeller_63v_45952_10_el.html http://www.getaprop.com/images/products/664Y copy.jpg http://www.getaprop.com/content-product_info/product_id-8921/yamaha_propeller_63v_45952_10_el.html 14.50 RH 15 Solas New Saturn-3 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9057/solas_new_saturn_rubex_9531_145_15.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-9057/solas_new_saturn_rubex_9531_145_15.html 15.75 LH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9059/solas_lexor_rubex_9572_158_15.html http://www.getaprop.com/images/products/LH.JPG http://www.getaprop.com/content-product_info/product_id-9059/solas_lexor_rubex_9572_158_15.html 15.75 RH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 150-300 HP Yamaha Outboards... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9058/solas_lexor_rubex_9571_158_15.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-9058/solas_lexor_rubex_9571_158_15.html 15 LH 19 Volvo Penta 3 Blade Aluminum Short Hub Propeller For SP200-290 Drives... Builder return, ready to install, like new condition... The increased blade area of the high speed propeller makes it most suitable for use with high power engines and at high revs. In a fast boat this does not only mean increased speed, it also means that a heavily loaded boat will plane more quickly and enjoy better fuel economy. The high speed propeller's excellent reversing characteristics also means faster and safer quayside maneuvering. http://www.getaprop.com/content-product_info/product_id-9039/volvo_penta_short_hub_814630.html http://www.getaprop.com/images/products/volvopentarh1.jpg http://www.getaprop.com/content-product_info/product_id-9039/volvo_penta_short_hub_814630.html 14 LH 15 Volvo Penta 3 Blade Aluminum Short Hub Propeller For SP200-290 Drives... Builder return, ready to install, like new condition... The increased blade area of the high speed propeller makes it most suitable for use with high power engines and at high revs. In a fast boat this does not only mean increased speed, it also means that a heavily loaded boat will plane more quickly and enjoy better fuel economy. The high speed propeller's excellent reversing characteristics also means faster and safer quayside maneuvering. http://www.getaprop.com/content-product_info/product_id-9038/volvo_penta_short_hub_814626.html http://www.getaprop.com/images/products/volvopentarh1.jpg http://www.getaprop.com/content-product_info/product_id-9038/volvo_penta_short_hub_814626.html Volvo Penta Type "D-5" Rear Duo-Prop Aluminum Propeller for Volvo Penta DPS... Builder return, ready to install, like new condition... The aluminum propeller for all gasoline and diesel engines using the DPS drive, with speeds up to 35 knots. For all engines with speeds in excess of 35 knots, the stainless steel Type F propeller should be used. http://www.getaprop.com/content-product_info/product_id-8915/volvo_penta_d_5_rear_3856355.html http://www.getaprop.com/images/products/DPDR.jpg http://www.getaprop.com/content-product_info/product_id-8915/volvo_penta_d_5_rear_3856355.html Volvo Penta Type "B-4" Rear Duo-Prop Aluminum Propeller for Volvo Penta 280-290 Drives ... Builder return, ready to install, like new condition... For all engines with speeds in excess of 35 knots, the stainless steel Type C propeller should be used Aluminum DP propeller for gasoline and diesel engines. The two 3-blade propellers have very thin blade profiles, demanding the highest level of precision. http://www.getaprop.com/content-product_info/product_id-8919/volvo_penta_b_4_rear_854833.html http://www.getaprop.com/images/products/DPBR.jpg http://www.getaprop.com/content-product_info/product_id-8919/volvo_penta_b_4_rear_854833.html Volvo Penta Type "A-6" Front Duo-Prop Aluminum Propeller for Volvo Penta 280-290 Diesel Drives ... Builder return, ready to install, like new condition... Aluminum DP propeller for diesel engines up to D41 engines. The unique design, of the 3-blade propeller in the front and the 4-blade propeller behind, is the key to the outstanding grip in the water. http://www.getaprop.com/content-product_info/product_id-8917/volvo_penta_a_6_front_854779.html http://www.getaprop.com/images/products/DPAF.jpg http://www.getaprop.com/content-product_info/product_id-8917/volvo_penta_a_6_front_854779.html Volvo Penta Type "A-2" Rear Duo-Prop Aluminum Propeller for Volvo Penta 280-290 Diesel Drives ... Builder return, ready to install, like new condition... Aluminum DP propeller for diesel engines up to D41 engines. The unique design, of the 3-blade propeller in the front and the 4-blade propeller behind, is the key to the outstanding grip in the water. http://www.getaprop.com/content-product_info/product_id-8918/volvo_penta_a_2_rear_854785.html http://www.getaprop.com/images/products/DPAR.jpg http://www.getaprop.com/content-product_info/product_id-8918/volvo_penta_a_2_rear_854785.html 14.25 LH 21 Stiletto ADVANTAGE II Propeller Fits Volvo Penta SX Drives... Volvo Penta - SX Drive - Stainless Propeller for Volvo Penta SX Cobra, Volvo Penta SX, OMC SX Cobra 3.0 L (19 Tooth Spline) Rubber Hub Bushing Included http://www.getaprop.com/content-product_info/product_id-8578/stiletto_propeller_volvo_s_x_40221.html http://www.getaprop.com/images/products/STIL1.jpg http://www.getaprop.com/content-product_info/product_id-8578/stiletto_propeller_volvo_s_x_40221.html 14.50 RH 15 Solas New Saturn-3 Rubex Stainless Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Thru Hub Exhaust Solas Amita offers S/S prop performance Exclusive SOLAS squeeze casting process Wide blade design Suitable for high speed operation New Saturn propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The New Saturn series is very suitable for high speed planing hulls. High speed blade design delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9060/solas_new_saturn_rubex_9531_145_15.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-9060/solas_new_saturn_rubex_9531_145_15.html 15.75 LH 15 Solas Lexor-3 Rubex Stainless Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9062/solas_lexor_rubex_9572_158_15.html http://www.getaprop.com/images/products/LH.JPG http://www.getaprop.com/content-product_info/product_id-9062/solas_lexor_rubex_9572_158_15.html 15.75 RH 15 Solas Lexor-3 Rubex Stainless Propeller Fits Volvo Penta SX Drives... Interchangeable Hub System Requires XHS Hub Kit # 105 (Not Included) Lexor-3 propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9061/solas_lexor_rubex_9571_158_15.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-9061/solas_lexor_rubex_9571_158_15.html 15 RH 17 Michigan 3 Blade Aluminum propeller fits Volvo S/X drives... Builder return, ready to install, new condition... The increased blade area of the high speed propeller makes it most suitable for use with high power engines and at high revs. In a fast boat this does not only mean increased speed, it also means that a heavily loaded boat will plane more quickly and enjoy better fuel economy. The high speed propeller's excellent reversing characteristics also means faster and safer quayside maneuvering. http://www.getaprop.com/content-product_info/product_id-9040/michigan_propeller_volvo_s_x_161002.html http://www.getaprop.com/images/products/KFFK.jpg http://www.getaprop.com/content-product_info/product_id-9040/michigan_propeller_volvo_s_x_161002.html Long Hub Aluminum High Speed Propeller For SP200-290 Drives... Closeout item (Limited to stock on hand...) High gloss black powder coat finish minimizes speed loss from drag and protects aluminum propeller Cushioned rubber hub absorbs impact and reduces the potential for lower unit damage. Michigan Match propellers are backed by Michigan Wheel's limited lifetime warranty. http://www.getaprop.com/content-product_info/product_id-8902/michigan_long_hub_propeller.html http://www.getaprop.com/images/products/mwcvolvo.JPG http://www.getaprop.com/content-product_info/product_id-8902/michigan_long_hub_propeller.html 14.50 RH 15 Solas New Saturn-3 Rubex Stainless Propeller fits 150-250 HP Suzuki Outboards... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 104 (Not Included) Interchangeable Hub System DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9054/solas_new_saturn_rubex_9531_145_15.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-9054/solas_new_saturn_rubex_9531_145_15.html 15.75 LH 15 Solas Lexor-3 Rubex Stainless Propeller fits 150-250 HP Suzuki Outboards... Interchangeable Hub System Thru Hub Exhaust 15 Tooth Spline Requires XHS 104 (Not Included) DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The Lexor-3 series is very suitable for high speed planing hulls. The Propeller delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9056/solas_lexor_rubex_9572_158_15.html http://www.getaprop.com/images/products/LH.JPG http://www.getaprop.com/content-product_info/product_id-9056/solas_lexor_rubex_9572_158_15.html 15.75 RH 15 Solas Lexor-3 Rubex Stainless Propeller fits 150-250 HP Suzuki Outboards... Interchangeable Hub System Thru Hub Exhaust 15 Tooth Spline Requires XHS 104 (Not Included) DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The Lexor-3 series is very suitable for high speed planing hulls. The Propeller delivers outstanding acceleration and notable bow lift. Extra cupping ensures handling performance. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9055/solas_lexor_rubex_9571_158_15.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-9055/solas_lexor_rubex_9571_158_15.html 13.50 RH 23 Mercury Vengeance Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-blade stainless steel design Stainless steel performance and value with increased efficiency, strength and durability over aluminum Precision handling and acceleration - better than most three-blade aluminum propellers http://www.getaprop.com/content-product_info/product_id-8492/vengeance_propeller_48_16320a46.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-8492/vengeance_propeller_48_16320a46.html 13.75 LH 21 Mercury Vengeance Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-blade stainless steel design Stainless steel performance and value with increased efficiency, strength and durability over aluminum Precision handling and acceleration - better than most three-blade aluminum propellers http://www.getaprop.com/content-product_info/product_id-8494/vengeance_propeller_48_16319a46.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-8494/vengeance_propeller_48_16319a46.html 14.00 LH 19 Mercury Vengeance Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-blade stainless steel design Stainless steel performance and value with increased efficiency, strength and durability over aluminum Precision handling and acceleration - better than most three-blade aluminum propellers http://www.getaprop.com/content-product_info/product_id-9014/vengeance_propeller_48_16317a46.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-9014/vengeance_propeller_48_16317a46.html 14.00 RH 19 Mercury Vengeance Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-blade stainless steel design Stainless steel performance and value with increased efficiency, strength and durability over aluminum Precision handling and acceleration - better than most three-blade aluminum propellers http://www.getaprop.com/content-product_info/product_id-9013/vengeance_propeller_48_16316a46.html http://www.getaprop.com/images/products/VENGENCE.JPG http://www.getaprop.com/content-product_info/product_id-9013/vengeance_propeller_48_16316a46.html 14.58 LH 19 Mercury Tempest Plus Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Three-blade stainless steel design Ventilated for increased acceleration and unparalleled speed for large and heavy loads Higher rake and bigger cup for better handling and lift Large 14-5/8" diameter for high engine height installations For big, V-6 outboard-powered bass, walleye, bay and sport boats http://www.getaprop.com/content-product_info/product_id-8487/tempest_plus_prop_48_825861a47.html http://www.getaprop.com/images/products/TEMPESTP.jpg http://www.getaprop.com/content-product_info/product_id-8487/tempest_plus_prop_48_825861a47.html 14.25 LH 21 Stiletto Advantage II Stainless Propeller fits Mercury Outboards & Alpha & Bravo 1 Sterndrives with 150hp or higher. Rubber Hub Bushing included. The ADVANTAGE II Stainless Steel Boat Propeller Series is designed for the 150 horsepower and greater outboards and most sterndrive applications. This series gives you the advantage when skiing, carrying loads and in adverse water conditions. This is the choice for all around performance... Stiletto props are made in the USA. http://www.getaprop.com/content-product_info/product_id-8910/stiletto_propeller_10221_lh.html http://www.getaprop.com/images/products/STILETTO.JPG http://www.getaprop.com/content-product_info/product_id-8910/stiletto_propeller_10221_lh.html 14.50 RH 15 Solas New Saturn Rubex Stainless Propeller Fits 135-300 Mercury Outboards & Alpha/Bravo-1 Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer & Alpha/Bravo-1 Sterndrives When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9048/solas_new_saturn_rubex_9531_145_15.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-9048/solas_new_saturn_rubex_9531_145_15.html 15.75 LH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 135-300 Mercury Outboards & Alpha/Bravo-1 Sterndrives... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer & Alpha/Bravo-1 Sterndrives Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9050/solas_lexor_rubex_9572_158_15.html http://www.getaprop.com/images/products/LH.JPG http://www.getaprop.com/content-product_info/product_id-9050/solas_lexor_rubex_9572_158_15.html 15.75 RH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 135-300 Mercury Outboards & Alpha/Bravo-1 Sterndrives... Interchangeable Hub System Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer & Alpha/Bravo-1 Sterndrives Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9049/solas_lexor_rubex_9571_158_15.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-9049/solas_lexor_rubex_9571_158_15.html 14.58 LH 23 Mercury Revolution 4 Blade Stainless Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Strong acceleration with improved mid-range and top speed. If your RPM is at or above the top rated range with a 3-blade prop, use a Revolution 4 with the same pitch. are at the mid to low end of the RPM range with a 3-blade prop, use a Revolution 4 of the next lower pitch. http://www.getaprop.com/content-product_info/product_id-8529/revolution_4_prop_48_857031a46.html http://www.getaprop.com/images/products/mer333.JPG http://www.getaprop.com/content-product_info/product_id-8529/revolution_4_prop_48_857031a46.html 14.00 LH 23 Mercury Offshore-4 Blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Four-blade stainless steel design Delivers tough, durable performance Provides better acceleration, aggressive holding and tremendous bow lift http://www.getaprop.com/content-product_info/product_id-8869/offshore_propeller_48_825907a48.html http://www.getaprop.com/images/products/OFF.jpg http://www.getaprop.com/content-product_info/product_id-8869/offshore_propeller_48_825907a48.html 14.00 LH 21 Mercury Offshore-4 Blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Four-blade stainless steel design Delivers tough, durable performance Provides better acceleration, aggressive holding and tremendous bow lift http://www.getaprop.com/content-product_info/product_id-8870/offshore_propeller_48_825903a48.html http://www.getaprop.com/images/products/OFF.jpg http://www.getaprop.com/content-product_info/product_id-8870/offshore_propeller_48_825903a48.html 14.00 RH 21 Mercury Offshore-4 Blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Four-blade stainless steel design Delivers tough, durable performance Provides better acceleration, aggressive holding and tremendous bow lift http://www.getaprop.com/content-product_info/product_id-8868/offshore_propeller_48_825902a48.html http://www.getaprop.com/images/products/OFF.jpg http://www.getaprop.com/content-product_info/product_id-8868/offshore_propeller_48_825902a48.html 14.50 RH 29 Mercury Mirage 3 blade Stainless Propeller Fits 135-300hp Outboard Motors... SOLID HUB PROPELLER Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8535/mercury_mirage_prop_48_821720a50.html http://www.getaprop.com/images/products/MMIR.jpg http://www.getaprop.com/content-product_info/product_id-8535/mercury_mirage_prop_48_821720a50.html 14.00 RH 27 Mercury Mirage 3 blade Stainless Propeller Fits 135-300hp Outboard Motors... SOLID HUB PROPELLER Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8506/mercury_mirage_prop_48_19836a50.html http://www.getaprop.com/images/products/MMIR.jpg http://www.getaprop.com/content-product_info/product_id-8506/mercury_mirage_prop_48_19836a50.html 15.50 LH 17 Mercury Mirage Plus-3 blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8522/mercury_mirage_plus_48_90159a46.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-8522/mercury_mirage_plus_48_90159a46.html 15.50 LH 17 Mercury Mirage Plus 3 blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8510/mercury_mirage_plus_48_90159a46.html http://www.getaprop.com/images/products/MMIR.jpg http://www.getaprop.com/content-product_info/product_id-8510/mercury_mirage_plus_48_90159a46.html 14.38 LH 27 Mercury Mirage Plus-3 blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8516/mercury_mirage_plus_48_18281a46.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-8516/mercury_mirage_plus_48_18281a46.html 15.25 LH 19 Mercury Mirage Plus-3 blade Stainless Propeller Fits 135-300hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8520/mercury_mirage_plus_48_13701a46.html http://www.getaprop.com/images/products/merageplus.JPG http://www.getaprop.com/content-product_info/product_id-8520/mercury_mirage_plus_48_13701a46.html 14.50 RH 25 Mercury Mirage Plus 3 blade Stainless Propeller Fits 135-300hp Outboard Motors... SOLID HUB PROPELLER Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer Specifically designed to handle high horsepower Moves larger boats with less effort with patented high-output blades... Dramatically improves acceleration and top speed Strong acceleration with improved mid-range and top speed. http://www.getaprop.com/content-product_info/product_id-8507/mercury_mirage_plus_48_13248a50.html http://www.getaprop.com/images/products/MMIR.jpg http://www.getaprop.com/content-product_info/product_id-8507/mercury_mirage_plus_48_13248a50.html 13.75 LH 23 Mercury Laser II Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8426/laser_two_prop_lh_48_16547a46.html http://www.getaprop.com/images/products/ML2.jpg http://www.getaprop.com/content-product_info/product_id-8426/laser_two_prop_lh_48_16547a46.html 13.78 LH 21 Mercury Laser II Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8427/laser_two_prop_lh_48_16545a46.html http://www.getaprop.com/images/products/ML2.jpg http://www.getaprop.com/content-product_info/product_id-8427/laser_two_prop_lh_48_16545a46.html 14.25 LH 19 Mercury Laser II Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8428/laser_two_prop_lh_48_16543a40.html http://www.getaprop.com/images/products/ML2.jpg http://www.getaprop.com/content-product_info/product_id-8428/laser_two_prop_lh_48_16543a40.html 13.50 RH 26 Mercury Laser II Propeller Fits 40-140hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-8418/laser_two_3_4_cyl_48_16996a40.html http://www.getaprop.com/images/products/ML2.jpg http://www.getaprop.com/content-product_info/product_id-8418/laser_two_3_4_cyl_48_16996a40.html 13.00 RH 22 Mercury High Five Stainless Steel Propeller Fits 40-140hp Outboard Motors... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 Five-blade stainless steel design Ultimate in hole shot for effortlessly pulling skiers or hauling to your favorite fishing hole Pulls strong and smooth and offers great bow lift and handling, even in rough water http://www.getaprop.com/content-product_info/product_id-8860/high_five_3_4_cyl_48_815744a46.html http://www.getaprop.com/images/products/high five.JPG http://www.getaprop.com/content-product_info/product_id-8860/high_five_3_4_cyl_48_815744a46.html 18.25 RH 22 Mercury Bravo Two Stainless Propeller... Stainless 3 blade propellers are designed for maximum speed and performance. Super soft forward and reverse engagement Factory installed rubber hub system is included with your propeller. http://www.getaprop.com/content-product_info/product_id-8604/bravo_two_propeller_ss_48_897550a6.html http://www.getaprop.com/images/products/mb2ss.JPG http://www.getaprop.com/content-product_info/product_id-8604/bravo_two_propeller_ss_48_897550a6.html 17.25 RH 25 Mercury Bravo Two Stainless Propeller... Stainless 3 blade propellers are designed for maximum speed and performance. Super soft forward and reverse engagement Factory installed rubber hub system is included with your propeller. http://www.getaprop.com/content-product_info/product_id-8603/bravo_two_propeller_ss_48_18620a6.html http://www.getaprop.com/images/products/mb2ss.JPG http://www.getaprop.com/content-product_info/product_id-8603/bravo_two_propeller_ss_48_18620a6.html 13.75 RH 28 (Rear) Mercury Bravo Three Propeller... Mercury's Bravo Three propeller offers unbelievable control and handling in a twin prop. With its large-diameter forward propeller and small-diameter aft propeller, the Bravo Three generates high-trust production and improved operating efficiencyall while running smooth at both high and low end speeds. http://www.getaprop.com/content-product_info/product_id-8370/bravo_three_rear_48_823670a60.html http://www.getaprop.com/images/products/b3r.jpg http://www.getaprop.com/content-product_info/product_id-8370/bravo_three_rear_48_823670a60.html 14.25 LH 30 (Front) Mercury Bravo Three Propeller... Mercury's Bravo Three propeller offers unbelievable control and handling in a twin prop. With its large-diameter forward propeller and small-diameter aft propeller, the Bravo Three generates high-trust production and improved operating efficiencyall while running smooth at both high and low end speeds. http://www.getaprop.com/content-product_info/product_id-8369/bravo_three_front_48_831867a60.html http://www.getaprop.com/images/products/b3fr.jpg http://www.getaprop.com/content-product_info/product_id-8369/bravo_three_front_48_831867a60.html 15.25 LH 24 Mercury Bravo I Stainless Propeller fits Alpha & Bravo 1 Sterndrives with 150hp or higher. XHS Hub Kit 102 Required for installation. Adding increased speed, better acceleration and improved top end performance to a high performance, huge horsepower boat can be accomplished by adding a Bravo 1 propeller. With its massive area and no holds barred blade geometry, the Bravo 1 excels at elevated drive heights with big horsepower. This four blade stainless steel propeller is setting the pace too fast for any others to follow. http://www.getaprop.com/content-product_info/product_id-8437/bravo_one_propeller_48_831911a45.html http://www.getaprop.com/images/products/brv01.JPG http://www.getaprop.com/content-product_info/product_id-8437/bravo_one_propeller_48_831911a45.html 15.25 LH 22 Mercury Bravo I Stainless Propeller fits Alpha & Bravo 1 Sterndrives with 150hp or higher. XHS Hub Kit 102 Required for installation. Adding increased speed, better acceleration and improved top end performance to a high performance, huge horsepower boat can be accomplished by adding a Bravo 1 propeller. With its massive area and no holds barred blade geometry, the Bravo 1 excels at elevated drive heights with big horsepower. This four blade stainless steel propeller is setting the pace too fast for any others to follow. http://www.getaprop.com/content-product_info/product_id-8439/bravo_one_propeller_48_831909a45.html http://www.getaprop.com/images/products/brv01.JPG http://www.getaprop.com/content-product_info/product_id-8439/bravo_one_propeller_48_831909a45.html 13.00 RH 19 Quicksilver Aluminum Propeller. Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9032/quicksilver_aluminum_propeller_qa2038.html http://www.getaprop.com/images/products/kugk.jpg http://www.getaprop.com/content-product_info/product_id-9032/quicksilver_aluminum_propeller_qa2038.html 13.75 RH 17 Quicksilver Aluminum Propeller. Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-9031/quicksilver_aluminum_propeller_qa2036.html http://www.getaprop.com/images/products/kugk.jpg http://www.getaprop.com/content-product_info/product_id-9031/quicksilver_aluminum_propeller_qa2036.html 15.00 RH 17 Quicksilver Black Diamond 3 Blade Aluminum Propeller Fits Mercury Outboards 135-300hp & Mercruiser Alpha & Bravo 1 Drives... Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline http://www.getaprop.com/content-product_info/product_id-9034/quicksilver_aluminum_propeller_qa1912.html http://www.getaprop.com/images/products/kugk.jpg http://www.getaprop.com/content-product_info/product_id-9034/quicksilver_aluminum_propeller_qa1912.html 14.00 X 19 Michigan Match Aluminum Propeller. Rubber Hub Bushing Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9030/michigan_match_propeller_031025.html http://www.getaprop.com/images/products/jgu.jpg http://www.getaprop.com/content-product_info/product_id-9030/michigan_match_propeller_031025.html 18.75 LH 19 Power Tech Bravo Two Aluminum Propeller... All propellers are 3 blade for maximum speed and performance. Super soft forward and reverse engagement Factory installed rubber hub system is included with the propeller. http://www.getaprop.com/content-product_info/product_id-9018/bravo_2_propeller_power_tech.html http://www.getaprop.com/images/products/LYF.jpg http://www.getaprop.com/content-product_info/product_id-9018/bravo_2_propeller_power_tech.html 17.75 LH 17 Mercury Bravo Two Aluminum Propeller... Bravo-2 Propellers are 3 blade for maximum speed and performance. Super soft forward and reverse engagement. Factory installed rubber hub system is included with the propeller. http://www.getaprop.com/content-product_info/product_id-8354/bravo_2_propeller_48_18613a42.html http://www.getaprop.com/images/products/b2lh.jpg http://www.getaprop.com/content-product_info/product_id-8354/bravo_2_propeller_48_18613a42.html 15.00 RH 16 Mercury Alpha-4 Propeller... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8384/alpha_4_propeller_48_834850a45.html http://www.getaprop.com/images/products/ma4.jpg http://www.getaprop.com/content-product_info/product_id-8384/alpha_4_propeller_48_834850a45.html 14.5 RH 15 Honda Marine Stainless Propeller Fits 135-225 HP Honda Outboards... Rubber Hub Insert Thru Hub Exhaust & 15 Tooth Spline. Mfg. from Solas Type New Saturn with Honda Logo on Hub. 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer When looking for a durable and better efficiency propeller to replace your aluminum propeller, the New Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for mid-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8900/honda_stainless_propeller_s1531_145_15.html http://www.getaprop.com/images/products/hon.jpg http://www.getaprop.com/content-product_info/product_id-8900/honda_stainless_propeller_s1531_145_15.html 15.5 LH 17 Honda Marine Stainless Propeller Fits 135-225 HP Honda Outboards... Rubber Hub Insert Thru Hub Exhaust & 15 Tooth Spline. Mfg. from Solas Type Lexor with Honda Logo on Hub 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2002 and Newer 225 HP 2002 and Newer Luxor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-8901/honda_stainless_propeller_s1572_155_17.html http://www.getaprop.com/images/products/hon.jpg http://www.getaprop.com/content-product_info/product_id-8901/honda_stainless_propeller_s1572_155_17.html 14.25 LH 21 Stiletto ADVANTAGE II Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards and Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 http://www.getaprop.com/content-product_info/product_id-8560/stiletto_stainless_propeller_20221.html http://www.getaprop.com/images/products/STIL1.jpg http://www.getaprop.com/content-product_info/product_id-8560/stiletto_stainless_propeller_20221.html 14.25 LH 19 Stiletto ADVANTAGE II Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards and Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 http://www.getaprop.com/content-product_info/product_id-8559/stiletto_stainless_propeller_20219.html http://www.getaprop.com/images/products/STIL1.jpg http://www.getaprop.com/content-product_info/product_id-8559/stiletto_stainless_propeller_20219.html 14.50 RH 15 Solas New Saturn Rubex Stainless Propeller Fits 90-300HP Evinrude/Johnson Outboards & OMC Cobra 800 Sterndrives... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 200,225,250HP ETEC 2005 and Newer & OMC Cobra 800 Sterndrives Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older When looking for a durable and better efficiency propeller to replace your aluminum propeller, the Saturn series propeller is an ideal choice. Also with its moderate blade area design, this series is very suitable for under-powered boats. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9045/solas_new_saturn_rubex_9531_145_15.html http://www.getaprop.com/images/products/SNSRUBEX1.JPG http://www.getaprop.com/content-product_info/product_id-9045/solas_new_saturn_rubex_9531_145_15.html 15.75 LH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 90-300HP Evinrude/Johnson Outboards & OMC Cobra 800 Sterndrives... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 200,225,250HP ETEC 2005 and Newer & OMC Cobra 800 Sterndrives Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9047/solas_lexor_rubex_9572_158_15.html http://www.getaprop.com/images/products/LH.JPG http://www.getaprop.com/content-product_info/product_id-9047/solas_lexor_rubex_9572_158_15.html 15.75 RH 15 Solas Lexor-3 Rubex Stainless Propeller Fits 90-300HP Evinrude/Johnson Outboards & OMC Cobra 800 Sterndrives... Interchangeable Hub System Thru Hub Exhaust & 15 Tooth Spline. V-6 Gearcase 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 200,225,250HP ETEC 2005 and Newer & OMC Cobra 800 Sterndrives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older Lexor propeller is designed with a high camber blade section and large blade area to provide better load carrying and fuel efficiency for the high power marine engine. The new generation of the SOLAS S/S propeller is made with ultra durable material. Unlike the traditional material, the new material is a true Stainless Steel. It will never RUST and is also very difficult to be worn out. SOLAS offers variety propeller series to meet different requirements. http://www.getaprop.com/content-product_info/product_id-9046/solas_lexor_rubex_9571_158_15.html http://www.getaprop.com/images/products/newsl3rbx.JPG http://www.getaprop.com/content-product_info/product_id-9046/solas_lexor_rubex_9571_158_15.html 14.25 LH 19 OMC Black Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards & Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase V-6/V-8 OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-9024/omc_sst_black_stainless_390820.html http://www.getaprop.com/images/products/LH1.JPG http://www.getaprop.com/content-product_info/product_id-9024/omc_sst_black_stainless_390820.html 14.25 RH 23 OMC Black Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards & Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase V-6/V-8 OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-9022/omc_sst_black_stainless_389019.html http://www.getaprop.com/images/products/jfjf copy.jpg http://www.getaprop.com/content-product_info/product_id-9022/omc_sst_black_stainless_389019.html 15.25 LH 19 OMC Rebel Stainless Propeller fits 90-300 HP Evinrude Johnson Outboards & Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase V-6/V-8 OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-8572/omc_propeller_e_j_rebel_763571.html http://www.getaprop.com/images/products/rebel.jpg http://www.getaprop.com/content-product_info/product_id-8572/omc_propeller_e_j_rebel_763571.html 15.00 RH 17 OMC Aluminum Propeller fits 90-300 HP Evinrude Johnson Outboards & Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase V-6/V-8 OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-9025/omc_aluminum_propeller_391200.html http://www.getaprop.com/images/products/jfjfj copy.jpg http://www.getaprop.com/content-product_info/product_id-9025/omc_aluminum_propeller_391200.html 14.50 RH 19 OMC Aluminum Propeller fits 90-300 HP Evinrude Johnson Outboards & Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase V-6/V-8 OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-9017/omc_aluminum_propeller_387161.html http://www.getaprop.com/images/products/jfjfj copy.jpg http://www.getaprop.com/content-product_info/product_id-9017/omc_aluminum_propeller_387161.html 11.50 RH 19 OMC Propeller fits 40-75 HP Evinrude Johnson Outboards... Small Gearcase, 13 Tooth Spline Thru Hub Exhaust, 2 Stroke 40 HP 2 Cyl. 1984 Thru 48 HP 87-96 50 HP 2 Cyl. 1974 Thru 55 HP 76-79 60 HP 2 Cyl. 80-85 75 HP 3 Cyl. 75-85 Sprint 86-92 Formula E 86-92 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-9044/omc_aluminum_propeller_386908.html http://www.getaprop.com/images/products/ej copy.jpg http://www.getaprop.com/content-product_info/product_id-9044/omc_aluminum_propeller_386908.html 15.50 RH 15 OMC Aluminum Propeller fits 90-300 HP Evinrude Johnson Outboards & Sterndrives... Thru Hub Exhaust & 15 Tooth Spline. 4 3/4 Gearcase V-6/V-8 OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 <iframe src="http://player.vimeo.com/video/5934808" width="400" height="400" frameborder="0"></iframe><p><a href="http://vimeo.com/5934808">Bendy Propeller</a> from <a href="http://vimeo.com/stevetalkowski">Steve Talkowski</a> on <a href="http://vimeo.com">Vimeo</a>.</p> http://www.getaprop.com/content-product_info/product_id-9019/omc_aluminum_propeller_177142.html http://www.getaprop.com/images/products/jfjfj copy.jpg http://www.getaprop.com/content-product_info/product_id-9019/omc_aluminum_propeller_177142.html 18.25 LH 15 Mercury Bravo Two Aluminum Propeller... Bravo-2 Propellers are 3 blade for maximum speed and performance. Super soft forward and reverse engagement Factory installed rubber hub system is included with the propeller. http://www.getaprop.com/content-product_info/product_id-9035/bravo_2_propeller_48_18611a42.html http://www.getaprop.com/images/products/KFKU.jpg http://www.getaprop.com/content-product_info/product_id-9035/bravo_2_propeller_48_18611a42.html 14.00 X 19 Mercury Black Max Propeller. Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-9015/black_max_propeller_48_832830a45.html http://www.getaprop.com/images/products/mbm.jpg http://www.getaprop.com/content-product_info/product_id-9015/black_max_propeller_48_832830a45.html 18.25 RH 15 Mercury Bravo Two Aluminum Propeller... Bravo-2 Propellers are 3 blade for maximum speed and performance. Super soft forward and reverse engagement Factory installed rubber hub system is included with the propeller. http://www.getaprop.com/content-product_info/product_id-9028/bravo_2_propeller_48_18610a42.html http://www.getaprop.com/images/products/b21.jpg http://www.getaprop.com/content-product_info/product_id-9028/bravo_2_propeller_48_18610a42.html 14 X 19 Mercury Black Max Propeller Fits 135-275 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer All-purpose 3-blade aluminum propeller Inexpensive and easy to repair Recommended for speeds less than 50 MPH and applications less than 250 HP http://www.getaprop.com/content-product_info/product_id-9012/black_max_propeller_48_78120a45.html http://www.getaprop.com/images/products/mbm.jpg http://www.getaprop.com/content-product_info/product_id-9012/black_max_propeller_48_78120a45.html 225mm ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Requires Bushing Kit 17mm to 14mm (Bolt Holes) Flange Diameter:225mm # Of Bolts:8 Bolt Diameter:14mm Bolt Circle:196mm Pilot Diameter:140mm Coupling Diameter:9 1/8" http://www.getaprop.com/content-product_info/product_id-1440/drivesaver_8858zb.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1440/drivesaver_8858zb.html 8 1/16" ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 8 1/16" # Of Bolts:8 Bolt Diameter:5/8" Bolt Circle:6 11/16" Pilot Diameter:5 1/2" Coupling Diameter:8 1/16" http://www.getaprop.com/content-product_info/product_id-1438/drivesaver_8078z.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1438/drivesaver_8078z.html 7 1/4" ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 7 1/4" # Of Bolts:6 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:7 1/4" http://www.getaprop.com/content-product_info/product_id-1436/drivesaver_7306z.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-1436/drivesaver_7306z.html 7 1/4" ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 7 1/4" # Of Bolts:8 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:7 1/4" http://www.getaprop.com/content-product_info/product_id-1437/drivesaver_7258z.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1437/drivesaver_7258z.html 5 3/4" ZF ... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 3/8" http://www.getaprop.com/content-product_info/product_id-7996/drivesaver_5756a.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7996/drivesaver_5756a.html 5" ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/4" Pilot Diameter:2 1/2" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-8003/drivesaver_504.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8003/drivesaver_504.html 4 3/4" ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4 3/4" # Of Bolts:6 Bolt Diameter:7/16" Bolt Circle:3 7/8" Pilot Diameter:2 1/2" Coupling Diameter: 5 3/8" http://www.getaprop.com/content-product_info/product_id-8006/drivesaver_4756.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8006/drivesaver_4756.html 10 1/2" ZF... Bushing Kit Required 1" to 3/4" (Bolt Holes) Flange Diameter:10 1/2" # Of Bolts:8 Bolt Diameter:3/4" Bolt Circle:8 3/4" Pilot Diameter:5" Coupling Diameter:12 1/2" The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. http://www.getaprop.com/content-product_info/product_id-8008/drivesaver_1058b.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-8008/drivesaver_1058b.html 5 3/4" Yanmar... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Bushing Kit Required 5/8" to 1/2" (Bolt Holes) Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 13/16" http://www.getaprop.com/content-product_info/product_id-8010/drivesaver_5756b.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-8010/drivesaver_5756b.html 4.724" Yanmar... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4.724" # Of Bolts:4 Bolt Diameter:10mm Bolt Circle:100mm Pilot Diameter:65mm Coupling Diameter:5 1/4" http://www.getaprop.com/content-product_info/product_id-1430/drivesaver_524y.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1430/drivesaver_524y.html 3.937" Yanmar... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 3.937" # Of Bolts:4 Bolt Diameter:10mm Bolt Circle:78mm Pilot Diameter:50mm Coupling Diameter: 4 1/4" http://www.getaprop.com/content-product_info/product_id-1423/drivesaver_424y.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1423/drivesaver_424y.html 5" Volvo... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/4" Pilot Diameter:2 1/2" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-8001/drivesaver_504.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8001/drivesaver_504.html 4" Volvo... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4" # Of Bolts:4 Bolt Diameter:10mm Bolt Circle:8cm Pilot Diameter:6cm Coupling Diameter: 5" http://www.getaprop.com/content-product_info/product_id-1421/drivesaver_404v.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1421/drivesaver_404v.html 3" Universal Atomic-4... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 3-1/2" # Of Bolts:3 Bolt Diameter:3/8" Bolt Circle:2 3/4" Pilot Diameter:1 7/8" Coupling Diameter: 4 5/16" http://www.getaprop.com/content-product_info/product_id-1414/drivesaver_353.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_3[1].jpg http://www.getaprop.com/content-product_info/product_id-1414/drivesaver_353.html 9" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Requires Bushing Kit 3/4" to 5/8" Flange Diameter:9" # Of Bolts:8 Bolt Diameter:5/8" Bolt Circle:7 1/2" Pilot Diameter:6" Coupling Diameter:9 1/8" http://www.getaprop.com/content-product_info/product_id-1443/drivesaver_908sb.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1443/drivesaver_908sb.html 7 1/4" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Requires Bushing Kit 3/4" to 5/8" (Bolt Holes) Flange Diameter: 7 1/4" # Of Bolts:6 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:8 3/8" http://www.getaprop.com/content-product_info/product_id-7993/drivesaver_7256b.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7993/drivesaver_7256b.html 5 3/4" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Requires Bushing Kit 5/8" to 1/2" (Bolt Holes) Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 13/16" http://www.getaprop.com/content-product_info/product_id-8007/drivesaver_5756b.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-8007/drivesaver_5756b.html 4 3/4" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4 3/4" # Of Bolts:6 Bolt Diameter:7/16" Bolt Circle:3 7/8" Pilot Diameter:2 1/2" Coupling Diameter: 5 3/8" http://www.getaprop.com/content-product_info/product_id-8005/drivesaver_4756.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8005/drivesaver_4756.html 11" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter:11" # Of Bolts:8 Bolt Diameter:3/4" Bolt Circle:9 Pilot Diameter:6" Coupling Diameter:11 3/4" http://www.getaprop.com/content-product_info/product_id-1447/drivesaver_1108a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1447/drivesaver_1108a.html 11" Twin Disc... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter:11" # Of Bolts:8 Bolt Diameter:3/4" Bolt Circle:9 1/2" Pilot Diameter:6" Coupling Diameter:13 1/4" http://www.getaprop.com/content-product_info/product_id-1446/drivesaver_1108.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1446/drivesaver_1108.html 6 1/4" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 6 1/4" # Of Bolts:6 Bolt Diameter:7/16 Bolt Circle:5 3/8" Pilot Diameter:3 1/4" Coupling Diameter:7 1/4" http://www.getaprop.com/content-product_info/product_id-1434/drivesaver_6256.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-1434/drivesaver_6256.html 5 1/2" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 1/2" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:4 5/8" Pilot Diameter:3 1/8" Coupling Diameter:6 1/2" http://www.getaprop.com/content-product_info/product_id-1431/drivesaver_554.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1431/drivesaver_554.html 5" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/8" Pilot Diameter:2 7/8" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-1428/drivesaver_504ac.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1428/drivesaver_504ac.html 5" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:4 1/8" Pilot Diameter:2 3/4" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-1427/drivesaver_504a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1427/drivesaver_504a.html 4 1/2" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4 1/2" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:3 3/4" Pilot Diameter:2 5/8" Coupling Diameter: 5 3/8" http://www.getaprop.com/content-product_info/product_id-1424/drivesaver_454.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1424/drivesaver_454.html 4" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:3 1/4" Pilot Diameter:2 5/8" Coupling Diameter: 5" http://www.getaprop.com/content-product_info/product_id-1420/drivesaver_404ac.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1420/drivesaver_404ac.html 4" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:3 1/4" Pilot Diameter:2" Coupling Diameter: 5" http://www.getaprop.com/content-product_info/product_id-1418/drivesaver_404.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1418/drivesaver_404.html 3" Paragon... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 3" # Of Bolts:3 Bolt Diameter:3/8" Bolt Circle:2 1/2" Pilot Diameter:1 3/4" Coupling Diameter: 4" http://www.getaprop.com/content-product_info/product_id-1389/drivesaver_303.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_3[1].jpg http://www.getaprop.com/content-product_info/product_id-1389/drivesaver_303.html 7 1/4" Newage PRM... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 7 1/4" # Of Bolts:6 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:8 3/8" http://www.getaprop.com/content-product_info/product_id-7992/drivesaver_7256.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7992/drivesaver_7256.html 5 3/4" Newage PRM... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 13/16" http://www.getaprop.com/content-product_info/product_id-7998/drivesaver_5756.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7998/drivesaver_5756.html 5" Newage PRM... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/4" Pilot Diameter:2 1/2" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-8000/drivesaver_504.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8000/drivesaver_504.html 4" Newage PRM... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:3 1/4" Pilot Diameter:2 1/2" Coupling Diameter:5" http://www.getaprop.com/content-product_info/product_id-7999/drivesaver_404a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-7999/drivesaver_404a.html 7 1/4" Hurth/ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 7 1/4" # Of Bolts:6 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:8 3/8" http://www.getaprop.com/content-product_info/product_id-7991/drivesaver_7256.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7991/drivesaver_7256.html 5 3/4" Hurth/ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 13/16" http://www.getaprop.com/content-product_info/product_id-7997/drivesaver_5756.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7997/drivesaver_5756.html 5" Hurth/ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/4" Pilot Diameter:2 1/2" Coupling Diameter:5 1/8" http://www.getaprop.com/content-product_info/product_id-1429/drivesaver_504h.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1429/drivesaver_504h.html 5" Hurth/ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/4" Pilot Diameter:2 1/2" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-1426/drivesaver_504.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1426/drivesaver_504.html 4" Hurth/ZF... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:3 1/4" Pilot Diameter:2 1/2" Coupling Diameter:5" http://www.getaprop.com/content-product_info/product_id-1419/drivesaver_404a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1419/drivesaver_404a.html 7 1/4" Capitol... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 7 1/4" # Of Bolts:6 Bolt Diameter:5/8" Bolt Circle:6" Pilot Diameter:3 3/4" Coupling Diameter:8 3/8" http://www.getaprop.com/content-product_info/product_id-7990/drivesaver_7256.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-7990/drivesaver_7256.html 5 3/4" Capitol... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 3/8" http://www.getaprop.com/content-product_info/product_id-1433/drivesaver_5756a.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-1433/drivesaver_5756a.html 5 3/4" Capitol... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 13/16" http://www.getaprop.com/content-product_info/product_id-1432/drivesaver_5756.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-1432/drivesaver_5756.html 4 3/4" Capitol... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4 3/4" # Of Bolts:6 Bolt Diameter:7/16" Bolt Circle:3 7/8" Pilot Diameter:2 1/2" Coupling Diameter: 5 3/8" http://www.getaprop.com/content-product_info/product_id-1425/drivesaver_4756.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-1425/drivesaver_4756.html 4" Borg Warner... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 4" # Of Bolts:4 Bolt Diameter:3/8" Bolt Circle:3 1/4" Pilot Diameter:2 1/2" Coupling Diameter:5" http://www.getaprop.com/content-product_info/product_id-8004/drivesaver_404a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8004/drivesaver_404a.html 5" Borg Warner... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5" # Of Bolts:4 Bolt Diameter:7/16" Bolt Circle:4 1/4" Pilot Diameter:2 1/2" Coupling Diameter: 6" http://www.getaprop.com/content-product_info/product_id-8002/drivesaver_504.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_2[1].jpg http://www.getaprop.com/content-product_info/product_id-8002/drivesaver_504.html 5 3/4" Borg Warner... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter: 5 3/4" # Of Bolts:6 Bolt Diameter:1/2" Bolt Circle:4 3/4" Pilot Diameter:3" Coupling Diameter:6 13/16" http://www.getaprop.com/content-product_info/product_id-8009/drivesaver_5756.html http://www.getaprop.com/images/products/Blue_Drivesaver_2_low_res[1].jpg http://www.getaprop.com/content-product_info/product_id-8009/drivesaver_5756.html 12" Bronze 2 Blade Michigan Sailor Propeller... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6852/michigan_sailor_propeller_12_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6852/michigan_sailor_propeller_12_dia.html 4" Volvo... The R & D Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads. Capacity: HP/RPM=3 (HP x GearRatio x 100/Max Rated RPM) Flange Diameter:4" # Holes:4 Hole Diameter:0.39" Bolt Circle:3.15" Pilot Diameter:2.36" http://www.getaprop.com/content-product_info/product_id-2025/r_d_flex_coupling_910_007.html http://www.getaprop.com/images/products/flexshaftcoupling[1].jpg http://www.getaprop.com/content-product_info/product_id-2025/r_d_flex_coupling_910_007.html 9" Allison... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Bushing Kit Required 3/4" to 5/8" (Bolt Holes) Flange Diameter:9" # Of Bolts:8 Bolt Diameter:5/8" Bolt Circle:7 1/2" Pilot Diameter:6" Coupling Diameter:11" http://www.getaprop.com/content-product_info/product_id-7994/drivesaver_908.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-7994/drivesaver_908.html 9" Allison... The DRIVESAVER effectively absorbs thrust and torque from the propeller shaft, as well as excessive shock from changing gears and high speed planing. It also helps control damage and misalignment from torsional engine movement. And, the DRIVESAVER keeps on working, under normal conditions, for the life of the drivetrain, without any lubrication or maintenance. Flange Diameter:9" # Of Bolts:8 Bolt Diameter:5/8" Bolt Circle:7 3/4" Pilot Diameter:5 1/8" Coupling Diameter:11" http://www.getaprop.com/content-product_info/product_id-1442/drivesaver_908a.html http://www.getaprop.com/images/products/Red_Drivesaver_low_res_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1442/drivesaver_908a.html 802009Q1 ...Fits: Model 800, King Cobra, Cobra 1978-90 & 1991-1994. Thru hub exhaust 15 tooth spline. Comes with: OMC complete propeller hardware kit, Nut Spacer Thrust Washer Propeller Nut Assembly Always use marine grease when installing a propeller http://www.getaprop.com/content-product_info/product_id-7101/omc_800_sterndrive_o_b_nut_hardware_kit.html http://www.getaprop.com/images/products/16840[1].jpg http://www.getaprop.com/content-product_info/product_id-7101/omc_800_sterndrive_o_b_nut_hardware_kit.html 52707Q1...For use on Mercury/Mariner 75-300HP O/B & Mercruiser Alpha One and Bravo 1 drives all years. Force Outboards 90 through 120 HP Dual Exhaust 1995 and newer. Kit includes one tab washers & propeller nut. http://www.getaprop.com/content-product_info/product_id-6439/mercury_quicksilver_propeller_nut_kit.html http://www.getaprop.com/images/products/153467[3].jpg http://www.getaprop.com/content-product_info/product_id-6439/mercury_quicksilver_propeller_nut_kit.html 8hp thru 20hp Honda Outboard Prop Castle Nut. http://www.getaprop.com/content-product_info/product_id-8191/honda_prop_castle_nut_a.html http://www.getaprop.com/images/products/ycnt.JPG http://www.getaprop.com/content-product_info/product_id-8191/honda_prop_castle_nut_a.html 25hp thru 30hp Honda Outboard Prop Castle Nut. http://www.getaprop.com/content-product_info/product_id-8195/honda_prop_castle_nut_b.html http://www.getaprop.com/images/products/tbnt.JPG http://www.getaprop.com/content-product_info/product_id-8195/honda_prop_castle_nut_b.html 35hp thru 50hp Honda Outboard Propeller Nut. http://www.getaprop.com/content-product_info/product_id-8179/honda_prop_castle_nut_c.html http://www.getaprop.com/images/products/ydnt.JPG http://www.getaprop.com/content-product_info/product_id-8179/honda_prop_castle_nut_c.html 75hp thru 130hp Honda Outboard Nut Kit... Comes with 2 Tab Washers & 1 Nut. http://www.getaprop.com/content-product_info/product_id-8186/honda_prop_nut_kit_d.html http://www.getaprop.com/images/products/NUT KIT.JPG http://www.getaprop.com/content-product_info/product_id-8186/honda_prop_nut_kit_d.html 75hp thru 130hp Honda Outboard Nylock Nut. http://www.getaprop.com/content-product_info/product_id-8189/honda_prop_nylock_nut_d.html http://www.getaprop.com/images/products/mbnt.JPG http://www.getaprop.com/content-product_info/product_id-8189/honda_prop_nylock_nut_d.html 135hp thru 225hp Honda Outboard Nylock Nut. http://www.getaprop.com/content-product_info/product_id-8197/honda_prop_nylock_nut_e.html http://www.getaprop.com/images/products/mbnt.JPG http://www.getaprop.com/content-product_info/product_id-8197/honda_prop_nylock_nut_e.html 35hp thru 50hp Honda Outboard Propeller Spacer. http://www.getaprop.com/content-product_info/product_id-8181/honda_prop_spacer_c.html http://www.getaprop.com/images/products/YCSP11.JPG http://www.getaprop.com/content-product_info/product_id-8181/honda_prop_spacer_c.html 75hp thru 130hp Honda Outboard Tab Washer. http://www.getaprop.com/content-product_info/product_id-8187/honda_prop_tab_washer_d.html http://www.getaprop.com/images/products/18-3200[1].jpg http://www.getaprop.com/content-product_info/product_id-8187/honda_prop_tab_washer_d.html 135hp thru 225hp Honda Outboard Tab Washer. http://www.getaprop.com/content-product_info/product_id-8198/honda_prop_tab_washer_e.html http://www.getaprop.com/images/products/18-3200[1].jpg http://www.getaprop.com/content-product_info/product_id-8198/honda_prop_tab_washer_e.html 35hp thru 50hp Honda Outboard Propeller Washer. http://www.getaprop.com/content-product_info/product_id-8180/honda_prop_washer_c.html http://www.getaprop.com/images/products/ycws.JPG http://www.getaprop.com/content-product_info/product_id-8180/honda_prop_washer_c.html 135hp thru 225hp Honda Outboard Thrust Washer. http://www.getaprop.com/content-product_info/product_id-8200/honda_prop_thrust_washer_e.html http://www.getaprop.com/images/products/HETW.JPG http://www.getaprop.com/content-product_info/product_id-8200/honda_prop_thrust_washer_e.html 75hp thru 130hp Honda Outboard Thrust Washer. http://www.getaprop.com/content-product_info/product_id-8188/honda_prop_thrust_washer_d.html http://www.getaprop.com/images/products/metw.JPG http://www.getaprop.com/content-product_info/product_id-8188/honda_prop_thrust_washer_d.html 35hp thru 50hp Honda Outboard Propeller Thrust Washer. http://www.getaprop.com/content-product_info/product_id-8182/honda_prop_thrust_washer_c.html http://www.getaprop.com/images/products/yetw.JPG http://www.getaprop.com/content-product_info/product_id-8182/honda_prop_thrust_washer_c.html 25hp thru 30hp Honda Outboard Prop Thrust Washer. http://www.getaprop.com/content-product_info/product_id-8196/honda_prop_thrust_washer_b.html http://www.getaprop.com/images/products/TCTW.JPG http://www.getaprop.com/content-product_info/product_id-8196/honda_prop_thrust_washer_b.html 135hp thru 225hp Honda Outboard Spacer. http://www.getaprop.com/content-product_info/product_id-8199/honda_prop_spacer_e.html http://www.getaprop.com/images/products/hesp.JPG http://www.getaprop.com/content-product_info/product_id-8199/honda_prop_spacer_e.html 816629Q Mercury/Mariner Propeller Tab Washer... 2-Pack 40-60 hp Four Stroke (Bigfoot) 75-250 hp 2 Stroke. http://www.getaprop.com/content-product_info/product_id-3047/mercury_mariner_tab_washer.html http://www.getaprop.com/images/products/2pk.JPG http://www.getaprop.com/content-product_info/product_id-3047/mercury_mariner_tab_washer.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.Capacity: 2, 3, 4 and 5 blades, up to 28" propeller and 2" shaft http://www.getaprop.com/content-product_info/product_id-6414/walter_propeller_puller_2n.html http://www.getaprop.com/images/products/Pp2n[1].jpg http://www.getaprop.com/content-product_info/product_id-6414/walter_propeller_puller_2n.html A great time-saver. Protects the propeller, the shaft, and the bearings. Pulls 2, 3, and 4-blade props (10" to 24") quickly, without disturbing close coupled rudders. Requires only minimum clearance between the hub and strut or stern bearings. http://www.getaprop.com/content-product_info/product_id-6404/algonac_propeller_puller_a.html http://www.getaprop.com/images/products/photo_puller_2[1].gif http://www.getaprop.com/content-product_info/product_id-6404/algonac_propeller_puller_a.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propellerCapacity: 2, 3, 4 and 5 blades, up to 40" propeller and 3" shaft http://www.getaprop.com/content-product_info/product_id-1234/walter_propeller_puller_3n.html http://www.getaprop.com/images/products/Pp2n[1].jpg http://www.getaprop.com/content-product_info/product_id-1234/walter_propeller_puller_3n.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.Capacity: 2, 3, 4 and 5 blades, up to 28" propeller and 2" shaft http://www.getaprop.com/content-product_info/product_id-1233/walter_propeller_puller_2n.html http://www.getaprop.com/images/products/Pp2n[1].jpg http://www.getaprop.com/content-product_info/product_id-1233/walter_propeller_puller_2n.html Walter Safe-Way Propeller Pullers quickly and safely remove propellers; for more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.Capacity: 3 blades only, up to 20" propeller and 1-1/2" shaft http://www.getaprop.com/content-product_info/product_id-1231/walter_propeller_puller_1.html http://www.getaprop.com/images/products/Pp1[1].jpg http://www.getaprop.com/content-product_info/product_id-1231/walter_propeller_puller_1.html The Algonac Strut Bearing Puller eliminates the removal of the strut from the boat or the hard pounding or sawing of the old bearing. Just select the proper bushing and screw the old bearing out. Reverse the procedure and pull the new bearing into place. The puller is designed to remove and install strut bearings from 1 1/4" O.D. to 2" O.D. http://www.getaprop.com/content-product_info/product_id-7674/algonac_strut_bearing_puller.html http://www.getaprop.com/images/products/strtt.JPG http://www.getaprop.com/content-product_info/product_id-7674/algonac_strut_bearing_puller.html A great time-saver. Protects the propeller, the shaft, and the bearings. Pulls 2, 3, and 4-blade props (10" to 24") quickly, without disturbing close coupled rudders. Requires only minimum clearance between the hub and strut or stern bearings. http://www.getaprop.com/content-product_info/product_id-1229/algonac_propeller_puller_a.html http://www.getaprop.com/images/products/photo_puller_2[1].gif http://www.getaprop.com/content-product_info/product_id-1229/algonac_propeller_puller_a.html Volvo Penta Type "T" Duo-Prop Single Nibral Propeller for Volvo Penta IPS Drive... The Nibral (nickel-bronze-bronze alloy) propeller is developed to add to the revolutionary IPS propulsion system's outstanding performance. The design combined with a material that withstands corrosion, as well as minimizing growth, ensure optimum performance and outstanding maneuverability http://www.getaprop.com/content-product_info/product_id-7365/volvo_penta_dp_t_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7365/volvo_penta_dp_t_single_prop.html Volvo Penta Type "G" Duo-Prop Single Nibral Propeller for Volvo Penta DPH Drive... The combination of a 3-blade front and a 4-blade rear propeller, is the key to the tremendous grip in the water. The new generation DP propellers has been specially developed to handle the tremendous torque and power from the D4 and D6 engines. Performance is outstanding and the special nickel-bronze-bronze (Nibral) alloy complete with full electric isolation ensures no growth and excellent corrosion resistance. http://www.getaprop.com/content-product_info/product_id-7363/volvo_penta_dp_g_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7363/volvo_penta_dp_g_single_prop.html Volvo Penta Type "E" Duo-Prop Single Stainless Steel Propeller for Volvo Penta DPX Drive... The stainless steel DP-E propeller is specially developed to handle the high forces of the DPX high speed drive. Handling speeds up to 75 knots put high demands on the propellers performance. http://www.getaprop.com/content-product_info/product_id-7359/volvo_penta_dp_e_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7359/volvo_penta_dp_e_single_prop.html Volvo Penta Type "F" Duo-Prop Single Stainless Steel Propeller for Volvo Penta DPS... The stainless steel option for high performance gasoline and diesel engines with DPS drive. The material used gives the propeller blades greater torsional strength and is more resistant to cavitation damage. http://www.getaprop.com/content-product_info/product_id-7361/volvo_penta_dp_f_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7361/volvo_penta_dp_f_single_prop.html Volvo Penta Type "C" Duo-Prop Single Stainless Steel Propeller for Volvo Penta 280,290DP (Gasoline and Diesel) The Volvo Penta state-of-the-art stainless steel DP propeller has been specially designed to give maximum thrust where most needed. The high speed is achieved through thinner blades and powerful thrust. Greater torsional strength adds faster acceleration. The stainless steel material makes the propeller durable and highly resistant to cavitaion, damage and corrosion. All these factors contribute to excellent handing and comfort. http://www.getaprop.com/content-product_info/product_id-7341/volvo_penta_dp_c_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7341/volvo_penta_dp_c_single_prop.html Volvo PentaType "D" Duo-Prop Single Aluminum Propeller for Volvo Penta DPS... The aluminum propeller for all gasoline and diesel engines using the DPS drive, with speeds up to 35 knots. For all engines with speeds in excess of 35 knots, the stainless steel Type F propeller should be used. http://www.getaprop.com/content-product_info/product_id-7343/volvo_penta_dp_d_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7343/volvo_penta_dp_d_single_prop.html Volvo PentaType "B" Duo-Prop Single Aluminum Propeller for Volvo Penta 280DP -290DP Drives... For all engines with speeds in excess of 35 knots, the stainless steel Type C propeller should be used Aluminum DP propeller for gasoline and diesel engines. The two 3-blade propellers have very thin blade profiles, demanding the highest level of precision. http://www.getaprop.com/content-product_info/product_id-6754/volvo_penta_dp_b_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-6754/volvo_penta_dp_b_single_prop.html Volvo Penta Type "A" Duo-Prop Single Aluminum Propeller for Diesel 280DP -290DP Drives... For all engines with speeds in excess of 35 knots, the stainless steel Type C propeller should be used Aluminum DP propeller for gasoline and diesel engines. The two 3-blade propellers have very thin blade profiles, demanding the highest level of precision. http://www.getaprop.com/content-product_info/product_id-6751/volvo_penta_dp_a_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-6751/volvo_penta_dp_a_single_prop.html Quicksilver 24C 8oz.Propeller Shaft Spline Grease... A high quality multi-purpose lubricant designed to withstand extreme friction,and also providing water resistance... Recommended uses: steering systems, cable linkages, throttle and shift cables, remote controls, prop shafts, swivel pins a trailer wheel bearings. Extremely water resistant. Won't break down when mixed with water. Contains Teflon for added friction reduction and reduced wear. http://www.getaprop.com/content-product_info/product_id-7176/quicksilver_24c_propeller_spline_grease.html http://www.getaprop.com/images/products/qstef.JPG http://www.getaprop.com/content-product_info/product_id-7176/quicksilver_24c_propeller_spline_grease.html 3855516 Volvo Penta Duo-Prop DPR & DPS Tool Kit,D & F Series... To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-8775/volvo_penta_d_f_duo_prop_wrench.html http://www.getaprop.com/images/products/IMG_1587.JPG http://www.getaprop.com/content-product_info/product_id-8775/volvo_penta_d_f_duo_prop_wrench.html Volvo Penta Type "E" Duo-Prop Stainless Steel Propeller Set for Volvo Penta Set for Volvo Penta DPX Drive... (Gasoline and Diesel)... The stainless steel DP-E propeller is specially developed to handle the high forces of the DPX high speed drive. Handling speeds up to 75 knots put high demands on the propellers performance. http://www.getaprop.com/content-product_info/product_id-7358/volvo_penta_dp_e_set.html http://www.getaprop.com/images/products/DPE.jpg http://www.getaprop.com/content-product_info/product_id-7358/volvo_penta_dp_e_set.html Volvo Penta Type "F" Duo-Prop Stainless Steel Propeller Set for Volvo Penta DPS Drives... The stainless steel option for high performance gasoline and diesel engines with DPS drive. The material used gives the propeller blades greater torsional strength and is more resistant to cavitation damage. http://www.getaprop.com/content-product_info/product_id-7360/volvo_penta_dp_f_set.html http://www.getaprop.com/images/products/f[1].jpg http://www.getaprop.com/content-product_info/product_id-7360/volvo_penta_dp_f_set.html Volvo Penta Type "C" Duo-Prop Stainless Steel Propeller Set for Volvo Penta 280,290DP (Gasoline and Diesel) The Volvo Penta state-of-the-art stainless steel DP propeller has been specially designed to give maximum thrust where most needed. The high speed is achieved through thinner blades and powerful thrust. Greater torsional strength adds faster acceleration. The stainless steel material makes the propeller durable and highly resistant to cavitaion, damage and corrosion. All these factors contribute to excellent handing and comfort. http://www.getaprop.com/content-product_info/product_id-6756/volvo_penta_dp_c_set.html http://www.getaprop.com/images/products/DPC.jpg http://www.getaprop.com/content-product_info/product_id-6756/volvo_penta_dp_c_set.html Volvo Penta Type "D" Duo-Prop Aluminum Propeller Set for Volvo Penta DPS... The aluminum propeller for all gasoline and diesel engines using the DPS drive, with speeds up to 35 knots. For all engines with speeds in excess of 35 knots, the stainless steel Type F propeller should be used. http://www.getaprop.com/content-product_info/product_id-7342/volvo_penta_dp_d_set.html http://www.getaprop.com/images/products/DPD.jpg http://www.getaprop.com/content-product_info/product_id-7342/volvo_penta_dp_d_set.html Volvo PentaType "B" Duo-Prop Aluminum Propeller Set for 280DP-290DP Drives... For all engines with speeds in excess of 35 knots, the stainless steel Type C propeller should be used Aluminum DP propeller for gasoline and diesel engines. The two 3-blade propellers have very thin blade profiles, demanding the highest level of precision. http://www.getaprop.com/content-product_info/product_id-6752/volvo_penta_dp_b_set.html http://www.getaprop.com/images/products/DPB.jpg http://www.getaprop.com/content-product_info/product_id-6752/volvo_penta_dp_b_set.html Volvo Penta Type "A" Duo-Prop Aluminum Propeller Set for Diesel 280DP-290DP Drives... Aluminum DP propeller for diesel engines up to D41 engines. The unique design, of the 3-blade propeller in the front and the 4-blade propeller behind, is the key to the outstanding grip in the water. http://www.getaprop.com/content-product_info/product_id-6750/volvo_penta_dp_a_set.html http://www.getaprop.com/images/products/VPA.jpg http://www.getaprop.com/content-product_info/product_id-6750/volvo_penta_dp_a_set.html Fits Mercuriser Bravo One, Alpha One and Large Mercury Outboard Motors. Specifically designed to fit the Mercuriser Bravo One Drive. 1-1/16" 3 inches deep set socket end. Steel construction with tough powder coat finish. Special lifting fork for unlocking the tab washer. http://www.getaprop.com/content-product_info/product_id-7807/mercruiser_bravo_1_propeller_wrench.html http://www.getaprop.com/images/products/B1.jpg http://www.getaprop.com/content-product_info/product_id-7807/mercruiser_bravo_1_propeller_wrench.html Specifically designed to fit the Mercuriser Bravo Two Drive. 1-7/16" 3 inches deep set socket end. Steel construction with tough powder coat finish. Special lifting fork for unlocking the tab washer. Fits Mercuriser Bravo Two, TR, and Speedmaster Sterndrives http://www.getaprop.com/content-product_info/product_id-4133/mercruiser_bravo_2_propeller_wrench.html http://www.getaprop.com/images/products/SRSH.jpg http://www.getaprop.com/content-product_info/product_id-4133/mercruiser_bravo_2_propeller_wrench.html 3855516 Volvo Penta Duo-Prop DPR & DPS Tool Kit,D & F Series... To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-7099/volvo_penta_d_f_duo_prop_wrench.html http://www.getaprop.com/images/products/IMG_1587.JPG http://www.getaprop.com/content-product_info/product_id-7099/volvo_penta_d_f_duo_prop_wrench.html 3855516 Volvo Penta Duo-Prop DPR & DPS Tool Kit,D & F Series... To help you remove and remount duoprops.This special tool helps you remove the forward propeller nut. http://www.getaprop.com/content-product_info/product_id-3895/volvo_penta_d_f_duo_prop_wrench.html http://www.getaprop.com/images/products/IMG_1587.JPG http://www.getaprop.com/content-product_info/product_id-3895/volvo_penta_d_f_duo_prop_wrench.html 3861634 Volvo Penta XDP Ring Aluminum Anode fits Ocean Series Composite Drives... All our Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-9007/volvo_penta_xdp_aluminum_anode.html http://www.getaprop.com/images/products/3861634-11 copy.jpg http://www.getaprop.com/content-product_info/product_id-9007/volvo_penta_xdp_aluminum_anode.html 3861636 Volvo Penta XDP L-Block Aluminum Anode fits Ocean Series Composite Drives... All our Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-9008/volvo_penta_xdp_aluminum_anode.html http://www.getaprop.com/images/products/3861636A.jpg http://www.getaprop.com/content-product_info/product_id-9008/volvo_penta_xdp_aluminum_anode.html Vetus Propeller 6 blade....New Style Fits 50/80 kgf VETUS uses plastic propellers, which cannot corrode. Owing to their low weight, the maximum thrust force is obtained very quickly and with minimum use of energy. The propeller blades are shaped in such a way, that the thrust is equal in either direction. The are also designed with a special view to being used inside a tunnel, thus avoiding cavitation (= unwanted noise!). The New 6 Blade Bow thruster propeller from Vetus. Reduces current consumption by 10%. Increases thrust and reduces cavitation and vibration. Now you can buy these new propellers as retrofit parts for your existing Vetus Bow thrusters Diameter 7 9/32" Fits 50/80 kgf Bow Thruster<-'98 http://www.getaprop.com/content-product_info/product_id-1377/vetus_6_blade_propeller.html http://www.getaprop.com/images/products/155[1].jpg http://www.getaprop.com/content-product_info/product_id-1377/vetus_6_blade_propeller.html HJ103862 Hamilton Jet Large Disc Zinc Anode... Diameter: 6 3/4 Thickness:2 1/4" Bolt Diameter: 5/8 Bolt Circle: 2 3/4" Weight:18 1/2 Lbs. http://www.getaprop.com/content-product_info/product_id-3302/hamilton_jet_lg_disc_zinc_anode.html http://www.getaprop.com/images/products/hj9.JPG http://www.getaprop.com/content-product_info/product_id-3302/hamilton_jet_lg_disc_zinc_anode.html 32" LH Teignbridge 4 Blade NiBral Propeller 3" SAE Standard Taper & Keyway Full taper Hub Length 9" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8615/teignbridge_nibral_propeller_32.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8615/teignbridge_nibral_propeller_32.html 32" RH Teignbridge 4 Blade NiBral Propeller 3" SAE Standard Taper & Keyway Full taper Hub Length 9" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8614/teignbridge_nibral_propeller_32.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8614/teignbridge_nibral_propeller_32.html 24" LH Teignbridge 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8621/teignbridge_nibral_propeller_24.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8621/teignbridge_nibral_propeller_24.html 24" RH Teignbridge 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8620/teignbridge_nibral_propeller_24.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8620/teignbridge_nibral_propeller_24.html 24" LH Teignbridge 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8619/teignbridge_nibral_propeller_24.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8619/teignbridge_nibral_propeller_24.html 24" RH Teignbridge 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8618/teignbridge_nibral_propeller_24.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8618/teignbridge_nibral_propeller_24.html 23" LH Teignbridge 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8623/teignbridge_nibral_propeller_23.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8623/teignbridge_nibral_propeller_23.html 23" RH Teignbridge 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8622/teignbridge_nibral_propeller_23.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8622/teignbridge_nibral_propeller_23.html 21" LH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8629/teignbridge_nibral_propeller_21.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8629/teignbridge_nibral_propeller_21.html 21" RH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8628/teignbridge_nibral_propeller_21.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8628/teignbridge_nibral_propeller_21.html 20" LH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8631/teignbridge_nibral_propeller_20.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8631/teignbridge_nibral_propeller_20.html 20" RH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8630/teignbridge_nibral_propeller_20.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8630/teignbridge_nibral_propeller_20.html 19" LH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8633/teignbridge_nibral_propeller_19.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8633/teignbridge_nibral_propeller_19.html 19" RH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. http://www.getaprop.com/content-product_info/product_id-8632/teignbridge_nibral_propeller_19.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8632/teignbridge_nibral_propeller_19.html 30" LH Teignbridge Hi Skew 5 Blade NiBral Propeller 3" SAE Standard Taper & Keyway Full taper Hub Length 9" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8617/teignbridge_hi_skew_nibral_propeller_30.html http://www.getaprop.com/images/products/thumb_marlin5[1][1].jpg http://www.getaprop.com/content-product_info/product_id-8617/teignbridge_hi_skew_nibral_propeller_30.html 30" RH Teignbridge Hi Skew 5 Blade NiBral Propeller 3" SAE Standard Taper & Keyway Full taper Hub Length 9" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8616/teignbridge_hi_skew_nibral_propeller_30.html http://www.getaprop.com/images/products/thumb_marlin5[1][1].jpg http://www.getaprop.com/content-product_info/product_id-8616/teignbridge_hi_skew_nibral_propeller_30.html 22" LH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8625/teignbridge_nibral_propeller_22.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8625/teignbridge_nibral_propeller_22.html 22" RH Teignbridge 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8624/teignbridge_nibral_propeller_22.html http://www.getaprop.com/images/products/tbg1234.jpg http://www.getaprop.com/content-product_info/product_id-8624/teignbridge_nibral_propeller_22.html 22" LH Teignbridge Hi Skew 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8627/teignbridge_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8627/teignbridge_hi_skew_nibral_propeller_22.html 22" RH Teignbridge Hi Skew 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" A Teignbridge custom propeller will provide optimum vessell performance, not only in relation to speed but also noise, vibration-free performance, bollard pull and fuel economy. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8626/teignbridge_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8626/teignbridge_hi_skew_nibral_propeller_22.html 22" LH CJR Hi Skew 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8667/cjr_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8667/cjr_hi_skew_nibral_propeller_22.html 22" RH CJR Hi Skew 4 Blade NiBral Propeller 1 3/4" SAE Standard Taper & Keyway Full taper Hub Length 5 1/4" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8666/cjr_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8666/cjr_hi_skew_nibral_propeller_22.html 22" LH CJR Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8665/cjr_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8665/cjr_hi_skew_nibral_propeller_22.html 22" RH CJR Hi Skew 4 Blade NiBral Propeller 2" SAE Standard Taper & Keyway Full taper Hub Length 6" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8664/cjr_hi_skew_nibral_propeller_22.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8664/cjr_hi_skew_nibral_propeller_22.html 19" RH CJR Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8668/cjr_hi_skew_nibral_propeller_19.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8668/cjr_hi_skew_nibral_propeller_19.html 18" LH CJR Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8671/cjr_hi_skew_nibral_propeller_18.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8671/cjr_hi_skew_nibral_propeller_18.html 18" RH CJR Hi Skew 4 Blade NiBral Propeller 1 1/2" SAE Standard Taper & Keyway Full taper Hub Length 4 1/2" CJR offers Propellers for low powered Motor Cruisers, Motor Sailers to fast planning luxury Motor Yachts that require optimum performance. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8670/cjr_hi_skew_nibral_propeller_18.html http://www.getaprop.com/images/products/Tiger[1].jpg http://www.getaprop.com/content-product_info/product_id-8670/cjr_hi_skew_nibral_propeller_18.html Volvo QL 4 Blade Propeller fits 60-140hp Suzuki Outboards... Interchangeable Hub System Requires QL Hub # 41102357 Thru Hub Exhaust & 13 Tooth Spline DF-60,70 (Four Stroke) 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer Does not fit : DF 90,115,140 http://www.getaprop.com/content-product_info/product_id-7838/volvo_ql_4_propeller_suzuki.html http://www.getaprop.com/images/products/ql41.JPG http://www.getaprop.com/content-product_info/product_id-7838/volvo_ql_4_propeller_suzuki.html Volvo QL 3 Blade Propeller fits 60-140hp Suzuki Outboards... Interchangeable Hub System Requires QL Hub # 41102357 Thru Hub Exhaust & 13 Tooth Spline DF-60,70 (Four Stroke) 1998 and Newer DT-75 1983-97 DT-85 1979 and Newer DT-90 1989-97 DT-100 1989 and Newer DT-115,140 1981 and Newer Does not fit : DF 90,115,140 http://www.getaprop.com/content-product_info/product_id-7837/volvo_ql_propeller_suzuki.html http://www.getaprop.com/images/products/newql3.JPG http://www.getaprop.com/content-product_info/product_id-7837/volvo_ql_propeller_suzuki.html BBZ10-1/2" 3 Slot Bayliner Divers Dream Plate... Width:6" Length:12" Thickness:1/2" Slot Size:1/2"x 3" x 2" Weight:10lbs. Three Slot Plate Anode (approximately 12" x 6" x 0.6") with its zinc plated steel core plates is for use with Yachts that are equipped with a three bolt bonding system. Our plate anodes are cast with military spec. zinc alloy and weigh about 10 lbs. http://www.getaprop.com/content-product_info/product_id-5200/bayliner_divers_dream.html http://www.getaprop.com/images/products/bal.JPG http://www.getaprop.com/content-product_info/product_id-5200/bayliner_divers_dream.html BBZ10-1/2" 3 Slot Bayliner Divers Dream Plate... Width:6" Length:12" Thickness:1/2" Slot Size:1/2"x 3" x 2" Weight:10lbs. Three Slot Plate Anode (approximately 12" x 6" x 0.6") with its zinc plated steel core plates is for use with Yachts that are equipped with a three bolt bonding system. Our plate anodes are cast with military spec. zinc alloy and weigh about 10 lbs. http://www.getaprop.com/content-product_info/product_id-6481/bayliner_divers_dream.html http://www.getaprop.com/images/products/bal.JPG http://www.getaprop.com/content-product_info/product_id-6481/bayliner_divers_dream.html Michigan Vortex-4 Aluminum Propeller fits 35-65 HP Suzuki Outboards... Requires XHS Hub Kit # 115 (Not Included) Thru Hub Exhaust & 13 Tooth Spline DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-7468/michigan_vortex_4_propeller_suzuki.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-7468/michigan_vortex_4_propeller_suzuki.html Michigan Vortex Aluminum Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 114 (Not Included) Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-5244/michigan_vortex_4_propeller_mercury.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-5244/michigan_vortex_4_propeller_mercury.html Michigan Vortex-4 Aluminum Propeller fits 35-60 HP Honda Outboards... Thru Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 113 (Not Included) BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer http://www.getaprop.com/content-product_info/product_id-7414/michigan_vortex_4_propeller_honda.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-7414/michigan_vortex_4_propeller_honda.html Michigan Vortex-4 Aluminum Propeller fits 40-75 HP Force Outboards... 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-98 Requires XHS Hub Kit # 114 (Not Included) http://www.getaprop.com/content-product_info/product_id-4844/michigan_vortex_4_propeller_force.html http://www.getaprop.com/images/products/vortex4b1.JPG http://www.getaprop.com/content-product_info/product_id-4844/michigan_vortex_4_propeller_force.html Michigan Vortex Aluminum Propeller fits 40-60 HP Yamaha Outboards... 40 HP 1984 and Newer 48 HP 1995 and Newer 50 HP (Not T50) 1984 and Newer 55 HP 1976-95 60 HP 1976-91 FS 40 HP (4 Stroke) 1999 and Newer FS 50 HP (4 Stroke) 1995 and Newer FS 60 HP (4 Stroke) 1999 and Newer Thru Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 117 (Not Included) http://www.getaprop.com/content-product_info/product_id-5637/michigan_vortex_3_propeller_yamaha.html http://www.getaprop.com/images/products/vortex1[1][1].jpg http://www.getaprop.com/content-product_info/product_id-5637/michigan_vortex_3_propeller_yamaha.html Michigan Vortex-3 Aluminum Propeller fits 35-65 HP Suzuki Outboards... Requires XHS Hub Kit # 115 (Not Included) Thru Hub Exhaust & 13 Tooth Spline DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-7467/michigan_vortex_3_propeller_suzuki.html http://www.getaprop.com/images/products/vortex1[1][1].jpg http://www.getaprop.com/content-product_info/product_id-7467/michigan_vortex_3_propeller_suzuki.html Michigan Vortex-3 Aluminum Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 114 (Not Included) Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-5238/michigan_vortex_3_propeller_mercury.html http://www.getaprop.com/images/products/vortex1[1][1].jpg http://www.getaprop.com/content-product_info/product_id-5238/michigan_vortex_3_propeller_mercury.html Michigan Vortex Aluminum Propeller fits 35-60 HP Honda Outboards... Thru Hub Exhaust & 13 Tooth Spline Requires XHS Hub Kit # 113 (Not Included) BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer http://www.getaprop.com/content-product_info/product_id-7411/michigan_vortex_propeller_honda.html http://www.getaprop.com/images/products/vortex1[1].jpg http://www.getaprop.com/content-product_info/product_id-7411/michigan_vortex_propeller_honda.html Michigan Vortex-3 Aluminum Propeller fits 40-75 HP Force Outboards... 40-50 HP 1995 & Newer 70 HP 1991-95 75 HP 1996-98 Requires XHS Hub Kit # 114 (Not Included) http://www.getaprop.com/content-product_info/product_id-4846/michigan_vortex_3_propeller_force.html http://www.getaprop.com/images/products/vortex1.JPG http://www.getaprop.com/content-product_info/product_id-4846/michigan_vortex_3_propeller_force.html Kit includes a grease gun, 10oz tube of Lubraplate 130AA Grease, Zerc riser, Zerc Plug and a #3 allen wrench. 10 ounce tube of Lubraplate 130AA Grease Recommended for folding or geared Propellers... (Max-Prop) http://www.getaprop.com/content-product_info/product_id-8268/max_prop_grease_kit.html http://www.getaprop.com/images/products/MPGK.jpg http://www.getaprop.com/content-product_info/product_id-8268/max_prop_grease_kit.html Power Tech SST Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru-Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub Highly Polished Finish DIAMETER VARIES WITH PITCH, AVAILABLE IN 15"-21" PITCH, 3 BLADES, RIGHT-HAND ROTATION, FACTORY EQUIVALENT TO OMC SST AND VOLVO I/O - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-7651/power_tech_sst_propeller_omc800.html http://www.getaprop.com/images/products/PTOSS3R.jpg http://www.getaprop.com/content-product_info/product_id-7651/power_tech_sst_propeller_omc800.html Power Tech Stainless Propeller fits Volvo Penta SX Sterndrives... Thru-Hub Exhaust & 19 Tooth Spline Included Rubber OEM Hub Highly Polished Finish DIAMETER VARIES WITH PITCH, AVAILABLE IN 15"-21" PITCH, 3 BLADES, RIGHT-HAND ROTATION, FACTORY EQUIVALENT TO OMC SST AND VOLVO S/X I/O - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8783/power_tech_sst_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PYTOSS.jpg http://www.getaprop.com/content-product_info/product_id-8783/power_tech_sst_propeller_volvo_s_x.html Power Tech Ski Max-4 Stainless Propeller fits Volvo Penta SX Sterndrives... Thru-Hub Exhaust & 19 Tooth Spline Highly Polished Finish Included Cushion Loc Hub System Optional XHS 105 Universal Hub Kit 14.25" DIAMETER, AVAILABLE IN 17"-23" PITCH, 4 BLADE, RIGHT- AND LEFT-HAND ROTATION, HIGH RAKE, HARDWALL CUPPING, BETTER GRIP AND LIFT THAN PTC3, GREAT FOR I/Os AND SMALLER TWIN-ENGINE OFFSHORE APPLCIATIONS NEEDING GRIP - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8784/power_tech_ski_max_4_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PTPTC3R.jpg http://www.getaprop.com/content-product_info/product_id-8784/power_tech_ski_max_4_propeller_volvo_s_x.html Power Tech Performance Offshore-4 Blade Stainless Propeller fits Volvo Penta SX Sterndrives... Thru-Hub Exhaust & 19 Tooth Spline Highly Polished Finish Included Cushion Loc Hub System Optional XHS 105 Universal Hub Kit 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE, HIGH ASPECT RATIO X-CUT GEOMETRY, AGGRESSIVE CUPPING FOR EXCELLENT LIFT AND GRIP CHARACTERISTICS, USED ON MANY HIGH PERFORMANCE FLATS, ESPECIALLY WHERE GRIP IS AT A PREMIUM - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE . http://www.getaprop.com/content-product_info/product_id-8782/power_tech_ofx_4_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PTOFX4.jpg http://www.getaprop.com/content-product_info/product_id-8782/power_tech_ofx_4_propeller_volvo_s_x.html Power Tech Performance Offshore Stainless Propeller fits Volvo Penta SX Sterndrives... Thru-Hub Exhaust & 19 Tooth Spline Highly Polished Finish Included Cushion Loc Hub System Optional XHS 105 Universal Hub Kit 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE, HIGH ASPECT RATIO X-CUT GEOMETRY, AGGRESSIVE CUPPING FOR EXCELLENT LIFT AND GRIP CHARACTERISTICS, USED ON MANY HIGH PERFORMANCE FLATS, ESPECIALLY WHERE GRIP IS AT A PREMIUM - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE . http://www.getaprop.com/content-product_info/product_id-8780/power_tech_ofx_3_propeller_volvo_s_x.html http://www.getaprop.com/images/products/OFX3.JPG http://www.getaprop.com/content-product_info/product_id-8780/power_tech_ofx_3_propeller_volvo_s_x.html Power Tech Offshore-4 Blade Stainless Propeller fits Volvo Penta SX Sterndrives... Thru Hub Exhaust & 19 Tooth Spline. Included Cushion Loc Hub System Highly Polished Finish Optional XHS Hub Kit 105 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 4 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE AND FULL TIP CUP FOR EXCELLENT LIFT AND GRIP, GOOD FOR SINGLE- AND TWIN-ENGINE OFFSHORE APPLICATIONS AND STERNDRIVES - POLISHED FINISH SHOWN http://www.getaprop.com/content-product_info/product_id-8787/power_tech_offshore_4_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PTOFS4.jpg http://www.getaprop.com/content-product_info/product_id-8787/power_tech_offshore_4_propeller_volvo_s_x.html Power Tech Offshore-3 Blade Stainless Propeller fits Volvo Penta SX Sterndrives... Thru Hub Exhaust & 19 Tooth Spline. Optional XHS Hub Kit 105 Included Cushion Loc Hub System Highly Polished Finish 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE AND FULL TIP CUP FOR EXCELLENT LIFT AND GRIP MOST COMPARABLE TO MERCURY MIRAGE, OR YAMAHA SALTWATER SERIES - http://www.getaprop.com/content-product_info/product_id-8786/power_tech_offshore_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PTOFS3.jpg http://www.getaprop.com/content-product_info/product_id-8786/power_tech_offshore_propeller_volvo_s_x.html 14.75 X 15.5 X 4 Blade LH Cupped Splined Shaft... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. http://www.getaprop.com/content-product_info/product_id-8302/oj_xmp_propeller_14_75_522.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-8302/oj_xmp_propeller_14_75_522.html 13.7 X 17 X 4 LH Cupped Splined Shaft... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3168/oj_xmp_propeller_13_7_452.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3168/oj_xmp_propeller_13_7_452.html 13.7 X 17 X 4 LH Cupped 1 1/8"... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3167/oj_xmp_propeller_13_7_448.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3167/oj_xmp_propeller_13_7_448.html 13.7 X 15 X 4 LH Cupped Splined Shaft Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3166/oj_xmp_propeller_13_7_440.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3166/oj_xmp_propeller_13_7_440.html 13.7 X 15 X 4 LH Cupped 1 1/8"... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3165/oj_xmp_propeller_13_7_436.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3165/oj_xmp_propeller_13_7_436.html 12.5 X 12 X 4 LH Cupped Splined Shaft... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3158/oj_xmp_propeller_12_5_420.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3158/oj_xmp_propeller_12_5_420.html 12.5 X 13 X 4 LH Cupped 1 1/8"... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3163/oj_xmp_propeller_12_5_416.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3163/oj_xmp_propeller_12_5_416.html 12.5 X 12 X 4 LH Cupped 1 1/8"... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3155/oj_xmp_propeller_12_5_412.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3155/oj_xmp_propeller_12_5_412.html 12.5 X 13 X 4 LH Cupped 1"... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3162/oj_xmp_propeller_12_5_408.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3162/oj_xmp_propeller_12_5_408.html 12.5 X 12 X 4 LH Cupped 1"... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-3150/oj_xmp_propeller_12_5_404.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-3150/oj_xmp_propeller_12_5_404.html 14 X 16 X 3 RH Cupped 1 1/8" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-3131/oj_legend_propeller_14_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-3131/oj_legend_propeller_14_3b.html 14 X 16 X 3 LH Cupped 1 1/8" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-3130/oj_legend_propeller_14_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-3130/oj_legend_propeller_14_3b.html 14 X 16 X 3 RH Cupped 1" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-3129/oj_legend_propeller_14_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-3129/oj_legend_propeller_14_3b.html 14 X 16 X 3 LH Cupped 1" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-3128/oj_legend_propeller_14_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-3128/oj_legend_propeller_14_3b.html 13 X 13 X 3 RH Cupped 1" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-3127/oj_legend_propeller_13_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-3127/oj_legend_propeller_13_3b.html 13 X 13 X 3 LH Cupped 1" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-2946/oj_legend_propeller_13_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-2946/oj_legend_propeller_13_3b.html 14 X 18 X 4 RH Cupped 1 1/8" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3142/oj_force_propeller_14_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3142/oj_force_propeller_14_4b.html 14 X 18 X 4 LH Cupped 1 1/8" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3141/oj_force_propeller_14_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3141/oj_force_propeller_14_4b.html 14 X 16 X 4 RH Cupped 1" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3140/oj_force_propeller_14_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3140/oj_force_propeller_14_4b.html 14 X 16 X 4 LH Cupped 1" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3139/oj_force_propeller_14_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3139/oj_force_propeller_14_4b.html 13 X 13 X 4 LH Cupped 1" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3145/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3145/oj_force_propeller_13_4b.html 13 X 14 X 4 LH Cupped 1 1/8" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3138/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3138/oj_force_propeller_13_4b.html 13 X 14 X 4 LH Cupped 1" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3137/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3137/oj_force_propeller_13_4b.html 13 X 13 X 4 LH Cupped 1 1/8" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3135/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3135/oj_force_propeller_13_4b.html 13 X 13 X 4 RH Cupped 1" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3134/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3134/oj_force_propeller_13_4b.html 13 X 13 X 4 RH Cupped 1 1/8" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-3132/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-3132/oj_force_propeller_13_4b.html 13.7 X 17 X 4 LH Cupped Splined Shaft... Boasting a completely new design, this technologically advanced propeller combines over 70 years of experience and the CNC milling technique to give you the stability and consistency that you need in competition. .110 Cup http://www.getaprop.com/content-product_info/product_id-6396/oj_xmp_propeller_13_7_4b.html http://www.getaprop.com/images/products/XMPsm[1].jpg http://www.getaprop.com/content-product_info/product_id-6396/oj_xmp_propeller_13_7_4b.html 13 X 13 X 3 LH Cupped 1" The name speaks for itself. The Legend is exactly that- something incredible handed down form one generation to the next. What began as Oscar Johnson's dream has been redefined and perfected until it has emerged as the professional's choice in original tournament boat equipment. http://www.getaprop.com/content-product_info/product_id-6395/oj_legend_propeller_13_3b.html http://www.getaprop.com/images/products/leg3sm[1].gif http://www.getaprop.com/content-product_info/product_id-6395/oj_legend_propeller_13_3b.html 13 X 13 X 4 LH Cupped 1" Like it's 3-bladed predecessor, the Legend, it has become the top manufacturers choice as original equipment. The 4Force is the first 4-bladed prop created for tournament boats. It takes over where your inboard leaves off-showing its stuff at precisely the point where horsepower is transferred to the water http://www.getaprop.com/content-product_info/product_id-6394/oj_force_propeller_13_4b.html http://www.getaprop.com/images/products/4bladesm[1].jpg http://www.getaprop.com/content-product_info/product_id-6394/oj_force_propeller_13_4b.html PowerTech OFS-4 Blade Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 103 Universal Hub Kit 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 The OFS Four blade style is similar to the Mirage/Saltwater Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. http://www.getaprop.com/content-product_info/product_id-7659/power_tech_ofs_4_propeller_yamaha.html http://www.getaprop.com/images/products/PTOFS4.jpg http://www.getaprop.com/content-product_info/product_id-7659/power_tech_ofs_4_propeller_yamaha.html Power Tech Lifter Series Bowlifting Propellers fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 103 Universal Hub Kit 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7657/power_tech_bowlifting_propeller_yamaha.html http://www.getaprop.com/images/products/PTPTC3.jpg http://www.getaprop.com/content-product_info/product_id-7657/power_tech_bowlifting_propeller_yamaha.html PowerTech OFS-3 Blade Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 103 Universal Hub Kit 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 The OFS blade style is similar to the Mirage/Saltwater Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. http://www.getaprop.com/content-product_info/product_id-7658/power_tech_ofs_propeller_yamaha.html http://www.getaprop.com/images/products/PTOFS3.jpg http://www.getaprop.com/content-product_info/product_id-7658/power_tech_ofs_propeller_yamaha.html Power Tech All Purpose Stainless Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Black Max Equivalent... Best value for Standard Applications Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 103 Universal Hub Kit 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-7656/power_tech_all_purpose_propeller_yamaha.html http://www.getaprop.com/images/products/PTMQS3.jpg http://www.getaprop.com/content-product_info/product_id-7656/power_tech_all_purpose_propeller_yamaha.html Power Tech Aluminum Propeller fits 3.0L To 7.4L Yamaha Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 3.0L (130HP) EST/PSR 1989-93 4.3L (205HP) EST/YMS/PRS 1989-93 5.0L (205HP) EST/PRS/YEMS 1989-93 5.7L (260HP) EST/PRS/TEMS 1989-93 7.4L (300HP) HYDRA DRIVE/EST 1992-93 http://www.getaprop.com/content-product_info/product_id-8719/power_tech_propeller_yamaha.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8719/power_tech_propeller_yamaha.html Power Tech X/Series-4 Blade Stainless Propeller fits Volvo Penta SX Sterndrives... XHS Hub Kit 105 (Not Included) Interchangeable Hub Propeller High Polish Finish Thru Hub Exhaust & 19 Tooth Spline. http://www.getaprop.com/content-product_info/product_id-8735/power_tech_x_series_4_propeller_volvo_sx.html http://www.getaprop.com/images/products/PTELE4.JPG http://www.getaprop.com/content-product_info/product_id-8735/power_tech_x_series_4_propeller_volvo_sx.html Power Tech Stainless Propeller fits Volvo Penta SX Sterndrives... XHS Hub Kit 105 (Not Included) Interchangeable Hub Propeller High Polish Finish Thru Hub Exhaust & 19 Tooth Spline. http://www.getaprop.com/content-product_info/product_id-8727/power_tech_x_series_propeller_volvo_sx.html http://www.getaprop.com/images/products/PTELE3R.jpg http://www.getaprop.com/content-product_info/product_id-8727/power_tech_x_series_propeller_volvo_sx.html PowerTech 4 Blade Stainless Black Max Propeller fits Volvo S/X Sterndrives... Similar to Mercury's 4 Blade Black Max. Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 105 Universal Hub Kit DIAMETER VARIES WITH PITCH, AVAILABLE IN 15"-21" PITCH, 4 BLADES, RIGHT- AND LEFT-HAND ROTATION, LOW RAKE, STERNLIFTING PROP, GREAT FOR SKI BOATS AND I/Os - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8879/power_tech_black_max_4_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PTMSQ4.jpg http://www.getaprop.com/content-product_info/product_id-8879/power_tech_black_max_4_propeller_volvo_s_x.html Power Tech R/Series Stainless Propeller fits Volvo Penta SX Sterndrives... Thru Hub Exhaust & 19 Tooth Spline. Optional XHS Hub Kit 105 Interchangeable Hub Propeller Standard High Polish Finish 14.25" DIAMETER, AVAILABLE IN 15",17",19",21" PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION,HIGH PERFORMANCE GEOMETRY, GREAT ALL-AROUND PERFORMANCE PROPELLER, TERMED THE R-SERIES, SIMILAR TO RAPTURE - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8785/power_tech_r_series_propeller_volvo_sx.html http://www.getaprop.com/images/products/PTRAS3R.jpg http://www.getaprop.com/content-product_info/product_id-8785/power_tech_r_series_propeller_volvo_sx.html Power Tech Baby Offshore -4 Stainless Propeller fits Volvo Penta SX Sterndrives... Thru-Hub Exhaust & 19 Tooth Spline Highly Polished Finish Included Cushion Loc Hub System Optional XHS 105 Universal Hub Kit 14.25" DIAMETER, AVAILABLE IN 17"-23" PITCH, 4 BLADES, RIGHT-HAND ROTATION, GREAT ALL-AROUND PERFORMANCE FOR INBOARD/OUTBOARD SKI/RUNABOUTS AND SMALL OFFSHORES - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8878/power_tech_baby_offshore_propeller_volvo_s_x.html http://www.getaprop.com/images/products/PTSFS4.JPG http://www.getaprop.com/content-product_info/product_id-8878/power_tech_baby_offshore_propeller_volvo_s_x.html Power Tech Aluminnum Propeller for Volvo Penta SX Cobra.... Thru-Hub Exhaust & 19 Tooth Spline Rubber OEM Hub Included FACTORY EQUIVALENT FOR VOLVO SX DRIVE - 19-SPLINE RUBBER HUB USES FACTORY HARDWARE - ALUMINUM - BLACK http://www.getaprop.com/content-product_info/product_id-8788/power_tech_propeller_volvo_sx.html http://www.getaprop.com/images/products/PTEVESX.jpg http://www.getaprop.com/content-product_info/product_id-8788/power_tech_propeller_volvo_sx.html Power Tech Aluminnum Propeller for Volvo Penta SX Cobra.... Thru-Hub Exhaust & 19 Tooth Spline Optional XHS 105 Universal Hub Kit http://www.getaprop.com/content-product_info/product_id-8718/power_tech_propeller_volvo_sx.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8718/power_tech_propeller_volvo_sx.html Power Tech Match "B" Duo-Prop Aluminum Propeller Set for 280DP-290DP Drives... These propellers are intended as direct OEM replacements for the Volvo Duoprop propellers, and as such, use OEM equivalent geometries. For all engines with speeds in excess of 35 knots, the stainless steel Type C propeller should be used Aluminum DP propeller for gasoline and diesel engines. The two 3-blade propellers have very thin blade profiles, demanding the highest level of precision. http://www.getaprop.com/content-product_info/product_id-7731/_new_power_tech_match_dp_b_set.html http://www.getaprop.com/images/products/ptprop.jpg http://www.getaprop.com/content-product_info/product_id-7731/_new_power_tech_match_dp_b_set.html Power Tech Match Type "A" Duo-Prop Aluminum Propeller Set for Diesel 280DP-290DP Drives... These propellers are intended as direct OEM replacements for the Volvo Duoprop propellers, and as such, use OEM equivalent geometries. Aluminum DP propeller for diesel engines up to D41 engines. The unique design, of the 3-blade propeller in the front and the 4-blade propeller behind, is the key to the outstanding grip in the water. http://www.getaprop.com/content-product_info/product_id-7730/_new_power_tech_match_dp_a_set.html http://www.getaprop.com/images/products/ptprop.jpg http://www.getaprop.com/content-product_info/product_id-7730/_new_power_tech_match_dp_a_set.html Power Tech X/Series-4 Blade Stainless Propeller fits OMC-800 Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer http://www.getaprop.com/content-product_info/product_id-8734/power_tech_x_series_4_propeller_omc_800.html http://www.getaprop.com/images/products/PTELE4.JPG http://www.getaprop.com/content-product_info/product_id-8734/power_tech_x_series_4_propeller_omc_800.html Power Tech X/Series Stainless Propeller fits OMC-800 Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Finish is Polish Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer http://www.getaprop.com/content-product_info/product_id-8726/power_tech_x_series_propeller_omc_800.html http://www.getaprop.com/images/products/PTELE3R.jpg http://www.getaprop.com/content-product_info/product_id-8726/power_tech_x_series_propeller_omc_800.html PowerTech Ski Max-4 Stainless Propeller fits 150-300 HP Evinrude, Johnson Outboards... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer 14.25" DIAMETER, AVAILABLE IN 17"-23" PITCH, 4 BLADE, RIGHT- AND LEFT-HAND ROTATION, HIGH RAKE, HARDWALL CUPPING, BETTER GRIP AND LIFT THAN PTC3, GREAT FOR I/Os AND SMALLER TWIN-ENGINE OFFSHORE APPLCIATIONS NEEDING GRIP - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8779/power_tech_ski_max_4_propeller_omc800.html http://www.getaprop.com/images/products/PTPTC3R.jpg http://www.getaprop.com/content-product_info/product_id-8779/power_tech_ski_max_4_propeller_omc800.html Power Tech Offshore-4 Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 4 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE AND FULL TIP CUP FOR EXCELLENT LIFT AND GRIP, GOOD FOR SINGLE- AND TWIN-ENGINE OFFSHORE APPLICATIONS AND STERNDRIVES - POLISHED FINISH SHOWN http://www.getaprop.com/content-product_info/product_id-7650/power_tech_offshore_4_propeller_omc800.html http://www.getaprop.com/images/products/PTOFS4.jpg http://www.getaprop.com/content-product_info/product_id-7650/power_tech_offshore_4_propeller_omc800.html Power Tech Offshore Stainless Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE AND FULL TIP CUP FOR EXCELLENT LIFT AND GRIP MOST COMPARABLE TO MERCURY MIRAGE, OR YAMAHA SALTWATER SERIES - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-7649/power_tech_offshore_propeller_omc800.html http://www.getaprop.com/images/products/PTOFS3.jpg http://www.getaprop.com/content-product_info/product_id-7649/power_tech_offshore_propeller_omc800.html Power Tech Accelerator Stainless PropellerFits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer 13.75" DIAMETER, AVAILABLE IN 18"-28" PITCH, 4 BLADES, RIGHT-HAND ROTATION, HIGH RAKE, SHARP RADIUS CUP, EXCELLENT LIFT, SMALL HUB, MAY BE RUN OVER- AND THRU-HUB EXHAUST, OR SEALED WITH RING, PREFERS HIGHER MOTOR ELEVATIONS, MOST SIMILAR TO MERCURY TROPHY - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-7648/power_tech_accelerator_4_propeller_omc800.html http://www.getaprop.com/images/products/PTTRO.jpg http://www.getaprop.com/content-product_info/product_id-7648/power_tech_accelerator_4_propeller_omc800.html Power Tech Aluminum Propeller Fits OMC Model 800, King Cobra & Cobra(Non SX Drive)3.0L-8.2L Drives... Requires XHS Hub Kit # 100 (Not Included) 1991 & Newer Requires XHS Hub Kit # 101 (Not Included) 1990 & Older http://www.getaprop.com/content-product_info/product_id-8717/power_tech_propeller_omc800.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8717/power_tech_propeller_omc800.html Power Tech R/Series Stainless Propeller fits OMC 400 Cobra Sterndrives... Equivalent to Rapture, Ballistic & Stilletto Thru Hub Exhaust 13 Tooth Spline Optional XHS Hub Kit 106 Standard Finish Is Polish Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-8777/power_tech_r_series_propeller_omc400.html http://www.getaprop.com/images/products/PTRAF3.jpg http://www.getaprop.com/content-product_info/product_id-8777/power_tech_r_series_propeller_omc400.html Power Tech Flats 4-Blade Stainless Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Highly Polished Finish Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-7629/power_tech_flats_4_propeller_omc400.html http://www.getaprop.com/images/products/PFF4[1].jpg http://www.getaprop.com/content-product_info/product_id-7629/power_tech_flats_4_propeller_omc400.html Power Tech All Purpose Stainless Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Highly Polished Finish Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-7628/power_tech_all_purpose_propeller_omc400.html http://www.getaprop.com/images/products/RED[1].jpg http://www.getaprop.com/content-product_info/product_id-7628/power_tech_all_purpose_propeller_omc400.html Power Tech Accelerator-4 Stainless Propeller fits OMC 400 Cobra Sterndrives... Thru Hub Exhaust 13 Tooth Spline Rubber Hub Bushing Included Highly Polished Finish Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-7627/power_tech_accelerator_4_propeller_omc400.html http://www.getaprop.com/images/products/RXB[1].jpg http://www.getaprop.com/content-product_info/product_id-7627/power_tech_accelerator_4_propeller_omc400.html Power Tech Aluminum 3 Blade Propeller Fits OMC Model 400 & 2.3L-3.0L Cobra Drives... Thru Hub Exhaust 13 Tooth Spline Requires XHS Hub Kit #106 (Not Included) Model 400: 2.3 L (120HP) Thru 1991 2.5 L (120HP) 1978-84 3.0 L (140HP) Thru 1989 Cobra: 2.3 L (128HP) 1988-91 2.5 L (120HP) 1986-87 3.0 L (140HP) 1986-87 http://www.getaprop.com/content-product_info/product_id-8715/power_tech_propeller_omc400.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8715/power_tech_propeller_omc400.html Power Tech X/Series-4 Blade Stainless Propeller fits Alpha & Bravo 1 Drives... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline High Polish Finish http://www.getaprop.com/content-product_info/product_id-8733/power_tech_x_series_4_propeller_mercruiser.html http://www.getaprop.com/images/products/PTELE4.JPG http://www.getaprop.com/content-product_info/product_id-8733/power_tech_x_series_4_propeller_mercruiser.html Power Tech Stainless Propeller fits Alpha & Bravo 1 Drives... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline High Polish Finish DIAMETER VARIES WITH PITCH, AVAILABLE IN 15",17",19",21" PITCH, 3 BLADES, RIGHT-HAND ROTATION, XTREME VALUE SERIES http://www.getaprop.com/content-product_info/product_id-8725/power_tech_x_series_propeller_mercruiser.html http://www.getaprop.com/images/products/PTELE3R.jpg http://www.getaprop.com/content-product_info/product_id-8725/power_tech_x_series_propeller_mercruiser.html Power Tech WideThruster Series Load Pushing Propeller fits Mercruiser Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 16" DIAMETER, AVAILABLE IN 14"-16" PITCH, 3 BLADE, RIGHT-HAND ROTATION, WIDE BLADE, THRUSTER SERIES LOAD PUSHING PROP FOR PONTOONS AND WORKBOATS - SATIN FINISH SHOWN http://www.getaprop.com/content-product_info/product_id-8796/power_tech_wide_thruster_propeller.html http://www.getaprop.com/images/products/PTWBV3R.jpg http://www.getaprop.com/content-product_info/product_id-8796/power_tech_wide_thruster_propeller.html Power Tech Stainless Thruster Propeller with WBB Wide Blade Style fits Mercruiser Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 15.50" DIAMETER, AVAILABLE IN 11"-14" PITCH, 3 BLADE, RIGHT- AND LEFT-HAND ROTATION, WIDE BLADE, THRUSTER SERIES LOAD PUSHING PROP FOR PONTOONS AND WORKBOATS http://www.getaprop.com/content-product_info/product_id-7534/power_tech_thruster_propeller.html http://www.getaprop.com/images/products/PTWBB3.jpg http://www.getaprop.com/content-product_info/product_id-7534/power_tech_thruster_propeller.html Power Tech Sternlifting 3 Blade Stainless Propeller fits Mercruiser Sterndrives... Similar to Mercury's Black Max Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit DIAMETER VARIES WITH PITCH, AVAILABLE IN 15"-21" PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, LOW RAKE, STERNLIFTING PROP, FACTORY EQUIVALENT TO MERCURY BLACK MAX - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-7543/power_tech_sternlifting_propeller.html http://www.getaprop.com/images/products/PTMQS3.jpg http://www.getaprop.com/content-product_info/product_id-7543/power_tech_sternlifting_propeller.html PowerTech 4 Blade Stainless Ski Max Propeller fits Mercruiser Sterndrives... Similar to Mercury's 4 Blade Black Max. Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit DIAMETER VARIES WITH PITCH, AVAILABLE IN 15"-21" PITCH, 4 BLADES, RIGHT- AND LEFT-HAND ROTATION, LOW RAKE, STERNLIFTING PROP, GREAT FOR SKI BOATS AND I/Os - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-7544/power_tech_ski_max_4_propeller.html http://www.getaprop.com/images/products/PTMSQ4.jpg http://www.getaprop.com/content-product_info/product_id-7544/power_tech_ski_max_4_propeller.html Power Tech Performance Semi Cleaver-4 Blade Stainless Propeller fits Alpha and Bravo-One Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 14" DIAMETER, AVAILABLE IN 15"-21" PITCH, 4-BLADES, RIGHT- AND LEFT-HAND ROTATION, IMPROVED STERNLIFT OVER SCE3 - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8801/power_tech_semi_cleaver_4_propeller.html http://www.getaprop.com/images/products/PTSCE4.jpg http://www.getaprop.com/content-product_info/product_id-8801/power_tech_semi_cleaver_4_propeller.html Power Tech Performance Semi Cleaver Stainless Propeller fits Alpha and Bravo-One Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 14" DIAMETER, AVAILABLE IN 15"-21" PITCH, 3-BLADES, RIGHT- AND LEFT-HAND ROTATION, STERNLIFTING, EASY-TO-TURN SEMI-CLEAVER GEOMETRY, SIMILAR TO YAMAHA SEMI-SEMI-CLEAVER - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-8800/power_tech_semi_cleaver_propeller_mercury.html http://www.getaprop.com/images/products/PTSCE3.jpg http://www.getaprop.com/content-product_info/product_id-8800/power_tech_semi_cleaver_propeller_mercury.html Power Tech R/Series Stainless Propeller fits Alpha & Bravo 1 Drives... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline High Polish Finish 14.25" DIAMETER, AVAILABLE IN 15" THRU 23" PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION,HIGH PERFORMANCE GEOMETRY, GREAT ALL-AROUND PERFORMANCE PROPELLER, TERMED THE R-SERIES, SIMILAR TO RAPTURE http://www.getaprop.com/content-product_info/product_id-8795/power_tech_r_series_propeller_mercruiser.html http://www.getaprop.com/images/products/PTRAS3R.jpg http://www.getaprop.com/content-product_info/product_id-8795/power_tech_r_series_propeller_mercruiser.html Power Tech Performance Offshore Stainless Propeller fits Alpha and Bravo-One Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 4 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE, HIGH ASPECT RATIO X-CUT GEOMETRY, AGGRESSIVE CUPPING FOR EXCELLENT LIFT AND GRIP CHARACTERISTICS, BETTER MOTOR ELEVATION CAPABILITY THAN OFX3, USED ON MANY HIGH PERFORMANCE FLATS, ESPECIALLY WHERE GRIP IS AT A PREMIUM - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE . http://www.getaprop.com/content-product_info/product_id-8799/power_tech_ofx_4_propeller.html http://www.getaprop.com/images/products/OFX4.JPG http://www.getaprop.com/content-product_info/product_id-8799/power_tech_ofx_4_propeller.html Power Tech Performance Offshore Stainless Propeller fits Alpha and Bravo-One Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 15.25" DIAMETER, AVAILABLE IN 14"-28" IN PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, MODERATELY HIGH RAKE, HIGH ASPECT RATIO X-CUT GEOMETRY, AGGRESSIVE CUPPING FOR EXCELLENT LIFT AND GRIP CHARACTERISTICS, USED ON MANY HIGH PERFORMANCE FLATS, ESPECIALLY WHERE GRIP IS AT A PREMIUM - http://www.getaprop.com/content-product_info/product_id-8798/power_tech_ofx_3_propeller.html http://www.getaprop.com/images/products/OFX3.JPG http://www.getaprop.com/content-product_info/product_id-8798/power_tech_ofx_3_propeller.html PowerTech Offshore-5 Blade Stainless Propeller fits Alpha and Bravo-1 Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Included Finish is Polish Optional XHS 102 Universal Hub Kit Please Allow 2-3 Weeks For Delivery 15.25" DIAMETER, 5-BLADE OFFSHORE SERIES CUSTOM PROP FOR HIGHER BLADE SURFACE AREA AND GRIP, SPECIAL ORDER - ALLOW 3-4 WEEKS FOR DELIVERY - POLISHED FINISH SHOWN http://www.getaprop.com/content-product_info/product_id-8797/power_tech_offshore_5_propeller.html http://www.getaprop.com/images/products/PTOFS5.jpg http://www.getaprop.com/content-product_info/product_id-8797/power_tech_offshore_5_propeller.html Power Tech OFS 4 Blade Stainless Propeller fits Mercruiser Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit The OFS blade style is similar to the Mirage/Saltwater Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. The OFS has a constant 15.25 inch diameter, regardless of pitch. It is available in every inch of pitch from 14-28, right & left hand rotation with Your choice of the Premium Cushion Lok Hub design or Square Hub to receive the Vortex/Flo-Torq hub kits. http://www.getaprop.com/content-product_info/product_id-7533/power_tech_offshore_4_propeller.html http://www.getaprop.com/images/products/PTOFS4.jpg http://www.getaprop.com/content-product_info/product_id-7533/power_tech_offshore_4_propeller.html Power Tech Offshore 3 Blade Stainless fits Mercruiser Sterndrives... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Optional XHS 102 Universal Hub Kit The OFS blade style is similar to the Mirage/Saltwater Series, designed for V-bottom off shore style boats, I/O applications, high performance tri-toons and boats over 3500lbs. The OFS has a constant 15.25 inch diameter, regardless of pitch. It is available in every inch of pitch from 14-28, right & left hand rotation Square Hub to receive the XHS hub kit 102. http://www.getaprop.com/content-product_info/product_id-7532/power_tech_offshore_propeller.html http://www.getaprop.com/images/products/PTOFS3.jpg http://www.getaprop.com/content-product_info/product_id-7532/power_tech_offshore_propeller.html PowerTech 3 Blade Stainless Bow Lifting Propeller fits Mercruiser Sterndrives... Similar to Rapture, Stiletto & Ballistic... Thru-Hub Exhaust & 15 Tooth Spline Included Cushion Loc Hub System Highly Polished Finish Optional XHS 102 Universal Hub Kit 14.25" DIAMETER, AVAILABLE IN 14"-23" PITCH, 3 BLADES, RIGHT- AND LEFT-HAND ROTATION, HIGH RAKE, HARDWALL CUP, EXCELLENT LIFT AND GRIP IN AN ALL-AROUND PROPELLER - SATIN FINISH SHOWN - POLISHED FINISH AVAILABLE http://www.getaprop.com/content-product_info/product_id-7542/power_tech_bow_lifter_propeller.html http://www.getaprop.com/images/products/PTPTC3.jpg http://www.getaprop.com/content-product_info/product_id-7542/power_tech_bow_lifter_propeller.html Power Tech Aluminum 3 Blade Propeller Fits Alpha & Bravo 1 Drives.... XHS Hub Kit 102 Not Included High Gloss Powder Coat (protects aluminum from corrosion) Optimal Blade Thickness for performance Cupped Trailing Blade Edge (better grab) Exchangeable (XHS) Hub System that is compatible with the Merc Flo-TorqII Urethane cusioned hub (protects your lower unit from damage) Flared Hub Design (prevents ventilation blow-out) Interchangeable with Mercury Flo Torq II exchangeable hub system http://www.getaprop.com/content-product_info/product_id-8716/power_tech_propeller_mercruiser.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8716/power_tech_propeller_mercruiser.html Power Tech Aluminum Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Bushing Included 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8749/power_tech_propeller_yamaha.html http://www.getaprop.com/images/products/PTAEY.JPG http://www.getaprop.com/content-product_info/product_id-8749/power_tech_propeller_yamaha.html Power Tech Aluminum Propeller fits 150-300 HP Yamaha Outboards... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 103 (Not Included) 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8714/power_tech_propeller_yamaha.html http://www.getaprop.com/images/products/PTAEUN.JPG http://www.getaprop.com/content-product_info/product_id-8714/power_tech_propeller_yamaha.html Power Tech Aluminum Propeller fits 50-130 HP Yamaha Outboards... Requires XHS Hub Kit 103 (Not Included) 115,130 & FS115 Requires XHS Hub Kit 108 (Not Included) All Others T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer 115 HP 1984 and Newer 130 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer FS115 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8713/power_tech_propeller_yamaha.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8713/power_tech_propeller_yamaha.html Power Tech Aluminum Propeller fits 150-250 HP Suzuki Outboards... Thru-Hub Exhaust & 15 Tooth Spline Requires XHS Hub Kit # 104 (Not Included) DT 150 HP 1986 and Newer DT 175 HP 1986-92 DT 200 HP 1986 and Newer DT 225 HP 1990 and Newer DT 250 HP 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8712/power_tech_propeller_suzuki.html http://www.getaprop.com/images/products/PTAEUN.JPG http://www.getaprop.com/content-product_info/product_id-8712/power_tech_propeller_suzuki.html Power Tech Aluminum Propeller fits 135-300 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer http://www.getaprop.com/content-product_info/product_id-8708/power_tech_propeller_mercury.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8708/power_tech_propeller_mercury.html Power Tech Aluminum Propeller fits 135-225 HP Honda Outboards... Thru Hub Exhaust & 15 Tooth Spline. V-6 & V-8... 4 3/4 Gearcase Requires XHS Hub Kit # 107 (Not Included) 135 HP 2004 and Newer 150 HP 2004 and Newer 200 HP 2003 and Newer 225 HP 2003 and Newer http://www.getaprop.com/content-product_info/product_id-8706/power_tech_propeller_honda.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8706/power_tech_propeller_honda.html Power Tech Aluminum Propeller fits 35-60HP Honda Outboards... Thru Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing BF 35 HP 1991-94 BF 40 HP 1995 & Newer BF 45 HP 1991-94 BF 50/50A 1995 & Newer BF 60/1995 & Newer http://www.getaprop.com/content-product_info/product_id-8827/power_tech_propeller_honda.html http://www.getaprop.com/images/products/PT-CU50-1.jpg http://www.getaprop.com/content-product_info/product_id-8827/power_tech_propeller_honda.html Power Tech Aluminum Propeller fits 25-30HP Honda Outboards... Rubber Hub Bushing. 10 Spline & Thru Hub Exhaust 25 HP All Years 30 HP All Years http://www.getaprop.com/content-product_info/product_id-8826/power_tech_propeller_honda.html http://www.getaprop.com/images/products/PT-BH.jpg http://www.getaprop.com/content-product_info/product_id-8826/power_tech_propeller_honda.html Power Tech Aluminum Propeller fits 75-150 HP Force Outboards... Thru Hub Exhaust & 15 Tooth Spline Dual Exhaust Units 75-150 HP 1995 and Newer Requires XHS Hub Kit # 102 (Not Included) http://www.getaprop.com/content-product_info/product_id-8704/power_tech_propeller_force.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8704/power_tech_propeller_force.html 18" Bronze 2 Blade Michigan Sailor Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6851/michigan_sailor_propeller_18_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6851/michigan_sailor_propeller_18_dia.html 17" Bronze 2 Blade Michigan Sailor Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6850/michigan_sailor_propeller_17_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6850/michigan_sailor_propeller_17_dia.html 16" Bronze 2 Blade Michigan Sailor Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6849/michigan_sailor_propeller_16_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6849/michigan_sailor_propeller_16_dia.html 15" Bronze 2 Blade Michigan Sailor Propeller... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6848/michigan_sailor_propeller_15_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6848/michigan_sailor_propeller_15_dia.html 14" Bronze 2 Blade Michigan Sailor Propeller... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6847/michigan_sailor_propeller_14_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6847/michigan_sailor_propeller_14_dia.html 13" Bronze 2 Blade Michigan Sailor Propeller... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6846/michigan_sailor_propeller_13_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6846/michigan_sailor_propeller_13_dia.html 12" Bronze 2 Blade Michigan Sailor Propeller... The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you're going when the wind stops blowing. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6845/michigan_sailor_propeller_12_dia.html http://www.getaprop.com/images/products/mwcsail.JPG http://www.getaprop.com/content-product_info/product_id-6845/michigan_sailor_propeller_12_dia.html 18" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... Factory Pilot bore is 1.00" SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6843/hung_shen_ssbp_propeller_18_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6843/hung_shen_ssbp_propeller_18_dia.html 17" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... Factory Pilot bore is 1.00" SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6842/hung_shen_ssbp_propeller_17_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6842/hung_shen_ssbp_propeller_17_dia.html 16" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... Factory Pilot bore is 1.00" SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6841/hung_shen_ssbp_propeller_16_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6841/hung_shen_ssbp_propeller_16_dia.html 15" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6840/hung_shen_ssbp_propeller_15_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6840/hung_shen_ssbp_propeller_15_dia.html 14" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6839/hung_shen_ssbp_propeller_14_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6839/hung_shen_ssbp_propeller_14_dia.html 13" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6838/hung_shen_ssbp_propeller_13_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6838/hung_shen_ssbp_propeller_13_dia.html 12" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6837/hung_shen_ssbp_propeller_12_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6837/hung_shen_ssbp_propeller_12_dia.html 11" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6836/hung_shen_ssbp_propeller_11_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6836/hung_shen_ssbp_propeller_11_dia.html 10" Bronze 2 Blade Hung Shen Skewed Sail Boat Propeller... SSBP is suitable for Yachts which have wider stern. The skewed blade can reduce vibration effectively, and deliver higher thrust. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6835/hung_shen_ssbp_propeller_10_dia.html http://www.getaprop.com/images/products/SSBP2[1].jpg http://www.getaprop.com/content-product_info/product_id-6835/hung_shen_ssbp_propeller_10_dia.html 28" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 70 Lbs Hub Dia Fwd 4" Hub Dia Aft 3 1/2" Hub Length 5 3/4" Bore Range 1 3/4 " To 2 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6380/hung_shen_htp_4_propeller_28_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6380/hung_shen_htp_4_propeller_28_dia.html 26" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 56 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4 " To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6379/hung_shen_htp_4_propeller_26_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6379/hung_shen_htp_4_propeller_26_dia.html 25" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 50 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4 " To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6378/hung_shen_htp_4_propeller_25_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6378/hung_shen_htp_4_propeller_25_dia.html 24" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 43 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6377/hung_shen_htp_4_propeller_24_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6377/hung_shen_htp_4_propeller_24_dia.html 23" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 40 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6376/hung_shen_htp_4_propeller_23_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6376/hung_shen_htp_4_propeller_23_dia.html 22" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 34 Lbs Hub Dia Fwd 2 13/16" Hub Dia Aft 2 7/16" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6375/hung_shen_htp_4_propeller_22_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6375/hung_shen_htp_4_propeller_22_dia.html 21" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 30 Lbs Hub Dia Fwd 2 13/16" Hub Dia Aft 2 7/16" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6374/hung_shen_htp_4_propeller_21_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6374/hung_shen_htp_4_propeller_21_dia.html 20" Bronze 4 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.70 Weight 24 Lbs Hub Dia Fwd 2 7/16" Hub Dia Aft 2 1/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6370/hung_shen_htp_4_propeller_20_dia.html http://www.getaprop.com/images/products/htp4b.JPG http://www.getaprop.com/content-product_info/product_id-6370/hung_shen_htp_4_propeller_20_dia.html 28" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 70 Lbs Hub Dia Fwd 4 1/8" Hub Dia Aft 3 3/4" Hub Length 5 3/4" Bore Range 2" To 2 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6247/hung_shen_ep_4_propeller_28_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6247/hung_shen_ep_4_propeller_28_dia.html 26" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 54 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4" To 2 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6246/hung_shen_ep_4_propeller_26_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6246/hung_shen_ep_4_propeller_26_dia.html 25" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 47 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4" To 2 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6245/hung_shen_ep_4_propeller_25_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6245/hung_shen_ep_4_propeller_25_dia.html 24" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 42 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2" To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6244/hung_shen_ep_4_propeller_24_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6244/hung_shen_ep_4_propeller_24_dia.html 23" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 38 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2" To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6243/hung_shen_ep_4_propeller_23_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6243/hung_shen_ep_4_propeller_23_dia.html 22" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 32 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8" To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6242/hung_shen_ep_4_propeller_22_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6242/hung_shen_ep_4_propeller_22_dia.html 21" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 30 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8" To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6241/hung_shen_ep_4_propeller_21_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6241/hung_shen_ep_4_propeller_21_dia.html 20" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 25 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4" To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6240/hung_shen_ep_4_propeller_20_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6240/hung_shen_ep_4_propeller_20_dia.html 19" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 21 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4" To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6239/hung_shen_ep_4_propeller_19_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6239/hung_shen_ep_4_propeller_19_dia.html 18" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 18 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 1/4" Bore Range 1 1/4" To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6238/hung_shen_ep_4_propeller_18_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6238/hung_shen_ep_4_propeller_18_dia.html 17" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 15 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/4" To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6237/hung_shen_ep_4_propeller_17_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-6237/hung_shen_ep_4_propeller_17_dia.html 16" X 4 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.68 Weight 13 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/8" To 1 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-8436/hung_shen_ep_4_propeller_16_dia.html http://www.getaprop.com/images/products/ep4.JPG http://www.getaprop.com/content-product_info/product_id-8436/hung_shen_ep_4_propeller_16_dia.html 28" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 60 Lbs Hub Dia Fwd 4" Hub Dia Aft 3 1/2" Hub Length 5 3/4" Bore Range 1 3/4" To 2 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6236/hung_shen_htp_3_propeller_28_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6236/hung_shen_htp_3_propeller_28_dia.html 26" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 51 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4" To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6235/hung_shen_htp_3_propeller_26_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6235/hung_shen_htp_3_propeller_26_dia.html 25" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 48 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4 " To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6234/hung_shen_htp_3_propeller_25_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6234/hung_shen_htp_3_propeller_25_dia.html 24" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 38 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6233/hung_shen_htp_3_propeller_24_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6233/hung_shen_htp_3_propeller_24_dia.html 23" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 35 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6232/hung_shen_htp_3_propeller_23_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6232/hung_shen_htp_3_propeller_23_dia.html 22" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 30 Lbs Hub Dia Fwd 2 13/16" Hub Dia Aft 2 7/16" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6231/hung_shen_htp_3_propeller_22_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6231/hung_shen_htp_3_propeller_22_dia.html 21" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 27 Lbs Hub Dia Fwd 2 13/16" Hub Dia Aft 2 7/16" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6230/hung_shen_htp_3_propeller_21_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6230/hung_shen_htp_3_propeller_21_dia.html 20" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 23 Lbs Hub Dia Fwd 2 7/16" Hub Dia Aft 2 1/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6229/hung_shen_htp_3_propeller_20_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6229/hung_shen_htp_3_propeller_20_dia.html 19" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 21 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6228/hung_shen_htp_3_propeller_19_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6228/hung_shen_htp_3_propeller_19_dia.html 18" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 18 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 1/4" Factory Pilot bore is 1.00" Typical displacement hull propeller. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6227/hung_shen_htp_3_propeller_18_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6227/hung_shen_htp_3_propeller_18_dia.html 17" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 15 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Factory Pilot bore is 1.00" Typical displacement hull propeller. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6226/hung_shen_htp_3_propeller_17_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6226/hung_shen_htp_3_propeller_17_dia.html 16" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 13 Lbs Hub Dia Fwd 2 3/16" Hub Dia Aft 1 15/16" Hub Length 3 3/8" Factory Pilot bore is 1.00" Typical displacement hull propeller. Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6225/hung_shen_htp_3_propeller_16_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6225/hung_shen_htp_3_propeller_16_dia.html 15" Bronze 3 Blade Hung Shen Heavy Thrust Propeller.. EAR= 0.50 Weight 10 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6224/hung_shen_htp_3_propeller_15_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6224/hung_shen_htp_3_propeller_15_dia.html 14" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 9 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6223/hung_shen_htp_3_propeller_14_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6223/hung_shen_htp_3_propeller_14_dia.html 13" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 7 Lbs Hub Dia Fwd 1 13/16" Hub Dia Aft 1 5/8" Hub Length 2 3/4" Bore Range 1" To 1 1/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6222/hung_shen_htp_3_propeller_13_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6222/hung_shen_htp_3_propeller_13_dia.html 12" X 3 Blade Bronze Hung Shen Heavy Thrust Propeller... EAR= 0.50 Weight 5.1 Lbs Hub Dia Fwd 1 3/4" Hub Dia Aft 1 5/8" Hub Length 2 3/8" Bore Range 7/8" To 1 1/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6221/hung_shen_htp_3_propeller_12_dia.html http://www.getaprop.com/images/products/thumb_Hung-Shen-HTP3[1].jpg http://www.getaprop.com/content-product_info/product_id-6221/hung_shen_htp_3_propeller_12_dia.html 28" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 60 Lbs Hub Dia Fwd 4 1/8" Hub Dia Aft 3 3/4" Hub Length 5 3/4" Bore Range 2" To 2 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6220/hung_shen_ep_3_propeller_28_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6220/hung_shen_ep_3_propeller_28_dia.html 26" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 51 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4 " To 2 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6219/hung_shen_ep_3_propeller_26_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6219/hung_shen_ep_3_propeller_26_dia.html 25" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 48 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4 " To 2 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6218/hung_shen_ep_3_propeller_25_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6218/hung_shen_ep_3_propeller_25_dia.html 24" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 38 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2 " To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6217/hung_shen_ep_3_propeller_24_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6217/hung_shen_ep_3_propeller_24_dia.html 23" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 35 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2 " To 2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6216/hung_shen_ep_3_propeller_23_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6216/hung_shen_ep_3_propeller_23_dia.html 22" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 30 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6215/hung_shen_ep_3_propeller_22_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6215/hung_shen_ep_3_propeller_22_dia.html 21" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 27 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6214/hung_shen_ep_3_propeller_21_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6214/hung_shen_ep_3_propeller_21_dia.html 20" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 23 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6213/hung_shen_ep_3_propeller_20_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6213/hung_shen_ep_3_propeller_20_dia.html 19" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 21 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6212/hung_shen_ep_3_propeller_19_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6212/hung_shen_ep_3_propeller_19_dia.html 18" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 18 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 1/4" Bore Range 1 1/4 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6211/hung_shen_ep_3_propeller_18_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6211/hung_shen_ep_3_propeller_18_dia.html 17" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 15 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/4 " To 1 1/2" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6210/hung_shen_ep_3_propeller_17_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6210/hung_shen_ep_3_propeller_17_dia.html 16" Bronze 3 Blade Hung Shen Efficiency Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... EAR= 0.55 Weight 13 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/8 " To 1 3/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6209/hung_shen_ep_3_propeller_16_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6209/hung_shen_ep_3_propeller_16_dia.html 15" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 10 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6208/hung_shen_ep_3_propeller_15_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6208/hung_shen_ep_3_propeller_15_dia.html 14" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 9 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6207/hung_shen_ep_3_propeller_14_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6207/hung_shen_ep_3_propeller_14_dia.html 13" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.55 Weight 7 Lbs Hub Dia Fwd 1 13/16" Hub Dia Aft 1 5/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6206/hung_shen_ep_3_propeller_13_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6206/hung_shen_ep_3_propeller_13_dia.html 12" X 3 Blade Bronze Hung Shen Efficiency Propeller... EAR= 0.55 Weight 5.1 Lbs Hub Dia Fwd 1 3/4" Hub Dia Aft 1 5/8" Hub Length 2 3/8" Bore Range 7/8" To 1 1/8" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6184/hung_shen_ep_3_propeller_12_dia.html http://www.getaprop.com/images/products/Hung Shen EP3 copy.JPG http://www.getaprop.com/content-product_info/product_id-6184/hung_shen_ep_3_propeller_12_dia.html 28"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.81 Weight 83 Lbs Hub Dia Fwd 4 1/8" Hub Dia Aft 3 3/4" Hub Length 5 3/4" Bore Range 2" To 2 1/2" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6322/michigan_dqx_ni_bral_propeller_28_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6322/michigan_dqx_ni_bral_propeller_28_dia.html 26"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.81 Weight 65 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4" To 2 1/4" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6321/michigan_dqx_ni_bral_propeller_26_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6321/michigan_dqx_ni_bral_propeller_26_dia.html 24"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.81 Weight 50 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2" To 2" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6320/michigan_dqx_ni_bral_propeller_24_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6320/michigan_dqx_ni_bral_propeller_24_dia.html 22"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.73 Weight 33 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8" To 2" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6319/michigan_dqx_ni_bral_propeller_22_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6319/michigan_dqx_ni_bral_propeller_22_dia.html 21"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.73 Weight 29 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8" To 2" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6318/michigan_dqx_ni_bral_propeller_21_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6318/michigan_dqx_ni_bral_propeller_21_dia.html 20"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.73 Weight 24 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4" To 1 3/4" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6317/michigan_dqx_ni_bral_propeller_20_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6317/michigan_dqx_ni_bral_propeller_20_dia.html 19"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.73 Weight 21 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4" To 1 3/4" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6316/michigan_dqx_ni_bral_propeller_19_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6316/michigan_dqx_ni_bral_propeller_19_dia.html 18"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.73 Weight 18 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 1/4" Bore Range 1 1/4" To 1 3/4" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6315/michigan_dqx_ni_bral_propeller_18_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6315/michigan_dqx_ni_bral_propeller_18_dia.html 17"X 4 Blade Ni-Bral Michigan DQX Propeller... EAR= 0.73 Weight 16 Lbs Hub Dia Fwd 2 1/2" Hub Dia Aft 2 1/4" Hub Length 3 1/4" Bore Range 1 1/4" To 1 1/2" DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6314/michigan_dqx_ni_bral_propeller_17_dia.html http://www.getaprop.com/images/products/dqx[1].jpg http://www.getaprop.com/content-product_info/product_id-6314/michigan_dqx_ni_bral_propeller_17_dia.html 18" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 16 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/4" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6305/michigan_djx_ni_bral_propeller_18_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6305/michigan_djx_ni_bral_propeller_18_dia.html 16" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 12 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/8 " To 1 1/2" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6303/michigan_djx_ni_bral_propeller_16_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6303/michigan_djx_ni_bral_propeller_16_dia.html 22" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 28 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8 " To 2" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6309/michigan_djx_ni_bral_propeller_22_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6309/michigan_djx_ni_bral_propeller_22_dia.html 21" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 26 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8 " To 2" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6308/michigan_djx_ni_bral_propeller_21_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6308/michigan_djx_ni_bral_propeller_21_dia.html 20" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 21 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/4" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6307/michigan_djx_ni_bral_propeller_20_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6307/michigan_djx_ni_bral_propeller_20_dia.html 19" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 19 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/4" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6306/michigan_djx_ni_bral_propeller_19_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6306/michigan_djx_ni_bral_propeller_19_dia.html 17" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 14 Lbs Hub Dia Fwd 2 1/2" Hub Dia Aft 2 1/4" Hub Length 3 1/4" Bore Range 1 1/4 " To 1 1/2" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6304/michigan_djx_ni_bral_propeller_17_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6304/michigan_djx_ni_bral_propeller_17_dia.html 28" Bronze 4 Blade Michigan Work Horse Bronze Propeller... EAR= 0.71 Weight 68 Lbs Hub Dia Fwd 4" Hub Dia Aft 3 1/2" Hub Length 5 1/4" Bore Range 1 3/4 " To 2 1/4" The Work Horse is the best known four blade propeller in the world for its ability to push hard working boats. It is designed for tug boats, push boats, and applications requiring maximum thrust where low speeds do not necessitate skewed blades. The semi-elliptical blade shape and constant pitch allows for excellent revers thrust performance that is necessary in many workboat applications. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6302/michigan_wh_propeller_28_dia.html http://www.getaprop.com/images/products/19413[4][1].jpg http://www.getaprop.com/content-product_info/product_id-6302/michigan_wh_propeller_28_dia.html 26" Bronze 4 Blade Michigan Work Horse Bronze Propeller... EAR= 0.71 Weight 56 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4 " To 2" The Work Horse is the best known four blade propeller in the world for its ability to push hard working boats. It is designed for tug boats, push boats, and applications requiring maximum thrust where low speeds do not necessitate skewed blades. The semi-elliptical blade shape and constant pitch allows for excellent revers thrust performance that is necessary in many workboat applications. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6301/michigan_wh_propeller_26_dia.html http://www.getaprop.com/images/products/19413[4][1].jpg http://www.getaprop.com/content-product_info/product_id-6301/michigan_wh_propeller_26_dia.html 25" Bronze 4 Blade Michigan Work Horse Bronze Propeller... EAR= 0.71 Weight 54 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4 " To 2" The Work Horse is the best known four blade propeller in the world for its ability to push hard working boats. It is designed for tug boats, push boats, and applications requiring maximum thrust where low speeds do not necessitate skewed blades. The semi-elliptical blade shape and constant pitch allows for excellent revers thrust performance that is necessary in many workboat applications. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6300/michigan_wh_propeller_25_dia.html http://www.getaprop.com/images/products/19413[4][1].jpg http://www.getaprop.com/content-product_info/product_id-6300/michigan_wh_propeller_25_dia.html 24" Bronze 4 Blade Michigan Work Horse Bronze Propeller... EAR= 0.71 Weight 41 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" The Work Horse is the best known four blade propeller in the world for its ability to push hard working boats. It is designed for tug boats, push boats, and applications requiring maximum thrust where low speeds do not necessitate skewed blades. The semi-elliptical blade shape and constant pitch allows for excellent revers thrust performance that is necessary in many workboat applications. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6299/michigan_wh_propeller_24_dia.html http://www.getaprop.com/images/products/19413[4][1].jpg http://www.getaprop.com/content-product_info/product_id-6299/michigan_wh_propeller_24_dia.html 28" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 55 Lbs Hub Dia Fwd 4" Hub Dia Aft 3 1/2" Hub Length 5 3/4" Bore Range 1 3/4" To 2 1/4" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6298/michigan_mp_propeller_28_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6298/michigan_mp_propeller_28_dia.html 26" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 51 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4" To 2" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6297/michigan_mp_propeller_26_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6297/michigan_mp_propeller_26_dia.html 25" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 44 Lbs Hub Dia Fwd 3 5/8" Hub Dia Aft 3 3/16" Hub Length 5 1/4" Bore Range 1 3/4 " To 2" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6296/michigan_mp_propeller_25_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6296/michigan_mp_propeller_25_dia.html 24" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 33 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6295/michigan_mp_propeller_24_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6295/michigan_mp_propeller_24_dia.html 23" Bronze 3 Blade Hung Shen Heavy Thrust Propeller... EAR= 0.51 Weight 35 Lbs Hub Dia Fwd 3 3/16" Hub Dia Aft 2 13/16" Hub Length 4 1/2" Bore Range 1 1/2 " To 1 3/4" Heavy duty manganese bronze alloy for durable performance. All have a anti-sing trailing edge installed to reduce propeller induced harmonics. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6293/michigan_mp_propeller_23_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6293/michigan_mp_propeller_23_dia.html 22" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 30 Lbs Hub Dia Fwd 2 13/16" Hub Dia Aft 2 7/16" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 1/2" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6292/michigan_mp_propeller_22_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6292/michigan_mp_propeller_22_dia.html 21" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 22 Lbs Hub Dia Fwd 2 13/16" Hub Dia Aft 2 7/16" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 1/2" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6291/michigan_mp_propeller_21_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6291/michigan_mp_propeller_21_dia.html 20" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 23 Lbs Hub Dia Fwd 2 7/16" Hub Dia Aft 2 1/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6290/michigan_mp_propeller_20_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6290/michigan_mp_propeller_20_dia.html 19" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 21 Lbs Hub Dia Fwd 2 7/16" Hub Dia Aft 2 1/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 3/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6289/michigan_mp_propeller_19_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6289/michigan_mp_propeller_19_dia.html 18" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... EAR= 0.51 Weight 18 Lbs Hub Dia Fwd 2 5/16" Hub Dia Aft 2" Hub Length 3 3/8" Bore Range 1 1/8" To 1 3/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6288/michigan_mp_propeller_18_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6288/michigan_mp_propeller_18_dia.html 17" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 12 Lbs Hub Dia Fwd 2 5/16" Hub Dia Aft 2" Hub Length 3 3/8" Bore Range 1 1/8 " To 1 3/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6287/michigan_mp_propeller_17_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6287/michigan_mp_propeller_17_dia.html 16" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... EAR= 0.51 Weight 13 Lbs Hub Dia Fwd 2 3/16" Hub Dia Aft 1 15/16" Hub Length 3 3/8" Bore Range 1 1/8 " To 1 1/4" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6286/michigan_mp_propeller_16_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6286/michigan_mp_propeller_16_dia.html 15" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller.. EAR= 0.51 Weight 10 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6285/michigan_mp_propeller_15_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6285/michigan_mp_propeller_15_dia.html 14" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 9 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6284/michigan_mp_propeller_14_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6284/michigan_mp_propeller_14_dia.html 13" Bronze 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 7 Lbs Hub Dia Fwd 1 13/16" Hub Dia Aft 1 5/8" Hub Length 2 3/4" Bore Range 1" To 1 1/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6283/michigan_mp_propeller_13_dia.html http://www.getaprop.com/images/products/19103[2][1].jpg http://www.getaprop.com/content-product_info/product_id-6283/michigan_mp_propeller_13_dia.html 12" X 3 Blade Michigan Machine Pitch Bronze Propeller... EAR= 0.51 Weight 5.1 Lbs Hub Dia Fwd 1 3/4" Hub Dia Aft 1 9/16" Hub Length 2 3/8" Bore Range 7/8" To 1 1/8" Machine Pitch (MP) is the finest and best know three blade for all-purpose use. The style and design is primarily used on vessels with speeds less than 15 knots. MP style propellers incorporate a semi-elliptical shape, constant pitch and ogival blade sections. The Heavy Duty (HD) is identical in design to the MP, but includes thicker blade edges engineered specifically for severe conditions. Its heavy duty edges resist abrasion and blade fracture. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6282/michigan_mp_propeller_12_dia.html http://www.getaprop.com/images/products/19103[3][1].jpg http://www.getaprop.com/content-product_info/product_id-6282/michigan_mp_propeller_12_dia.html 28" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 60 Lbs Hub Dia Fwd 4 1/8" Hub Dia Aft 3 3/4" Hub Length 5 3/4" Bore Range 2" To 2 1/2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6269/michigan_dj_propeller_28_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6269/michigan_dj_propeller_28_dia.html 26" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 46 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4 " To 2 1/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6268/michigan_dj_propeller_26_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6268/michigan_dj_propeller_26_dia.html 25" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 48 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4 " To 2 1/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6267/michigan_dj_propeller_25_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6267/michigan_dj_propeller_25_dia.html 24" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 36 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2 " To 2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6265/michigan_dj_propeller_24_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6265/michigan_dj_propeller_24_dia.html 23" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 33 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2 " To 2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6264/michigan_dj_propeller_23_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6264/michigan_dj_propeller_23_dia.html 22" Bronze 3 Blade Hung Shen Efficiency Propeller... EAR= 0.56 Weight 28 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 3/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6263/michigan_dj_propeller_22_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6263/michigan_dj_propeller_22_dia.html 21" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 25 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8 " To 1 3/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6262/michigan_dj_propeller_21_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6262/michigan_dj_propeller_21_dia.html 20" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 20 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 1/2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6261/michigan_dj_propeller_20_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6261/michigan_dj_propeller_20_dia.html 19" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 18 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4 " To 1 1/2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6260/michigan_dj_propeller_19_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6260/michigan_dj_propeller_19_dia.html 18" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 16 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 1/4" Bore Range 1 1/4 " To 1 1/2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6259/michigan_dj_propeller_18_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6259/michigan_dj_propeller_18_dia.html 17" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 13 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/4 " To 1 1/2" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6258/michigan_dj_propeller_17_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6258/michigan_dj_propeller_17_dia.html 16" Bronze 3 Blade Michigan Dyna-Jet Propeller... Factory Pilot bore is 1 1/8" For 1" bore must use 1" W/Nylon Bushing... EAR= 0.56 Weight 11 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/8 " To 1 3/8" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6257/michigan_dj_propeller_16_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6257/michigan_dj_propeller_16_dia.html 15" Bronze 3 Blade Michigan Dyna Jet Propeller... EAR= 0.56 Weight 10 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6256/michigan_dj_propeller_15_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6256/michigan_dj_propeller_15_dia.html 14" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight 9 Lbs Hub Dia Fwd 2" Hub Dia Aft 1 7/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6255/michigan_dj_propeller_14_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6255/michigan_dj_propeller_14_dia.html 13" Bronze 3 Blade Michigan Dyna-Jet Propeller... EAR= 0.56 Weight Lbs 7 Hub Dia Fwd 1 13/16" Hub Dia Aft 1 5/8" Hub Length 2 3/4" Bore Range 1" To 1 1/4" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6254/michigan_dj_propeller_13_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6254/michigan_dj_propeller_13_dia.html 12" X 3 Blade Bronze Michigan Dyna Jet Propeller... EAR= 0.56 Weight 5.1 Lbs Hub Dia Fwd 1 3/4" Hub Dia Aft 1 5/8" Hub Length 2 3/8" Bore Range 7/8" To 1 1/8" The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6253/michigan_dj_propeller_12_dia.html http://www.getaprop.com/images/products/dynajet_3blade[1].JPG http://www.getaprop.com/content-product_info/product_id-6253/michigan_dj_propeller_12_dia.html 28" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 66 Lbs Hub Dia Fwd 4 1/8" Hub Dia Aft 3 3/4" Hub Length 5 3/4" Bore Range 2" To 2 1/2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6281/michigan_dq_propeller_28_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6281/michigan_dq_propeller_28_dia.html 26" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 52 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4" To 2 1/4" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6280/michigan_dq_propeller_26_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6280/michigan_dq_propeller_26_dia.html 25" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 47 Lbs Hub Dia Fwd 3 3/4" Hub Dia Aft 3 3/8" Hub Length 4 7/8" Bore Range 1 3/4" To 2 1/4" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6279/michigan_dq_propeller_25_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6279/michigan_dq_propeller_25_dia.html 24" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 40 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2" To 2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6278/michigan_dq_propeller_24_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6278/michigan_dq_propeller_24_dia.html 23" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 36 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2" To 2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6277/michigan_dq_propeller_23_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6277/michigan_dq_propeller_23_dia.html 22" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 32 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8" To 1 3/4" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6276/michigan_dq_propeller_22_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6276/michigan_dq_propeller_22_dia.html 21" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 28 Lbs Hub Dia Fwd 3" Hub Dia Aft 2 3/4" Hub Length 4 1/8" Bore Range 1 3/8" To 1 3/4" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6275/michigan_dq_propeller_21_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6275/michigan_dq_propeller_21_dia.html 20" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 3 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4" To 1 1/2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6274/michigan_dq_propeller_20_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6274/michigan_dq_propeller_20_dia.html 19" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 21 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 3/4" Bore Range 1 1/4" To 1 1/2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6272/michigan_dq_propeller_19_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6272/michigan_dq_propeller_19_dia.html 18" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 18 Lbs Hub Dia Fwd 2 5/8" Hub Dia Aft 2 3/8" Hub Length 3 1/4" Bore Range 1 1/4" To 1 1/2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6271/michigan_dq_propeller_18_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6271/michigan_dq_propeller_18_dia.html 17" X 4 Blade Bronze Michigan Dyna-Quad Propeller... EAR= 0.69 Weight 14 Lbs Hub Dia Fwd 2 3/8" Hub Dia Aft 2 1/8" Hub Length 3 1/4" Bore Range 1 1/4" To 1 1/2" The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40' requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and "dig" of a three blade. This is also an excellent choice for the performance minded commercial boat operators. Made in the USA by Michigan Wheel Corporation - Grand Rapids, Michigan All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6270/michigan_dq_propeller_17_dia.html http://www.getaprop.com/images/products/Dyna-Quad.jpg http://www.getaprop.com/content-product_info/product_id-6270/michigan_dq_propeller_17_dia.html Power Tech Aluminnum Propeller fits 90-300 HP Evinrude Johnson Outboards.... Thru-Hub Exhaust & 15 Tooth Spline Rubber OEM Hub Included 15.00" DIAMETER, FACTORY EQUIVALENT FOR EVINRUDE/JOHNSON E-TEC & 2-STROKE 115-250HP - ALUMINUM - BLACK http://www.getaprop.com/content-product_info/product_id-8789/power_tech_propeller_e_j.html http://www.getaprop.com/images/products/PTEVESX.jpg http://www.getaprop.com/content-product_info/product_id-8789/power_tech_propeller_e_j.html Power Tech 3 Blade Aluminum Propeller fits 90-300 HP Evinrude Johnson Outboards... Thru-Hub Exhaust & 15 Tooth Spline Optional XHS 101 Universal Hub Kit 1990 & Older Optional XHS 100 Universal Hub Kit 1991 & Newer 90 HP ETEC (25" Shaft) 90,115,130,150,175,200,225,250 HP 1978 & Newer 100,150,155 HP Commercial 1978 & Newer 120-140 HP 1985 140 HP (25") 1989-94 185 HP 1984-85 235 HP 1978-85 275 HP 1986-88 300 HP 1986-95 http://www.getaprop.com/content-product_info/product_id-8703/power_tech_propeller_e_j.html http://www.getaprop.com/images/products/PTADUN.jpg http://www.getaprop.com/content-product_info/product_id-8703/power_tech_propeller_e_j.html 18 1/2" Power Tech 3 Blade Bravo 2 Stainless Steel Propeller... New larger Diameter for heavier boats...Available with Cushion Lock Hub System or Rubber Hub Bushing... PowerTech! Stainless Steel Propellers are cast in one integral piece in a ceramic mold. This process is used by all motor manufacturers as well as a few leading propeller manufacturers. The extra expense is well worth the outlay compared to the cheaper "weld-on blade" process. http://www.getaprop.com/content-product_info/product_id-6736/power_tech_bravo_2_propeller.html http://www.getaprop.com/images/products/brs391 copy.jpg http://www.getaprop.com/content-product_info/product_id-6736/power_tech_bravo_2_propeller.html 17 1/4" Power Tech 3 Blade Bravo 2 Stainless Steel Propeller...Available with Cushion Lock Hub System or Rubber Hub Bushing... PowerTech! Stainless Steel Propellers are cast in one integral piece in a ceramic mold. This process is used by all motor manufacturers as well as a few leading propeller manufacturers. The extra expense is well worth the outlay compared to the cheaper "weld-on blade" process. http://www.getaprop.com/content-product_info/product_id-6735/power_tech_bravo_2_propeller.html http://www.getaprop.com/images/products/bra93 copy.jpg http://www.getaprop.com/content-product_info/product_id-6735/power_tech_bravo_2_propeller.html F-697299 -32007 Force Outboard Propeller Washer... Fits 90-150hp (Daul Exhaust) http://www.getaprop.com/content-product_info/product_id-3030/force_tab_reciever_washer.html http://www.getaprop.com/images/products/F697299.JPG http://www.getaprop.com/content-product_info/product_id-3030/force_tab_reciever_washer.html CM280KITA Volvo Penta 280 Aluminum Anode Kit... V-18 (875815-3) Volvo Penta 250T-280 Outdrive Ring Aluminum Anode 832598 Volvo Penta 200-280 Outdrive Bar Aluminum Anode Volvo Penta 280 Anode Mounting Hardware Aluminum anodes provide good protection in salt or brackish water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-6820/volvo_penta_280_aluminum_kit.html http://www.getaprop.com/images/products/mar6[2].jpg http://www.getaprop.com/content-product_info/product_id-6820/volvo_penta_280_aluminum_kit.html 832598 Volvo Penta 200-280 Outdrive Bar Zinc Anode.. Weight: 1.9 lbs Length: 7.25" Width: 1.25" Height: 0.75" Bolt Circle: 5.75" Hole Dia.: 0.375" All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-8841/volvo_penta_280_zinc_anode.html http://www.getaprop.com/images/products/875815-280SPDP.JPG http://www.getaprop.com/content-product_info/product_id-8841/volvo_penta_280_zinc_anode.html V-18 Volvo Penta 280 & 290 Ring Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2411/volvo_penta_280_290_zinc_anode.html http://www.getaprop.com/images/products/875815VP280290SPDP.JPG http://www.getaprop.com/content-product_info/product_id-2411/volvo_penta_280_290_zinc_anode.html CM290KITA Volvo Penta 290 Aluminum Anode Kit... V-18 (875815-3) Volvo Penta Outdrive Ring Aluminum Anode 852835 Volvo Penta 290 Outdrive Bar Aluminum Anode Volvo Penta 290 Anode Mounting Hardware Aluminum anodes provide good protection in salt or brackish water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-6822/volvo_penta_290_aluminum_kit.html http://www.getaprop.com/images/products/mar10[1].jpg http://www.getaprop.com/content-product_info/product_id-6822/volvo_penta_290_aluminum_kit.html 852835 Volvo Penta 290 Outdrive Bar Zinc Anode.. Weight: 1.9 lbs Length: 5.25" Width: 1.75" Height: 1.125" Bolt Circle: 3.375" Hole Dia.: 0.375" All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-8842/volvo_penta_290_zinc_anode.html http://www.getaprop.com/images/products/852835-290SPDP.JPG http://www.getaprop.com/content-product_info/product_id-8842/volvo_penta_290_zinc_anode.html 872793 Volvo Penta DPX Triangle Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2420/volvo_penta_dpx_zinc_anode.html http://www.getaprop.com/images/products/DPX-1.JPG http://www.getaprop.com/content-product_info/product_id-2420/volvo_penta_dpx_zinc_anode.html CMSXKITA Volvo Penta SX Drive Aluminum Anode Kit... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. Aluminum anodes provide good protection in salt or brackish water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8690/volvo_penta_sx_aluminum_anode_kit.html http://www.getaprop.com/images/products/SXANODE KIT.jpg http://www.getaprop.com/content-product_info/product_id-8690/volvo_penta_sx_aluminum_anode_kit.html 3855411 Volvo Penta SX Drive Transom Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2418/volvo_penta_sx_zinc_anode.html http://www.getaprop.com/images/products/19991[1].jpg http://www.getaprop.com/content-product_info/product_id-2418/volvo_penta_sx_zinc_anode.html 3854130 Volvo Penta SX Gimble Plate Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2419/volvo_penta_sx_zinc_anode.html http://www.getaprop.com/images/products/3854130SX.JPG http://www.getaprop.com/content-product_info/product_id-2419/volvo_penta_sx_zinc_anode.html 3888817 Volvo Penta SX Transome Shield Plate Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-8301/volvo_penta_sx_zinc_anode.html http://www.getaprop.com/images/products/dpsx5.JPG http://www.getaprop.com/content-product_info/product_id-8301/volvo_penta_sx_zinc_anode.html 3888814 Volvo Penta SX Cavitation Plate Zinc Anode... Width 3.50" Length 6.00" Bolt Circle 1.375" Weight 3 lbs All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-8804/volvo_penta_sx_zinc_anode.html http://www.getaprop.com/images/products/VOL3888814.JPG http://www.getaprop.com/content-product_info/product_id-8804/volvo_penta_sx_zinc_anode.html Volvo Penta SX Zinc Anode Kit... 3888814 Volvo Penta SX Gearhouse Zinc Anode 3888817 Volvo Penta SX Transom Shield Zinc Anode. Zinc anodes provide good protection in salt water. Warning: Never mix magnesium, aluminum or zinc anodes. http://www.getaprop.com/content-product_info/product_id-8849/volvo_penta_sx_zinc_anode_kit.html http://www.getaprop.com/images/products/dphkit.JPG http://www.getaprop.com/content-product_info/product_id-8849/volvo_penta_sx_zinc_anode_kit.html V-15 Volvo Penta 100 Ring Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2408/volvo_penta_zinc_anode.html http://www.getaprop.com/images/products/19984[1].jpg http://www.getaprop.com/content-product_info/product_id-2408/volvo_penta_zinc_anode.html V-16 Volvo Penta 200 Ring Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2409/volvo_penta_zinc_anode.html http://www.getaprop.com/images/products/19984[1].jpg http://www.getaprop.com/content-product_info/product_id-2409/volvo_penta_zinc_anode.html 838929 Volvo Penta Engine Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2414/volvo_penta_zinc_anode.html http://www.getaprop.com/images/products/19978[1].jpg http://www.getaprop.com/content-product_info/product_id-2414/volvo_penta_zinc_anode.html 823661 Volvo Penta Diesel Engine Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2412/volvo_penta_zinc_anode.html http://www.getaprop.com/images/products/19976[1].jpg http://www.getaprop.com/content-product_info/product_id-2412/volvo_penta_zinc_anode.html V-17 Volvo Penta 250 & 270 Ring Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2410/volvo_penta_zinc_anode.html http://www.getaprop.com/images/products/19985[1].jpg http://www.getaprop.com/content-product_info/product_id-2410/volvo_penta_zinc_anode.html 24" Ni-Bral 3 Blade Michigan DJX Propeller... EAR= 0.61 Weight 37 Lbs Hub Dia Fwd 3 1/4" Hub Dia Aft 3" Hub Length 4 1/2" Bore Range 1 1/2 " To 2" DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product. The availability of this series will be progressive, with additional sizes being added regularly. Availability will be size specific, in a range of bores, and without or with all degrees of cup. All Getaprop Propellers are Computer Checked and Static Balanced Prior to Shipping... http://www.getaprop.com/content-product_info/product_id-6310/michigan_djx_ni_bral_propeller_24_dia.html http://www.getaprop.com/images/products/djx[1][1].jpg http://www.getaprop.com/content-product_info/product_id-6310/michigan_djx_ni_bral_propeller_24_dia.html Size "F-F1"- Spurs Line Cutter Anode.. Mounting Screw:10-32 x 5/8" flat head socket screw (included) http://www.getaprop.com/content-product_info/product_id-9001/spurs_zinc_anode_f_f1.html http://www.getaprop.com/images/products/sp1 copy.jpg http://www.getaprop.com/content-product_info/product_id-9001/spurs_zinc_anode_f_f1.html Mercury Marine's "New Design" XR Series Bravo-3 Propellers sold in sets. Utilizing the same mounting hardware these new propellers can be used on standard Bravo Three, X and XR. Recommended to run on big boats with big power (496 through 525HP). Enormous cup is built in to the trailing edges of both front and rear props offering tremendous planing performance in addition to some of the best mid-ranging cruising numbers you'll ever see. Top end numbers are generous for most applications and if you plan on switching from the standard Bravo Three (example 26" pitch) to the new Bravo Three XR (plan on running a 25" XR) to match the RPM of the standard 26 pitch. Designed for Bravo Three and Bravo Three XR drives. Designed to run 50+ MPH with maximum boat control. For 300 - 525 HP sterndrive stepped vee & air entrapment hulls Reduces slip for improved cruising & top end speeds. http://www.getaprop.com/content-product_info/product_id-8233/mercury_xr_bravo_3_propeller_set.html http://www.getaprop.com/images/products/merbr3ss.JPG http://www.getaprop.com/content-product_info/product_id-8233/mercury_xr_bravo_3_propeller_set.html Michigan Ballistic-3 XL Stainless Propeller fits 40-140 HP Mercury Outboards... Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8998/michigan_ballistic_xl_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC3-1XL.JPG http://www.getaprop.com/content-product_info/product_id-8998/michigan_ballistic_xl_propeller_mercury.html Michigan Ballistic-3 Stainless Propeller fits 40-140 HP Mercury Outboards... Thru Hub Exhaust & 15 Tooth Spline Included Rubber OEM Hub High Polish Finish 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 High Performance Design Tapered Leading edges minimize drag High Cambered blade sections Maximum efficiency Typical Ballistic applications include Bass, Bay & Flats Boats also Ski and Sport boats. http://www.getaprop.com/content-product_info/product_id-8999/michigan_ballistic_propeller_mercury.html http://www.getaprop.com/images/products/BALLISTIC3-1.JPG http://www.getaprop.com/content-product_info/product_id-8999/michigan_ballistic_propeller_mercury.html Spurs Line Cutter Model F1 Fits 75mm Thru 115mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:75mm Thru 115mm Cutter Hub Diameter:165mm Cutter Width:40mm Min. Space To Install:45mm Cutter Outside Diameter: 280mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1800/spurs_line_cutter_model_f1.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1800/spurs_line_cutter_model_f1.html Spurs Line Cutter Model F Fits 60mm Thru 90mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:60mm Thru 90mm Cutter Hub Diameter:140mm Cutter Width:40mm Min. Space To Install:45mm Cutter Outside Diameter:254mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1794/spurs_line_cutter_model_f.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1794/spurs_line_cutter_model_f.html Spurs Line Cutter Model E Fits 50mm Thru 75mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:70mm Cutter Hub Diameter:110mm Cutter Width:37mm Min. Space To Install:43mm Cutter Outside Diameter: 194mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1792/spurs_line_cutter_model_e.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1792/spurs_line_cutter_model_e.html Spurs Line Cutter Model D Fits 40mm Thru 55mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:40mm Thru 55mm Cutter Hub Diameter:98mm Cutter Width:36mm Min. Space To Install:41mm Cutter Outside Diameter: 171mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1787/spurs_line_cutter_model_d.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1787/spurs_line_cutter_model_d.html Spurs Line Cutter Model C Fits 40mm Thru 50mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:40mm Thru 50mm Cutter Hub Diameter:86mm Cutter Width:35mm Min. Space To Install:39mm Cutter Outside Diameter: 152mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1782/spurs_line_cutter_model_c.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1782/spurs_line_cutter_model_c.html Spurs Line Cutter Model B Fits 20mm Thru 40mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:20mm Thru 40mm Cutter Hub Diameter:67mm Cutter Width:27mm Min. Space To Install:32mm Cutter Outside Diameter:123mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1778/spurs_line_cutter_model_b.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1778/spurs_line_cutter_model_b.html Spurs Line Cutter Model A Fits 20mm Thru 30mm Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:20mm Thru 30mm Cutter Hub Diameter:51mm Cutter Width:24mm Min. Space To Install:30mm Cutter Outside Diameter: 120mm Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1773/spurs_line_cutter_model_a.html http://www.getaprop.com/images/products/spurs_sizes[1].jpg http://www.getaprop.com/content-product_info/product_id-1773/spurs_line_cutter_model_a.html Spurs Line Cutter Model F3 Fits 4"Thru 6 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:4" Thru 6 1/2" Cutter Hub Diameter:9 1/2" Cutter Width:1 7/8" Min. Space To Install:2 1/8" Cutter Outside Diameter: 15 3/4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1769/spurs_line_cutter_model_f3.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1769/spurs_line_cutter_model_f3.html Spurs Line Cutter Model F2 Fits 3" Thru 5 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:3" Thru 5 1/2" Cutter Hub Diameter:7 7/8" Cutter Width:1 11/16" Min. Space To Install:1 7/8" Cutter Outside Diameter: 13 1/2" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1765/spurs_line_cutter_model_f2.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1765/spurs_line_cutter_model_f2.html Spurs Line Cutter Model F1 Fits 3" Thru 4 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter: 3" Thru 4 1/2" Cutter Hub Diameter:6 1/2" Cutter Width:1 9/16" Min. Space To Install:1 3/4" Cutter Outside Diameter: 11" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1758/spurs_line_cutter_model_f1.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1758/spurs_line_cutter_model_f1.html Spurs Line Cutter Model F Fits 2 1/4" Thru 3 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:2 1/4" Thru 3 1/2" Cutter Hub Diameter:5 1/2" Cutter Width:1 9/16" Min. Space To Install:1 3/4" Cutter Outside Diameter:10" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1754/spurs_line_cutter_model_f.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1754/spurs_line_cutter_model_f.html Spurs Line Cutter Model E Fits 2" Thru 3" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:2" Thru 3" Cutter Hub Diameter:4 3/8" Cutter Width:1 1/2" Min. Space To Install:1 11/16" Cutter Outside Diameter: 7 5/8" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1745/spurs_line_cutter_model_e.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1745/spurs_line_cutter_model_e.html Spurs Line Cutter Model D Fits 1 1/2" Thru 2 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:1 1/2" Thru 2 1/2" Cutter Hub Diameter:3 7/8" Cutter Width:1 7/16" Min. Space To Install:1 5/8" Cutter Outside Diameter: 6 3/4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1740/spurs_line_cutter_model_d.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1740/spurs_line_cutter_model_d.html Spurs Line Cutter Model C Fits 1 1/2" Thru 2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:1 1/2" Thru 2" Cutter Hub Diameter:3 3/8" Cutter Width:1 3/8" Min. Space To Install:1 9/16" Cutter Outside Diameter: 6" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1714/spurs_line_cutter_model_c.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1714/spurs_line_cutter_model_c.html Spurs Line Cutter Model B Fits 1" Thru 1 1/2" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter: 1" Thru 1 1/2" Cutter Hub Diameter:2 5/8" Cutter Width:1 1/16" Min. Space To Install:1 1/4" Cutter Outside Diameter: 5" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1708/spurs_line_cutter_model_b.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1708/spurs_line_cutter_model_b.html Spurs Line Cutter Model A Fits 3/4 Thru 1 1/4" Shafts... The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weeds directly into "SPURS" blades, for an instant cut eliminating entanglement or damage to the running gear. Shaft Diameter:3/4" Thru 1 1/4" Cutter Hub Diameter:2" Cutter Width:15/16" Min. Space To Install:1 1/8" Cutter Outside Diameter 4" Wedge Holding Block Sizes: (Right click on enlarged image to print) #AA Height: 0.900" Clearance Height: 1/8" Width: 1 1/4" Length: 3" #1 Height: 1 1/8" Clearance Height: 5/16" Width: 1 3/8" Length: 3 1/4" #2 Height: 1 1/4" Clearance Height: 1/2" Width: 1 5/8" Length: 3 1/2" #3 Height: 1 1/2" Clearance Height: 1/2" Width: 1 3/4" Length: 3 5/8" #3A Height: 2" Clearance Height: 7/8" Width: 1 3/4" Length: 3 11/16" #4 Height: 2 1/8" Clearance Height: 9/16" Width: 2 1/4" Length: 4 5/8" #5 Height: 2 1/2" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" #5A Height: 3 1/8" Clearance Height: 3/4" Width: 2 3/4" Length: 5 1/2" http://www.getaprop.com/content-product_info/product_id-1703/spurs_line_cutter_model_a.html http://www.getaprop.com/images/products/spurs_ph_1[1].jpg http://www.getaprop.com/content-product_info/product_id-1703/spurs_line_cutter_model_a.html 57632-95320 - 35-65hp. Suzuki Propeller Thrust Washer... DT-35C 1987-90 DT40 1983 & Newer DF40 1983 & Newer DF50 All Years DT50,50M 1983-84 DT55 1985-97 DT60 1984-84 DT65 1985-97 http://www.getaprop.com/content-product_info/product_id-3085/suzuki_stopper_57632_95320.html http://www.getaprop.com/images/products/859922.JPG http://www.getaprop.com/content-product_info/product_id-3085/suzuki_stopper_57632_95320.html 57632-96400 - 25-30hp. Suzuki Propeller Thrust Washer... DT 20 & 25 1983-2000 DT 25C 1989 & Newer DT 30-30C 1983-97 DF 25 2000 & Newer DF 30 2000 & Newer http://www.getaprop.com/content-product_info/product_id-3084/suzuki_stopper_57632_96400.html http://www.getaprop.com/images/products/859921.JPG http://www.getaprop.com/content-product_info/product_id-3084/suzuki_stopper_57632_96400.html 57632-93901 - 9.9-15hp. Suzuki Propeller Thrust Washer... DT 9.9, & 15hp 1983-1997 http://www.getaprop.com/content-product_info/product_id-3083/suzuki_stopper_57632_93901.html http://www.getaprop.com/images/products/859920.JPG http://www.getaprop.com/content-product_info/product_id-3083/suzuki_stopper_57632_93901.html 57635-95510 - 75-115hp. Suzuki Propeller Thrust Washer... U-TYPE DT 75, & 115hp. 1992-2001 http://www.getaprop.com/content-product_info/product_id-3086/suzuki_stopper_57635_95510.html http://www.getaprop.com/images/products/859923.JPG http://www.getaprop.com/content-product_info/product_id-3086/suzuki_stopper_57635_95510.html 75-115hp. Suzuki Propeller Spacer... U-TYPE DT 75, & 115hp. http://www.getaprop.com/content-product_info/product_id-3078/suzuki_spacer_57633_95501.html http://www.getaprop.com/images/products/859901.JPG http://www.getaprop.com/content-product_info/product_id-3078/suzuki_spacer_57633_95501.html 57633-94300 - 40-65hp. Suzuki Propeller Spacer... DT 40, & 65hp. http://www.getaprop.com/content-product_info/product_id-3077/suzuki_spacer_57633_94300.html http://www.getaprop.com/images/products/859900.JPG http://www.getaprop.com/content-product_info/product_id-3077/suzuki_spacer_57633_94300.html 57633-93901 - 9.9-15hp Suzuki Propeller Spacer... DT 9.9, & 15 hp http://www.getaprop.com/content-product_info/product_id-3075/suzuki_spacer_57633_93901.html http://www.getaprop.com/images/products/859898.JPG http://www.getaprop.com/content-product_info/product_id-3075/suzuki_spacer_57633_93901.html YENT - 40-115hp. Suzuki Propeller Nut... Fits 40-65hp & 75-115hp V6 http://www.getaprop.com/content-product_info/product_id-3074/suzuki_propeller_nut_yent.html http://www.getaprop.com/images/products/859939.JPG http://www.getaprop.com/content-product_info/product_id-3074/suzuki_propeller_nut_yent.html SBNT - 25-30hp. Suzuki Propeller Nut... Fits DT 25hp, & 30hp. http://www.getaprop.com/content-product_info/product_id-3073/suzuki_propeller_nut_sbnt.html http://www.getaprop.com/images/products/859938.JPG http://www.getaprop.com/content-product_info/product_id-3073/suzuki_propeller_nut_sbnt.html SANT - 9.9-15hp Suzuki Propeller Nut... Fits DT 9.9hp, & 15hp. http://www.getaprop.com/content-product_info/product_id-3072/suzuki_propeller_nut_sant.html http://www.getaprop.com/images/products/859937.JPG http://www.getaprop.com/content-product_info/product_id-3072/suzuki_propeller_nut_sant.html 57633-96300 - 25-30hp Suzuki Propeller Spacer... DT 25, & 30hp. http://www.getaprop.com/content-product_info/product_id-3076/suzuki_spacer_57633_96300.html http://www.getaprop.com/images/products/859899.JPG http://www.getaprop.com/content-product_info/product_id-3076/suzuki_spacer_57633_96300.html 2" Max. Shaft Diameter Brute Propeller Puller W/ Pointed Bolt... Getaprop Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. http://www.getaprop.com/content-product_info/product_id-1238/pro_pull_119.html http://www.getaprop.com/images/products/ppf119_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1238/pro_pull_119.html 1 1/2" Max. Shaft Diameter Brute Propeller Puller W/ Pointed Bolt... GetaProp Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. http://www.getaprop.com/content-product_info/product_id-1237/pro_pull_118.html http://www.getaprop.com/images/products/ppf118_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1237/pro_pull_118.html 3" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1242/pro_pull_116.html http://www.getaprop.com/images/products/ppf116_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1242/pro_pull_116.html (3/4 - 2) Shaft diameter Versatile propeller puller... GetaProp Versatile propeller puller is designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. Its made of high strength heat-treated alloy steel and finished with cadmium for protection. The threaded rods, pivot pins and handle are manufactured using the finest stressproof steels available. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it cant slip off while in use. The offset design of the pivot pins keep the hook of the tool on the propeller hub and pulls through the center of the propeller shaft. Minimal clearance between the propeller hub and strut are required due to the unique puller design. This propeller puller requires no addional tools for operation. http://www.getaprop.com/content-product_info/product_id-1244/pro_pull_113.html http://www.getaprop.com/images/products/ppf113_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1244/pro_pull_113.html 1 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1239/pro_pull_103.html http://www.getaprop.com/images/products/ppf103_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1239/pro_pull_103.html 2 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1241/pro_pull_104.html http://www.getaprop.com/images/products/ppf104_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1241/pro_pull_104.html 1 1/4" - 2 1/2" 10 Ton Chain Propeller Puller... GetaProp 10 Ton Chain propeller puller is designed to remove 2, 3, 4, 5 and 6 blade propellers on inboard shafts ranging from 1 1/4 - 2 1/2. Its made of high strength heat-treated allow steel and finished with cadmium for protection. The chains are grade 70 transport rated and are plated with cadmium. All bolts, nuts and threaded parts are either grade 5 or heat-treated allow steel finished with cadmium. Four propeller shaft adapters are used to set puller up for a specific shaft size and/or if propeller blades extend forward of the propeller hub. Four hooks with safety rings are used on propellers that have no clearance between the propeller hub and the strut. The chains conform to propeller blades that overlap to accomodate easy propeller removal without damage to the blades. Complete with zinc plated case hardened box wrench to operate puller a container of waterproof grease, waterproof tool box and instructions with diagrams for use. http://www.getaprop.com/content-product_info/product_id-1243/pro_pull_106.html http://www.getaprop.com/images/products/ppf106_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1243/pro_pull_106.html 2" Max. Shaft Diameter Heavy-Duty Propeller Puller... GetaProp Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. http://www.getaprop.com/content-product_info/product_id-1240/pro_pull_107.html http://www.getaprop.com/images/products/ppf107_small[1].jpg http://www.getaprop.com/content-product_info/product_id-1240/pro_pull_107.html YAWS - 9.9-15hp. Yamaha Propeller Washer... http://www.getaprop.com/content-product_info/product_id-8975/yamaha_washer.html http://www.getaprop.com/images/products/859905.JPG http://www.getaprop.com/content-product_info/product_id-8975/yamaha_washer.html YEWS - 100-300hp. Yamaha Propeller Washer... http://www.getaprop.com/content-product_info/product_id-8974/yamaha_washer.html http://www.getaprop.com/images/products/859905.JPG http://www.getaprop.com/content-product_info/product_id-8974/yamaha_washer.html YCWS - 40-60hp. Yamaha Propeller Washer... 40,50.55,60hp http://www.getaprop.com/content-product_info/product_id-8972/yamaha_washer.html http://www.getaprop.com/images/products/859906.JPG http://www.getaprop.com/content-product_info/product_id-8972/yamaha_washer.html YDWS - 60-100HP Yamaha Propeller Washer... http://www.getaprop.com/content-product_info/product_id-8971/yamaha_washer.html http://www.getaprop.com/images/products/859907.JPG http://www.getaprop.com/content-product_info/product_id-8971/yamaha_washer.html YATW - 9.9-15hp. Yamaha Propeller Thrust Washer... http://www.getaprop.com/content-product_info/product_id-8980/yamaha_thrust_washer.html http://www.getaprop.com/images/products/859916.JPG http://www.getaprop.com/content-product_info/product_id-8980/yamaha_thrust_washer.html YBTW - 25-30hp. Yamaha Propeller Thrust Washer... 25 & 30hp. http://www.getaprop.com/content-product_info/product_id-8979/yamaha_thrust_washer.html http://www.getaprop.com/images/products/859917.JPG http://www.getaprop.com/content-product_info/product_id-8979/yamaha_thrust_washer.html YCTW - 40-60hp. Yamaha Propeller Thrust Washer... 40,50,55,60HP. http://www.getaprop.com/content-product_info/product_id-8978/yamaha_thrust_washer.html http://www.getaprop.com/images/products/859918.JPG http://www.getaprop.com/content-product_info/product_id-8978/yamaha_thrust_washer.html YDTW - 60-100hp. Yamaha Propeller Thrust Washer... T50 HP 1996 and Newer 60 HP 1992 and Newer 70 HP 1984 and Newer 75 HP 1994 and Newer 80 HP 1997 85 HP 1991-97 90 HP 1984 and Newer FS80 (Four Stroke) 1999-2002 FS90 (Four Stroke) 1999 and Newer FS100 (Four Stroke) 1999 and Newer http://www.getaprop.com/content-product_info/product_id-8977/yamaha_thrust_washer.html http://www.getaprop.com/images/products/859919.JPG http://www.getaprop.com/content-product_info/product_id-8977/yamaha_thrust_washer.html YETW - 100-300hp. Yamaha Propeller Thrust Washer... http://www.getaprop.com/content-product_info/product_id-8976/yamaha_thrust_washer.html http://www.getaprop.com/images/products/YETW.jpg http://www.getaprop.com/content-product_info/product_id-8976/yamaha_thrust_washer.html YCSP - 40-60hp. Yamaha Propeller Spacer... 40,50,55,60hp. http://www.getaprop.com/content-product_info/product_id-8983/yamaha_spacer.html http://www.getaprop.com/images/products/589896.JPG http://www.getaprop.com/content-product_info/product_id-8983/yamaha_spacer.html YDSP - V4-V6 Yamaha Propeller Spacer... 100-300hp. all years. http://www.getaprop.com/content-product_info/product_id-8982/yamaha_spacer.html http://www.getaprop.com/images/products/859897.JPG http://www.getaprop.com/content-product_info/product_id-8982/yamaha_spacer.html YBSP - 20-30HP. Yamaha Propeller Spacer... http://www.getaprop.com/content-product_info/product_id-8981/yamaha_spacer.html http://www.getaprop.com/images/products/YBSP.jpg http://www.getaprop.com/content-product_info/product_id-8981/yamaha_spacer.html YENT - V4-V6 Yamaha Propeller Nut... 100-300hp all years http://www.getaprop.com/content-product_info/product_id-8987/yamaha_propeller_nut.html http://www.getaprop.com/images/products/859935.JPG http://www.getaprop.com/content-product_info/product_id-8987/yamaha_propeller_nut.html YANT - 8-15hp. Yamaha Propeller Castle Nut... 8, 9.9, & 15hp http://www.getaprop.com/content-product_info/product_id-8986/yamaha_propeller_nut.html http://www.getaprop.com/images/products/859933.JPG http://www.getaprop.com/content-product_info/product_id-8986/yamaha_propeller_nut.html YBNT - 20-30hp Yamaha Propeller Castle Nut... http://www.getaprop.com/content-product_info/product_id-8985/yamaha_propeller_nut.html http://www.getaprop.com/images/products/859934.JPG http://www.getaprop.com/content-product_info/product_id-8985/yamaha_propeller_nut.html YCNT - 40-100hp. Yamaha Propeller Castle Nut... 40,50,55,60-F100 http://www.getaprop.com/content-product_info/product_id-8984/yamaha_propeller_nut.html http://www.getaprop.com/images/products/859935.JPG http://www.getaprop.com/content-product_info/product_id-8984/yamaha_propeller_nut.html 98432 Mercury & Mariner 18-25HP Trim Tab Zinc Anode... All our Zincs Anodes meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001. http://www.getaprop.com/content-product_info/product_id-2341/mercury_mariner_trim_tab_zinc_anode.html http://www.getaprop.com/images/products/mer8.JPG http://www.getaprop.com/content-product_info/product_id-2341/mercury_mariner_trim_tab_zinc_anode.html 4011912 Mercury/Mariner Propeller Nut... 18-25hp.(1980 to present) http://www.getaprop.com/content-product_info/product_id-3041/mercury_mariner_nut.html http://www.getaprop.com/images/products/11-40119-12.JPG http://www.getaprop.com/content-product_info/product_id-3041/mercury_mariner_nut.html 4.75" Yanmar Solid Propeller Shaft Coupling... Shaft Range: 1" Thru 1 3/4" Flange Diameter:4 3/4" Bolt Diameter:10mm # of Bolts:4 Bolt Circle:3.937" Pilot Diameter:2.556" x 1/8" M Coupling Length:2 3/8" http://www.getaprop.com/content-product_info/product_id-6951/yanmar_solid_coupling_4_75.html http://www.getaprop.com/images/products/93325_B_A_50MC_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-6951/yanmar_solid_coupling_4_75.html 4.75" Yanmar Split Propeller Shaft Coupling... Bore Range: 1" Thru 1 1/2" Flange Diameter:4 3/4" Bolt Diameter:10mm" # of Bolts:4 Bolt Circle:3.937" Pilot Diameter:2.556" x 1/8" M Coupling Length:3 7/16" http://www.getaprop.com/content-product_info/product_id-6995/yanmar_split_coupling_4_75.html http://www.getaprop.com/images/products/61616[1].jpg http://www.getaprop.com/content-product_info/product_id-6995/yanmar_split_coupling_4_75.html 8099666A02 Mercruiser Bravo 3 Propeller Nut Kit High quality bronze CNC machined with Aluminum Anode for salt water... This nut is required for added anode protection on bravo three drives. Requires propeller nut anode size "D" included. Replaces the aft or rear propeller nut on all bravo three drives. Nut Size: 7/8 X 14 NF-RH Installation Socket/Wrench: 1 7/16" http://www.getaprop.com/content-product_info/product_id-6174/bravo_three_propeller_nut_kit.html http://www.getaprop.com/images/products/brv3nut[1].jpg http://www.getaprop.com/content-product_info/product_id-6174/bravo_three_propeller_nut_kit.html Volvo Penta Type "G" Duo-Prop Nibral Propeller Set for Volvo Penta DPH Drive... The combination of a 3-blade front and a 4-blade rear propeller, is the key to the tremendous grip in the water. The new generation DP propellers has been specially developed to handle the tremendous torque and power from the D4 and D6 engines. Performance is outstanding and the special nickel-bronze-bronze (Nibral) alloy complete with full electric isolation ensures no growth and excellent corrosion resistance. http://www.getaprop.com/content-product_info/product_id-7362/volvo_penta_dp_g_set.html http://www.getaprop.com/images/products/DPG1.jpg http://www.getaprop.com/content-product_info/product_id-7362/volvo_penta_dp_g_set.html Volvo Penta Type "XDP" Duo-Prop Single Composit Propeller for Volvo Penta XDP/DPS... Volvo Penta's new X-Series Composite DuoProp Propeller is perfect for Volvo Penta 4.3L and 5.0L gasoline engines with XDP or DPS DuoProp Sterndrive. This propeller features a tensile strength 10 to 15% greater than aluminum, with performance to match. This composite material will not corrode or suffer cavitation burning the way stainless and aluminum props can. Composite construction also provides the ability to change blades too, dramatically reducing repair time and costs. By changing blade sizes, you can customize your boat for the day s specific activity - a lower pitch for waterskiing, and a higher pitch for cruising. Different sizes are provided for different needs. The X Series Volvo Dup Prop can be used in place of the "D" & "F" series but NOT "A", "B" or "C" Series. http://www.getaprop.com/content-product_info/product_id-7855/volvo_penta_xdp_single_prop.html http://www.getaprop.com/images/products/VP.jpg http://www.getaprop.com/content-product_info/product_id-7855/volvo_penta_xdp_single_prop.html 4" Yanmar Solid Propeller Shaft Coupling... Shaft Range:3/4" Thru 1 1/4" Flange Diameter:4" Bolt Diameter:10mm # of Bolts:4 Bolt Circle:3.070" Pilot Diameter:1.966" x 5/32M Coupling Length:2 1/4" http://www.getaprop.com/content-product_info/product_id-6950/yanmar_solid_coupling_4.html http://www.getaprop.com/images/products/93325_B_A_50MC_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-6950/yanmar_solid_coupling_4.html 4"VX Volvo Solid Propeller Shaft Coupling... Shaft Range: 3/4" Thru 1 1/4" Flange Diameter:4" Bolt Diameter:10mm # of Bolts:4 Bolt Circle:3.142" Pilot Diameter:2.366" x 3/32F Coupling Length:2 7/32" http://www.getaprop.com/content-product_info/product_id-6949/volvo_solid_coupling_4.html http://www.getaprop.com/images/products/93325_B_A_50MC_WPM[1].jpg http://www.getaprop.com/content-product_info/product_id-6949/volvo_solid_coupling_4.html 4"YS Yanmar Split Propeller Shaft Coupling... Bore Range: 3/4" Thru 1 1/4" Flange Diameter:4" Bolt Diameter:10mm # of Bolts:4 Bolt Circle:3.070" Pilot Diameter:1.966" x 5/32M Coupling Length:2" http://www.getaprop.com/content-product_info/product_id-6994/yanmar_split_coupling_4.html http://www.getaprop.com/images/products/61616[1].jpg http://www.getaprop.com/content-product_info/product_id-6994/yanmar_split_coupling_4.html OEM # 19644002660/90 Yanmar Sail Drive Split Ring Zinc Anode kit with adaptors... 19644002690-1 Yanmar Adaptor with Hardware (2 piece) 19644002660 Yanmar Split Ring Zinc (2 piece) Fits Yanmar SD20, SD30, SD31, SD40 and SD50 saildrives. Complete Kit with Adaptors to change zincs without removing the Propeller.... Replacement split anodes for Yanmar Sail Drive. Priced as set of two Zincs Anodes and two adaptors. http://www.getaprop.com/content-product_info/product_id-8912/yanmar_sail_drive_split_ring_zinc_kit.html http://www.getaprop.com/images/products/YAN ZINC.JPG http://www.getaprop.com/content-product_info/product_id-8912/yanmar_sail_drive_split_ring_zinc_kit.html 19644002690 Yanmar Sail Drive Split Ring Zinc adaptor kit... 19644002690-1 Yanmar Adaptor with Hardware (2 piece) Fits Yanmar SD20, SD30, SD31, SD40 and SD50 saildrives. Adaptors to change zincs without removing the Propeller.... Priced as set of two adaptors. http://www.getaprop.com/content-product_info/product_id-8913/yanmar_sail_drive_zinc_adaptor_kit.html http://www.getaprop.com/images/products/yadptor.JPG http://www.getaprop.com/content-product_info/product_id-8913/yanmar_sail_drive_zinc_adaptor_kit.html Long Hub Aluminum High Speed Propeller For SP200-290 Drives... Closeout item (Limited to stock on hand...) High gloss black powder coat finish minimizes speed loss from drag and protects aluminum propeller Cushioned rubber hub absorbs impact and reduces the potential for lower unit damage. Michigan Match propellers are backed by Michigan Wheel's limited lifetime warranty. http://www.getaprop.com/content-product_info/product_id-6779/michigan_long_hub_propeller_volvo.html http://www.getaprop.com/images/products/mwcvolvo.JPG http://www.getaprop.com/content-product_info/product_id-6779/michigan_long_hub_propeller_volvo.html 14.00 X 09 Mercury Black Max Propeller.. Thru Hub Exhaust & 15 Tooth Spline Interchangable Hub System Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-8894/black_max_propeller_48_854340a45.html http://www.getaprop.com/images/products/mbm.jpg http://www.getaprop.com/content-product_info/product_id-8894/black_max_propeller_48_854340a45.html 15.50 X 15 Mercury Black Max Propeller Fits 135-275 HP Mercury Outboards... Interchangeable Hub System Requires XHS Hub Kit # 102 (Not Included) Thru-Hub Exhaust & 15 Tooth Spline 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer All-purpose 3-blade aluminum propeller Inexpensive and easy to repair Recommended for speeds less than 50 MPH and applications less than 250 HP http://www.getaprop.com/content-product_info/product_id-8546/black_max_propeller_48_78116a45.html http://www.getaprop.com/images/products/mbm.jpg http://www.getaprop.com/content-product_info/product_id-8546/black_max_propeller_48_78116a45.html 13.25 X 17 Mercury Black Max Propeller.. Thru Hub Exhaust & 15 Tooth Spline Interchangable Hub System Requires XHS Hub Kit # 102 (Not Included) 40,50,60HP (Big Foot, 4-stroke All Years) 60HP (Sea Pro/Marathon) '95 & Newer 70HP '87-'89 75HP(2&4-stroke) '84 & Newer 80HP '78-'89 90HP (2&4-stroke '78 & Newer 100HP '88 & Newer 115HP '78 & Newer 115HP 4-stroke '01 & Newer 125HP '94 & Newer 140HP (Includes Sea Pro & Offshore) '78-'81 650 2 Cyl thru '71 800-850 6 cyl thru '72 800-850 4 cyl '72-'77 900-1500 Models thru '77 80HP Mariner '78-'83 http://www.getaprop.com/content-product_info/product_id-8893/black_max_propeller_48_77344a45.html http://www.getaprop.com/images/products/mbm.jpg http://www.getaprop.com/content-product_info/product_id-8893/black_max_propeller_48_77344a45.html 10.00 X 19 Mercury Black Max Propeller fits 25-70 HP Mercury Outboards... Thru-Hub Exhaust & 13 Tooth Spline Rubber Hub Bushing Included Model 402-500-700 '77-'84 25 HP Bigfoot(4-stroke) '99-Newer 30HP (2&4 Stroke) '94-Newer 30HP(Sea Pro/Marathon) '94-Newer 35HP '84-'89 40HP (2&4 Stroke)(Not Bigfoot) '77 & Newer 40HP (Sea Pro/Marathon) '77 & Newer 45HP '86-'89 48HP (Mariner) All Years 50HP (2&4-Stroke)(Not Bigfoot) '77 & Newer 55HP (Mercury/Sea Pro Marathon) '95 & Newer 60HP (Not Bigfoot or Sea Pro '78 & Newer 70 HP thru '83 Bigfoot 40-60 hp Uses 40-140 Section http://www.getaprop.com/content-product_info/product_id-8342/black_max_propeller_48_73146a40.html http://www.getaprop.com/images/products/mbm.jpg